Search NASA⌕ Search

SEARCH · Search NASA

Results for “COPOLYMER”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Implications of styrenic triblock copolymer gel mechanics on midblock bridging fraction

Triblock copolymer gels have garnered considerable scientific interest over the past few decades and are used in a variety of applications including consumer cushioning, pressure-sensitive adhesives, and ballistics gels. While many of their applications rely upon understanding mechanical properties, mechanical studies of block copolymer gels are relatively disjointed with each focusing on specific copolymers, which inherently have a fixed molecular weight and composition. Here, the present study examines the quasistatic mechanical response of styrenic triblock copolymer gels composed of seven unique triblock copolymers at various concentrations. Resultant stress-extension data is fitted with the slip-tube network (STN) theory that describes gel mechanics based upon crosslinked network (G c ) and chain entanglement (G e ) modulus contributions. Collectively, modulus contributions imply that midblock bridging is independent of copolymer identity (i.e., molecular weight and block fraction) and dependent on triblock copolymer concentration via F b ∝ φ ABA 0.91±0.39 over the concentration range examined (φ ABA = 0.05–0.39). Gels composed of a complementary diblock-triblock copolymer pair were subsequently analyzed to explore the influence of interlocking loop-loop and loop-bridge pairs within the effective midblock bridging population. These results point to the presence of a physically significant quantity of interlocked loops, but quantitative analysis was inconclusive.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Upcycling waste PET into functional multiblock copolymers through controlled macromolecular design

Poly(ethylene terephthalate) (PET) oligomers derived from glycolysis depolymerization were converted into multiblock copolymers through diisocyanate-mediated coupling with dihydroxy-terminated oligomers, enabling precise control over copolymer sequence distribution, connectivity, and mechanical performance. Here, we demonstrate that telechelic PET oligomers isolated directly from depolymerized consumer waste can serve as reactive building blocks for the formation of segmented multiblock copolymers, eliminating the need to revert to monomeric feedstocks. Dihydroxy-terminated PET oligomers (Mw ≈ 8 kg mol−1) were coupled with poly(ethylene oxide) (PEO, Mw ≈ 4 kg mol−1) to form PET-PEO multiblock copolymers with high molar mass (Mw ≈ 160 kg mol−1). We further show that the timing of end-capping reactions provides a key control parameter that governs the competition between chain extension and termination, thereby dictating the resulting multiblock architecture and molecular-weight evolution. Evaluation of their mechanical properties reveals that virgin PET exhibits high modulus (∼3 GPa) and strength (43 MPa) but limited ductility (<10% elongation). In contrast, PET–PEO multiblock copolymers retain comparable tensile strength (44 MPa), albeit while exhibiting dramatically enhanced ductility (>90% elongation), forming tougher materials with efficient stress transfer between the rigid PET domains and the flexible PEO segments. When incorporated into PET/PEO blends at low loadings, the multiblock copolymers serve as effective compatibilizers, yielding materials with an intermediate modulus (1.1–1.2 GPa) and improved elongation compared to uncompatibilized blends. Furthermore, the presence of PEO blocks increases water uptake and gas permeability relative to virgin PET, reflecting the tunability of molecular transport through the copolymeric blocks. To our knowledge, this represents the first report of PET–PEO multiblock copolymers derived from post-consumer PET for gas transport applications. These results demonstrate that multiblock copolymer formation from telechelic PET oligomers provides a versatile platform for tailoring the mechanical and transport behavior of polyester-based materials through controlled macromolecular design and establishes a generalizable strategy for transforming consumer plastic waste into functional segmented polymers without requiring complete depolymerization to monomers.

