Search NASA⌕ Search

SEARCH · Search NASA

Results for “Arrhenius”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3

The reaction of OH with NO2

NO2 was photolyzed with 2288A radiation at 300 and 423 K in the presence of H2O, CO, and in some cases excess He. The photolysis produces O(1D) atoms which react with H2O to give HO radicals or are deactivated by CO to O(3P) atoms. The ratio k sub 5/k sub 3 is temperature dependent, being 0.33 at 300 K and 0.60 at 423 K. From these two points the Arrhenius expression is estimated to be k sub 5/k sub 3 = 2.6 exp(-1200/RT) where R is in calories/mole - K. The OH radical is either removed by NO2 or reacts with CO.

Simonaitis, R.↗

Further analytical study of hybrid rocket combustion

Analytical studies of the transient and steady-state combustion processes in a hybrid rocket system are discussed. The particular system chosen consists of a gaseous oxidizer flowing within a tube of solid fuel, resulting in a heterogeneous combustion. Finite rate chemical kinetics with appropriate reaction mechanisms were incorporated in the model. A temperature dependent Arrhenius type fuel surface regression rate equation was chosen for the current study. The governing mathematical equations employed for the reacting gas phase and for the solid phase are the general, two-dimensional, time-dependent conservation equations in a cylindrical coordinate system. Keeping the simplifying assumptions to a minimum, these basic equations were programmed for numerical computation, using two implicit finite-difference schemes, the Lax-Wendroff scheme for the gas phase, and, the Crank-Nicolson scheme for the solid phase.

Hung, W. S. Y.↗

Kinetics of the reaction OH (v equals 0) plus O3 yields HO2 plus O2

The rate constant (kl) of the reaction OH(v=o) + O3 yields HO2 + O2 measured over the temperature range 220 to 450 K at total pressures between 2 and 5 torr using ultraviolet fluorescent scattering for the detection of OH radicals. An Arrhenius expression was obtained, and the rate constant for the reaction HO2 + O3 yields OH + 2O2 was inferred to be less than 0.1 kl over the entire temperature interval.

Anderson, J. G.↗

Estimation of rate constants of elementary processes - A review of the state of the art.

'Thermochemical kinetics,' the codification and extrapolation of empirical observations, as applied to certain elementary reactions of importance to combustion studies, is described. This approach allows the critical scrutiny of experimental data in areas where sufficient previous data exist, while, at the same time, illuminating those key areas where more experimentation is crucial. It is shown that combination of transition-state theory with an understanding of the molecular basis of entropy puts fairly rigid constraints on the values of the Arrhenius A-factor for most reactions. This, in turn, means that the activation energy is often the key datum that is missing, and that such data can be obtained with some degree of confidence, even from measurements of rate constants at only one temperature. In complex mechanisms, it is often possible to distinguish among alternate pathways and pinpoint key processes.

Golden, D. M.↗

Heat transfer model for predicting squib ignition times

A squib ignition model based on transient heat condition from the hot bridgewire to the pyrotechnic is described. No Arrhenius-type chemical reaction is included. Instead, a thermal contact resistance is postulated to exist between the hot bridgewire and the pyrotechnic. Ignition is assumed to occur when a 2.5 micron layer of pyrotechnic next to the bridgewire reaches a characteristic ignition temperature for that pyrotechnic. This model was applied to the JPL squib, which uses a 50 micron (0.002-in.) diameter Tophet A bridgewire to ignite a boron, potassium perchlorate mix. A computer program was utilized that solves the transient heat condition problem with the boundary conditions stipulated by the model. The thermal contact conductance at the interface was determined by trial and error so that the experimentally determined ignition time for one firing condition would be properly predicted by the model. The agreement was quite good for tests run between -129 C and +93.3 C at current levels of 3.5 and 5 A. Axial heat conduction along the bridgewire is shown to be negligible.

