Search NASA⌕ Search

SEARCH · Search NASA

Results for “CO2 sorption”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
NASA NTRS2005

Resistively-Heated Microlith-based Adsorber for Carbon Dioxide and Trace Contaminant Removal

An integrated sorber-based Trace Contaminant Control System (TCCS) and Carbon Dioxide Removal Assembly (CDRA) prototype was designed, fabricated and tested. It corresponds to a 7-person load. Performance over several adsorption/regeneration cycles was examined. Vacuum regenerations at effective time/temperature conditions, and estimated power requirements were experimentally verified for the combined CO2/trace contaminant removal prototype. The current paper details the design and performance of this prototype during initial testing at CO2 and trace contaminant concentrations in the existing CDRA, downstream of the drier. Additional long-term performance characterization is planned at NASA. Potential system design options permitting associated weight, volume savings and logistic benefits, especially as relevant for long-duration space flight, are reviewed. The technology consisted of a sorption bed with sorbent- coated metal meshes, trademarked and patented as Microlith by Precision Combustion, Inc. (PCI). By contrast the current CO2 removal system on the International Space Station employs pellet beds. Preliminary bench scale performance data (without direct resistive heating) for simultaneous CO2 and trace contaminant removal was reviewed in SAE 2004-01-2442. In the prototype, the meshes were directly electrically heated for rapid response and accurate temperature control. This allowed regeneration via resistive heating with the potential for shorter regeneration times, reduced power requirement, and net energy savings vs. conventional systems. A novel flow arrangement, for removing both CO2 and trace contaminants within the same bed, was demonstrated. Thus, the need for a separate trace contaminant unit was eliminated resulting in an opportunity for significant weight savings. Unlike the current disposable charcoal bed, zeolites for trace contaminant removal are amenable to periodic regeneration.

Roychoudhury, S.↗
NASA NTRS2011

Microlith-based Structured Sorbent for Carbon Dioxide, Humidity, and Trace Contaminant Control in Manned Space Habitats

To support continued manned space exploration, the development of atmosphere revitalization systems that are lightweight, compact, durable, and power efficient is a key challenge. The systems should be adaptable for use in a variety of habitats and should offer operational functionality to either expel removed constituents or capture them for closedloop recovery. As mission durations increase and exploration goals reach beyond low earth orbit, the need for regenerable adsorption processes for continuous removal of CO2 and trace contaminants from cabin air becomes critical. Precision Combustion, Inc. (PCI) and NASA Marshall (MSFC) have been developing an Engineered Structured Sorbents (ESS) approach based on PCI s patented Microlith technology to meet the requirements of future, extended human spaceflight explorations. This technology offers the inherent performance and safety attributes of zeolite and other sorbents with greater structural integrity, regenerability, and process control, thereby providing potential durability and efficiency improvements over current state-of-the-art systems. The major advantages of the ESS explored in this study are realized through the use of metal substrates to provide structural integrity (i.e., less partition of sorbents) and enhanced thermal control during the sorption process. The Microlith technology also offers a unique internal resistive heating capability that shows potential for short regeneration time and reduced power requirement compared to conventional systems. This paper presents the design, development, and performance results of the integrated adsorber modules for removing CO2, water vapor, and trace chemical contaminants. A related effort that utilizes the adsorber modules for sorption of toxic industrial chemicals is also discussed. Finally, the development of a 4-person two-leg ESS system for continuous CO2 removal is also presented.

Junaedi, Christian↗
DOE OSTI2026

Acid-base bifunctional porous liquids

Basic solutions are essential for gas-involved catalytic transformations, yet their ultralow free volume limits gas solubility and diffusivity. Engineering permanent porosity in such reactive liquids has remained a longstanding challenge. Here, we introduce a surface-sacrifice strategy that incorporates Brønsted-acidic zeolite nanocrystals into strong organic bases to create permanently porous reactive liquids. Stereochemically controlled acid–base neutralization at the external zeolite surface forms a thin ionic solvation shell that stabilizes the dispersion while fully preserving the internal microporosity and crystallinity of the zeolite framework. The resulting basic media exhibit persistent microporosity, confirmed by inert-gas sorption, 129Xe nuclear magnetic resonance, neutron scattering, and theoretical simulations. These porous liquids show significantly enhanced catalytic performance in CO2 conversion and hydrogenation reactions. The coexisting acidic and basic sites further enable antagonistic cascade catalysis within a single liquid phase. This surface-sacrifice approach provides a general route to introduce permanent porosity into reactive media, enabling boosted gas transformations.