Watson-Sanders, Shelby [Department of Chemistry, U↗
DOE OSTI2025

Exploring Microphase Separation in Semi-Fluorinated Diblock Copolymers: A Combined Experimental and Modeling Investigation

We report the combined experimental and theoretical study of the bulk self-assembly behavior of polystyrene-blockpoly( 2,3,4,5,6-pentafluorostyrene) diblock copolymers. These block copolymers were designed to create highly antagonistic blocks (with a high Flory−Huggins interaction parameter, χ) with minimum disruption to the molecular construct (i.e., only replacing five hydrogen atoms with five fluorine atoms). A large library of diblock copolymers (41 samples) was synthesized by reversible addition− fragmentation chain transfer (RAFT) polymerization to map out a major portion of the phase space. All block copolymers exhibited narrow molecular weight distributions with dispersity (D) values between 1.07 and 1.32, and subsequent thermal annealing revealed phase separation into well-defined nanoscale morphologies depending on their molecular composition, as determined from small-angle X-ray scattering and transmission electron microscopy analyses, with an experimental phase diagram being constructed. The χ value at 25 °C for this block copolymer was estimated to be 0.2 using strong segregation theory, based on trends in phase-separated domain spacing and interfacial width. When applying theoretical approaches, the majority of the domain spacing data trends were captured by a coil−coil diblock copolymer model; however, a better fit to the data for samples with shorter fluorinated blocks was obtained with a rod−coil model, indicating that the chains in these fluorinated blocks likely have a higher inherent stiffness and were thus rod-like. This observation demonstrates that, due to the very high value of χ, a transition from coil−coil to rod−coil behavior can be obtained purely by reducing the length of the stiffer of the two blocks and without varying temperature or the chemical composition of the polymers. Here, this work showcases the presence of strong microphase separation within AB diblock copolymers despite the relatively similar chemical composition of the constituent “A” and “B” units, with a clear transition from rod−coil to coil−coil segregation behavior.

RAFT polymerization↗
DOE OSTI2022

Influence of the Nature of Aliphatic Hydrophobic Physical Crosslinks on Water Crystallization in Copolymer Hydrogels

The local environment within a hydrogel influences the properties of water, including the propensity for ice crystallization. Water-swollen amphiphilic copolymers produce tunable nanoscale environments, which are defined by hydrophobic associations, for the water molecules. In this work, the antifreeze properties for equilibrium-swollen amphiphilic copolymers with a common hydrophilic component, hydroxyethyl acrylate (HEA), but associated through crystalline (octadecyl acrylate, ODA) or rubbery (ethylhexyl acrylate, EHA) hydrophobic segments, are examined. Differences in the efficacy of the associations can be clearly enunciated from compositional solubility limits for the copolymers in water (<2.6 mol % ODA vs ≤14 mol % EHA), and these differences can be attributed to the strength of the association. The equilibrium-swollen HEA-ODA copolymers are viscoelastic solids, while the swollen HEA-EHA copolymers are viscoelastic liquids. Cooling these swollen copolymers to nearly 200 K induces some crystallization of the water, where the fraction of water frozen depends on the details of the nanostructure. Decreasing the mean free path of water by increasing the ODA composition from 10 to 25 mol % leads to fractionally more unfrozen water (66–87%). The swollen HEA-EHA copolymers only marginally inhibit ice (<13%) except with 45 mol % EHA, where nearly 60% of the water remains amorphous on cooling to 200 K. In general, the addition of the EHA leads to less effective ice inhibition than analogous covalently crosslinked HEA hydrogels (19.9 ± 1.8%). These results illustrate that fluidity of confining surfaces can provide pathways for critical nuclei to form and crystal growth to proceed.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Chemically Recyclable Analogs of Styrene–Butadiene Copolymers Enabling Perfectly Linear Ethylene–Styrene Materials with Random Phenyl Distribution

