Search NASA⌕ Search

SEARCH · Search NASA

Results for “BEAMS, THIN - WEBS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
NASA NTRS1953

Transverse vibrations of hollow thin-walled cylindrical beams

The variational principle, differential equations, and boundary conditions considered appropriate to the analysis of transverse vibrations of hollow thin-walled cylindrical beams are shown. General solutions for the modes and frequencies of cantilever and free-free cylindrical beams of arbitrary cross section but of uniform thickness are given. The combined influence of the secondary effects of transverse shear deformation, shear lag, and secondary effects of transverse shear deformation, shear lag, and longitudinal inertia is shown in the form of curves for cylinders of rectangular cross section and uniform thickness. The contribution of each of the secondary effects to the total reduction in the actual frequency is also indicated. (author)

Budiansky, Bernard↗
NASA NTRS1991

Extension-bend-twist coupling behavior of thin-walled advanced composite beams with initial twist

An analytical model is developed for assessing the extension-bend-twist coupling behavior of nonhomogeneous anisotropic beams with initial twist. The model is formulated as a coupled two-dimensional boundary value problem, where the displacement solutions are defined with pretwist-dependent functions that represent the extension, bending, and torsion, and unknown functions that represent local in-plane deformations and out-of-plane cross-section warping. The unknown deformation functions are determined by applying the principle of minimum potential energy to a discretized representation of the cross section. Numerical results are presented that fully verify this approach and illustrate the strong extension-twist coupling behavior present in pretwisted beams with thin-wall laminated composite cross sections as a function of ply angle, initial twist level, and initial twist axis location. Cross-sections analyzed include; thin laminated rectangles with either asymmetric or symmetric ply stacking sequences and a thin-wall single cell D-section composed of a graphite/epoxy woven cloth.

Kosmatka, J. B.↗
NASA NTRS1984

Single beam synthesis from thinned arrays

Radio astronomers have investigated spatial frequencies and their relationship to apertures with the objective to improve the resolution in radio observations. Welch (1965) has related Fourier transform theory developed for linear communications to aperture design problems, while Fakley (1959) has conducted a comparison between the performances of a time-averaged product array and an intraclass correlator. The present investigation is concerned with an approach which resembles very closely the intraclass correlator system considered by Fakley. A description is presented of a process whereby a thinned array of elements samples selected spatial frequencies from a uniform signal wave front incident on the array. The spatial frequencies are used to generate a set of synthetic spatial frequencies which behave as though they had been sampled by a fully filled array. Beam formation is obtained by summing the set of synthetic spatial frequencies.

Kaiser, J. A., Jr.↗
NASA NTRS1989

Dynamic testing of thin-walled composite box beams in a vacuum chamber

Vibration characteristics of thin-walled composite box beams are measured in a rotating environment in a 10-ft diameter vacuum chamber. Symmetric and antisymmetric layup beams are fabricated out of graphite/epoxy prepreg material using an autoclave molding technique. These are excited using piezoelectric ceramic elements and responses are measured using strain gages and accelerometers. First three natural modes are identified using spectrum analyzer over a range of rotational speeds up to 1000 rpm. Measured frequencies and mode shapes (displacement as well as strain) are correlated satisfactorily with calculated finite element results.

Chandra, Ramesh↗
NASA NTRS1976

Electron beam irradiation of thinned backside illuminated CCDs

The physical properties of backside illuminated surface channel CCD arrays and a pixel buried channel CCD array when bombarded with electrons were studied. The devices were mounted in a high vacuum system and irradiated with electrons generated by an electron gun. Basic measurements of EBS gain, dead voltage, transfer efficiency and dark current were performed to verify proper device operation. The surface channel devices were then irradiated with electrons of up to 8 keV energy for up to 98 hours while the buried channel device was irradiated with electrons.

Borsuk, G. M.↗
NASA NTRS1990

Some optical and electron microscope comparative studies of excimer laser-assisted and nonassisted molecular-beam epitaxically grown thin GaAs films on Si

The quality of GaAs thin films grown via MBE under pulsed excimer laser irradiation on Si substrates is examined in both laser-irradiated and nonirradiated areas using Raman scattering, Rayleigh scattering, and by photoluminescence (PL), as a function of temperature, and by TEM. The temperature dependence of the PL and Raman peak positions indicates the presence of compressive stress in the thin GaAs films in both laser-irradiated and nonirradiated areas. This indicates incomplete homogeneous strain relaxation by dislocations at the growth temperature. The residual compressive strain at the growth temperature is large enough such that even with the introduction of tensile strain arising from the difference in thermal expansion coefficients of GaAs and Si, a compressive strain is still present at room temperature for these thin GaAs/Si films.

Lao, Pudong↗
NASA NTRS1985

Ion beam sputter-deposited thin film coatings for protection of spacecraft polymers in low Earth orbit

Ion beam sputter-deposited thin films of Al2O3, SiO2, and a codeposited mixture of predominantly SiO2 with small amounts of a fluoropolymer were evaluated both in laboratory plasma ashing tests and in space on board shuttle flight STS-8 for effectiveness in preventing oxidation of polyimide Kapton. Measurements of mass loss and optical performance of coated and uncoated polyimide samples exposed to the low Earth orbital environment are presented. Optical techniques were used to measure loss rates of protective films exposed to atomic oxygen. Results of the analysis of the space flight exposed samples indicate that thin film metal oxide coatings are very effective in protecting the polyimide. Metal oxide coatings with a small amount of fluoropolymer codeposited have the additional benefit of great flexibility.