Qiu, Liqi [University of Tennessee, Knoxville (UTK↗
DOE OSTI2026

ASU’s DAC polymer-enhanced cyanobacterial bioproductivity (AUDACity)

ASU’s DAC polymer-enhanced cyanobacterial bioproductivity (AUDACity) project aims to demonstrate a novel, scalable method for removing carbon dioxide (CO 2 ) directly from ambient air and delivering it to cyanobacterial cultures to produce commodity biofuel, mid-value protein for supplements, and high value phycocyanin (PC), a natural blue colorant (Figure A). This approach uses low-cost, reusable anion exchange polymers embedded in modular mesh packets, which capture CO 2 during drying cycles when exposed to ambient air, and release concentrated CO 2 into aqueous cultivation systems. The project addresses a critical challenge in energy research needed for developing sustainable, economically viable methods of Direct Air Capture (DAC) that can be integrated with bio-based systems for fuel and chemical production. AUDACity contributes to scientific understanding by integrating materials chemistry, cyanobacterial biology, and system engineering to create a distributed CO 2 delivery platform. Key insights have emerged around the design of biocompatible sorbents, optimization of CO 2 capture-release cycles, and durability of packet-based delivery systems under outdoor conditions. Notably, the team has synthesized and tested a range of polymer sorbents, identified mechanisms of material degradation and fouling, and advanced both lab- and pilot-scale cultivation systems to evaluate performance. From a technical and economic standpoint, AUDACity shows promise for achieving cost-effective CO 2 capture and delivery into aqueous media and biofuel production. Preliminary techno-economic analysis (TEA) indicates that the DAC system based on current performance can reach $\$$680/tonne CO 2 delivered into aqueous solution; with reasonable improvements to sorbent lifetime, sorbent capacity, reducing water uptake the approach could reach $\$$66/tonne by avoiding the need for energy-intensive sorbent regeneration and CO 2 compression, making it more feasible for decentralized deployment. With these costs for CO 2 and by extracting and selling high-value PC ($\$$50/kg) and mid-value protein supplement ($\$$6/kg), the remaining biomass can be hydrothermally treated into biofuel for $\$$2.50/gallon, and would support a small first-of-a-kind biorefinery capable of producing 500 barrels per day of biofuel. The project offers meaningful public benefits by advancing carbon removal technologies that are low-energy, modular, and adaptable to non-arable land and brackish water use. It aligns with national goals to develop advanced biotechnology and supports future pathways for bio-based fuels and products. By enabling direct coupling of CO 2 transfer into aqueous medium and biological carbon utilization, AUDACity lays the groundwork for effective algae cultivation without wasteful CO 2 delivery and is a promising and innovative solution for low-carbon fuel and bioproduct generation contributing to a vigorous bioeconomy.

09 BIOMASS FUELS↗
DOE OSTI2020

Sulfonyl PIM–1: A diverse separation membrane with dilation resistance

A sulfone modified variant (soPIM–1) of the first polymer of intrinsic microporosity has been studied through molecular simulations to analyze its applicability for adsorption–based separations of diverse nonpolar, quadrupolar, and dipolar adsorbate species. Single component gas phase adsorption isotherms of each adsorbate are provided. Here, the adsorptive properties of soPIM–1 are reported from the application of two methods: (a) traditional grand canonical Monte Carlo (GCMC) simulations and (b) a combination of Monte Carlo and molecular dynamics (GCMC/MD) techniques, which accounts for sorption–induced polymer dynamics. The calculated isosteric heats of adsorption are compared to those from the parent PIM–1 structure and reveals increased CO2 affinity with relatively no change in hydrocarbon affinity. Moreover, to quantify soPIM–1's resistance to dilation the evolution of the microporous structure across the adsorption isotherm loading pressures has been evaluated. Relatedly, nonequilibrium MD simulations have been utilized to determine that soPIM–1 is approximately twice as stiff as PIM–1.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS2012

