Search NASA⌕ Search

SEARCH · Search NASA

Results for “BWR Channel”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3

Analysis of Reverse Flow Restriction Device to Prevent Dryout Fuel Damage during BWR Instability

Boiling Water Reactors (BWRs) are subjected to instabilities due to thermal hydraulics feedback or coupled Neutronics-thermal hydraulics feedback. Feedback is affected by many reactor parameters that could destabilize the core such as distribution of pressure drop across the core, axial power shape, subcooling level at the core inlet, radial power peaking factor, reactivity coefficients, and others. There are three common modes of instability in BWRs: single channel instability, core-wide instability, and regional instability. Each instability mode could damage the fuel if the power oscillations are left without an intervention like reactor scram. However, the instability problem becomes more dangerous if the automatic reactor scram is lost, like in Anticipated Transient without Scram (ATWS) accidents. A reverse flow restriction device (RFRD) would mitigate this problem. Core simulation using TRACE/PARCS code has been used to examine the potential effect of restricting the flow in the downward direction on mitigation of the power and flow oscillations to increase the safety of BWRs. The presented results demonstrate the ability of the device on limiting flow oscillation amplitude in the one bundle where it is used, on an adjacent bundle without it and reducing the power peak when the flow is low and power is high during BWR power oscillations. This exercise demonstrates the potential of previously described hardware device on preventing clad temperature excursion to keep the fuel safe from dryout damage and provide encouraging results ahead of the planned more detailed investigation where the device is to be used in more bundles up to full core. In the future work it is planned to examine the effect of device installed in a fraction of the bundles on the flow rate in other bundles. Also, the effect on the characteristics of dryout and rewetting and the resulting temperature excursions with and without the device will be given special attention. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Thermalhydraulic calculation for boiling water reactor and its natural circulation component

Thermalhydraulic of reactor core is the thermal study on fluids within the core reactor, i.e. analysis of the thermal energy transfer process produced by fission reaction from fuel to the reactor coolant. This study include of coolant temperature and reactor power density distribution. The purposes of this analysis in the design of nuclear power plant are to calculate the coolant temperature distribution and the chimney height so natural circulation could be occurred. This study was used boiling water reactor (BWR) with cylinder type reactor core. Several reactor core properties such as linear power density, mass flow rate, coolant density and inlet temperature has been took into account to obtain distribution of coolant density, flow rate and pressure drop. The results of calculation are as follows. Thermal hydraulic calculations provide the uniform pressure drop of 1.1 bar for each channels. The optimum mass flow rate to obtain the uniform pressure drop is 217g/s. Furthermore, from the calculation it could be known that outlet temperature is 288°C which is the saturated fluid’s temperature within the system. The optimum chimney height for natural circulation within the system is 14.88 m.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Best-estimate plus uncertainty thermal-hydraulic stability analysis of BWRs using TRACG code

Over the last decade, Boiling Water Reactor (BWR) power up-rates have increased plant rated power output significantly. Subsequent projects have expanded flow domains (e.g. MELLLA+) for operation at these higher power levels. This has resulted in an increase in the power to flow ratio in regions susceptible to reactor thermal-hydraulic instabilities. Since BWRs are susceptible to coupled thermal-hydraulic/nuclear oscillations when operating at these conditions, such oscillations must be prevented or reliably detected and suppressed. The Detect and Suppress Solution - Confirmation Density (DSS-CD) is the most sophisticated GEH BWR instability protection system ever employed. DSS-CD implements algorithms that monitor closely-spaced groups of Local Power Range Monitor (LPRM) detectors to detect periodic behavior typical of reactor instability events. This system is able to detect small, localized power variations in the core, distinguish between true instabilities and plant noise, and trip/scram the reactor while maintaining adequate safety margins. The combination of hardware, software, and system setpoints provides protection against violation of the Safety Limit Minimum Critical Power Ratio (SLMCPR) for anticipated oscillations. To support DSS-CD implementation, the TRACG system code is used to simulate events to confirm the capability of the DSS-CD solution for early oscillation detection and suppression. TRACG is a GEH proprietary version of the Transient Reactor Analysis Code (TRAC). TRACG includes a multi-dimensional, two-fluid model for the reactor thermal-hydraulics and a three-dimensional reactor kinetics model. The models are qualified to simulate a large variety of tests and reactor configurations, including thermal-hydraulic stability events. These features allow for detailed, best-estimate simulation of a wide range of BWR phenomena. A set of integrated TRACG event simulations for reasonably limiting anticipated events can be used to calculate the effect on the Minimum Critical Power Ratio (MCPR) performance. The purpose of the DSS-CD TRACG analysis is to confirm the inherent MCPR margin afforded by the solution design. This paper presents the Best Estimate Plus Uncertainty (BEPU) DSS-CD TRACG methodology and its application to BWR Thermal-Hydraulic (T-H) stability analyses. The statistical Code Scaling, Applicability and Uncertainty (CSAU) methodology (defined in NUREG/CR-5249) is used to calculate the MCPR uncertainty. The TRACG simulation includes a full core individual bundle model in which each fuel bundle is modeled as an individual T-H channel. The complete CSAU analysis of full core individual bundle model is an innovative solution represents the state-of-the-art stability analysis of BWRs and is the first ever full statistical analysis for stability safety analyses. The adoption of BEPU methodologies for stability analyses advances the understanding of the associated physical phenomena and maintains the safety of reactor plant operation in expanded operation domain with up-rated power. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

