Search NASA⌕ Search

SEARCH · Search NASA

Results for “BLEACHING”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Melt compounding of spray-dried cellulose nanofibrils/polypropylene and their application in 3D printing

Abstract Micro- and nano-scale cellulosic fillers exhibit excellent dispersion and distribution within a thermoplastic matrix during the process of melt compounding or injection molding. In this study, spray-dried cellulose nanofiber (SDCNF) powders were manufactured using a pilot-scale rotating disk atomizer spray dryer. Bleached Kraft pulp (BKP), unbleached Kraft pulp (UKP), and old corrugated cardboard pulp (OCC) fibrillated at a fines level of 90% were used as feedstock materials for spray-drying. BKP-, UKP-, and OCC- SDCNFs were compounded with polypropylene using a twin screw co-rotating extruder. Maleic anhydride grafted polypropylene (MAPP) was used as a coupling agent in the composite formulations. The tensile, flexural, and impact properties of SDCNF-filled PP composites increased at 10 wt% SDCNF loading. The presence of SDCNFs in the PP matrix resulted in faster crystallization and a 12% reduction in the degree of crystallinity of the neat PP. The coefficient of thermal expansion (CTE) of neat PP was reduced by up to 31% attributable to the presence of the SDCNFs. Application of the SDCNF-reinforced PP composites in 3D printing reduced the shrinkage rate of the printed neat PP by 39%, and the printability of the PP was significantly improved with the addition of the SDCNFs.

Materials Science↗
DOE OSTI2019

N-Silylated Benzothiazolium Dye as a Coupling Agent for Polylactic Acid/Date Palm Fiber Bio-composites

This work proposes a benzothiazole derivative bearing a silane moiety as a new coupling agent for polylactic acid (PLA) reinforced by date palm fibers (DPFs). The bio-composites are prepared by solution blending followed by melt compounding. From the samples produced, a complete characterization is performed including morphological, mechanical and thermal properties as a function of fiber content. The results show that the proposed fiber treatment is an easy and effective method to improve the interfacial properties and fiber dispersion leading to better material performance. For example, the addition of only 1 wt% of the dye–IPTMS to the bleached DPF not only improved the thermal stability of the biocomposites, but also led to a significant increase of the Young’s modulus at 7 wt% and higher torsion modulus up to 5 wt% (optimum value).

36 MATERIALS SCIENCE↗
DOE OSTI2025

Nanoscale Examination of Chemical and Enzymatic Degradation of Plant Cell Walls

Lignocellulosic materials present the largest source of biomass for biotechnology and green energy. This study aimed at better understanding the cell wall disintegration mechanisms relevant for the biochemical conversion of biomass to carbohydrates. Herein, we examined nanoscale changes in cell wall structure and composition upon industrially relevant chemical and enzymatic treatments to achieve the desired level of breakdown. One treatment involved hydrogen peroxide and acetic acid to remove lignin. Another modification used the cellulase enzyme for cell wall degradation. Band excitation contact resonance atomic force microscopy was used to visualize and mechanically characterize cell wall layers. After cellulase treatments, we detected microcracks across the cell wall. Wet-chemical, Fourier-transform infrared and Raman spectroscopic analyses confirmed the removal of lignin and extractives through acid bleaching, while the enzymatic treatment minimally affected the biopolymer composition. Delignification resulted in cell wall delamination and reduced stiffness. In conclusion, X-ray diffraction revealed changes in cellulose structure and crystallinity.

Soini, Steven A. [Florida Atlantic Univ., Boca Rat↗
DOE OSTI2021

Surface-Induced Deprotonation of Thiol Ligands Impacts the Optical Response of CdS Quantum Dots

Cadmium chalcogenide quantum dots (QDs) passivated by thiol-based ligands exhibit several advantages in their applications in lighting, sensing, and imaging technologies. However, their emission is sensitive to thiol concentrations, pH conditions, and temperatures. Using calculations based on the density functional theory, we identify conditions for thiol/thiolate equilibrium at the CdS QD surface that either eliminate or introduce optically inactive hole trap states favoring or disfavoring the emission. Our calculations indicate much weaker interactions between the QD and protonated species (thiols), compared to their deprotonated counterparts (thiolates). Additionally, the surface of CdS QD facilitates the partial deprotonation of thiols, leading to the formation of an additional stable networking conformation where the proton is shared between the ligand and the QD surface. Thiolates strongly reduce the optical intensity of low-energy transitions in CdS QDs, contributing thiolate-localized hole trap states at the QD band gap. However, networking between the thiols and the surface, as well as the presence of native ligands such as primary amines, stabilize such trap states brightening the lowest optical transitions. This explains the increased emission of thiol-passivated QDs at lower concentrations in neutral or acidic solutions. Surface-mediated bias toward deprotonated species and their contribution to optically inactive states also rationalizes irreversible emission quenching and bleaching in the CdSe/CdS QDs exposed to high temperatures or intensive laser pulse.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Preparation and Characterization of Various Kraft Lignins and Impact on Their Pyrolysis Behaviors