Simulated Lunar Testing of Metabolic Heat Regenerated Temperature Swing Adsorption

Metabolic heat regenerated Temperature Swing Adsorption (MTSA) technology is being developed for thermal and carbon dioxide (CO2) control for a Portable Life Support System (PLSS), as well as water recycling. An Engineering Development Unit (EDU) of the MTSA Subassembly (MTSAS) was designed and assembled for optimized Martian operations, but also meets system requirements for lunar operations. For lunar operations the MTSA sorption cycle is driven via a vacuum swing between suit ventilation loop pressure and lunar vacuum. The focus of this effort was testing in a simulated lunar environment. This environment was simulated in Paragon's EHF vacuum chamber. The objective of the testing was to evaluate the full cycle performance of the MTSA Subassembly EDU, and to assess CO2 loading and pressure drop of the wash coated aluminum reticulated foam sorbent bed. Lunar environment testing proved out the feasibility of pure vacuum swing operation, making MTSA a technology that can be tested and used on the Moon prior to going to Mars. Testing demonstrated better than expected CO2 Nomenclature loading on the sorbent and nearly replicates the equilibrium data from the sorbent manufacturer. This exceeded any of the previous sorbent loading tests performed by Paragon. Subsequently, the increased performance of the sorbent bed design indicates future designs will require less mass and volume than the current EDU rendering MTSA as very competitive for Martian PLSS applications.

Padilla, Sebastian A.↗
NASA NTRS2011

Simulated Lunar Testing of Metabolic Heat Regenerated Temperature Swing Adsorption Technology

Metabolic heat regenerated Temperature Swing Adsorption (MTSA) technology is being developed for thermal and carbon dioxide (CO2) control for a Portable Life Support System (PLSS), as well as water recycling. An Engineering Development Unit (EDU) of the MTSA subassembly was designed and assembled for optimized Martian operations, but also meets system requirements for lunar operations. For lunar operations the MTSA sorption cycle is driven via a vacuum swing between suit ventilation loop pressure and lunar vacuum. The focus of this effort is operations and testing in a simulated lunar environment. This environment was simulated in Paragon s EHF vacuum chamber. The objective of this testing was to evaluate the full cycle performance of the MTSA Subassembly EDU, and to assess CO2 loading and pressure drop of the wash coated aluminum reticulated foam sorbent bed. The lunar testing proved out the feasibility of pure vacuum swing operation, making MTSA a technology that can be tested and used on the Moon prior to going to Mars. Testing demonstrated better than expected CO2 loading on the sorbent and nearly replicates the equilibrium data from the sorbent manufacturer. This had not been achieved in any of the previous sorbent loading tests performed by Paragon. Subsequently, the increased performance of the sorbent bed design indicates future designs will require less mass and volume than the current EDU rendering MTSA as very competitive for Martian PLSS applications.

Padilla, Sebastian A.↗
DOE OSTI2026

Moisture-driven CO 2 direct air capture and delivery for cultivating cyanobacteria

This study demonstrates a low-energy system that passively captures CO₂ from ambient air using reusable solid sorbents and delivers it directly into alkaline cultivation media to support the growth of cyanobacteria, from laboratory flasks to outdoor raceway ponds. While long-term operation revealed challenges including biofouling and sorbent degradation, the results suggest that with improved sorbent durability, this approach could provide a scalable source of atmospheric carbon for producing sustainable fuels, proteins, natural colorants, and other bioproducts.