Banks, B. A.↗
NASA NTRS1985

Ion beam sputter-deposited thin film coatings for protection of spacecraft polymers in low earth orbit

Ion beam sputter-deposited thin films at Al2O3, SiO2, and a codeposited mixture of predominantly SiO2 with small amounts of fluoropolymer were evaluated both in laboratory plasma ashing tests and in space on board Shuttle flight STS-8 for effectiveness in preventing oxidation of polyimide Kapton. Measurements of mass loss and optical performance of coated and uncoated polyimide samples exposed to the low earth orbital environment are presented. Optical techniques were used to measure loss rates of protective films exposed to atomic oxygen. Results of the analysis of the space flight exposed samples indicate that thin film metal oxide coatings are very effective in protecting the polyimide. Metal oxide coatings with a small amount of fluoropolymer codeposited have the additional benefit of great flexibility.

Banks, B. A.↗
NASA NTRS2005

A Broad-Band Phase-Contrast Wave-Front Sensor

A broadband phase-contrast wave-front sensor has been proposed as a real-time wave-front sensor in an adaptive-optics system. The proposed sensor would offer an alternative to the Shack-Hartmann wave-front sensors now used in high-order adaptive-optics systems of some astronomical telescopes. Broadband sensing gives higher sensitivity than does narrow-band sensing, and it appears that for a given bandwidth, the sensitivity of the proposed phase-contrast sensor could exceed that of a Shack-Hartmann sensor. Relative to a Shack-Hartmann sensor, the proposed sensor may be optically and mechanically simpler. As described below, an important element of the principle of operation of a phase-contrast wave-front sensor is the imposition of a 90deg phase shift between diffracted and undiffracted parts of the same light beam. In the proposed sensor, this phase shift would be obtained by utilizing the intrinsic 90 phase shift between the transmitted and reflected beams in an ideal (thin, symmetric) beam splitter. This phase shift can be characterized as achromatic or broadband because it is 90deg at every wavelength over a broad wavelength range.

Bloemhof, Eric↗
NASA NTRS1989

Electron beam flash evaporation for YBaCuO and BiCaSrCuO thin films

An electron beam flash evaporation technique is described which reproduces the stoichiometry of superconducting YBa(2)Cu(3)O(x) (123), Bi(2)CaSr(2)Cu(2)O(y) (2122), and Bi(2)Ca(2)Sr(2)Cu(3)O(z) (2223) source powders. Films of each material deposited with this technique exhibit zero resistance temperatures of 78 K or above when furnace annealed; 75 K zero temperatures are obtained for 123 films in situ annealed with atomic oxygen at 775 C. Transport critical current densities are 10,000 A/sq cm in 25-micron stripes patterned from 123 films, and 60,000 A/sq cm in 1-mm stripes of 2122 and 2223 films using a 1-microV/mm measurement criteria. Typical normal state resistivities are 700 micro-ohm cm for 2122 and 2223 films and 5 micro-ohm cm for 123 films. The 2122 films are highly textured with the c axis normal to the substrate. All results are for films deposited on MgO.

Davis, Matthew F.↗
NASA NTRS2005

Growth of periodic nano-layers of nano-crystals of Au, Ag, Cu by ion beam

Multilayered thin films of SiO2/AU+ SiO2/, SiO2/Ag+ SiO2/, and SiO2/Cu+ SiO2/, were grown by deposition. We have previously shown that MeV ion Bombardment of multi-nano-layers of SiO2/AU+ SiO2/ produces Au nanocrystals in the AU+ SiO2 layers. An increased number of nano-layers followed by MeV ion bombardment produces a wide optical absorption band, of which its FWHM depends on the number of nano-layers of SiO2/AU+ SiO2/. We have successfully repeated this process for nano-layers of SiO2/Ag+ SiO2/, and SiO2/Cu+ SiO2/. In this work we used 5 MeV Si as the post deposition bombardment ion and monitored the location as well as the optical absorption's FWHM for each layered structure using Optical Absorption Photospectrometry. The concentration and location of the metal nano-crystals were measured by Rutherford Backscattering Spectrometry. We will report on the results obtained for nano-layered structures produced by post deposition bombardment of SiO2/AU+ SiO2/, SiO2/Ag+ SiO2/, and SiO2/Cu+ SiO2/ layered systems as well as the results obtained from a system containing a periodic combination of SiO2/AU+ SiO2/, SiO2/Ag+ SiO2/, and SiO2/Cu+ SiO2/.

Smith, Cydale C.↗
NASA NTRS1993

Transverse vibrations of shear-deformable beams using a general higher order theory

A general higher order theory is developed to study the static and vibrational behavior of beam structures having an arbitrary cross section that utilizes both out-of-plane shear-dependent warping and in-plane (anticlastic) deformations. The equations of motion are derived via Hamilton's principle, where the full 3D constitutive relations are used. A simplified version of the general higher-order theory is also presented for beams having an arbitrary cross section that includes out-of-plane shear deformation but assumes that stresses within the cross section and in-plane deformations are negligible. This simplified model, which is accurate for long to moderately short wavelengths, offers substantial improvements over existing higher order theories that are limited to beams with thin rectangular cross sections. The current approach will be very useful in the study of thin-wall closed-cell beams such as airfoil-type sections where the magnitude of shear-related cross-sectional warping is significant.

Kosmatka, J. B.↗
NASA NTRS1992

Theory of anisotropic thin-walled closed-section beams with hygrothermal effects

A variationally consistent theory is developed in order to derive the governing equations of anisotropic thin-walled beams with closed sections subjected to axial load, torsion, bending and hygrothermal loads. The theory is based on an asymptotical analysis of two-dimensional shell theory. Closed-form expressions for the beam stiffness coefficients, equivalent hygrothermal loads, stress and displacement fields are provided. The influence of material anisotropy and hygrothermal coefficients on the displacement field is identified. The analysis is applied to predict the response of composite beams under thermomechanical loading.

Badir, Ashraf M.↗