Copolymerization of cyclopentene (CP) and 4-phenylcyclopentene (4PCP) at a full range of comonomer feed ratios is reported using Ru-based ring-opening metathesis polymerization (ROMP) yielding homogeneous copolymers analogous to poly(styrene-ran-1,4-butadiene) and poly(ethylene-ran-styrene) copolymers following hydrogenation under mild conditions. In all cases, total monomer conversions of 86%–92% yielded copolymers with compositions within 4% of monomer feeds. Analysis of equilibrium copolymerization thermodynamics, rarely performed on two cycloolefin monomers with low ring strain energies, provides rational design strategies for negotiating two monomers with different equilibrium monomer concentrations. Inverse-gated decoupled 13 C NMR analysis of dyad sequences on the resulting copolymer microstructures concludes a near-random distribution of comonomer units. The copolymers produced from ROMP have number-average molar masses up to 60 kg mol –1 , moderate dispersities (1.5 ± 0.1), and high trans olefin content (86% ± 2%) while glass-transitions temperatures follow the Fox equation and span the full range between homopolymer extremities of PCP (−96 °C) and P4PCP (17 °C). Unlike most prevulcanized elastomers, these materials undergo facile chemical recycling to monomer, producing complete ring-closing metathesis depolymerization (RCMD) of the polymer back to the CP comonomers. Quantitative olefin hydrogenation produced perfectly linear polyethylene with 4%–16% of the backbone carbons containing a phenyl pendant, analogous to ES copolymers with up to 71.5% w/w styrene units but with random distribution of the aromatic pendants. Thermal properties of these materials are discussed, which span from semicrystalline to amorphous, and with T g values notably less than the reported ES copolymer analogs at similar compositions.

animal feed↗
DOE OSTI2023

Synthesis and morphological characterization of linear and miktoarm star poly(solketal methacrylate)- block -polystyrene copolymers

The synthesis, molecular characterization, and morphological evaluation of AB n, (n = 2,3) miktoarm star block copolymers consisting of poly(glycerol monomethacrylate) (PGMA) and polystyrene (PS) with varying molecular weights and compositions is described. The system is known to demonstrate a remarkably high Flory-Huggins interaction parameter. The corresponding linear diblock copolymer analogues, were synthesized as well, and comparisons with regard to feature dimensions and morphologies are provided. Well-ordered nanostructures of various morphologies were formed with domain spacing as low as 7.2 nm. Different morphologies were attained by some of the topological isomers indicating that in miktoarm star block copolymers the phase boundaries were strongly shifted. Additionally, a triblock ABA analogue was studied to investigate the effect of triblock copolymer conformations. Noteworthy is that for copolymers with different macromolecular architecture leading to similar morphology; different domain spacings were obtained. The synthesis of all the samples was carried out by high-vacuum anionic polymerization techniques. Molecular characterization with Size Exclusion Chromatography (SEC) and Proton Nuclear Magnetic Resonance Spectroscopy ( 1 H NMR) confirmed well-defined copolymers obtained. The morphological characterization was accomplished by Small-Angle X-ray Scattering (SAXS). In conclusion, the observations from this study highlight the potential of incorporating macromolecular architecture in the self-assembly of strongly immiscible block copolymers to attain ultra-small nanofeatures with desired morphologies.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Pendant Group Modifications Provide Graft Copolymer Silicones with Exceptionally Broad Thermomechanical Properties

Graft copolymers offer a versatile platform for the design of self-assembling materials; however, simple strategies for precisely and independently controlling the thermomechanical and morphological properties of graft copolymers remain elusive. Here, using a library of 92 polynorbornene-graft-polydimethylsiloxane (PDMS) copolymers, we discover a versatile backbone-pendant sequence-control strategy that addresses this challenge. Small structural variations of pendant groups, e.g., cyclohexyl versus n-hexyl, of small-molecule comonomers have dramatic impacts on order-to-disorder transitions, glass transitions, mechanical properties, and morphologies of statistical and block silicone-based graft copolymers, providing an exceptionally broad palette of designable materials properties. For example, statistical graft copolymers with high PDMS volume fractions yielded unbridged body-centered cubic morphologies that behaved as soft plastic crystals. By contrast, lamellae-forming graft copolymers provided robust, yet reprocessable silicone thermoplastics (TPs) with transition temperatures spanning over 160 °C and elastic moduli as high as 150 MPa despite being both unentangled and un-cross-linked. Altogether, this study reveals a new pendant-group-mediated self-assembly strategy that simplifies graft copolymer synthesis and enables access to a diverse family of silicone-based materials, setting the stage for the broader development of self-assembling materials with tailored performance specifications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Polydiallylammonium-Polysulfone Multiblock Copolymers for Moisture-Swing Direct Air Capture of Carbon Dioxide