In-Containment Signal Conditioning and Transmission via Power Lines within High Dose Rate Areas of Nuclear Power Plants

Signal conditioning and transmission for sensor systems and networks within the containment of nuclear power plants (NPPs) still poses a challenge to engineers, particularly in the case of equipment upgrades for existing plants, temporary measurements, decommissioning of plants, but also for new builds. This paper presents an innovative method for efficient and cost-effective instrumentation within high dose rate areas inside the containment. A transmitter-receiver topology is proposed that allows simultaneous, unidirectional point-to-point transmission of multiple sensor signals by superimposing them on existing AC or DC power supply cables using power line communication (PLC) technology. Thereby the need for costly installation of additional cables and containment penetrations is eliminated. Based on commercial off-the-shelf (COTS) electronic parts, a radiation hard transmitter is designed to operate in harsh environment within the containment during full plant operation. Hardware modularity of the transmitter allows application specific tradeoffs between redundancy and channel bandwidth. At receiver side in non-radiated areas, signals are extracted from the power line, demodulated, and provided either in analog or digital output format. Laboratory qualification tests and field test results within a boiling water reactor (BWR) are validating the proof of concept of the proposed system. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Future Opportunities for LWR Irradiations in US Test Reactors

After several years of relatively low activity in the field of Light Water Reactor (LWR) fuel development, the Department of Energy again began to engage in developing new fuel technologies and irradiation performance data prompted by the Fukushima Daichi nuclear accidents. New competencies for irradiation testing in material test reactors in the United States began to be developed at this time using the Advanced Test Reactor (ATR), High Flux Isotope Reactor (HFIR), Massachusetts Institute of Technology Reactor (MITR), and the Transient Reactor Test Facility (TREAT). Capsules for testing fuel and cladding materials in ATR and HFIR were deployed, a Pressurized Water Reactor (PWR) condition loop for testing fuel rods was established in ATR, cladding corrosion studies were performed using a water loop in MITR, and TREAT pulse testing capabilities were commissioned for fuel rods in water capsules. The more recent and unexpected closure of the Halden Boiling Water Reactor (HBWR) also prompted further investments in Loss of Coolant Accident (LOCA) testing capabilities at TREAT. New configurations of these test devices show further potential in enhanced steam condition control and other investigations are building toward a flowing water loop for testing transient to dryout conditions. The closure of HBWR also prompted a major project currently underway to construct additional water loops in ATR where a novel approach is being pursued to enable Boiling Water Reactor (BWR) conditions. A meaningful collaborative project was awarded to MITR which, amidst an unexpected major overhaul of the reactor, has expanded cladding corrosion test capabilities at MITR. New explorations have led to methods for unique experiments at HFIR including channel box irradiations. New device developments are also bridging toward future potential for instrumented capsule irradiation tests in ATR and HFIR. Finally, a new project referred to as the System Physics Advanced Reactor Critical facility (SPARC) is gaining traction towards a large zero-power reactor able to produce physics validation data for LWR fuel bundle designs with increased enrichment and enhanced absorbers for 24-month operation cycles. This paper provides a brief summary of the status of these irradiation testbed capabilities with an emphasis on current efforts toward future capabilities to obtain new data and maximize the performance potential of LWR fuel technologies.