Lignin-derived chemicals and fuel products have received much attention in the context of bio-refinery. In this study we prepared and characterized various lignin samples from black liquor (BL), a major byproduct from the pulp and paper manufacturing processes, and studied the pyrolysis behaviors of these isolated lignin samples at 600 °C under a N2 atmosphere. Three lignin samples were isolated from the Kraft pulping BL of Loblolly pine linerboard grade process (KL, obtained by direct evaporation; L10, obtained by precipitation at pH 10; L3, obtained by precipitation at pH 3), while another three were from the Kraft pulping BL of Loblolly pine bleach grade process (KB, B10, B3). The inorganic elements present in lignin samples were analyzed using an inductively coupled plasma (ICP) analyzer. The KL and KB samples contained a larger amount of inorganic elements, especially Na and S, than did the other lignin samples. Owing to large quantities of inorganic elements, the ash contents in KL and KB were higher than in the precipitated lignin samples (L10, B10, L3, and B3). These inorganic elements have a significant effect on the subsequent pyrolysis process, as a result, more extensive depolymerization of lignin occurred in KL and KB samples, leading to the formation of fewer pyrolysis oils, with lower molecular weights. NMR analyses of pyrolysis oils show that more methoxyl groups and ether bonds were cleaved, resulting in fewer methoxyl groups and aromatic C–O bonds for the KL and KB heavy oil than for the precipitated lignin heavy oil.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Developing and Demonstrating a Lab Method for Quantifying Hair Exposure to Environmental Tobacco Smoke with a Forensic Perspective

Forensic science and chemistry curricula often lack hands-on experimental designs that effectively simulate the impact of environmental tobacco smoke (ETS) or other common elements found at crime scenes, such as marijuana, on trace forensic evidence. Hair, a critical form of trace evidence, offers unique advantages for assessing long-term exposure to environmental pollutants, including ETS. This study presents a novel, noninvasive forensic laboratory module designed to evaluate ETS exposure on various human hair types (untreated, dyed, and bleached). The experimental procedure involved controlled cigarette smoke exposure, followed by analysis using UV−visible spectroscopy, FTIR spectroscopy, and zeta potential measurements. Thirteen students participated in the three-week lab module (three sessions per week). Pre- and postlab assessments were conducted to evaluate learning outcomes. The prelab assessment focused on baseline knowledge of forensic hair analysis, as well as student expectations and confidence. The postlab assessment evaluated knowledge gained, technical insights, application of techniques, self-reflection, conceptual understanding, and practical skill development. This design helped students comprehend the effects of chemical treatments that significantly influence hair’s capacity to adsorb ETS residues by altering its physical and chemical properties. Integration of this experiment into the forensic chemistry curriculum led to measurable gains in student understanding, technical competency, and appreciation for realworld forensic applications. This method offers a valuable teaching and investigative tool for assessing individual ETS exposure in forensic contexts.

FTIR↗
DOE OSTI2023

Correction to “Ruthenium Dye Excitations and Relaxations in Natural Sunlight”

