Search NASA⌕ Search

SEARCH · Search NASA

Results for “Buoy measurement”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Open-Loop Control of Adjustable Tuned Mass Dampers for Floating Wind Turbine Platforms: Preprint

Floating offshore wind turbines have several advantages over their land-based counterparts, including access to stronger, more consistent winds and proximity to population centers. However, increased costs from the platform have been a challenge inhibiting their widespread adoption. New damping technologies with tunable target frequencies and damping ratios promise a greater degree of control over platform motions, allowing hulls to be designed smaller and reducing the overall cost of the turbines. In this work, a control strategy is proposed for these adjustable tuned mass dampers (TMDs). A frequency-domain model of the system is developed, from which response amplitude operators (RAOs) for the platform's rigid-body modes can be obtained for different natural frequencies and damping ratios of the dampers. Using these RAOs, and JONSWAP spectrums of operational and extreme sea states, the performance of the various damper settings are compared by evaluating the standard deviation of a rigid-body motion of interest (platform pitch or heave). By finding the optimal damper setting for a range of representative design load cases (DLCs), a lookup function is made to return the damper target frequency given the peak period of the sea state. To determine the current sea state, we propose a simple estimator that uses wave measurements (e.g., from a measurement buoy) to determine the peak period and significant wave height. The significant wave height is determined using the statistics of the past 100 seconds of wave elevation information and the peak period is computed using a frequency locked loop. Initial results show that we can use these estimated values to control the TMD natural frequency with an open loop controller. The controlled system is tested in a range of environmental conditions determined by the International Electrotechnical Commission design load cases (DLCs), which include normal and extreme wind and wave models. In these tests, we compare the performance of 4 cases: (1) no TMD, (2) a constant TMD based on the worst case DLC, (3) a controlled TMD based on known wind and wave environments, and (4) a real-time controlled TMD using estimated wind and wave environments. The effect of hull-based TMD control is also compared to changes in traditional wind turbine control via blade pitch.

control↗
DOE OSTI2021

Wave energy resource characterization employing joint distributions in frequency-direction-time domain

Joint and marginal distributions in the frequency, direction, and time domain are employed to demonstrate their value for wave energy resource characterization when full spectra are available. Insights gained through analysis of these distributions support wave energy converter concept design, operation and maintenance. Spatial trends in the wave energy resource and contributing wave energy systems along the continental shelf of the West Coast of the United States are investigated using the most recent two-dimensional wave spectra measurements at four buoys over an eleven year period (2008 to 2018). Resource hot spots and dominant resolved energy resource bands in the frequency-direction-time domain are delineated. Resource attributes, including frequency and directional spreading, and seasonal variability, are characterized using joint distributions and marginal distributions of wave power spectra. North Pacific westerly swells in the winter season, augmented by Aleutian low-pressure southwesterly swells, are the principal suppliers of the dominant resource and main drivers influencing resource attributes. In conclusion, the modification of these systems southward, especially the North Pacific westerly swells, explains the observed spatial resource trends. The dominant resource wave period shifts two seconds to higher wave periods, thirty degrees in the dominant direction band to a more northward orientation, and forward by one month.