Woolstenhulme, Nicolas [Idaho National Laboratory ↗

Control blade degradation test under temperature gradient in steam atmosphere

The core of a boiling water reactor (BWR) consists of an array of fuel assemblies with cross-shaped control blades located between these assemblies. The typical control blade consists of a control blade sheath made of 316L-type S.S., a center pole made of 316L-type S.S., and control rods. In order to understand the degradation process of the control blade channel, control blade degradation tests were performed under various atmospheres with a temperature increase condition and in the presence of a temperature gradient. A test device was built. Four carbon heaters are set on both sides at the upper and the middle parts of the test device. The bottom ceramic part of the test device is cooled by water. Heating in the upper region and cooling at the bottom of the test piece give rise to the temperature gradient in the test piece. Temperatures of the test piece are measured by five W-Re type thermocouples placed close to the test piece. Steam carried by the argon gas is supplied from the bottom of the device and flows to the top inside a square carbon muffle in which the test piece is set. Three windows for visual observations are installed, with one located above the furnace and the others located at the back of the furnace. In the steam atmosphere with a steam flow rate of 0.0125 g/s/rod, the control blade, channel box, and fuel rods were degraded, especially at the upper part of the test piece. This result was similar to that observed in the argon atmosphere test. However, the observed degradation was rather different at a higher steam flow rate of 0.0417 g/s/rod. At the upper part of the test piece, only the control blade was degraded preferentially and did not react with the channel box wall. In contrast, the eutectic reaction of the stainless steel/boron carbide melt and zircaloy occurred at the lower part by coexisting with the relocated melt from the top part. These observations suggested the existence of a threshold condition for the control rod degradation between 0.0125 and 0.0417 g/s/rod which is significantly affected by the thickness of the oxide layer on zircaloy.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

TRITON11 - Westinghouse 11*11 BWR fuel design

Westinghouse has developed an 11*11 BWR fuel design referred to as the TRITON11 fuel design. Given the current economic pressure on the utilities, the key development objective was to significantly reduce the fuel cycle costs. Careful considerations were also made to meet the varying requirements between the different BWR utilities. In particular, the fuel was optimized for both short and long cycle operation, as well as for the up-rated cores and higher burnups. In addition to these advances, careful considerations were given to the overall reliability of the new design to further reduce the risk of fuel failures. Further improved fuel economy requires improved thermal margins since both SVEA-96 Optima2 and Optima3 are already highly optimized for reactivity performance at the fuel lattice level. It was realized that better thermal margins must come from adding more fuel rods, thereby reducing the linear heat generation rate and surface heat flux. This requires going beyond the 10*10 fuel lattice. An 11*11 fuel design was chosen as optimum, considering benefits versus manufacturing cost and added complexity. The numbers, dimensions and positioning of fuel rods and internal water channels (passing non-boiling water) were analyzed intensively. The resulting TRITON11 design has 109 fuel rods and 3 central water rods for improved moderation. The paper presents the TRITON11 fuel design. The development objectives are laid out and the resulting performance and reliability improvements are described. The development is in the final phase of testing and validation. Examples of recent tests are presented. The advances in BWR core analysis codes in support of TRITON11 fuel are briefly summarized. (authors)

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Severe Accident Analysis Of BWR Core Fueled With UO 2 /FeCrAl with Updated Materials and Melt Properties From Experiments

Iron-chromium-aluminum (FeCrAl) alloys are being considered as advanced fuel cladding concepts with enhanced accident tolerance. FeCrAl alloys have slower oxidation kinetics and higher strength compared to Zr-based alloys at high temperatures. FeCrAl could be used for fuel cladding and spacer or mixing vane grids in light water reactors and/or as channel box material in boiling water reactors (BWRs). There is a need to assess the potential gains afforded by the FeCrAl accident tolerant fuel concept over the existing zirconium based materials employed today.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Corium stratification test using intermediate products of degraded core materials in severe accident of BWR

