Search NASA⌕ Search

SEARCH · Search NASA

Results for “Back-Gate”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3

HfO{sub 2} dielectric thickness dependence of electrical properties in graphene field effect transistors with double conductance minima

We investigate the electrical properties in back-gated graphene field effect transistors (GFETs) with SiO{sub 2} dielectric and different thickness of high-k HfO{sub 2} dielectric. The results show that transform characteristic (I{sub ds}–V{sub gs}) curves of GFETs are uniquely W-shaped with two charge neutrality point (left and right) in both SiO{sub 2} and HfO{sub 2} dielectric (SiO{sub 2}-GFETs and HfO{sub 2}-GFETs). The gate voltage reduces drastically in HfO{sub 2}-GFETs compared with that in SiO{sub 2}-GFETs, and it becomes much smaller with the decline of HfO{sub 2} thickness. The left charge neutrality point in I{sub d}–V{sub g} curves of all HfO{sub 2}-GFETs is negative, compared to the positive ones in SiO{sub 2}-GFETs, which means that there exists n-doping in graphene with HfO{sub 2} as bottom dielectric. We speculate that this n-doping comes from the HfO{sub 2} layer, which brings fixed charged impurities in close proximity to graphene. The carrier mobility is also researched, demonstrating a decreasing trend of hole mobility in HfO{sub 2}-GFETs contrast to that in SiO{sub 2}-GFETs. In a series of HfO{sub 2}-GFETs with different HfO{sub 2} dielectric thickness, the hole mobility shows a tendency of rise when the thickness decreases to 7 nm. The possible reason might be due to the introduced impurities into HfO{sub 2} film from atomic layer deposition process, the concentration of which varies from the thickness of HfO{sub 2} layer.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Supercoupling effect in short-channel ultrathin fully depleted silicon-on-insulator transistors

Supercoupling effect prevents the simultaneous formation of inversion and accumulation channels at the two interfaces of ultrathin silicon-on-insulator metal-oxide-semiconductor field-effect transistor. Our work highlights that short-channel effects enhance supercoupling and turn it into a two-dimensional mechanism. The lateral influence of source and drain terminals is evidenced with experimental data and examined by 2D numerical simulations which reveal the roles of gate length and drain bias. The critical Si-film thickness, below which supercoupling arises, is significantly increased in short-channel transistors. The impact of back-gate and drain bias, BOX thickness, and quantum effects is documented and practical applications are discussed.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Ultrahigh sensitive MoTe{sub 2} phototransistors driven by carrier tunneling

Transition metal dichalcogenides (TMDs) demonstrate great potential in electronic and optoelectronic applications. However, the device performance remains limited because of the poor metal contact. Herein, we fabricate a high-performance ultrathin MoTe{sub 2} phototransistor. By introducing an electron tunneling mechanism, electron injection from electrode to channel is strikingly enhanced. The electron mobility approaches 25.2 cm{sup 2} V{sup −1} s{sup −1}, better than that of other back-gated MoTe{sub 2} FETs. Through electrical measurements at various temperatures, the electron tunneling mechanism is further confirmed. The MoTe{sub 2} phototransistor exhibits very high responsivity up to 2560 A/W which is higher than that of most other TMDs. This work may provide guidance to reduce the contact resistance at metal-semiconductor junction and pave a pathway to develop high-performance optoelectronic devices in the future.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Experimental evidence of zone-center optical phonon softening by accumulating holes in thin Ge

We discuss the impact of free carriers on the zone-center optical phonon frequency in germanium (Ge). By taking advantage of the Ge-on-insulator structure, we measured the Raman spectroscopy by applying back-gate bias. Phonon softening by accumulating holes in Ge film was clearly observed. This fact strongly suggests that the phonon softening in heavily-doped Ge is mainly attributed to the free carrier effect rather than the dopant atom counterpart. Furthermore, we propose that the free carrier effect on phonon softening is simply understandable from the viewpoint of covalent bonding modification by free carriers.