16 TIDAL AND WAVE POWER↗
NASA NTRS2011

Analysis of Ultra High Resolution Sea Surface Temperature Level 4 Datasets

Sea surface temperature (SST) studies are often focused on improving accuracy, or understanding and quantifying uncertainties in the measurement, as SST is a leading indicator of climate change and represents the longest time series of any ocean variable observed from space. Over the past several decades SST has been studied with the use of satellite data. This allows a larger area to be studied with much more frequent measurements being taken than direct measurements collected aboard ship or buoys. The Group for High Resolution Sea Surface Temperature (GHRSST) is an international project that distributes satellite derived sea surface temperatures (SST) data from multiple platforms and sensors. The goal of the project is to distribute these SSTs for operational uses such as ocean model assimilation and decision support applications, as well as support fundamental SST research and climate studies. Examples of near real time applications include hurricane and fisheries studies and numerical weather forecasting. The JPL group has produced a new 1 km daily global Level 4 SST product, the Multiscale Ultrahigh Resolution (MUR), that blends SST data from 3 distinct NASA radiometers: the Moderate Resolution Imaging Spectroradiometer (MODIS), the Advanced Very High Resolution Radiometer (AVHRR), and the Advanced Microwave Scanning Radiometer ? Earth Observing System(AMSRE). This new product requires further validation and accuracy assessment, especially in coastal regions.We examined the accuracy of the new MUR SST product by comparing the high resolution version and a lower resolution version that has been smoothed to 19 km (but still gridded to 1 km). Both versions were compared to the same data set of in situ buoy temperature measurements with a focus on study regions of the oceans surrounding North and Central America as well as two smaller regions around the Gulf Stream and California coast. Ocean fronts exhibit high temperature gradients (Roden, 1976), and thus satellite data of SST can be used in the detection of these fronts. In this case, accuracy is less of a concern because the primary focus is on the spatial derivative of SST. We calculated the gradients for both versions of the MUR data set and did statistical comparisons focusing on the same regions.

sea surface temperature SST)↗
NASA NTRS1994

Wave-current interaction near the Gulf Stream during the surface wave dynamics experiment

This paper presents a case study on the wave-current interaction near the local curvature of a Gulf Stream meander. The wave data were obtained from in situ measurements by a pitch-roll discus buoy during the Surface Wave Dynamics Experiment (SWADE) conducted off Wallops Island, Virginia, from October 1990 to March 1991. Owing to the advection of the Gulf Stream by the semidiurnal tide, the discus buoy was alternately located outside and inside the Gulf Stream. The directional wave measurements from the buoy show the changes in wave direction, wave energy, and directional spreading when waves encountered the current in the Gulf Stream meanders. A wave refraction model, using the ray-tracing method with an estimated Gulf Stream velocity field and meandering condition, was used to simulate wave refraction patterns and to estimate wave parameters at relative locations corresponding to buoy measurements. The numerical simulation shows that a focusing zone of wave rays was formed near the boundary and behind the crest of a simulated Gulf Stream meander. The focusing of wave rays causes changes in wave direction, increases in wave energy, and decreases in wave directional spreading, which are in good agreement with the results from the buoy measurements.

Wang, David W.↗
NASA NTRS1994

Precise mean sea level measurements using the Global Positioning System

This paper describes the results of a sea level measurement test conducted off La Jolla, California, in November of 1991. The purpose of this test was to determine accurate sea level measurements using a Global Positioning System (GPS) equipped buoy. These measurements were intended to be used as the sea level component for calibration of the ERS 1 satellite altimeter. Measurements were collected on November 25 and 28 when the ERS 1 satellite overflew the calibration area. Two different types of buoys were used. A waverider design was used on November 25 and a spar design on November 28. This provided the opportunity to examine how dynamic effects of the measurement platform might affect the sea level accuracy. The two buoys were deployed at locations approximately 1.2 km apart and about 15 km west of a reference GPS receiver located on the rooftop of the Institute of Geophysics and Planetary Physics at the Scripps Institute of Oceanography. GPS solutions were computed for 45 minutes on each day and used to produce two sea level time series. An estimate of the mean sea level at both locations was computed by subtracting tide gage data collected at the Scripps Pier from the GPS-determined sea level measurements and then filtering out the high-frequency components due to waves and buoy dynamics. In both cases the GPS estimate differed from Rapp's mean altimetric surface by 0.06 m. Thus, the gradient in the GPS measurements matched the gradient in Rapp's surface. These results suggest that accurate sea level can be determined using GPS on widely differing platforms as long as care is taken to determine the height of the GPS antenna phase center above water level. Application areas include measurement of absolute sea level, of temporal variations in sea level, and of sea level gradients (dominantly the geoid). Specific applications would include ocean altimeter calibration, monitoring of sea level in remote regions, and regional experiments requiring spatial and temporal resolution higher than that available from altimeter data.

