Search NASA⌕ Search

SEARCH · Search NASA

Results for “COMMERCIAL AVIATION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3

Hydrogen Infrastructure Analysis Frameworks for Aviation Applications

While aircraft account for less than 10% of United States (U.S.) transportation energy consumption, it is the only mode expected to see sustained growth in energy demand through 2050. Currently, commercially available aircraft rely heavily on either jet fuel or leaded aviation gasoline. Over the past few decades, concerns have grown over the contributing effects that greenhouse gases, which are produced from fossil fuels, have on the environment.

08 HYDROGEN↗

Sustainable Aviation Fuel: Review of Technical Pathways

The 106-billion-gallon global (21-billion-gallon domestic) commercial jet fuel market is projected to grow to over 230 billion gallons by 2050. Cost-competitive, environmentally sustainable aviation fuels (SAFs) are recognized as a critical part of decoupling carbon growth from market growth. Renewable and wasted carbon can provide a path to low-cost, clean-burning, and low-soot-producing jet fuel. Research shows an opportunity to produce fuel in which aromatics are initially diluted with the addition of renewable iso-alkanes, aromatics are later fully replaced with cycloalkanes, and finally high-performance molecules that provide mission-based value to jet fuel consumers are introduced. Key to this fuel pathway is sourcing the three SAF blendstocks - iso-alkanes, cycloalkanes, and high-performing molecules - from inexpensive resources. When resourced from waste carbon, there are often additional benefits, such as cleaner water when sourcing carbon from wet sludges or less waste going to landfills when sourcing the carbon from municipal solid waste or plastic waste. Jet fuel properties differ from gasoline and diesel, so research will be most successful if it begins with the end result in mind.

09 BIOMASS FUELS↗

An overview of switchgrass phenotypes variability across diverse populations and their implications for conversion to fuels

There have been substantial changes to the human lifestyle over the past two centuries, which are reflected in the amount of fuel we consume to power our day-to-day needs. The way we use these resources has indeed manifested in an overdependence on non-renewable energy sources, such as coal and petroleum, for generating electricity and powering our transportation needs. There is a pressing need to explore alternative ways of fueling our current lifestyle without impacting the environment. Biofuels have long been touted as a sustainable solution for use as drop-in fuels in aviation and maritime applications. Still, they have yet to establish themselves as a competitive commercial alternative, necessitating further research and development. Lignocellulosic biomass is an underutilized resource that is widely accessible for the commercial processing of renewable biofuels. Bioenergy crops, such as switchgrass (Panicum virgatum L.), which can be cultivated on marginal lands with minimal competition for agricultural land, are an ideal and promising candidate for bulk-scale biofuel synthesis. Over the past 30 years, significant progress has been made in breeding and genetically modifying these grasses to enhance their drought resilience and subsequent yields. However, discrepancies in biomass composition can lead to irregular feedstocks for downstream operations, which in turn affect overall production targets for biofuels. Here, this review examines the variability in switchgrass (P. virgatum L.) biomass phenotypes across diverse populations and plant components, and their implications for biofuel conversion. The study highlights significant variations in biomass yield, composition, and cell wall chemistry both between switchgrass genotypes and within individual cultivars. Key findings include differences in cellulose, hemicellulose, and lignin content between leaves and stems, which affect biomass digestibility and ethanol yield. The review also discusses the impact of lignin chemistry, particularly the syringyl/guaicyl (S/G) ratio, on the efficiency of biomass saccharification. Furthermore, it explores how these variations respond differently to various pretreatment techniques, affecting overall biofuel production. We conclude that understanding and quantifying this variability is crucial for optimizing switchgrass as a feedstock for commercial biofuel production, thereby potentially addressing the pressing need for sustainable energy sources in sectors such as aviation.

