Mean Flow Effects on Hypersonic Boundary-Layer Stability Analysis using LASTRAC
Explore the source record for details and available documents.
Boundary Layer Stability↗
SEARCH · Search NASA
Results for “Boundary Layer Stability”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Computation of the stability of the laminar compressible boundary layer.
Stability of idealized laminar boundary flow, determining phase velocity, amplification rate and wave number of all disturbances
PHASE VELOCITY↗
Boundary layer stability calculations
In this paper numerical calculation of the spatial stability of disturbances in the parallel and nonparallel Blasius boundary layers is considered. Chebyshev polynomials are used for discretization. The problem with the boundary condition at infinity is overcome, and the resulting nonlinear matrix eigenvalue problem is attacked directly. The secondary eigenvalue problem for three-dimensional disturbances is shown to be uniformly stable, and particular solutions of this problem generated by the Orr-Sommerfeld equation are shown. A numerical solution of the nonparallel problem is considered using Chebyshev polynomials. The matrix equations are analyzed directly and the problem of uniqueness of the nonparallel correction is settled by careful application of the Fredholm alternative. Nonparallel corrections to the streamwise eigenfunction are shown.
Bridges, Thomas J.↗
STABILITY OF THE COMPRESSIBLE LAMINAR BOUNDARY LAYER
Stability of compressible laminar boundary layer
LAMINAR BOUNDARY LAYER↗
Remarks on disputed numerical results in compressible boundary-layer stability theory
Past work on the influence of Mach number on the viscous and inviscid instability of flat-plate boundary layers is reviewed, and new spatial calculations are presented. These calculations support the previous view that viscosity is only stabilizing for both two- and three-dimensional first-mode waves above M1 = 3.0, and for second-mode waves at all Mach numbers. It is concluded that the calculations of Wazzan, Taghavi, and Keltner that show viscous instability at M1 = 6.0 for first-mode 50 deg waves, and at M1 = 3.0 for two-dimensional second-mode waves, are not correct.
Mack, L. M.↗
Effect of Cooling on Boundary-Layer Stability at Mach Number 3
This paper describes the calculation of the effect of wall cooling on the instability of a two-dimensional, flat-plate supersonic boundary layer under stratospheric flight conditions at Mach 3 using both the inviscid and viscous linear stability theories.
wall↗
Boundary-layer stability analysis of Langley Research Center 8-foot LFC experimental data
An analytical study of linear-amplifying instabilities of a laminar boundary layer as found in the experimental data of the LaRC/8-foot laminar-flow control (LFC) experiment was completed and the results are presented. The LFC airfoil used for this experiment was a swept, supercritical design which removed suction air through spanwise slots. The amplification of small disturbances by linear processes on a swept surface such as this can be due to either Tollmien-Schlichting (TS) and/or crossflow (CF) mechanisms. This study consists of the examination of these two instabilities by both the commonly used incompressible (SALLY and MARIA) analysis and the more involved compressible (COSAL) analysis. A wide range of experimental test conditions with variations in Mach number, Reynolds number, and suction distributions were available for this study. Experimentally determined transition locations were found from thin-film techniques and were used to correlate the n-factors at transition for the range of test cases.
Berry, Scott↗
The effect of small streamwise velocity distortion on the boundary layer flow over a thin flat plate with application to boundary layer stability theory
Researchers show how an initially linear spanwise disturbance in the free stream velocity field is amplified by leading edge bluntness effects and ultimately leads to a small amplitude but linear spanwise motion far downstream from the edge. This spanwise motion is imposed on the boundary layer flow and ultimately causes an order-one change in its profile shape. The modified profiles are highly unstable and can support Tollmein-Schlichting wave growth well upstream of the theoretical lower branch of the neutral stability curve for a Blasius boundary layer.
Goldstein, M. E.↗
Theoretical study of nonadiabatic boundary-layer stabilization times in a cryogenic wind tunnel for typical stainless steel wing and fuselage models
The time varying effect of nonadiabatic wall conditions on boundary layer properties was studied for a two dimensional wing section and an axisymmetric fuselage. The wing and fuselage sections are representative of the wing root chord and fuselage of a typical transport model for the National Transonic Facility. The analysis was made with a solid wing and three fuselage configurations (one solid and two hollow with varying skin thicknesses) all made from AISI type 310S stainless steel. The displacement thickness and local skin friction were investigated at a station on the model in terms of the time required for these two boundary layer properties to reach an adiabatic wall condition after a 50 K step change in total temperature. The analysis was made for a free stream Mach number of 0.85, a total temperature of 117 K, and stagnation pressures of 2, 6, and 9 atm.