09 BIOMASS FUELS↗
DOE OSTI2023

Dynamic structural and microstructural responses of a metal–organic framework type material to carbon dioxide under dual gas flow and supercritical conditions

The structural and microstructural responses of a model metal–organic framework material, Ni(3-methyl-4,4'-bipyridine)[Ni(CN) 4 ] (Ni-BpyMe or PICNIC-21), to CO 2 adsorption and desorption are reported for in situ small-angle X-ray scattering and X-ray diffraction measurements under different gas pressure conditions for two technologically important cases. These conditions are single or dual gas flow (CO 2 with N 2 , CH 4 or H 2 at sub-critical CO 2 partial pressures and ambient temperatures) and supercritical CO 2 (with static pressures and temperatures adjusted to explore the gas, liquid and supercritical fluid regimes on the CO 2 phase diagram). The experimental results are compared with density functional theory calculations that seek to predict where CO 2 and other gas molecules are accommodated within the sorbent structure as a function of gas pressure conditions, and hence the degree of swelling and contraction in the associated structure spacings and void spaces. Furthermore, these predictions illustrate the insights that can be gained concerning how such sorbents can be designed or modified to optimize the desired gas sorption properties relevant to enhanced gas recovery or to addressing carbon dioxide reduction through carbon mitigation, or even direct air capture of CO 2 .

36 MATERIALS SCIENCE↗
DOE OSTI2023

Rates and reversibility of CO 2 hydrogenation on Cu-based catalysts

Kinetics of reaction pathways involved in the conversion of CO 2 to methanol and CO on Cu/ZnO/Al 2 O 3 are resolved using in situ chemical titration, steady-state kinetic measurements, and mathematical formalisms for reversibility to probe salient species governing methanol selectivity and yield during CO 2 hydrogenation. Across a range of H 2 :CO 2 = 1:1 to H 2 :CO 2 = 80.5:1, active site density determined from in situ chlorine uptake remained invariant; hence, observed trends in rates can be interpreted as only arising from reaction kinetics and not from changing active site density. Kinetic and thermodynamic contributions to rates are decoupled to evaluate forward and reverse rates of methanol synthesis and reverse water-gas shift (RWGS) reactions. These kinetic analyses show that the forward rates of methanol synthesis exhibit persistent first order dependence on hydrogen pressure and are inhibited by water more significantly than the forward rates of RWGS. In contrast, the reverse rates of methanol synthesis and RWGS are both inhibited by H 2 . Consequently, without any modifications to the Cu/ZnO/Al 2 O 3 catalyst formulation, methanol selectivity can be increased to > 80% by increasing inlet H 2 partial pressure and methanol yield can be enhanced by ~20% by adding water adsorbents even under conditions far from equilibrium. Here, the kinetic treatments presented herein demonstrate a dearth of H* species during catalysis, provide thermodynamic constraints precluding sequential RWGS and CO hydrogenation as the pathway for methanol synthesis, reveal P H2 and P H2O as salient in determining methanol selectivity and yield by impacting both the forward and reverse rates of CO 2 hydrogenation on Cu/ZnO/Al 2 O 3 , and explicate the fundamentals of novel sorption-enhanced methanol synthesis, which not only alleviates equilibrium constraints but also alters the intrinsic rate at which the system approaches equilibrium.

42 ENGINEERING↗
DOE OSTI2020

Energy Performance Validation of a Gaseous Air Cleaning Technology for Commercial Buildings

The U.S. Department of Energy (DOE) Building Technologies Office Commercial Building Integration group conducts evaluations of new energy efficiency technologies as part of the High Impact Technology Catalyst program. The subject of this field validation project is an air cleaning technology that removes gaseous contaminants from indoor air to reduce outdoor air ventilation requirements. Reducing the volume of outdoor air required reduces heating, ventilating, and air conditioning (HVAC) loads and can provide significant energy savings for some buildings in certain climates. The technology, called the HLR (HVAC Load Reduction), was developed by enVerid. The technology uses a solid regenerable sorbent material that was developed by DOE's National Energy Technology Laboratory and licensed to the vendor for this application. The sorbent material was originally developed to adsorb carbon dioxide (CO2); the vendor continued to develop the sorbent and the overall system so that it can also remove volatile organic compounds (including aldehydes), carbon monoxide, ozone, and particulate matter 2.5 micrometers in diameter or smaller (PM2.5) from the air. This material has low regeneration temperature requirements, and its sorption properties are unaffected by humidity levels, both of which are beneficial for building applications.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2020