Kousika, Rohit [Univ. of Tennessee, Knoxville, TN ↗

Data for Development of Vegetative Oil Sorghum: From Lab-to-Field

Biomass crops engineered to accumulate energy-dense triacylglycerols (TAG or ‘vegetable oils’) in their vegetative tissues have emerged as potential feedstocks to meet the growing demand for renewable diesel and sustainable aviation fuel (SAF). Unlike oil palm and oilseed crops, the current commercial sources of TAG, vegetative tissues, such as leaves and stems, only transiently accumulate TAG. In this report, we used grain (Texas430 or TX430) and sugar-accumulating ‘sweet’ (Ramada) genotypes of sorghum, a high-yielding, environmentally resilient biomass crop, to accumulate TAG in leaves and stems. We initially tested several gene combinations for a ‘push-pull-protect’ strategy. The top TAG-yielding constructs contained five oil transgenes for a sorghum WRINKLED1 transcription factor (‘push’), a Cuphea viscosissima diacylglycerol acyltransferase (DGAT; ‘pull’), a modified sesame oleosin (‘protect’) and two combinations of specialized Cuphea lysophosphatidic acid acyltransferases and medium-chain acyl-acyl carrier protein thioesterases. Though intended to generate oils with medium-chain fatty acids, engineered lines accumulated oleic acid-rich oil to amounts of up to 2.5% DW in leaves and 2.0% DW in stems in the greenhouse, 36-fold and 49-fold increases relative to wild-type (WT) plants, respectively. Under field conditions, the top-performing event accumulated TAG to amount to 5.5% DW in leaves and 3.5% DW in stems, 78-fold and 58-fold increases, respectively, relative to WT TX430. Transcriptomic and fluxomic analyses revealed potential bottlenecks for increased TAG accumulation. Overall, our studies highlight the utility of a lab-to-field pipeline coupled with systems biology studies to deliver high vegetative oil sorghum for SAF and renewable diesel production.

Biofuels↗

The Need for a Life Cycle Assessment of Drone-Based Commercial Package Delivery

Commercial freight drones are currently illegal in the U.S. Consequently, commercial interests such as Amazon, Inc. will be lobbying for new regulatory allowances in the coming years. The Federal Aviation Administration and other government entities must balance safety and other public interests against the potential commercial benefits of UAV freight. Controversy over commercial UAV’s has so far centered on the privacy implications of the devices, which are significant. However, no assessment has yet been made of the energy and environmental implications of widespread UAV-based delivery. Such an accounting of environmental impacts would inform current regulatory discussions about whether and how much commercial drone traffic should be permitted.

25 ENERGY STORAGE↗

Launch Alaska Transportation and Energy Accelerator (LATEA)

The Launch Alaska Transportation and Energy Accelerator (LATEA), funded through the U.S. Department of Energy Office of Technology Commercialization’s Energy Program for Innovation Clusters (EPIC),advanced deployment of innovative and efficient transportation and energy technology in Alaska from October 2021 through June 2025. The project was designed to leverage Launch Alaska’s accelerator model to identify, recruit, and support transportation technology companies with novel solutions to market needs while building the stakeholder networks, demonstration opportunities, and institutional capacity necessary to accelerate commercialization in one of the most challenging operating environments in the United States.

08 HYDROGEN↗

Ampaire ARPA-e Electric Flight Testbed

A hybrid-electric aircraft flying testbed was developed in this program with the intent to serve as a dedicated, enduring testbed to test and evaluate ARPA-e CIRCUITS Program and other electrified aviation technologies in relevant flight environments. This testbed enabled rapid development cycles of novel and innovative technologies in the electrified aviation space, maturing them from a research lab environment to flying in an aircraft. By providing research groups with the means to test their transformative technologies in a real-world, aircraft environment, the path to validating the safety and reliability of their technologies for future commercial opportunities was greatly accelerated. Three core technologies were integrated and tested: an inverter/motor drive built by the University of Arkansas, a solid-state circuit breaker (iBreaker) built by the Illinois Institute of Technology, and a Flying Capacitor Multi-level (FCML) DC/DC converter built by the University of California, Berkeley. In each of these cases, the requirements established for safety of flight resulted in a holistic approach to the designs, evoking a deeper understanding of the potential failure modes and mitigations necessary to build a robust and flightworthy system. Further, the integration into a hybrid-electric aircraft de-risked the potential electrical and mechanical issues that cannot easily be experienced or replicated in a lab environment. The experiments were also required to undergo representative temperature, shock, and vibration testing as the FAA prescribes for this category of aircraft, facilitating familiarity with the relevant design and test guidelines necessary to commercialize the technologies. This testbed unlocks the massive potential of core power electronics technologies necessary for a safe, robust, and efficient electric aviation future. With quick iterative design, test, and flight cycles, these core technologies are on a quicker path to technology readiness level maturity and commercialization, enabling a more sustainable future for the aviation industry.