36 MATERIALS SCIENCE↗

Demonstration of large field effect in topological insulator films via a high-κ back gate

The spintronics applications long anticipated for topological insulators (TIs) has been hampered due to the presence of high density intrinsic defects in the bulk states. In this work we demonstrate the back-gating effect on TIs by integrating Bi{sub 2}Se{sub 3} films 6–10 quintuple layer (QL) thick with amorphous high-κ oxides of Al{sub 2}O{sub 3} and Y{sub 2}O{sub 3}. Large gating effect of tuning the Fermi level E{sub F} to very close to the band gap was observed, with an applied bias of an order of magnitude smaller than those of the SiO{sub 2} back gate, and the modulation of film resistance can reach as high as 1200%. The dependence of the gating effect on the TI film thickness was investigated, and ΔN{sub 2D}/ΔV{sub g} varies with TI film thickness as ∼t{sup −0.75}. To enhance the gating effect, a Y{sub 2}O{sub 3} layer thickness 4 nm was inserted into Al{sub 2}O{sub 3} gate stack to increase the total κ value to 13.2. A 1.4 times stronger gating effect is observed, and the increment of induced carrier numbers is in good agreement with additional charges accumulated in the higher κ oxides. Moreover, we have reduced the intrinsic carrier concentration in the TI film by doping Te to Bi{sub 2}Se{sub 3} to form Bi{sub 2}Te{sub x}Se{sub 1−x}. The observation of a mixed state of ambipolar field that both electrons and holes are present indicates that we have tuned the E{sub F} very close to the Dirac Point. These results have demonstrated that our capability of gating TIs with high-κ back gate to pave the way to spin devices of tunable E{sub F} for dissipationless spintronics based on well-established semiconductor technology.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Electronic properties of NH{sub 4}-adsorbed graphene nanoribbon as a promising candidate for a gas sensor

The electronic properties of NH{sub 4}-adsorbed N = 7 armchair graphene nanoribbons (AGNRs) were theoretically investigated using self-consistent atomistic simulations to explore the feasibility of AGNRs as a gas sensing material. Whereas a pristine AGNR has a finite band gap and is an intrinsic semiconductor, an NH{sub 4}-adsorbed AGNR exhibits heavily doped n-type properties similar to a graphene sheet with the molecules adsorbed. The electric characteristics of a back-gated AGNR gas sensor were also simulated and the drain current changed exponentially with increasing number of adsorbed molecules. We may conclude that an AGNR is promising as a highly sensitive gas-sensing material with large outputs.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Improving the radiation hardness of graphene field effect transistors

Ionizing radiation poses a significant challenge to the operation and reliability of conventional silicon-based devices. In this paper, we report the effects of gamma radiation on graphene field-effect transistors (GFETs), along with a method to mitigate those effects by developing a radiation-hardened version of our back-gated GFETs. We demonstrate that activated atmospheric oxygen from the gamma ray interaction with air damages the semiconductor device, and damage to the substrate contributes additional threshold voltage instability. Our radiation-hardened devices, which have protection against these two effects, exhibit minimal performance degradation, improved stability, and significantly reduced hysteresis after prolonged gamma radiation exposure. Finally, we believe this work provides an insight into graphene's interactions with ionizing radiation that could enable future graphene-based electronic devices to be used for space, military, and other radiation-sensitive applications.

36 MATERIALS SCIENCE↗

Uniform p-type doping of silicon nanowires synthesized via vapor-liquid-solid growth with silicon tetrachloride

Boron-doped silicon nanowires (SiNWs) grown by the vapor-liquid-solid growth mechanism using silicon tetrachloride (SiCl4) as the silicon precursor and trimethylboron (TMB) as the boron source were studied to understand the axial and radial doping uniformity. TMB-doped SiNWs with diameters up to 400 nm and lengths > 7.5 μm were integrated into a global back-gated test structure with multiple electrodes for electrical characterization. From gate modulated measurements, the SiNWs were confirmed to be heavily doped p-type. Multiple four point resistivity measurements across a total length of 7.5 μm were taken on as-grown SiNWs. Resistivity, corrected for surface charge, was determined to be 0.01 +/– 0.002 Ω cm along the entire length of the as-grown boron doped SiNWs. This was also observed in the axial direction for etched SiNWs, with corrected resistivity of 0.01 +/– 0.003 Ω cm, therefore confirming the uniform p-type doping of SiNWs using TMB and SiCl 4 as precursors.

42 ENGINEERING↗

Electrostatically tuned dimensional crossover in LaAlO 3 /SrTiO 3 heterostructures

We report a gate-tunable dimensional crossover in sub-micrometer-scale channels created at the LaAlO 3 /SrTiO 3 interface. Conducting channels of widths 10 nm and 200 nm are created using conducting atomic force microscope lithography. Under sufficient negative back-gate tuning, the orbital magnetoconductance of the 200 nm channel is strongly quenched, and residual signatures of low-field weak-antilocalization become strikingly similar to that of the 10 nm channel. The dimensional crossover for the 200 nm channel takes place near the conductance quantum G = 2e 2 /h. The ability to tune the dimensionality of narrow LaAlO 3 /SrTiO 3 channels has implications for interpreting transport in a variety of gate-tunable oxide-heterostructure devices.