Advanced sorbents for modular oxygen production for REMS gasifiers

Under a DOE funded effort, Thermosolv LLC has been developing a sorbent-based oxygen production technology for gasification and oxy-combustion applications. The sorbents utilize oxygen-storage properties of certain perovskites to (1) selectively adsorb oxygen at moderate temperature from compressed air and (2) release the adsorbed oxygen into a vacuum or a sweep gas such as CO2 and/or steam. Through cyclic operations of multiple sorbent beds such a process can be made continuous. Pressure drop across the sorbent bed and other similar design considerations dictate that the sorbent be in the form of a high surface-area-to-volume pellet and yet still possess sufficient crush strength and integrity. Process efficiency is determined by the sorption and desorption kinetics and sorbent capacity. Typical process involves cycle times in the order of 100 seconds, a time too short to fully utilize the full volume of the sorbent and the sorption capacity of the sorbent pellets. As a part of this project, Thermosolv LLC undertook the development of oxygen sorbents as a high-surface area supported sorbent on a light-weight inert support to (1) reduce the cost, (2) increase the productivity, and (3) reduce the overall weight of the reactor. Using a previously developed perovskite (LSCF 1991) with its well-characterized performance, composite sorbent pellets each consisting of an inert core coated by a thin layer of the functional perovskite material were produced. Several low-density, inexpensive inert solids supports in the 1/8”-1/4” size were selected to keep the pressure drop across the sorbent bed in the acceptable range. A number of commercial technologies including spray coating, dip coating, incipient impregnation of porous substrate followed by thermal annealing at various temperatures and duration were employed and tested to produce robust composite supported sorbent pellets. A sense of optimum coating thickness was developed by testing sorbent pellets of various increasing diameter pellets. LSCF-1991extrudates ranging in size from 1/32” to 3/16” were tested in a TGA and in a fixed-bed pressure swing test set-up for sorption/desorption cycles of interest. The data show that for the operational conditions of interest the coating thickness for a supported sorbent pellet needs to be approximately 1/32” (about 0.8 mm). Subsequent work thereby concentrated on developing composite pellets of various substrates, shapes and sizes with coating layer of about this size range. Candidate support materials were chosen based on cost, inertness, mechanical strength, thermal expansion and chemical stability with sorbent material, and in a size range to give an acceptable pressure drop in fixed-bad reactor configurations. Coating application methods used for application of the sorbent onto the support included precipitation, spray coating and dip coating from sorbent slurries and sol gels. For all coated supports where we could successfully apply a uniform coating of desired thickness with an acceptable handling performance in terms of exfoliation, TGA-based cyclic sorption/desorption testing was performed to determine cycling capacity of oxygen. Among nearly twenty different support materials tested, best adhesion performance was obtained from stainless saddle supports. In the bench-scale fixed-bad tests stainless steel saddle support composite pellets with a coating thickness in the 0.6 mm or so range, the composite sorbent pellet performance approached up to 95% of that of the 2 mm parent material pellets. In a parallel approach to reducing the cost of the sorbent, alternate sorbent formulations replacing/reducing the amount of cobalt in the LSCF family were also investigated. Successful formulations that could match the performance of LSCF 1991 were identified based on TGA cyclic tests as LSCF 1919 and LSF 1910. In the range of operational envelop of cycle times and other relevant process operating conditions, the reduced Co formulations showed comparable performance in the bench-scale fixed-bad cyclic operations. As a part of this project, we also attempted substitution of La and Sr with Ca and Ba, and Co with Mn, Ni and Cu with little success, but the overall project goal of reducing sorbent cost in terms of raw material and manufacturing expenses was successful.