An error in computing the optical rate coefficients for dye RuP was discovered in Table S4 of the Supporting Information Section S8 Model S? for this article, published in J. Phys. Chem. A, 2021, 125, 4365-4372, 10.1021/acs.jpca.1c02386. The optical rate coefficients include absorption, stimulated emission, and ground-state bleach associated with the ground state and the singlet and triplet excited states as well as for the excited-state absorption between the excited states and implicit higher-energy excited states. The optical rate coefficients for continuous solar irradiance were computed using eq 3 of the main text in which the product of the individual signal components and the solar spectrum are integrated and multiplied by the fundamental optical rate coefficient. We determined the incorrect signal components were used for RuP in the published Supporting Information Table S4. The corrected Table S4 column for RuP is presented with the reported values from the original paper in the corrected Supporting Information. New simulations have been performed using the corrected values, and the results were used to update Figures 5 and 6 and also Figure S9 in the corrected Supporting Information. The published conclusions are unchanged. The populations of RuP excited states, Figure 5, are only marginally smaller, which should be expected with minor changes to the optical rate coefficients. There is not a significant change in the results for the number of radiative and nonradiative interactions per dye per second (the optical transitions and nonradiative transitions increased, respectively, by approximately 2% and 10%, Figure 6A). The occurrence of excited-state absorption (ESA) and excited-state emission (ESE) events, Figure 6C, both decreased from the original simulation results by 20% and 33%. The most notable difference is exhibited in Figure 6B; the fraction of population moving from the lowest-energy singlet state (i.e., intersystem crossing or ultrafast nonradiative relaxation) and nonradiative relaxation from the triplet state have decreased from ~0.45 to ~0.4 and increased from ~0.35 to ~0.4, respectively..

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Excited-State Dynamics during Primary C–I Homolysis in Acetyl Iodide Revealed by Ultrafast Core-Level Spectroscopy

In typical carbonyl-containing molecules, bond dissociation events follow initial excitation to $nπ_{C=O}$$^*$ states. However, in acetyl iodide, the iodine atom gives rise to electronic states with mixed $nπ_{C=O}$$^*$ and $nπ_{C–I}$$^*$ character, leading to complex excited-state dynamics, ultimately resulting in dissociation. Using ultrafast extreme ultraviolet (XUV) transient absorption spectroscopy and quantum chemical calculations, we present an investigation of the primary photodissociation dynamics of acetyl iodide via time-resolved spectroscopy of core-to-valence transitions of the I atom after 266 nm excitation. The probed I 4d-to-valence transitions show features that evolve on sub-100-fs time scales, reporting on excited-state wavepacket evolution during dissociation. These features subsequently evolve to yield spectral signatures corresponding to free iodine atoms in their spin–orbit ground and excited states with a branching ratio of 1.1:1 following dissociation of the C–I bond. Calculations of the valence excitation spectrum via equation-of-motion coupled cluster with single and double substitutions (EOM-CCSD) show that initial excited states are of spin-mixed character. From the initially pumped spin-mixed state, we use a combination of time-dependent density functional theory (TDDFT)-driven nonadiabatic ab initio molecular dynamics and EOM-CCSD calculations of the N$_{4,5}$ edge to reveal a sharp inflection point in the transient XUV signal that corresponds to rapid C–I homolysis. Here, by examining the molecular orbitals involved in the core-level excitations at and around this inflection point, we are able to piece together a detailed picture of C–I bond photolysis in which d → σ* transitions give way to d → p excitations as the bond dissociates. We also report theoretical predictions of short-lived, weak 4d → 5d transitions in acetyl iodide, validated by weak bleaching in the experimental transient XUV spectra. This joint experimental–theoretical effort has thus unraveled the detailed electronic structure and dynamics of a strongly spin–orbit coupled system.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Auger Dynamics in InP/ZnSe/ZnS Quantum Dots Having Pure and Doped Shells

In this study, we report the negative trion and biexciton Auger dynamics in very high-quality InP/ZnSe/ZnS quantum dots (QDs) having varying amounts of indium-based traps in the ZnSe shell. Negative trion times are determined by time-correlated photon-counting measurements on QDs that have been photoreduced with lithium triethylborohydride. We find that the Auger times vary from 280 to 425 ps and scale linearly with the total particle volume. Excess indium in the ZnSe shell gives rise to hole traps that are transiently populated following photoexcitation. Comparing stoichiometric and nonstoichiometric particles, we find that the negative trion lifetimes are independent of the presence of indium in the ZnSe shell. Biexciton dynamics are determined from transient absorption (TA) bleach recovery measurements. Absorption of two photons results in the formation of two types of biexcitons: those having both holes in the InP core (XX state) and those having one hole trapped in the ZnSe shell (XT state). XX state Auger times are measured in stoichiometric QDs, and for these particles, the Auger times are ~80 ps. Nonstoichiometric QDs show an additional long TA decay component, assigned to Auger recombination of the XT state. Here, a previous study (J. Phys. Chem. C 2021, 125, 4110–4118) found that hole trapping at indium-based shell traps results in a slow photoluminescence (PL) rise component. We find that the fraction of the XT state formed by the absorption of two photons correlates with the product of the fraction of slow PL rise and the rise time constant following one-photon excitation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Plasmon-Induced Hot-Carrier Excited-State Dynamics in Plasmonic Semiconductor Nanocrystals