24 POWER TRANSMISSION AND DISTRIBUTION↗

Review of Biojet Fuel Conversion Technologies

Biomass-derived jet (biojet) fuel has become a key element in the aviation industry’s strategy to reduce operating costs and environmental impacts. Researchers from the oil-refining industry, the aviation industry, government, biofuel companies, agricultural organizations, and academia are working toward developing commercially viable and sustainable processes that produce long-lasting renewable jet fuels with low production costs and low greenhouse gas emissions. Additionally, jet fuels must meet ASTM International specifications and potentially be a 100% drop-in replacement for the current petroleum jet fuel. The combustion characteristics and engine tests demonstrate the benefits of running the aviation gas turbine with biojet fuels. In this study, the current technologies for producing renewable jet fuels, categorized by alcohols-to-jet, oil-to-jet, syngas-to-jet, and sugar-to-jet pathways, are reviewed. The main challenges for each technology pathway, including feedstock availability, conceptual process design, process economics, life-cycle assessment of greenhouse gas emissions, and commercial readiness, are discussed. Although the feedstock price and availability and energy intensity of the process are significant barriers, biomass-derived jet fuel has the potential to replace a significant portion of conventional jet fuel required to meet commercial and military demand.

09 BIOMASS FUELS↗

Thermodynamic Limits of Redox-Based Thermochemical Processes (REDOTHERM)

Solar thermochemical fuel production is a potential pathway for the production of sustain liquid drop-in fuels, which can help decarbonize the aviation and maritime sectors. In an attempt to analyze the commercial viability of this technology, several studies have been conducted, including system and technoeconomic analysis (TEA) modeling. However, most studies to date simply assume a given redox reactor efficiency, which is significantly higher than demonstrated values to date. While it is widely recognized that utilizing a counter-current flow (CF) configuration could increase the redox reactor efficiency, an over-simplification in the thermodynamic modeling may lead to unphysical results which has been included in multiple publications. The fact that the solar redox reactor is the least developed component in the process chain makes it hard to identify technology gaps and evaluate pathways to deployment at scale using this approach. In this work, a thermodynamic model for a moving oxide system has been developed, in a general form that allows to analyze the system for different redox-active materials, under a wide range of operating conditions, for both parallel and countercurrent flows. The model capabilites are demonstrated, and the model's code will be shared as an open-source on GitHub in the next few months.

chemical looping↗

Measurement of Spray Chamber Ignition Delay and Cetane Numbers for Aviation Turbine Fuels

Experiments using pure compounds, National Jet Fuels Combustion Program (NJFCP) test fuels, and commercial jet fuels were conducted to demonstrate the equivalence of the indicated cetane number (ICN) and derived cetane number (DCN) for jet fuels. The calibrated range for ICN was also extended to lower cetane number (CN) values (5 to 35) to allow CN quantification for jet fuel synthetic blending components (SBCs) with low CN. ICN and DCN were shown to be highly correlated for values above about 30. This study presents the most comprehensive comparison of these two methods published to date. Because of the importance of low-volume test methods for early-stage SBC production process development, we demonstrated that ICN and DCN can be accurately measured with 15 mL of fuel, well below 40 to 100 mL required by standard methods. ICN or DCN is important for jet fuels because fuels with lower CN are more prone to lean blowout (LBO), an undesirable operational failure in a jet engine. Comparing data on a fuel-to-air ratio (Φ) at LBO for the NJFCP fuels shows similar linear correlations for ICN and DCN. Ignition delay measurements at lower-pressure and higher-temperature conditions may be more directly relevant to LBO. At 675 °C, 0.5 MPa, and a global Φ of roughly 0.68, ignition delay time correlations to LBO were similar to those produced from DCN and ICN. A much weaker correlation was obtained with a global Φ value of 0.34.