36 MATERIALS SCIENCE↗

Quantitative measurements of nanoscale permittivity and conductivity using tuning-fork-based microwave impedance microscopy

Here, we report quantitative measurements of nanoscale permittivity and conductivity using tuning-fork (TF) based microwave impedance microscopy (MIM). The system is operated under the driving amplitude modulation mode, which ensures satisfactory feedback stability on samples with rough surfaces. The demodulated MIM signals on a series of bulk dielectrics are in good agreement with results simulated by finite-element analysis. Using the TF-MIM, we have visualized the evolution of nanoscale conductance on back-gated MoS 2 field effect transistors, and the results are consistent with the transport data. Our work suggests that quantitative analysis of mesoscopic electrical properties can be achieved by near-field microwave imaging with small distance modulation.

36 MATERIALS SCIENCE↗

Direct observation of negative differential resistance in WS2 homojunction

Vertical tunneling junctions showing negative differential resistance (NDR) are realized in WS2 homojunction devices. Mono-/multilayered single crystalline WS2 is grown using chemical vapor deposition. NDR is observed through resonant tunneling in Au/bi-layer WS2/Au and Pt/few-layered WS2/Au tunneling junctions by back-gating at room temperature. While two-dimensional materials have been a central focus of materials research during the past decade, exploiting novel properties in diverse layers of these materials is emerging with new designs for electronic devices. Our results pave the way for novel resonant tunneling devices presenting a route to fabricate homojunction WS2 with simple fabrication techniques.

Hsu, Bo (ORCID:0000000201714211)↗

Remote surface optical phonon scattering in ferroelectric Ba 0.6 Sr 0.4 TiO 3 gated graphene

We report the effect of remote surface optical (RSO) phonon scattering on carrier mobility in monolayer graphene gated by ferroelectric oxide. We fabricate monolayer graphene transistors back-gated by epitaxial (001) Ba 0.6 Sr 0.4 TiO 3 films, with field effect mobility up to 23 000 cm 2 V –1 s –1 achieved. Switching ferroelectric polarization induces nonvolatile modulation of resistance and quantum Hall effect in graphene at low temperatures. Ellipsometry spectroscopy studies reveal four pairs of optical phonon modes in Ba 0.6 Sr 0.4 TiO 3 , from which we extract RSO phonon frequencies. The temperature dependence of resistivity in graphene can be well accounted for by considering the scattering from the intrinsic longitudinal acoustic phonon and the RSO phonon, with the latter dominated by the mode at 35.8 meV. Furthermore, our study reveals the room temperature mobility limit of ferroelectric-gated graphene transistors imposed by RSO phonon scattering.

36 MATERIALS SCIENCE↗

Influence of surface adsorption on MoS 2 memtransistor switching kinetics

Sulfur-deficient polycrystalline two-dimensional (2D) molybdenum disulfide (MoS 2 ) memtransistors exhibit gate-tunable memristive switching to implement emerging memory operations and neuromorphic computing paradigms. Grain boundaries and sulfur vacancies are critical for memristive switching; however, the underlying physical mechanisms are not fully understood. Furthermore, the adsorption of water and gaseous species strongly perturbs electronic transport in monolayer MoS 2 , and little work has been done to explore the influence of surface interactions on defect-related kinetics that produces memristive switching. Here, we study the switching kinetics of back-gated MoS 2 memtransistors using current transient measurements in a controlled atmosphere chamber. Here, we observe that adsorbed water molecules lead to suppression of the electronic trap-filling processes concomitant with the resistive switching process, resulting in altered kinetics of the resistive switching. Additionally, using the transient response from “bunched” drain voltage pulse trains performed as a function of temperature, we extract the energy of the affected trap state and find that it places the trap roughly midgap [E T = E C – 0.7 (±0.4) eV]. Our results highlight the importance of controlling for surface interactions that may affect switching kinetics in 2D memtransistors, synaptic transistors, and related memory devices.

36 MATERIALS SCIENCE↗

Electronic Transport in Hydrogen-Terminated Si(001) Nanomembranes

Charge carrier transport in thin hydrogen (H)-terminated Si(001) sheets is explored via a four-probe device fabricated on silicon-on-insulator (SOI) using the bulk host Si as a back gate. The method enables electrical measurements without the need to contact the sample surface proper. Furthermore, sheet conductance measurements as a function of back-gate voltage demonstrate the presence of acceptor- and donorlike surface states. These states are distributed throughout the gap and can be removed or transformed with low-temperature annealing. The density of donorlike states is just under 10 12 cm -2 eV -1 and 3 times higher than that of the acceptorlike states. We discuss the possible origins of these states. The conductance through the surface layer is too small to measure.