Kelecy, Thomas M.↗
NASA NTRS1981

Remote sensing of the ocean waveheight spectrum using synthetic-aperture-radar images

The paper discusses problems in the detection and measurement of ocean waves from their SAR images, in particular the measurement of the wavenumber spectrum of ocean-wave-height fluctuations. Comparisons on a limited set of pitch-roll buoy and SEASAT SAR measurements during the 1978 JASIN experiment reveal that degradation of SAR resolution caused by wave orbital motion is a crucial factor in the detection of waves by SAR images. Thus, waves with small slopes traveling perpendicular to the SAR flight path are more easily detected than waves with large slopes traveling along the flight path. Although the SAR estimates in this comparison were found to contain significant biases, they were in rough agreement with buoy measurements, provided the ocean wavelength was between about 120 and 400 m and the ocean wave direction was not approximately along the SAR flight path.

Vesecky, J. F.↗
NASA NTRS1987

Comparison of moored wind measurements from a spar and toroidal buoy in the eastern equatorial Pacific during February-March 1981

Wind measurements at 3.8 m from a surface-following toroid and at 4.0 m from a vertically stable spar were compared to estimate the influence of mooring motion. Buoys were separated by 9 km. Data were obtained at 15-min intervals for 41 days in the equatorial Pacific, where the maximum 15-min averaged wind speed was 9.0 m/s and wind speeds averaged 4.5 m/s. Toroid wind speeds were 3.5 percent greater than the spar data, and the correlation coefficient between 15-min toroid and spar data was 0.92. The frequency of the 50-percent noise level was 0.125 cph, and the correlation coefficient between 8-hour averaged toroid and spar data was 0.98. Toroid 8-hour averaged wind speeds referenced to 10-m height were 2 percent larger thancorresponding spar data.

Halpern, David↗
NASA NTRS1993

Validation of Special Sensor Microwave Imager monthly-mean wind speed from July 1987 to December 1989

Since July 1987, the Remote Sensing Systems (Santa Rosa, California) routinely computes from first principles the wind speed from Special Sensor Microwave Imager (SSM/I) measurements of the intensity of microwave radiation emitted at the ocean surface. The accuracy of monthly-mean SSM/I wind speeds is determined by comparisons with moored-buoy wind measurements, which were recorded by four different institutions at 44 sites in the Atlantic and Pacific Oceans during July 1987 to December 1989. All results for 1988 were virtually identical with 1989. The range of monthly mean moored-buoy wind speeds was 2-10 m/s. The rms difference of 697 monthly-mean matchups of the composite 1988 and 1989 data set was 1.2 m/s. The rms differences were smaller in the equatorial zone and higher in middle latitudes, in accord with the monthly standard deviation. At middle latitudes, the time series of rms differences displayed an annual cycle. In the equatorial zone, the agreement between SSM/I and in situ data was better in regions with a lesser amount of clouds, and vice versa. For SSM/I monthly standard deviations of 1-2, 2-3, and 3-4 m/s, the average absolute values of the monthly-mean difference between SSM/I and moored-buoy wind speeds were 0.6, 0.9, and 1.4 m/s, respectively.

Halpern, David↗
NASA NTRS1992

Validation of Special Sensor Microwave Imager Monthly-Mean Wind Speed From July 1987 to December 1989

Since July 1987 the Remote Sensing Systems, Santa Rosa, California, routinely computes from first principles the wind speed from Special Sensor Microwave Imager (SSM/I) measurements of the intensity of microwave radiation emitted at the ocean surface. The accuracy of monthly-mean SSM/I wind speeds is determined by comparisons with moored-buoy wind measurements, which were recorded by four different institutions at 44 sites in the Atlantic and Pacific Oceans during July 1987 to December 1989. All results for 1988 were virtually identical with 1989. The range of monthly mean moored-buoy wind speeds was 2-10 m s^(-1). During 1987, the equatorial matchups were not equivalent with 1998 and 1989, and the cause remains unknown. The root-mean-square (rms) difference of 697 monthly-mean matchups of the composite 1988 and 1989 data set was 1.2 m s^(-1). The rms differences were smaller in the equatorial zone and higher in middle latitudes, in accord with the monthly standard deviation. At middle latitudes the time series of rms differences displayed an annual cycle. In the equatorial zone the agreement between SSM/I and in situ data was better in regions with a lesser amount of clouds, and vice versa. For SSM/I monthly standard deviations of 1-2, 2-3, and 3-4 m s^(-1), the average absolute values of the monthly-mean difference between SSM/I and moored-buoy wind speeds were 0.6, 0.9, and 1.4 m s^(-1), respectively.