Johnson, C. B.↗
Numerical experiments in boundary-layer stability
Numerical solution of the three-dimensional incompressible Navier-Stokes equations is used to study the instability of a flat-plate boundary layer in a manner analogous to the vibrating-ribbon experiments. Flow-field structures are observed which are very similar to those found in the vibrating-ribbon experiment to which computational initial conditions have been matched. Streamwise periodicity is assumed in the simulation so that the evolution occurs in time, but the events which constitute the instability are so similar to the spatially occurring ones of the laboratory that it seems clear the physical processes involved are the same. A spectral and finite difference numerical algorithm is employed in the simulation.
Wray, A.↗
A study of nonadiabatic boundary-layer stabilization time in a cryogenic tunnel for typical wing and fuselage models
A theoretical study has been made of the time varying effect of nonadiabatic wall conditions on boundary layer properties for a two-dimensional wing section and an axisymmetric body of revolution typical of a fuselage. The wing section and body of revolution are representative of the root chord and fuselage of what is considered to be a typical size transport model for the National Transonic Facility. The transient analysis was made at a Mach number of 0.85, for stagnation pressures of 2, 6, and 9 atmospheres at several cryogenic values of total temperature for a solid wing and for three different fuselage skin thickness configurations. The analysis considered wing and fuselage sections made from stainless steel, beryllium copper, and aluminum. Examples are presented that may be used to determine the time required to reach an adiabatic condition after a change in total temperature.
Johnson, C. B.↗
Resonant triad in boundary-layer stability. Part 1: Fully nonlinear interaction
A first principles theory is developed to study the nonlinear spatial evolution of a near-resonance triad of instability waves in boundary layer transition. This triad consists of a plane wave at fundamental frequency and a pair of symmetrical, oblique waves at the subharmonic frequency. A low frequency, high Reynolds number asymptotic scaling leads to a distinct critical layer where nonlinearity first becomes important; the development of the triad's waves is determined by the critical layer's nonlinear, viscous dynamics. The resulting theory is fully nonlinear in that all nonlinearly generated oscillatory and nonoscillatory components are accounted for. The presence of the plane wave initially causes exponential of exponential growth of the oblique waves. However, the plane wave continues to follow the linear theory, even when the oblique waves' amplitude attains the same order of magnitude as that of the plane wave. A fully interactive stage then comes into effect when the oblique waves exceed a certain level compared to that of the plane wave. The oblique waves react back on the fundamental, slowing its growth rate. The oblique waves' saturation results from their self-interaction - a mechanism that does not require the presence of the plane wave. The oblique waves' saturation level is independent of their initial level, but decreases as the obliqueness angle increases.
Mankbadi, Reda R.↗
Effect of sound on boundary layer stability
Experiments are conducted in the Arizona State University Unsteady Wind Tunnel with a zero-pressure-gradient flat-plate model that has a 67:1 elliptical leading edge. Boundary-layer measurements are made of the streamwise fluctuating-velocity component in order to identify the amplified T-S waves that are forced by downstream-traveling sound waves. Measurements are taken with circular 3-D roughness elements placed at the Branch 1 neutral stability point for the frequency under consideration, and then with the roughness element downstream of Branch 1. These roughness elements have a principal chord dimension equal to 2 lambda(sub TS)/pi of the T-S waves under study and are 'stacked' in order to resemble a Gaussian height distribution. Measurements taken just downstream of the roughness (with leading-edge T-S waves, surface roughness T-S waves, instrumentation sting vibrations, and the Stokes wave subtracted) show the generation of 3-D T-S waves, but not in the characteristic heart-shaped disturbance field predicted by 3-D asymptotic theory. Maximum disturbance amplitudes are found on the roughness centerline. However, some near-field characteristics predicted by numerical modeling are observed.
