Search NASA⌕ Search

SEARCH · Search NASA

Results for “CONTROLS, SPOILER - COMPLETE WINGS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3

Comparison of Pitching Moments Produced by Plain Flaps and by Spoilers and Some Aerodynamic Characteristics of an NACA 23012 Airfoil with Various Types of Aileron

Sectional characteristics of airfoil having retractable slotted flap with plain, slot-lip, or retractable ailerons are presented for a large range of aileron deflections. The analysis indicated that pitching moments produced by spoilers were less positive than those produced by plain flaps of equal effectiveness, also that pitching moments created by the spoiler increased less with the Mach number than similar moments produced by plain flaps. Positive values of pitching moment decreased as devices were located nearer airfoil leading edge.

PITCHING MOMENTS - AIRFOILS↗

Preliminary flight-test results of an advanced technology light twin-engine airplane /ATLIT/

The present status and flight-test results are presented for the ATLIT airplane. The ATLIT is a Piper PA-34 Seneca I modified by the installation of new wings incorporating the GA(W)-1 (Whitcomb) airfoil, reduced wing area, roll-control spoilers, and full-span Fowler flaps. Flight-test results on stall and spoiler roll characteristics show good agreement with wind-tunnel data. Maximum power-off lift coefficients are greater than 3.0 with flaps deflected 37 deg. With flaps down, spoiler deflections can produce roll helix angles in excess of 0.11 rad. Flight testing is planned to document climb and cruise performance, and supercritical propeller performance and noise characteristics. The airplane is scheduled for testing in the NASA-Langley Research Center Full-Scale Tunnel.

Holmes, B. J.↗

A simulator evaluation of the use of spoilers on a light aircraft

A fixed-base flight simulator was used to evaluate wing spoilers for longitudinal flight path control on a modified Cessna Cardinal aircraft. Spoilers which generated the proper pitching moment to maintain aircraft trim C sub L constant could be used as an effective descent rate control. More than 100 simulated ILS approaches were flown by evaluation pilots using both conventional methods and spoiler descent rate control. Three spoiler control schemes were evaluated during the ILS approaches. Using the spoilers for control, instrument approaches could be flown smoothly and precisely with constant airspeed and pitch attitude. While the spoilers could adequately control ILS approaches, a spoiler system with greater authority would be desirable for use in visual approaches.

Brainerd, C. H.↗

The EET Horizontal Tails Investigation and the EET Lateral Controls Investigation

In the energy efficient transport (EET) Horizontal Tails Investigation, aerodynamic data were measured for five different horizontal tails on a full span model with a wide body fuselage. Three of the horizontal tails were low tail configurations and two were T tail configurations. All tails were tested in conjunction with two wings, a current wide body wing and a high aspect ratio supercritical wing. Local downwash angles and dynamic pressures in the vicinity of the tails were measured using a yaw head rake. The results provide a comparison of the aerodynamic characteristics of the two wing configurations at trimmed conditions for Mach numbers between 0.60 and 0.90. In the EET Lateral Controls Investigation, the control effectiveness of a conventional set of lateral controls was measured over a Mach number range from 0.60 to 0.90 on a high aspect ratio supercritical wing semispan model. The conventional controls included a high speed aileron, a low speed aileron, and six spoiler segments. The wing was designed so that the last 25% of the chord is removable to facilitate testing of various control systems. The current status and an indication of the data obtained in these investigations are presented.

Jacobs, P. F.↗

Effect of retractable-spoiler location on rolling- and yawing-moment coefficients

In this report are presented the results of wind-tunnel tests of retractable spoilers on the upper surface of a Clark Y wing, which have been made as part of an investigation of lateral control devices being conducted by the National Advisory Committee for Aeronautics. Spoilers with chords up to 15.0 percent of the wing chord were tested in several locations on a plain rectangular wing and in two locations on the same wing equipped with a 20.0 percent chord split flap down 60 degrees. Charts are given for four representative angles of attack from which values of rolling- and yawing-moment coefficients may be obtained for spoilers up to 15.0 percent chord located on the upper surface of a Clark Y wing. The tests showed that at low angles of attack practically the same rolling moments can be obtained with a given spoiler at any location back of 30.0 percent of the wing chord, while at high angles of attack there is a definite advantage in locating the spoiler at least as far forward as 30.0 percent of the chord. The yawing moments accompanying a given rolling moment increase positively as the spoiler location is moved forward from the trailing edge of the wing. It is concluded that the 30.0 percent chord location is probably the optimum provided that instantaneous response of the airplane to a control movement can be obtained.

Shortal, J A↗

Preliminary investigation of rolling moments obtained with spoilers on both slotted and plain wings

A wind-tunnel study has been made to determine the possibility of developing spoilers suitable for providing the lateral control for airplanes in place of the usual ailerons. The first tests were made on a model wing with a fixed tip slot, but when it was found that the effectiveness of the spoilers did not depend to any great extent on the slot, tests were made on a plain wing also. In both cases certain spoiler positions were found which were free from the usual adverse rolling moments with small deflections. Five different forms of spoiler were tested, the best ones being simple plates, either straight or slightly curved to fit the contour of the airfoil when not deflected. Sufficient rolling moment can probably be obtained from spoilers of reasonable size to provide satisfactory lateral control for certain types of airplanes.

Weick, Fred E↗