Halpern, D.↗
NASA NTRS2003

Simultaneous Ocean Wave Measurements by the JASON and TOPEX Satellites, With Buoy and Model Comparisons

The verification phase of the Jason-1 satellite altimeter mission presents a unique opportunity for comparing near-simultaneous, independent satellite measurements. We here examine simultaneous significant wave height measurements by the Jason-1 and Topex/Poseidon altimeters. These data are also compared with in-situ measurements from deep-ocean buoys and with predicted wave heights from the WaveWatch 111 operational model. The rms difference between Jason and Topex wave heights is 28 cm, and this can be lowered by half through improved outlier editing and filtering of high-frequency noise. Noise is slightly larger in the Jason dataset, exceeding Topex by about 7 cm rms at frequencies above 0.05 Hz, which is the frequency at which the coherence between Topex and Jason measurements drops to zero. Jason wave heights are more prone to outliers, especially during periods of moderate to high backscatter. Buoy comparisons confirm previous reports that Topex wave heights are roughly 5% smaller than buoy measurements for waves between 2 and 5m; Jason heights in general are 3% smaller than Topex. Spurious dips in the Topex density function for 3- and 6-meter waves, a problem that has existed since the beginning of the mission, can be solved by waveform retracking.

Ray, R. D.↗
NASA NTRS1983

Mechanisms for SAR imaging of ocean surface phenomena: Theory and experiment

Understanding the SAR response to surface wave is a central issue in the analysis of SAR ocean images. The imaging mechanism for gravity waves and the practical question of just which characteristics of the ocean wave field can be measured remotely using SAR were examined. Assessments of wave imaging theory are based primarily on comparisons of the directional wave height variance spectrum psi (K) measured by in situ buoys with estimates from SAR images. Other criteria are also recommended, e.g., the effects of focus adjustments. It is assumed that fluctuations in SAR image intensity are proportional to fluctuations in ocean surface height. If this were true, the Fourier power spectrum of a SAR image and corresponding surface measurements of psi would coincide. Differences between SAR estimates based on this hypothesis and buoy measurements of psi are then used to begin the assessment of rival wave imaging theories.

Vesecky, J. F.↗
DOE OSTI2024

Assessing Impacts of Waves on Hub-Height Winds off the U.S. West Coast Using Lidar Buoys and Coupled Modeling Approaches

Given the importance of offshore wind energy development to the U.S. clean energy targets, it is vital to be able to characterize the wind resource in that environment accurately. Toward that end, two Bureau of Ocean Energy Management buoys equipped with Doppler lidar are being maintained by Pacific Northwest National Laboratory on behalf of the Department of Energy and deployed to regions of potential offshore wind development. In addition to standard meteorological and oceanographic measurements, the buoys document the wind profile between about 40 m and 250 m above the sea surface through Doppler lidar retrievals. After a multiyear deployment of two buoys along the U.S. East Coast, the buoys were redeployed to the U.S. West coast from 2020 – 2022 to locations near the Humboldt and Morro Bay lease areas. The buoys provide nearly continuous, multiyear datasets that can be used to evaluate predictions of hub-height (~100 m) wind speed for standard atmospheric models in the region. In the absence of measurements at the study site, offshore wind developers rely on model-based data to assess site conditions. Potential sources of model error in this environment include under-resolution or misrepresentation of coastal topographically forced flows, marine boundary layer dynamics and the evolution of their associated cloud and turbulence fields, the role of upwelling and other currents on surface heat fluxes into the boundary layer, and the impact of wave fields on surface momentum fluxes and thus the wind speed profile. In particular, most predictive models of wind speed do not predict wave fields at all, relying on parameterizations to represent their effects. In thus study, we focus on evaluating the role of wind / wave interactions on modeled hub-height wind speed and error by using the Coupled Ocean–Atmosphere–Wave–Sediment–Transport Modeling System to capture two-way interactions between an atmospheric model (Weather Research and Forecasting (WRF)) and a wave model (WAVEWATCHIII (WW3)) and compare to both stand-alone WRF and one-way coupled WRF / WW3 configurations. Our approach is similar to that used in Gaudet et al. (2022) to evaluate wind / wave coupling over the U.S. East Coast, but applied to the very different environment of the U.S. West Coast. We show examples for two cases, a cold-season frontal case and a warm-season low-level jet case. We find that wind / wave coupling makes little impact on model error for these cases at the location of the lidar buoys, for which other misrepresentations of model physics seems to be responsible for model-observation discrepancies. However, domain-wide evaluations, which also make use of the National Buoy Data Center network, show that a two-way coupling approach is less prone to systematic errors in the hub-height wind field than the one-way coupled approach. WRF resolution of kilometer-scale or less is needed to properly capture the sharp wind speed gradients that can be found along the coastline, and WW3 simulations driven by the downscaled WRF produce better bulk and spectral wave fields when compared to observations. Implications of the results for wind resource characterization are then discussed.