Two series of corium stratification tests using samples including intermediate products (B{sub 4}C-Fe alloy, Fe-Zr alloy) in BWR severe accidents were performed to investigate the influence of initial chemical composition. Chemical features of intermediate products of degraded core materials in severe accidents are considered to change depend upon oxygen potential in the atmosphere and temperature of the products in accordance with the accident progression and the features are highly important for evaluating the relocation and stratification behavior of fuel debris, especially for boron distribution in fuel debris. The initial compositions of samples were determined based on the results of our previous control blade and channel box degradation tests. The present results indicate that the U concentration in the metallic layer largely depends on the oxygen potential in the atmosphere and the apparent red-ox reaction rate between UO{sub 2} and Zr is mitigated when the typical intermediate product B{sub 4}C-Fe alloy coexists with UO{sub 2} and Zr. (authors)

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Investigation of rotating mode behavior in BWR out-of-phase limit cycle oscillations – Part 2: TRACE/PARCS model and physical explanation

Previous neutronic/thermal-hydraulic (TH) coupled numerical simulations using full-core TRACE/PARCS and SIMULATE-3K boiling water reactor (BWR) models have shown evidence of a specific “rotating mode” behavior (steady rotation of the symmetry line, i.e. constant phase shift of approximately 90° between the first two azimuthal modes) in BWR out-of-phase limit cycle oscillations, regardless of initial conditions and even if the first two azimuthal modes have different natural frequencies. This suggests a nonlinear coupling between these modes; otherwise, the phase shift between these modes would change at a constant rate during the limit cycle. The previous paper (“Part 1”) presented a series of results to examine this rotating behavior with a reduced-order model. The goal of the present study is to provide additional analyses of the predicted rotating mode behavior using higher-fidelity numerical modeling, as well as a physical explanation for why this mode is favored over side-to-side or other oscillatory behaviors from a TH perspective. Results are presented using TRACE and TRACE/PARCS for a small number of parallel channels, which confirmed that the conclusions developed from the reduced-order model remain applicable when applying a full two-fluid, six-equation, finite-volume modeling approach. From these results, a physical explanation has been put forth to explain why the rotating symmetry line behavior is preferred from a TH standpoint, demonstrating that predominantly out-of-phase unstable systems are most unstable when the variation in the total inlet flow rate is minimized (which minimizes the effective single-phase to two-phase pressure drop ratio) and that the rotating mode is the most successful in minimizing this total flow rate variation as compared with the side-to-side case or any other oscillation pattern. The conclusion is that the rotating mode will be favored for any out-of-phase unstable system of parallel channels with no neutronic feedback or relatively weak neutronic feedback. Here, previous analyses have indicated that systems with sufficiently strong neutronic coupling may favor the side-to-side oscillation mode over the rotating mode; this topic is left as a subject of future investigation.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Criticality effect of long-term changes in material compositions and geometry in disposal canisters

For the Swedish final repository the basic requirement concerning margin to criticality is that k{sub eff} should be less than 0.95. This criterion is always fulfilled if the disposal canister is dry. If it is assumed that a canister is filled with water it is shown that the criticality criterion is fulfilled using burnup-credit for PWR fuel and credit for burnable poison for BWR fuel. If water is assumed to leak in, long term chemical processes will change the material compositions and geometries in the canister during the one million year analysis period. The main process expected to affect significantly the chemical composition of the materials in the canister is the corrosion of cast iron and carbon steel of the insert, the corrosion of the stainless steel, Inconel or Zircaloy in the fuel element structural material, the corrosion of Zircaloy cladding and finally the corrosion of spent fuel itself. During metal corrosion, various anoxic corrosion products are formed, usually with lower density than the metal itself, causing thus a volume increase in the canister, accompanied by geometrical changes. In this paper the reactivity effects of these changes are analysed and results presented. It is shown that the largest reactivity increase is due to the decrease of the water gap between the fuel and the fuel channel, due to the formation of Magnetite. Other process that possibly will increase the reactivity is if Siderite is produced besides from Magnetite, the production of Hydrogen, corrosion of the fuel and radial movements of fuel rods. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Analysis of burnup and isotopic compositions of BWR 9 x 9 UO{sub 2} fuel assemblies