09 BIOMASS FUELS↗

Development of vegetative oil sorghum: From lab‐to‐field

Summary Biomass crops engineered to accumulate energy‐dense triacylglycerols (TAG or ‘vegetable oils’) in their vegetative tissues have emerged as potential feedstocks to meet the growing demand for renewable diesel and sustainable aviation fuel (SAF). Unlike oil palm and oilseed crops, the current commercial sources of TAG, vegetative tissues, such as leaves and stems, only transiently accumulate TAG. In this report, we used grain (Texas430 or TX430) and sugar‐accumulating ‘sweet’ (Ramada) genotypes of sorghum, a high‐yielding, environmentally resilient biomass crop, to accumulate TAG in leaves and stems. We initially tested several gene combinations for a ‘push‐pull‐protect’ strategy. The top TAG‐yielding constructs contained five oil transgenes for a sorghum WRINKLED1 transcription factor (‘push’), a Cuphea viscosissima diacylglycerol acyltransferase (DGAT; ‘pull’), a modified sesame oleosin (‘protect’) and two combinations of specialized Cuphea lysophosphatidic acid acyltransferases and medium‐chain acyl‐acyl carrier protein thioesterases. Though intended to generate oils with medium‐chain fatty acids, engineered lines accumulated oleic acid‐rich oil to amounts of up to 2.5% DW in leaves and 2.0% DW in stems in the greenhouse, 36‐fold and 49‐fold increases relative to wild‐type (WT) plants, respectively. Under field conditions, the top‐performing event accumulated TAG to amount to 5.5% DW in leaves and 3.5% DW in stems, 78‐fold and 58‐fold increases, respectively, relative to WT TX430. Transcriptomic and fluxomic analyses revealed potential bottlenecks for increased TAG accumulation. Overall, our studies highlight the utility of a lab‐to‐field pipeline coupled with systems biology studies to deliver high vegetative oil sorghum for SAF and renewable diesel production.

59 BASIC BIOLOGICAL SCIENCES↗

Sustainable Graphite and Jet Fuel from Biorefinery Residue

Abstract Battery‐grade graphite and aviation fuel are traditionally produced from non‐renewable, fossil carbon feedstocks and result in substantial greenhouse gas emissions. Biomass holds exciting potential as a renewable and sustainable feedstock for the production of graphite and aviation fuel, but challenges exist including the necessity of a catalyst when producing graphite and low selectivity when producing aviation fuel. A process to convert a biomass‐derived feedstock into graphite without the use of a catalyst and fuels with high selectivity towards sustainable aviation fuel (SAF) is innovated. Heavy bio‐oil undergoes a conversion process similar to the commercial production of synthetic graphite including coking at 500 °C, calcination at 1000 °C, and graphitization at 2800 °C. The resulting biographite exhibits excellent performance in lithium‐ion battery configurations with specific capacity of ~330 mAh g −1 and a 96.8 % capacity rebound after high rate cycling. The liquid hydrocarbon co‐product from coking is suitable for hydrotreating into SAF. The aviation fuel fraction (70 wt % of the fuel produced) meets ASTM standards and is composed primarily of cycloalkanes (~80 wt %) which improves energy density compared to paraffins produced by other SAF pathways and may replace aromatics for elastomer swelling in traditional jet fuel with less soot production.