17 WIND ENERGY↗
NASA NTRS1993

Evaluation of two January - June 1992 ERS-1 AMI wind vector data sets

A Jan. - Jun. 1992 10 m height wind vector field was computed with the CMOD2 model function. Freilich and Dunbar used ESA measurements of AMI (Active Microwave Instrument) sigma-naught to derive a refined model function and to produce an alternate Jan. - Jun. 1992 10 m height wind vector field, named FD data. The ESA and FD model functions and algorithms were substantially different. The FD wind vectors were in better agreement with the climatological mean wind field and with moored buoy wind measurements. The average correlation coefficients between monthly mean and daily averaged FD and moored buoy matchups of the Cartesian wind components were 0.84 and 0.74, respectively. The average root mean square differences between the monthly mean and daily averaged FD and moored buoy matchups of the Cartesian wind components were 1.25 and 3.0 m/s, respectively.

Halpern, D.↗
NASA NTRS2003

Simultaneous Ocean Wave Measurements by the Jason and Topex Satellites, With Buoy and Model Comparisons

The verification phase of the Jason-1 satellite altimeter mission presents a unique opportunity for comparing near-simultaneous, independent satellite measurements. We here examine simultaneous significant wave height measurements by the Jason-1 and Topex/Poseidon altimeters. These data are also compared with in-situ measurements from deep-ocean buoys and with predicted wave heights from the Wave Watch 111 operational model. The rms difference between Jason and Topex wave heights is 21 cm, and this can be further lowered by application of median filters to reduce high-frequency noise. This noise is slightly larger in the Jason dataset, amounting to about 7 cm rms for frequencies above 0.05 Hz, which is the frequency at which the coherence between Topex and Jason measurements drops to zero. The probability density function for Jason shows a dearth of small waves relative to Topex. Buoy comparisons confirm that this problem lies with the Jason measurements. The buoy comparisons confirm previous reports that Topex wave heights are roughly 5% smaller than buoy measurements for waves between 2 and 5m; Jason heights in general are 2.7% smaller than Topex. Spurious dips in the Topex density function for 3- and 6-meter waves, a problem that has existed since the beginning of the mission, can be solved by waveform retracking..

Ray, Richard D.↗
NASA NTRS1981

Global satellite measurements of water vapour, wind speed and wave height

The results of global measurements of atmospheric water vapor by the Seasat Scanning Multichannel Microwave Radiometer and wave height and wind speed by the Seasat altimeter (ALT) are reported. The 13.5 GHz ALT has a 3.125 ns pulsewidth and 1022 Hz repetition rate, and measures surface height to a resolution exceeding 10 cm celative to a reference ellipsoid. Full ALT data comprise 135 km equatorial groundtracks, with about a 50 cm difference of sea wave height compared to buoy reference measurements, and windspeed accuracy to within 0.25-1.58 m/sec up to 20 m/sec. Highest water vapor concentrations were observed in the tropics and the lowest at high latitudes. Wind speeds were highest for the north-east and south-east tradewinds in both the Atlantic and Pacific oceans. Average wave height is small in the summer North Hemisphere and the largest waves are in the winter Southern ocean, and lowest in western Atlantic and Pacific ocean areas where winds are lightest.