Sernas, V.↗

Determination of life for a polyimide-epoxy alternator insulation system

Tests were conducted to predict remaining electrical insulation life of a polyimide epoxy insulated 60 KW, 208 volt homopolar inductor alternator, following completion of 23,130 hours of turbo-alternator endurance tests. The sectioned armature winding of this alternator stator was used as means to evaluate and measure end-life at several aging temperatures for development of an Arrhenius plot. A one-half life rate of 11.3 C was established from these data with a predicted remaining life of 60,000 hours at an armature winding temperature of 248 C and a total life, including endurance test time, of 61,645 hours.

Penn, W. B.↗

Hydrogen transport in alpha titanium

Permeation experiments after nitriding the inlet surface of a hollow cylindrical membrane were conducted. Permeation data on two additional specimens given pre-oxidation or pre-nitriding treatments at both inlet and outlet surfaces are presented in terms of Arrhenius plots. Additionally, an analysis of geometry dependence on permeation rate was made for several specimens including the ones mentioned above. For simplicity in this report, the term as-polished is used to refer to a specimen which is either as-polished or is as-polished, pre-oxidized and annealed.

Johnson, D. L.↗

Dynamically plausible hypotheses of lunar origin

The implausibility of the capture hypothesis of lunar origin is pointed out. The reason for this implausibility is the extreme weakness of the only known energy sink for pure capture, tidal friction. A mechanism proposed by Alfven and Arrhenius (1972) is the locking of the moon in synchronization with a longitudinal variation in the earth's gravitational field. It is shown that collision with preexisting satellite matter is the most effective means of capturing a moon.

Kaula, W. M.↗

A flash photolysis-resonance fluorescence kinetics study of the reaction S/3P/ + OCS

Using the technique of flash photolysis-resonance fluorescence, the reaction of ground-state atomic sulfur with carbonyl sulfide has been investigated over the temperature range from 233 to 445 K. Over this temperature range, the experimental data were fitted to an Arrhenius equation of the form k sub 1 = (1.52 plus or minus 0.20) x 10 to the minus 12th power exp(-3.63 plus or minus 0.12 kcal/mol/RT) cu cm/molecule/sec. A comparison of these results with previous investigations on this reaction system is presented.

Klemm, R. B.↗

Isothermal transitions of a thermosetting system

A study of the curing reactions of a cycloaliphatic epoxy resin/anhydride system by torsional braid analysis showed the existence of two critical isothermal temperatures - namely, the maximum glass transition temperature of the thermoset system and the glass transition temperature of the material at its gel point. Two rheologically active kinetic transitions occur during isothermal cure which correspond to gelation and vitrification. Three types of isothermal behavior occur. Methods for determining the time to gel and the time to vitrify, and also the two above-mentioned critical isothermal temperatures, have been developed. The time to gel obeyed the Arrhenius relationship, whereas the time to vitrify passed through a minimum. Application of these results to thermosetting systems in general is discussed in terms of the influence of molecular structure on the values of the critical isothermal temperatures.

Gillham, J. K.↗

Rate of recombination of oxygen atoms and CO at temperatures below ambient

The measurements reported were conducted with 30.0 torr CO, 40.0 torr argon, and varying amounts of carbon dioxide from about 20 to 230 torr. Measurements were made at 277, 272, 263, and 257 K. The pseudo-first-order decay rate as a function of carbon dioxide pressure is shown in a graph. An Arrhenius plot for the rate constants obtained from the measurements is also presented. A value for the activation energy was determined on the basis of a linear least-squares fit to the data.

Inn, E. C. Y.↗

Absolute rate parameters for the reaction of ground state atomic oxygen with carbonyl sulfide

The rate parameters for the reaction of O(3P) with carbonyl sulfide, O(3P) + OCS yields CO + SO, have been determined directly by monitoring O(3P) using the flash photolysis-resonance fluorescence technique. The value for reaction rate was measured over a temperature range of 263-502 K and the data were fitted to an Arrhenius expression with good linearity. A comparison of the present results with those from previous studies of this reaction is also presented.