01 COAL, LIGNITE, AND PEAT↗
NASA NTRS2006

Wire-Mesh-Based Sorber for Removing Contaminants from Air

A paper discusses an experimental regenerable sorber for removing CO2 and trace components principally, volatile organic compounds, halocarbons, and NH3 from spacecraft cabin air. This regenerable sorber is a prototype of what is intended to be a lightweight alternative to activated-carbon and zeolite-pellet sorbent beds now in use. The regenerable sorber consists mainly of an assembly of commercially available meshes that have been coated with a specially-formulated washcoat containing zeolites. The zeolites act as the sorbents while the meshes support the zeolite-containing washcoat in a configuration that affords highly effective surface area for exposing the sorbents to flowing air. The meshes also define flow paths characterized by short channel lengths to prevent excessive buildup of flow boundary layers. Flow boundary layer resistance is undesired because it can impede mass and heat transfer. The total weight and volume comparison versus the atmosphere revitalization equipment used onboard the International Space Station for CO2 and trace-component removal will depend upon the design details of the final embodiment. However, the integrated mesh-based CO2 and trace-contaminant removal system is expected to provide overall weight and volume savings by eliminating most of the trace-contaminant control equipment presently used in parallel processing schemes traditionally used for spacecraft. The mesh-based sorbent media enables integrating the two processes within a compact package. For the purpose of regeneration, the sorber can be heated by passing electric currents through the metallic meshes combined with exposure to space vacuum. The minimal thermal mass of the meshes offers the potential for reduced regeneration-power requirements and cycle time required for regeneration compared to regenerable sorption processes now in use.

Perry, Jay↗
NASA NTRS1999

Experimental and Numerical Investigation of Adsorption/Desorption in Packed Sorption Beds Under Ideal and Non-Ideal Flows

The importance of the wall effect on packed beds in the adsorption and desorption of carbon dioxide, nitrogen, and water on molecular sieve 5A of 0.127 cm in radius is examined experimentally and with one-dimensional computer simulations. Experimental results are presented for a 22.5-cm long by 4.5-cm diameter cylindrical column with concentration measurements taken at various radial locations. The set of partial differential equations are solved using finite differences and Newman's method. Comparison of test data with the axial-dispersed, non-isothermal, linear driving force model suggests that a two-dimensional model (submitted to Separation Science and Technology) is required for accurate simulation of the average column breakthrough concentration. Additional comparisons of test data with the model provided information on the interactive effects of carrier gas coadsorption with CO2, as well as CO2-H2O interactions.

Mohamadinejad, H.↗
DOE OSTI2024

The carbon challenge: Design, synthesis, and chemisorption behavior of solid sorbents in direct air capture of carbon dioxide

Direct air capture (DAC) of CO 2 is a promising solution for reducing the carbon footprint through "negative emission" technology. However, the low CO 2 concentration (~400 ppm) and the dynamic nature of DAC processes present challenges in designing effective sorbent systems. Recent advancements in material design and structural engineering have led to the development of high-performance solid sorbents, offering a more stable, safe, and energy-efficient alternative to traditional liquid CO 2 capture methods. This review highlights progress in solid sorbent-based DAC, focusing on amine-modified materials, hydrogen-bonded frameworks, and ionic liquid-engineered scaffolds. The discussion covers design principles, synthesis methodologies, and their impact on CO 2 chemisorption, comparing the advantages and limitations of each approach. Characterization techniques, especially operando methods and computational tools, are reviewed to understand sorbent behavior during CO 2 integration and release. The reaction pathways and interaction mechanisms of these sorbents with CO 2 are analyzed to guide future design. Additionally, the CO 2 chemisorption behaviors, including capacity, sorption kinetics, recyclability, and durability in the presence of gaseous impurities and under humid conditions will be evaluated and compared. Further, the review offers unique insights into the physical properties, chemical structures, and surface engineering effects of these sorbents, based on comprehensive characterization and evaluation techniques.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Enhanced Carbon Capture Behavior of Carbon Fibers via Ionic Liquid Modification