Polysulfones are an important class of materials for a variety of applications due to their excellent strength and thermal stability. Quaternary ammonium polymers are also useful materials due to their ion exchange properties, and such materials with alkaline counterions have been used to capture carbon dioxide (CO 2 ) from ambient air through a moisture-driven mechanism. Herein, we design sulfone-based multiblock copolymers containing ammonium functionalities and demonstrate their potential for CO 2 capture. Specifically, a series of multiblock copolymers containing both polydiallyldimethylammonium (PDADMA) and polysulfone (PSf) blocks were synthesized. PSf blocks provide mechanical integrity, while the PDADMA blocks enable the direct air capture of CO 2 . Multiblock copolymers were synthesized at high yield, and PDADMA(OH)-PSf copolymer films with good flexibility and strength were formed with IECs of 424 μmol/g (17 mol % PDADMA(OH)), 1407 μmol/g (44 mol % PDADMA(OH)), and 1726 μmol/g (50 mol % PDADMA(OH)). Thermogravimetric analysis was used to determine that all films are thermally stable up to 345 °C. Differential scanning calorimetry revealed that the 17 and 44 mol % functionalized PDADMA(OH)-PSf multiblock copolymers showed one T g at 185 °C and 50 mol % PDADMA(OH)-PSf polymer showed a T g at 183 °C and a second T g at 16 °C. Atomic force microscopy showed that the multiblock polymers exhibit disordered phase separation. Furthermore, the copolymer materials displayed moisture-swing direct air capture of CO 2 , opening up pathways to utilize polymer architecture and chemistry to tailor the properties of promising sorbents.

42 ENGINEERING↗
DOE OSTI2022

Controlling Rheology of Fluid Interfaces through Microblock Length of Sequence-Controlled Amphiphilic Copolymers

Previous studies have demonstrated that films of sequence-controlled amphiphilic copolymers display contact angles that depend on microblock size. This suggests that microblock length may provide a means of tuning surface and interfacial properties. In this work, the interfacial rheology of a series of sequence-controlled copolymers, prepared through the addition of bicyclo[4.2.0]oct-1(8)-ene-8-carboxamide (monomer A) and cyclohexene (monomer B) to generate sequences up to 24 monomeric units composed of (A m B n ) i microblocks, where m, n, and i range from 1 to 6. Interfacial rheometry is used to measure the mechanical properties of an air–water interface with these copolymers. As the microblock size increases, the interfacial storage modulus, G', increases, which may be due to an increase in the size of interfacial hydrophobic domains. Small-angle X-ray scattering shows that the copolymers have a similar conformation in solution, suggesting that any variations in the mechanics of the interface are due to assembly at the interface, and not on solution association or bulk rheological properties. This is the first study demonstrating that microblock size can be used to control interfacial rheology of amphiphilic copolymers. Here, the results provide a new strategy for controlling the dynamics of fluid interfaces through precision sequence-controlled polymers.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Miscibility and Cocrystallization in Ethylene–Vinyl Alcohol Copolymer Blends