In order to extend isotopic composition data focusing on fission product nuclides, measurements are progressing using facilities of JAEA for five samples taken from high burnup BWR 9 x 9 UO{sub 2} fuel assemblies. Neutronics analysis with an infinite assembly model was applied to the preliminary measurement data using a continuous-energy Monte Carlo burnup calculation code MVP-BURN with nuclear libraries based on JENDL-3.3 and JENDL-4.0. The burnups of the samples were determined to be 28.0, 39.3, 56.6, 68.1, and 64.0 GWd/t by the Nd-148 method. They were compared with those calculated using node-average irradiation histories of power and in-channel void fractions which were taken from the plant data. The comparison results showed that the deviations of the calculated burnups from the measurements were -4 to 3%. It was confirmed that adopting the nuclear data library based on JENDL-4.0 reduced the deviations of the calculated isotopic compositions from the measurements for {sup 238}Pu, {sup 144}Nd, {sup 145}Nd, {sup 146}Nd, {sup 148}Nd, {sup 134}Cs, {sup 154}Eu, {sup 152}Sm, {sup 154}Gd, and {sup 157}Gd. On the other hand, the effect of the revision in the nuclear. data library on the neutronics analysis was not significant for major U and Pu isotopes. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Development of Mechanistic Modeling Capabilities for Local Neutronically-Coupled Flow-Induced Instabilities in Advanced Water-Cooled Reactors

The major research objectives of this project included the formulation of flow and heat transfer modeling framework for the analysis of flow-induced instabilities in advanced light water nuclear reactors such as boiling water reactors. General multifield model of two-phase flow, including the necessary closure laws. Development of neurton kinetics models compatible with the proposed models of heated channel dynamics. Formulation and encoding of complete coupled neutronics/thermal-hydraulics models for the analysis of spatially-dependent local core instabilities. Computer simulations aimed at testing and validating the new models of reactor dynamics.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Analysis of Approximations in Modeling of BWR Bundle Void Distributions

In boiling water reactors, complex heterogeneous bundle designs, control blades adjacent to the corner of bundles, and the presence of boiling can lead to complex internal void distributions. A few approximations exist to model these void distributions. They could be modeled using a 1D axial solver in which each axial node is assumed to be at an average void, or each pin cell could be modeled with its own void concentration. In the latter case, the void could be discretized in pin-centered or coolant-centered channels. The goal of this project was to quantify the effect of using the different approximations for modeling internal void distributions on neutronics calculations. Using 3D void distributions calculated with CTF, Monte Carlo Neutral Particle (MCNP) transport code models were created for GE-9 and GE-14 lattices. For each model, the internal void distribution from CTF at a given axial node was selected, and a lattice calculation was carried out with MCNP. Comparisons between models using a lattice-averaged void, or using a void distribution in coolant-centered channels, showed large differences in reactivity which in some cases were well above 1,000 pcm, and it also showed differences in normalized fission rates greater than 20%. It was also found that using a lattice average void can lead to a significant difference in the estimation of the worth of a control blade. The differences found when comparing results from models using pin-centered and coolant-centered channels were up to 200 pcm in reactivity and up to 1.4% in the normalized fission rates. In addition to these two sets of comparisons, MCNP models were set up so that each subchannel had a saturated liquid component around the fuel pins and a saturated vapor component in the center to approximate annular flow. In comparison to the models using coolant-centered subchannels, up to 1–3% differences in normalized fission rates could be found.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Investigation of rotating mode behavior in BWR out-of-phase limit cycle oscillations – Part 1: Reduced order model

Previous neutronic/thermal-hydraulic (TH) coupled numerical simulations using full-core TRACE/PARCS and SIMULATE-3K BWR models have shown evidence of a specific “rotating mode” behavior (steady rotation of the symmetry line, i.e. constant phase shift of approximately 90° between the first two azimuthal modes) in out-of-phase limit cycle oscillations, regardless of initial conditions and even if the first two azimuthal modes have different natural frequencies. This suggests a nonlinear coupling between these modes; otherwise, the phase shift between these modes would change at a constant rate during the limit cycle. The goal of the present work is to gain further insights on the rotating mode behavior using a simplified mathematical model which contains all of the important physics for this application while providing sufficient flexibility and simplicity to allow for in-depth understanding of the underlying phenomena. This was accomplished using a multi-channel, multi-modal reduced-order model, using a modification of the fixed pressure drop boundary condition to simulate channel coupling via the inlet and outlet plena, in order to destabilize the out-of-phase mode over the in-phase mode. Examination of the time-dependent solution of the nonlinear system showed a clear preference for rotating mode behavior in the four-channel model under stand-alone TH conditions and for conditions with weak neutronic feedback. Furthermore, when neutronic feedback was strengthened (i.e., larger reactivity feedback coefficients), the side-to-side mode (stationary symmetry line) was favored instead. Additional analyses using higher-fidelity numerical modeling, as well as a physical explanation for the rotating behavior seen in both sets of analyses, will be provided in a companion paper (“Part 2”).