2-dimensional systems↗

Ferroelectric-Domain-Patterning-Controlled Schottky Junction State in Monolayer MoS 2

Here, we exploit scanning probe controlled domain patterning in a ferroelectric top-layer to induce nonvolatile modulation of the conduction characteristic of monolayer MoS 2 between a transistor and a junction state. In the presence of a domain wall, MoS 2 exhibits rectified I-V that is well described by the thermionic emission model. The induced Schottky barrier height Φ eff Β varies from 0.38 eV to 0.57 eV and is tunabe by a SiO 2 global back-gate, while the tuning range of Φ eff Β the barrier height depends sensitively on the conduction band tail trapping states. Our work points to a new route to achieve programmable functionalities in van der Waals materials and sheds light on the critical performance limiting factors in these hybrid systems.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Fabrication and DC/AC Characterization of 3-Terminal Ferromagnet/Silicon Spintronics Devices

CMOS and SOI technology compatible structures and devices are currently intensively investigated by many research groups, since various effects observed in such structures can be relatively easy implemented in electronic devices thereby expanding their functionality. The most promising is the research and development of spintronic devices, which will allow using both electron charge and spin degrees of freedom for transmission, storage and processing of information. In this work we report the fabrication process of 3-terminal (3-T) ferromagnet/silicon devices of two types. First is the planar Fe{sub 3}Si/Si 3-T structure with 5 μm gap between closest ferromagnetic electrodes. Second is silicon nanowire back-gate transistor with Fe film source and drain synthesized on SOI substrate. Transport and magnetotransport properties of both devices are investigated.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Microscopy of Electrostatic Field Effect in Novel Quantum Materials (Final Report)

In this DOE Early Career project “Microscopy of Electrostatic Field Effect in Novel Quantum Materials”, the PI’s group explored the nanoscale electronic properties when charge carriers are electrostatically modulated in functional materials. Using a microwave impedance microscope (MIM), the team probed the spatial evolution of local conductivity in various field-effect transistors (FETs) ranging from traditional metal-oxide-semiconductor FETs, sketched oxide-interface FETs, to ferroelectric FETs and electric double-layer transistors (EDLTs). Specifically, the work has led to a deep understanding on the electrical inhomogeneity and conductive edge channels in atomically thin transition metal dichalcogenides and their heterostructures, which is of fundamental importance for their applications in electronics and photonics. The unique sub-surface imaging capability also enables the first-time report of ferroelectric field effect on Ge substrates due to the polarization switching of an epitaxial BaTiO 3 layer, as well as the visualization of sketched nanostructures in the LaAlO 3 /SrTiO 3 interface. Using a cryogenic MIM, the local channel conductance in ion-gel-gated oxide EDLTs has been successfully imaged, resolving a major challenge in the EDLT research to study electronic fluctuations in the devices. Finally, a new tuning-fork-based MIM has been developed to perform quantitative conductivity imaging on back-gated FETs. The research supported by this DOE grant is significant for understanding the nanoscale uniformity in technologically important materials towards energy applications.

2D materials↗

Conformal High-K Dielectric Coating of Suspended Single-Walled Carbon Nanotubes by Atomic Layer Deposition

As one of the highest mobility semiconductor materials, carbon nanotubes (CNTs) have been extensively studied for use in field effect transistors (FETs). To fabricate surround-gate FETs— which offer the best switching performance—deposition of conformal, weakly-interacting dielectric layers is necessary. This is challenging due to the chemically inert surface of CNTs and a lack of nucleation sites—especially for defect-free CNTs. As a result, a technique that enables integration of uniform high-k dielectrics, while preserving the CNT’s exceptional properties is required. In this work, we show a method that enables conformal atomic layer deposition (ALD) of high-k dielectrics on defect-free CNTs. By depositing a thin Ti metal film, followed by oxidation to TiO2 under ambient conditions, a nucleation layer is formed for subsequent ALD deposition of Al2O3. The technique is easy to implement and is VLSI-compatible. We show that the ALD coatings are uniform, continuous and conformal, and Raman spectroscopy reveals that the technique does not induce defects in the CNT. The resulting bilayer TiO2/Al2O3 thin-film shows an improved dielectric constant of 21.7 and an equivalent oxide thickness of 2.7 nm. The electrical properties of back-gated and top-gated devices fabricated using this method are presented.

36 MATERIALS SCIENCE↗