09 BIOMASS FUELS↗

Drop-in sustainable aviation fuels enabled by feedstock-agnostic lignin deoxygenation

Current sustainable aviation fuels (SAFs) require blending with petroleum-derived fuels due to incomplete hydrocarbon distributions, most notably a lack of aromatics. Lignin, the most abundant renewable source of aromatics, is a promising feedstock for addressing this limitation. Here, we demonstrate a sequential reductive catalytic fractionation and continuous hydrodeoxygenation process that converts multiple woody feedstocks into aromatic hydrocarbons at up to 93% of the theoretical carbon yield. Blending these products with commercial SAFs produces drop-in compatible fuels with elastomer swell performances equivalent to conventional aviation fuels. The process is adaptable across multiple biomass sources, yielding aromatic hydrocarbons with consistent enthalpic efficiencies and fuel properties. These findings establish a scalable route to 100% drop-in SAFs, leveraging lignin-derived aromatics within the existing biofuels infrastructure.

09 BIOMASS FUELS↗

Sustainable aviation fuels from biomass and biowaste via bio- and chemo-catalytic conversion: Catalysis, process challenges, and opportunities

Sustainable aviation fuel (SAF) production from biomass and biowaste streams is an attractive option for decarbonizing the aviation sector, one of the most-difficult-to-electrify transportation sectors. Despite ongoing commercialization efforts using ASTM-certified pathways (e.g., lipid conversion, Fischer-Tropsch synthesis), production capacities are still inadequate due to limited feedstock supply and high production costs. New conversion technologies that utilize lignocellulosic feedstocks are needed to meet these challenges and satisfy the rapidly growing market. Combining bio- and chemo-catalytic approaches can leverage advantages from both methods, i.e., high product selectivity via biological conversion, and the capability to build C-C chains more efficiently via chemical catalysis. Herein, conversion routes, catalysis, and processes for such pathways are discussed, while key challenges and meaningful R&D opportunities are identified to guide future research activities in the space. Bio and chemo-catalytic conversion primarily utilize the carbohydrate fraction of lignocellulose, leaving lignin as a waste product. This makes lignin conversion to SAF critical in order to utilize whole biomass, thereby lowering overall production costs while maximizing carbon efficiencies. Thus, lignin valorization strategies are also reviewed herein with vital research areas identified, such as facile lignin depolymerization approaches, highly integrated conversion systems, novel process configurations, and catalysts for the selective cleavage of aryl C–O bonds. The potential efficiency improvements available via integrated conversion steps, such as combined biological and chemo-catalytic routes, along with the use of different parallel pathways, are identified as key to producing all components of a cost-effective, 100% SAF.

09 BIOMASS FUELS↗

Midwest Nuclear-based Net-Zero Carbon Steelmaking Demonstration

Globally, the iron and steel industry accounts for around a quarter of GHG emissions from the manufacturing sector , which is about 7% of the 33 gigatonnes (Gt) of global CO 2 emissions . Thus, globally, the steel industry is a 2-3 Gt CO 2 per year emissions challenge. The steel industry is important to the U.S. economy with output equal to $0.5 trillion and domestic production capacity is critical to national defense, infrastructure, energy production, and transportation. President Biden’s executive order on climate identifies actions and policies to put the Nation on a path to achieve net-zero carbon emissions, economy-wide, by no later than 2050. To achieve this, deep carbon reductions in the power, transportation, buildings and capital-intensive industrial manufacturing segments such as steel, cement and chemicals need to be addressed. In its recent “Accelerating Decarbonization of the U.S. Energy System” report , the National Academy of Sciences (NAS) stated that, “while technology exists to decarbonize all parts of the energy system, some sectors remain at precommercial or first-of-a-kind demonstration stages and require significant improvement in cost and performance to become commercially viable.” The NAS goes on to state that these hard to decarbonize sectors include “aviation, shipping, and industrial subsectors such as steel, cement, and chemicals manufacturing .” The Administration has proposed a timeline to decarbonize energy, transportation and then industry and manufacturing. From a life-cycle approach, decarbonizing steel and other large industrial inputs are necessary to decarbonize transformations in energy and transportation. DOE’s TRI-Lab Consortium’s Integrated Energy Systems (IES) program is a collaboration amongst DOE’s three applied energy laboratories: the National Energy Technology Laboratory; National Renewable Energy Laboratory and Idaho National Laboratory. The IES approach looks at more tightly integrating low-carbon nuclear energy, renewable electricity, energy storage, load/demand balancing, and biomass (including plastics and other wastes) with one or more industrial processes that utilize heat and/or power from these clean and waste energy sources to produce a low-carbon commodity-scale product.