Klemm, R. B.↗

Planetary accretions in jet streams

The problem of planetary accretion in a jet stream is studied using the model developed by Alfven and Arrhenius. We find that there are basically three types of planetary accretion, corresponding to cases where the characteristic time of the occurrence of catastrophic accretion is less than, equal to, or greater than the time-scale of mass injection to the planetary system (300 m.y.). These different time scales of accretion are found to be closely related to the primordial thermal profiles and equatorial inclinations of the planets. Finally, Venus' retrograde rotational spin is shown to be a possible result of accretion process in a jet stream.

Ip, W.-H.↗

A study of the Sabatier-methanation reaction kinetics

The kinetics of the Sabatier methanation reaction, the reduction of carbon dioxide with hydrogen to methane and water, was investigated for 58 percent nickel on kieselguhr catalyst and 20 percent ruthenium on alumina catalyst. Differential rate data from an experimental program were correlated with a power function rate equation both for forward and reverse reactions. The kinetic parameters of activation energy, frequency rate constant and reaction order were determined for the rate equation. The values of these parameters were obtained from an Arrhenius plot of the experimental differential rate data. Also the carbon monoxide side reaction effect was measured and included in the correlation of parameters. The reaction was found to fit the rate equation experimentally within the temperature range 421 K, where the reaction effectively begins, the 800 K where the reaction rate drops and departs from the rate equation form.

Verostko, C. E.↗

A search for chemical laser action in low pressure metal vapor flames

Optical emissions were studied from low pressure (approximately 1 torr) dilute diffusion flames of Ca and Mg vapor with O2, N2O and mixtures of CCl4 and O2. The Ca flames with O2 and N2O revealed high vibrational excitation of the product CaO molecule (up to v=30). The flames with CCl4 revealed extreme nonequilibrium metal atom electronic excitation, up to the metal atom ionization limit (6.1 eV for Ca, 7.6 eV for Mg). The metal atom excited electronic state populations did not follow a Boltzmann distribution, but the excitation rates ('pumping rate') were found to obey an Arrhenius-type expression, with the electronic excitation energy playing the role of activation energy and a temperature of about 5000 K for triplet excited states and 2500 K for singlets (vs. approximately 500 K translational temperature).

Zwillenberg, M. L.↗

Precipitation of silicon from splat-cooled Al-Si alloys

Splat cooled Al-Si solid solutions with 1 to 11 at.% Si were prepared and their precipitation kinetics were studied by transmission electron microscopy. The time required for appearance of particles visible at a magnification of 35,000 times was determined at temperatures between 248 K and 573 K. The resulting Arrhenius plots yielded activation energies ranging from 55 to 40 plus or minus 2kJ/mol over the composition range. Precipitate densities were higher and denuded zones of 100 to 150 nm were narrower than in comparable solid quenched samples. The activation energies are explained in terms of excess point defect concentrations.

Matyja, H.↗

Absolute rate parameters for the reaction of atomic hydrogen with hydrazine

Absolute rate parameters for the reaction of atomic hydrogen with hydrazine H + N2H4 yields H2 + N2H3 have been determined in a direct manner using flash photolysis of dilute mixtures of hydrazine in helium and time dependent observation of H via resonance fluorescence. By measuring the H-atom decay under pseudo-first-order conditions, the bimolecular rate constant K sub 1 was obtained over the temperature range 228-400 K. The data were fitted with good linearity to the Arrhenius expression K sub 1 = (9.87 plus or minus 1.17) x 10 to the -12th exp(-2380 plus or minus 100/RT) cu cm/molecule/s. The data were shown to be free of any contributions from secondary reactions involving H as a reactant or product.

Stief, L. J.↗

Rate of the reaction of atomic hydrogen with propyne over an extended pressure and temperature range

The technique of flash photolysis coupled with time resolved detection of H via resonance fluorescence has been used to obtain rate constants for the reaction of atomic hydrogen with propyne at temperatures from 215 to 460 K and at pressures in the range 5-600 torr. The rate constants are strongly pressure dependent and the high pressure limiting values give rise to the Arrhenius expression K = approximately 6 x 10 to the minus 11th exp(-2450T) cu cm per molecule per sec. The results are discussed and compared with those of previous studies

Whytock, D. A.↗