The variance of carrier relaxation pathways for WO 3–x plasmonic semiconductor nanocrystals (PSNCs) is monitored by transient absorption spectroscopy following excitation of the localized surface plasmon resonance (LSPR) versus the optical band gap (E g,opt ). Excitation of the LSPR leads to efficient hot carrier population above the Fermi level in WO 3–x via Landau damping, in analogy to noble metal LSPR relaxation mechanisms. Hot carrier depopulation occurs on the femtosecond timescale, observed as the concomitant recovery of an LSPR bleach with the appearance of discrete interband and intraband photoinduced absorption features. Further, by comparison, the direct excitation of E g,opt results in trion recombination at donor–acceptor sites within the WO 3–x NC, consistent with exciton decay dynamics observed for typical wide-band-gap semiconductor NCs. From the analysis of pump power dependency data, a hot-carrier electron–phonon coupling constant of 1.47 × 10 11 J K –1 s –1 cm –3 is extracted. The direct comparison of the decay dynamics following E g,opt versus LSPR excitation confirms that the observed plasmon in trioctylphosphine oxide passivated, spherical WO 3–x is a resonance state in which hot carriers are generated only from excitation on resonance with the LSPR frequency. This study on WO 3–x PSNCs provides a toolset that can be used to evaluate the role of hot carriers following LSPR excitation of n-type, plasmonic transparent conducting oxide NCs, where enhancement of photocatalysis, photovoltaic performance, and optical enhancement has been reported.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Ultrafast Exciton Dynamics of CH 3 NH 3 PbBr 3 Perovskite Nanoclusters

Exciton dynamics of perovskite nanoclusters has been investigated for the first time using femtosecond transient absorption (TA) and time-resolved photoluminescence (TRPL) spectroscopy. The TA results show two photoinduced absorption signals at 420 and 461 nm and a photoinduced bleach (PB) signal at 448 nm. The analysis of the PB recovery kinetic decay and kinetic model uncovered multiple processes contributing to electron-hole recombination. The fast component (~8 ps) is attributed to vibrational relaxation within the initial excited state, and the medium component (~60 ps) is attributed to shallow carrier trapping. The slow component is attributed to deep carrier trapping from the initial conduction band edge (~666 ps) and the shallow trap state (~40 ps). The TRPL reveals longer time dynamics, with modeled lifetimes of 6.6 and 93 ns attributed to recombination through the deep trap state and direct band edge recombination, respectively. In conclusion, the significant role of exciton trapping processes in the dynamics indicates that these highly confined nanoclusters have defect-rich surfaces.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

eCoral: How Electrolysis Could Restore Seawater Conditions Ideal for Coral Reefs

Coral reefs suffer from climate change, including long-term ocean acidification (OA) and warming and short-term bleaching, tropical storms, and pollution events, all of which are increasing in frequency and severity. It is urgent yet unclear how to intervene to save coral reefs. Reversal of the ocean pH to preindustrial levels could restore coral reefs to their preindustrial growth rates; however, strategies to reverse OA on environmentally relevant scales have not been established. Anecdotally, electrolysis seems to help coral reefs recover from acidification and short-term events, but few uncontrolled studies support such claims. Here, using two independent continuum simulation approaches (COMSOL and CrunchFlow), we show the effect of electrolysis on seawater chemistry relevant to coral reef survival and growth. We conclude that near the negative electrodes, the cathodes, seawater pH, supersaturation, and carbonate concentration all increase significantly. Electrolysis of seawater, therefore, can be used to restore preindustrial ocean conditions locally to save coral reefs, an approach termed eCoral here. We anticipate these simulation results to be the starting point for controlled experiments to test whether seawater electrolysis promotes coral reef growth and restoration, as these simulations predict.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Chemical and Physical Drivers for Improvement in Permeance and Stability of Linker-Free Graphene Oxide Membranes