08 HYDROGEN↗

Jet Fuel Production at the Pittsburgh Airport: GTL via Fischer-Tropsch Synthesis

The Pittsburgh International Airport (PIT)—with the Allegheny County Airport Authority (which manages PIT)—has established itself as a leader in resiliency by becoming the first major United States (U.S.) airport to have a self-sustaining microgrid, providing electricity, heating, and cooling for airport operations. The microgrid is powered by natural gas and solar power produced on the airport property and was completed in Summer 2021. This study examines the feasibility of producing jet fuel at the airport to provide a secure supply of aviation fuel, furthering PIT’s ability to weather supply disruptions and operate self-sufficiently. Gas-to-liquids (GTL) is a commercially available technology that converts natural gas to liquid hydrocarbons, including synthetic jet fuel. A GTL facility at PIT could convert natural gas from onsite wells to jet fuel, effectively doubling the onsite fuel stores in the event of a supply disruption. Moreover, GTL provides a pathway to renewable jet fuel production and reduced greenhouse gas (GHG) emissions from the aviation sector, particularly if renewable natural gas (RNG) is used as a feedstock or other renewable energy sources are used for energy inputs. This study has found that it would be technically feasible to construct and operate a GTL facility on PIT’s property. The approximately 6,000-barrel per day (BPD) facility evaluated would produce nearly 70 million (MM) gallons (gal) of synthetic jet fuel per year, which could supplant nearly all (85 percent) current jet fuel consumption at PIT. Given the current blend limitation of 50 percent Fischer-Tropsch fuels by volume, the plant would have excess production capacity available for the United States Air Force (USAF) Pittsburgh Air Reserve Station and the USAF 171st Air Refueling Wing co-located at the airport.

03 NATURAL GAS↗

Life cycle energy and environmental impacts of hydroprocessed renewable jet fuel production from pennycress

There is a growing interest in making the overall aviation industry more environmentally-friendly by developing advanced biofuels. In this context, the main driver is establishing feedstocks with lower environmental loads and higher energy use efficiency. The objective of this study was to evaluate the energy requirement and environmental impacts of hydroprocessed renewable jet fuel (HRJ) production from pennycress. The system boundary included pennycress production, logistics, oil extraction and conversion to HRJ, wastewater treatment, and electricity and steam generation. Energy allocation method was used for the analysis. The functional unit was considered to be one GJ of HRJ, and the biorefinery size was considered to be 18.9 million l/yr (5 million gal/yr) HRJ. Energy use efficiency of pennycress-based HRJ production was estimated to be 3.9–5.5 (90% central range), which was higher than that of HRJ from other oilseeds, such as canola. Global warming potential of pennycress-based HRJ (35–49 kgCO 2 eq/GJ of HRJ (90% central range)) was also lower than those of HRJ from similar oilseeds and the commercial jet fuel baseline. Pennycress production was the main contributor to the total energy use and environmental impacts of HRJ production, mainly due to the use of nitrogen fertilizer for production, and fuel combustion for farm operations. Pennycress yield was identified as the most sensitive parameter affecting the energy use efficiency and environmental impacts of HRJ production. Furthermore, the outcomes of this study are useful for identifying the performance targets towards improving energy use efficiency and environmental performance of pennycress-based HRJ production at the commercial scale.

09 BIOMASS FUELS↗