Saric, William S.↗
Effect of sound on boundary layer stability
Experiments are conducted in the Arizona State University Unsteady Wind Tunnel with a zero-pressure-gradient flat-plate model that has a 67:1 elliptical leading edge. Boundary-layer measurements are made of the streamwise fluctuating-velocity component in order to identify the amplified T-S waves that are forced by downstream-travelling, sound waves. Measurements are taken with circular 3-D roughness elements placed at the Branch 1 neutral stability point for the frequency under consideration, and then with the roughness element downstream of Branch 1. These roughness elements have a principal chord dimension equal to 2(lambda)(sub TS)/pi, of the T-S waves under study and are 'stacked' in order to resemble a Gaussian height distribution. Measurements taken just downstream of the roughness (with leading-edge T-S waves, surface roughness T-S waves, instrumentation sting vibrations and the Stokes wave subtracted) show the generation of 3-D-T-S waves, but not in the characteristic heart-shaped disturbance field predicted by 3-D asymptotic theory. Maximum disturbance amplitudes are found on the roughness centerline. However, some near-field characteristics predicted by numerical modelling are observed.
Saric, William S.↗
Higher-order accurate Osher schemes with application to compressible boundary layer stability
Two fourth order accurate Osher schemes are presented which maintain higher order accuracy on nonuniform grids. They use either a conservative finite difference or finite volume discretization. Both methods are successfully used for direct numerical simulations of flat plate boundary layer instability at different Mach numbers. Results of growth rates of Tollmien-Schlichting waves compare well with direct simulations of incompressible flow and for compressible flow with results obtained by solving the parabolic stability equations.
Van Der Vegt, J. J. W.↗
Higher-order accurate Osher schemes with application to compressible boundary layer stability
Two fourth order accurate Osher schemes are presented which maintain higher order accuracy on nonuniform grids. They use either a conservative finite difference or finite volume discretization. Both methods are successfully used for direct numerical simulations of flat plate boundary layer instability at different Mach numbers. Results of growth rates of Tollmien-Schlichting waves compare well with direct simulations of incompressible flow and for compressible flow with results obtained by solving the parabolic stability equations.
Vandervegt, J. J. W.↗
Boundary layer stability and transition to turbulence; Proceedings of the Symposium, ASME and JSME Joint Fluids Engineering Conference, 1st, Portland, OR, June 23-27, 1991
The papers presented at the conference provide an overview of current research related to the mechanisms of the laminar-turbulent transition. The principal topics discussed include receptivity, bypass mechanisms, curvature, three-dimensionality, nonlinearities, breakdown, and control. Papers are included on linear and nonlinear receptivity to vortical free-stream disturbances; initiation of boundary-layer disturbances by nonlinear mode interactions; stability and transition to turbulence of thin liquid film flow along a rotating disk; and turbulent intermittency measurements for turbomachinery flows.
Reda, D. C.↗
The Martian atmospheric planetary boundary layer stability, fluxes, spectra, and similarity
This is the first analysis of the high frequency data from the Viking lander and spectra of wind, in the Martian atmospheric surface layer, along with the diurnal variation of the height of the mixed surface layer, are calculated for the first time for Mars. Heat and momentum fluxes, stability, and z(sub O) are estimated for early spring, from a surface temperature model and from Viking Lander 2 temperatures and winds at 44 deg N, using Monin-Obukhov similarity theory. The afternoon maximum height of the mixed layer for these seasons and conditions is estimated to lie between 3.6 and 9.2 km. Estimations of this height is of primary importance to all models of the boundary layer and Martian General Circulation Models (GCM's). Model spectra for two measuring heights and three surface roughnesses are calculated using the depth of the mixed layer, and the surface layer parameters and flow distortion by the lander is also taken into account. These experiments indicate that z(sub O), probably lies between 1.0 and 3.0 cm, and most likely is closer to 1.0 cm. The spectra are adjusted to simulate aliasing and high frequency rolloff, the latter caused both by the sensor response and the large Kolmogorov length on Mars. Since the spectral models depend on the surface parameters, including the estimated surface temperature, their agreement with the calculated spectra indicates that the surface layer estimates are self consistent. This agreement is especially noteworthy in that the inertial subrange is virtually absent in the Martian atmosphere at this height, due to the large Kolmogorov length scale. These analyses extend the range of applicability of terrestrial results and demonstrate that it is possible to estimate the effects of severe aliasing of wind measurements, to produce a models which agree well with the measured spectra. The results show that similarity theory developed for Earth applies to Mars, and that the spectral models are universal.
Tillman, James E.↗