Carbon-based materials are widely deployed in carbon capture but are only limited to physisorption procedures. Further extending functionalized carbon materials to CO 2 chemisorption under low CO 2 concentration is highly desirable yet challenging. In this study, a carbon fiber composed of solely ultra-micropores (~0.45 nm) was deployed as the precursor to avoid the pore blocking effect, which was modified by superbase-derived ionic liquids (ILs) containing strong interaction sites with CO 2 . By forming a thin coating layer on the surface, the as-afforded surface-functionalized fiber materials demonstrated enhanced CO 2 uptake capacity and improved CO 2 sorption kinetics, as evaluated by both the volumetric method and thermogravimetric analysis, as well as the calculated energy distribution curves. The achievements made in this work provide guidance on the functionalization of carbon-based materials towards enhanced CO 2 chemisorption by forming a thin layer of selected IL coating.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Reactivity of Shale to Supercritical CO 2 : Insights from Microstructural Characterization and Mineral Phase Evolution in Caney Shales for CCUS Applications

Understanding mineral–fluid interactions in shale under supercritical CO 2 (scCO 2 ) conditions is relevant for assessing long-term geochemical containment. This study characterizes mineralogical transformations and elemental redistribution in five Caney Shale samples serving as proxies for reservoir (R1, R2, R3) and caprock (D1, D2) facies, subjected to 30-day static exposure to pure scCO 2 at 60 °C and 17.23 MPa (2500 psi), with no brine or impurities introduced. SEM-EDS analyses were conducted before and after exposure, with mineral phases classified into silicates, carbonates, sulfides, and organic matter. Initial compositions were dominated by quartz (38–47 wt.%), illite (16–23 wt.%), carbonates (12–18 wt.%), and organic matter (8–11 wt.%). Post-exposure, carbonate loss ranged from 15 to 40% in reservoir samples and up to 20% in caprock samples. Illite and K-feldspar showed depletion of Fe 2+ , Mg 2+ , and K + at grain edges and cleavages, while pyrite underwent oxidation with Fe redistribution. Organic matter exhibited scCO 2 -induced surface alteration and apparent sorption effects, most pronounced in R2 and R3. Elemental mapping revealed Ca 2+ , Mg 2+ , Fe 2+ , and Si 4+ mobilization near reactive interfaces, though no secondary mineral precipitates formed. Reservoir samples developed localized porosity, whereas caprock samples retained more structural clay integrity. The results advance understanding of mineral reactivity and elemental fluxes in shale-based CO 2 sequestration.

geochemical CO2 sequestration↗
DOE OSTI2024

Multistage Condensation Pathway Minimizes Hysteresis in Water Harvesting with Large-Pore Metal–Organic Frameworks

Metal-organic frameworks (MOFs) have emerged as promising materials for atmospheric water harvesting (AWH). Large-pore MOFs provide high water capacity, but their significant hysteresis between sorption and desorption makes them unsuitable for AWH. Co2Cl2(BTDD) is a noteworthy exception. This MOF has large, 2.2 nm diameter one-dimensional pores, and combines both record-high water capacity and minimal hysteresis, making it an excellent material for water capture in arid areas. Sorption reversibility in Co2Cl2(BTDD) has been attributed to continuous water uptake. However, the sharp adsorption/desorption in the isotherms supports a discontinuous first-order transition. Here we use molecular simulations to compute the water adsorption and desorption pathways and isotherms in a Co2Cl2(BTDD) model, to elucidate how does this MOF achieve reversibility despite its large pore size. The simulations reveal a multi-stage mechanism of discontinuous water uptake facilitated by spatial segregation of rows of hydrophilic metal sites bridged by ~1 nm hydrophobic ligands. The multi-stage mechanism breaks the barrier of capillary condensation into smaller, easier to surmount ones, resulting in a facile process despite the sharp density discontinuity between confined liquid and vapor. Our results explain why exchanging Co2+ for Ni2+ or Clfor F- in the MOF have minimal impact on the condensation and desorption pressures. On the other hand, we predict that a decrease in hydrophilicity of the MOF vertices would strongly increase the hysteresis. We expect that the relationships between spatial distribution of hydrophilic sites and hysteresis unraveled in this study assist the design of water harvesting materials with maximal capacity and reversibility.

Zaragoza, Alberto↗