Chelton, D. B.↗
NASA NTRS2017

Using Buoy and Radar Data to Study Sudden Wind Gusts Over Coastal Regions

Significant sudden wind gusts can pose a threat to aviation near the coastline, as well as small (sailing) boats and commercial ships approaching the ports. Such cases can result in wind speed changes of more than an order of magnitude within 5 minutes, which can then last up to 20 minutes or more. Although the constellation of scatterometers is a good means of studying maritime convection, those sudden gusts are not easily captured because of the low time resolution. The National Data Buoy Center (NDBC) provides continuous measurements of wind speed and direction along the US coastal regions every 6 minutes. Buoys are platforms placed at specific places on the seas, especially along coastlines, providing data for atmospheric and oceanic studies. Next Generation Radars (NEXRADs), after the recent upgrade of the network to dual-pol systems, offer enhanced capabilities to study atmospheric phenomena. NEXRADs provide continuous full-volume scans approximately every 5 minutes and therefore are close to the time resolution of the buoy measurements. Use of single- Doppler retrievals might also provide a means of further validation.

Winds↗
DOE OSTI2024

Identifying Meteorological Drivers for Errors in Modeled Winds along the Northern California Coast

Abstract An accurate wind resource dataset is required for assessing the potential energy yield of floating offshore wind farms that are expected along the California outer continental shelf. The National Renewable Energy Laboratory has developed and disseminated an updated wind resource dataset offshore of California, using the Weather Research and Forecasting Model, referred to as the CA20 dataset. As compared to buoy lidar measurements that have become available recently, the CA20 dataset showed significant positive biases for 100-m wind speeds along Northern California wind energy lease areas. To investigate the meteorological drivers for the model errors, we first consider two 1-yr simulations run with two different planetary boundary layer (PBL) parameterizations: the Mellor–Yamada–Nakanishi–Niino (MYNN) PBL scheme (the chosen configuration in the CA20 dataset) and the Yonsei University PBL scheme (which significantly reduces the bias in modeled winds). By comparing the 1-yr simulations to the concurrent lidar buoy observations, we find that errors are larger with the MYNN PBL scheme in warm seasons. We then dive deeper into the analysis by running simulations for short-term (3-day) case studies to evaluate the sensitivity of initial/boundary condition forcings on model results. By analyzing the short-term simulations, we find that during synoptic-scale northerly flows driven by the North Pacific high and inland thermal low, a coastal warm bias in the MYNN simulation is mainly responsible for the modeled wind speed bias by altering the boundary layer thermodynamics. The results of our analysis will help guide the creation of an updated version of the CA20 dataset.

17 WIND ENERGY↗
NASA NTRS1991

Instrumentation for optical ocean remote sensing

Instruments used in ocean color remote sensing algorithm development, validation, and data acquisition which have the potential for further commercial development and marketing are discussed. The Ocean Data Acquisition System (ODAS) is an aircraft-borne radiometer system suitable for light aircraft, which has applications for rapid measurement of chlorophyll pigment concentrations along the flight line. The instrument package includes a three channel radiometer system for upwelling radiance, an infrared temperature sensor, a three-channel downwelling irradiance sensor, and Loran-C navigation. Data are stored on a PC and processed to transects or interpolated 'images' on the ground. The instrument has been in operational use for two and one half years. The accuracy of pigment concentrations from the instrument is quite good, even in complex Chesapeake Bay waters. To help meet the requirement for validation of future satellite missions, a prototype air-deployable drifting buoy for measurement of near-surface upwelled radiance in multiple channnels is undergoing test deployment. The optical drifter burst samples radiance, stores and processes the data, and uses the Argos system as a data link. Studies are underway to explore the limits to useful lifetime with respect to power and fouling.

Esaias, W. E.↗