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Enhancing BWR Proliferation Resistance Fuel with Minor Actinides

To reduce spent fuel for storage and enhance the proliferation resistance for the intermediate-term, there are two major approaches (a) increase the discharged spent fuel burnup in the advanced light water reactor- LWR (Gen-III Plus), which not only can reduce the spent fuel for storage, but also increase the 238Pu isotopes ratio to enhance the proliferation resistance, and (b) use of transuranic nuclides (237Np and 241Am) in the high burnup fuel, which can drastically increase the proliferation resistance isotope ratio of 238Pu/Pu. For future advanced nuclear systems, minor actinides (MA) are viewed more as a resource to be recycled, and transmuted to less hazardous and possibly more useful forms, rather than simply disposed of as a waste stream in an expensive repository facility. As a result, MAs play a much larger part in the design of advanced systems and fuel cycles, not only as additional sources of useful energy, but also as direct contributors to the reactivity control of the systems into which they are incorporated. In the study, a typical boiling water reactor (BWR) fuel unit lattice cell model with UO2 fuel pins will be used to investigate the effectiveness of minor actinide reduction approach (MARA) for enhancing proliferation resistance and improving the fuel cycle performance in the intermediate-term goal for future nuclear energy systems. To account for the water coolant density variation from the bottom (0.76 g/cm3) to the top (0.35 g/cm3) of the core, the axial coolant channel and fuel pin were divided to 24 nodes. The MA transmutation characteristics at different elevations were compared and their impact on neutronics criticality discussed. The concept of MARA, which involves the use of transuranic nuclides (237Np and/or 241Am), significantly increases the 238Pu/Pu ratio for proliferation resistance, as well as serves as a burnable absorber to hold-down the initial excess reactivity. It is believed that MARA can play an important role in atoms for peace and the intermediate-term of nuclear energy reconnaissance.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Decay-ratio calculation in the frequency domain with the LAPUR code using 1D-kinetics

This paper deals with the problem of computing the Decay Ratio in the frequency domain codes as the LAPUR code. First, it is explained how to calculate the feedback reactivity in the frequency domain using slab-geometry i.e. 1D kinetics, also we show how to perform the coupling of the 1D kinetics with the thermal-hydraulic part of the LAPUR code in order to obtain the reactivity feedback coefficients for the different channels. In addition, we show how to obtain the reactivity variation in the complex domain by solving the eigenvalue equation in the frequency domain and we compare this result with the reactivity variation obtained in first order perturbation theory using the 1D neutron fluxes of the base case. Because LAPUR works in the linear regime, it is assumed that in general the perturbations are small. There is also a section devoted to the reactivity weighting factors used to couple the reactivity contribution from the different channels to the reactivity of the entire reactor core in point kinetics and 1D kinetics. Finally we analyze the effects of the different approaches on the DR value. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Multiscale thermal hydraulic coupling methods for boiling water reactor simulation

During the last two years, the Virtual Environment for Reactor Applications (VERA) has been extended to simulate boiling water reactors (BWRs). The thermal hydraulic effects present in BWRs are far more complex than those in pressurized water reactors (PWRs). Therefore, the runtime is significantly increase and convergence behavior worse compared to PWRs. Most of the additional runtime is spent during the first few coupled iterations, when the power shape is still rapidly evolving, dramatically affecting the thermal hydraulics (TH). To alleviate the increased computational expense, a multiscale TH coupling approach was developed in VERA in which a highly efficient, simplified TH model is solved for several coupled iterations until the power shape is partially converged. The simplified solution is used to inform the assembly-wise flow distribution in the high-fidelity TH solver CTF, reducing the amount of work required to properly balance the pressure drop in each channel and reducing runtime for the couple calculation. Because the final TH calculations are performed with CTF, there is ultimately no impact on the accuracy of the converged solution. This paper presents the details of this multiscale TH coupling approach, along with results for a 4x4 array of GE-14 fuel bundles and whole-core coupled simulations of the Hatch core. These two cases show that the multiscale approach dramatically reduces the runtime of coupled BWR simulations. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