Graphene oxide (GO) is a promising membrane material for chemical separations, including water treatment. However, GO has often required postsynthesis chemical modifications, such as linkers or intercalants, to improve either the permeability, performance, or mechanical integrity of GO membranes. In this work, we explore two different feedstocks of GO to investigate chemical and physical differences, where we observe up to a 100× discrepancy in the permeability–mass loading trade-off while maintaining nanofiltration capacity. GO membranes also show structural stability and chemical resilience to harsh pH conditions and bleach treatment. Here we probe GO and the resulting assembled membranes through a variety of characterization approaches, including a novel scanning-transmission-electron-microscopy-based visualization approach, to connect differences in sheet stacking and oxide functional groups to significant improvements in permeability and chemical stability.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Electrochromic Properties of Perovskite NdNiO 3 Thin Films for Smart Windows

Semiconductors with electrically tunable band gaps are of great interest in controlling transparency to electromagnetic radiation. Thin films of perovskite nickelate NdNiO 3 (NNO), a class of correlated oxides, were deposited on single-crystal (LaAlO 3 (LAO)) and polycrystalline (fluorine-doped tin oxide-coated glass (FTO)) substrates by magnetron sputtering, chemical solution deposition (CSD), and atomic layer deposition (ALD). Their electrochromic behaviors were investigated using a three-electrode setup in basic (KOH solution, pH = 12) electrolyte. During bleaching/coloration process, the proton intercalation/deintercalation and simultaneous electron compensation in the NNO lattice under electrical bias led to crossover of the material between the pristine-conducting phase (Ni 3+ ) and the strongly correlated insulating phase (Ni 2+ ), which serves as the working principle for electrochromic (tunable opacity in the visible range) behavior. Cyclic voltammetry (CV) scans demonstrate that NNO films are electrochemically stable in basic solutions for all three film deposition methods explored here. CV scans at varying rates enabled the extraction of diffusion coefficient of protons in thin film NNO, which is similar to 10 –7 cm 2 s –1 among all films studied. Large light transmittance modulation by bleaching and coloration was observed on films grown on both LAO and FTO substrates, suggesting its potential as an electrochromic material candidate for smart windows and optical shutter applications. Here, porous NNO films obtained by chemical solution deposition tend to demonstrate stronger electrochromic activity than dense films grown by sputtering or ALD.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Excited Carrier Dynamics in a Dye-Sensitized Niobate Nanosheet Photocatalyst for Visible-Light Hydrogen Evolution

Dye-sensitized photocatalysts that consist of a light-absorbing dye and a wide gap oxide semiconductor have been studied extensively as components of solar energy conversion systems. Although surface modification by a metal and/or metal oxide has a significant impact on the photocatalytic efficiency, the mechanism by which these modifications increase the activity has not been fully understood. Here a dye-sensitized H 2 evolution system was constructed by using Pt-intercalated HCa 2 Nb 3 O 10 nanosheets, Ru(II) complex photosensitizers ([Ru(4,4’-(CH 3 ) 2- bpy) 2 (4,4’-(PO 3 H 2 ) 2- bpy)] 2+ and [Ru(4,4’-(CH 3 ) 2- bpy) 2 (4,4’-(CH 2 PO 3 H 2 ) 2- bpy)] 2+ , abbreviated as RuP 2+ and RuCP 2+ ; bpy = 2,2'-bipyridine), and amorphous Al 2 O 3 as building blocks. In the presence of iodide as the electron donor, the H 2 evolution rate from Pt/HCa 2 Nb 3 O 10 nanosheets sensitized by RuP 2+ was increased by modification of the nanosheets with Al 2 O 3 . On the other hand, Al 2 O 3 had a negative impact on the H 2 evolution rate when RuCP 2+ was employed. These hybrid materials were studied by transient diffuse reflectance spectroscopy and steady-state emission spectroscopy. A detailed analysis of the transient absorption profiles of the adsorbed Ru(II) complexes revealed that there are at least three states of the complexes on the nanosheet surface. The transient bleaching of the ground state absorbance had different lifetime components ranging from a few μs to several hundred μs, which mainly reflect back electron transfer rates from HCa 2 Nb 3 O 10 to the oxidized Ru(II) complexes. Here, the Al 2 O 3 modifier could inhibit not only the back electron transfer events but also electron injection from the excited state photosensitizer. Interestingly, the negative effect of Al 2 O 3 on the electron injection rate was negligible in the case of RuP 2+ , which also had a higher H 2 evolution rate. This work highlights that suppressing fast back electron transfer from Pt/HCa 2 Nb 3 O 10 to the oxidized Ru(II) complex, which occurs on a time scale of a few μs, and maximizing the electron injection efficiency are both necessary for improving dye-sensitized H 2 evolution.

14 SOLAR ENERGY↗
DOE OSTI2020

Can N95 Respirators Be Reused after Disinfection? How Many Times?

The coronavirus disease 2019 (COVID-19) pandemic has led to a major shortage of N95 respirators, which are essential for protecting healthcare professionals and the general public who may come into contact with the virus. Thus, it is essential to determine how we can reuse respirators and other personal protective equipment in these urgent times. We investigated multiple commonly used disinfection schemes on media with particle filtration efficiency of 95%. Heating was recently found to inactivate the virus in solution within 5 min at 70 °C and is among the most scalable, user-friendly methods for viral disinfection. We found that heat (≤85 °C) under various humidities (≤100% relative humidity, RH) was the most promising, nondestructive method for the preservation of filtration properties in meltblown fabrics as well as N95-grade respirators. At 85 °C, 30% RH, we were able to perform 50 cycles of heat treatment without significant changes in the filtration efficiency. At low humidity or dry conditions, temperatures up to 100 °C were not found to alter the filtration efficiency significantly within 20 cycles of treatment. Ultraviolet (UV) irradiation was a secondary choice, which was able to withstand 10 cycles of treatment and showed small degradation by 20 cycles. However, UV can potentially impact the material strength and subsequent sealing of respirators. Finally, treatments involving liquids and vapors require caution, as steam, alcohol, and household bleach all may lead to degradation of the filtration efficiency, leaving the user vulnerable to the viral aerosols.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2026

Nanocrystal-to-Ligand Interfacial Thermal Transport: Plasmonic Indium Tin Oxide to Perylene Diimide Adsorbates

The generation and dissipation of heat in nanocrystals upon optical excitation is a process which may either limit or enhance their performance in certain applications. Using transient absorption spectroscopy, we tracked the flow of heat from plasmonic tin-doped indium oxide (ITO) nanocrystals to surface adsorbed perylenediimide (PDI) molecules upon excitation of the ITO near-infrared plasmon resonance. Here, we rationalize the derivative line shapes observed in the transient absorption bleach features are the result of thermal transfer from the ITO core to surface ligands based on temperature-dependent static absorption studies of the PDI molecules adsorbed on plasmonic ITO. Through a series of pump power dependent measurements, we demonstrate that the PDI heating time is largely fluence independent at the powers measured, while the overall recovery time increases. Elucidating thermal transfer rates at the nanocrystal and organic ligand interface is key for applications such as plasmon mediated photocatalysis, where heating may obfuscate hot carrier transfer processes.

heat dissipation↗
DOE OSTI2021

Photostability of Ambient-Processed, Conjugated Polymer Electrochromic Devices Encapsulated by Bioderived Barrier Films

Polymer-based electrochromic devices (ECDs) are a promising technology for enabling low-voltage, disposable displays, yet are currently limited by photo-oxidative bleaching of the active materials. Here, renewable barrier films composed of cellulose and chitin are presented as an alternative to poly(ethylene terephthalate) (PET) for encapsulating ECDs. To assess barrier film effectiveness, lateral ECDs composed of poly(3,4-propylenedioxythiophene-(CH 2 OEtHx) 2 ) (P(ProDOT)) active layers were constructed and encapsulated with a multilayer barrier consisting of chitin nanofibers and cellulose nanocrystals spray cast onto a cellulose acetate substrate (oxygen transmission rate (OTR) = 29 cm 3 m –2 day –1 ), a commercially available PET film (OTR = 8.5 cm 3 m –2 day –1 ), and a high-performance PET-Al 2 O 3 multilayer barrier film (OTR < 1 cm 3 m –2 day –1 ). The photodegradation of the P(ProDOT) active layer was determined by measuring the evolution of the colorimetric contrast (ΔE*) and switching speeds as a function of light exposure (100 mW cm –2 , AM 1.5 G light). Photodegradation was found to proceed at a similar rate for all encapsulated devices (roughly 10 times more slowly than unencapsulated devices), highlighting the opportunity for replacing petroleum packaging with bioderived barrier films. Analysis of the switching kinetics, the shifts in optical absorbance, and evidence of chemical degradation indicate that both photochemical breakdown of the electrolyte and cross-linking of the P(ProDOT) active material are key drivers for loss of device performance when oxygen flux to the active material is limited. Furthermore, pathways toward better understanding photodegradation are then proposed with sustainability in mind for future ECD design.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