The compatibility among different ethylene−vinyl alcohol (EVOH) copolymer grades plays a crucial role in determining how easily they can be recycled when present together in a mixed waste stream. In this work, melt miscibility and cocrystallization in 50/50 wt/wt binary blends of EVOH copolymers with differing ethylene content were studied. Blends with up to a 21 mol % difference in composition were analyzed. Thin films of miscible blends appeared homogeneous in the melt as observed under an optical microscope, whereas AFM height images showed that immiscible blends underwent surface roughening due to phase separation. For copolymers with modest composition differences, the blend behaved as a single component, showing single, narrow melting and crystallization peaks in DSC thermograms, indicating cocrystallization at the level of crystal stems. Interestingly, even phase-separated blends demonstrated partial cocrystallization due to partial miscibility of the components in the molten phase-separated domains. The extent of cocrystallization is governed by the difference in freezing points of the components; rapid cooling increased cocrystallization in the blends. The maximum compositional difference allowed for miscibility is not constant but depends on the blend’s average comonomer content, in agreement with the “miscibility window” calculated from literature pressure−volume−temperature behavior for the individual EVOH copolymers and regular mixing theory. This study helps illuminate the effect of copolymer composition on miscibility, as well as cocrystallization behavior in blends of random copolymers with cocrystallizable units.

Cocrystallization↗
DOE OSTI2023

Self-assembly of co-continuous nanostructured copolymer templates with compositional and architectural dispersity

In our previous DOE-supported project (DE-SC0016208), we demonstrated that a particular architecture dubbed ‘randomly end-linked copolymer networks’ (RECNs) led to especially robust self-assembly of disordered cocontinuous nanostructures. Such structures, wherein both microphases are fully percolating in three dimensions, are attractive for a wide-variety of energy-relevant applications including purification membranes, separators in batteries and fuel cells, catalyst supports, and high surface area electrodes. In the current project we sought to substantially extend our fundamental understanding of how different types of randomness in blocky copolymer architecture contribute to the robust formation of disordered cocontinuous nanostructures. To do so, we filled in the sizable gap between the previously studied cases of randomly linked linear multiblock copolymers and RECNs by studying two intermediate cases: (i) random miktoarm star polymers, which contain dispersity in the number of the two chemically-incompatible strands located at each junction and therefore the preferred interfacial curvature of each polymer, and (ii) randomly branched copolymers, which also possess bridging strands that stretch across domains and apply local ‘elastic’ forces to the interfaces. In addition, we studied a different network architecture, statistically crosslinked copolymer networks, that is more straightforward to prepare using chain growth polymerization methods, enabling more facile formation of cocontinuous nanostructures. Finally, we extended our approaches from model systems based on polystyrene and poly(lactic acid) to copolymer architectures containing either (i) polysulfone, an engineering polymer that provides excellent mechanical properties for membrane applications, or (ii) polyacrylonitrile, providing a convenient route to nanoporous carbon materials.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Composition and Configuration Dependence of Glass-Transition Temperature in Binary Copolymers and Blends of Polyhydroxyalkanoate Biopolymers

Polyhydroxyalkanoates (PHAs), a promising class of biomaterials, have gained considerable attention to replace petroleum-based plastics owing to their excellent biocompatibility and biodegradability. Homopolymers of PHA suffer from poor tunability in thermal and mechanical properties. Going from homopolymers to copolymers, the design space can be substantially enhanced by combining two or more monomers in different compositions (i.e., relative ratios of the different monomers) and configurations (i.e., relative positions of the different monomers in the polymer backbone) leading to a substantially large chemical space where application-specific optimization for the targeted functionality can be performed. However, this composition and configuration dependence of properties in the vast PHA copolymer chemical space remains largely unexplored. In this contribution, further building on our past work with PHA homopolymers, we systematically explore these chemical trends for glass-transition temperature (Tg) in PHA copolymers and blends. Overall, our molecular dynamics simulations, utilizing a previously validated force field for PHAs, suggest that these trends are largely governed not only by the homopolymer Tg values but also configuration-dependent interchain interactions in the copolymer system. In particular, our results indicate that the configuration-dependent variation in the target property at a fixed composition can be significant in the presence of hydrogen-bond-forming monomers. These qualitative observations are further rationalized by quantitatively analyzing various closely related atomic level descriptors of copolymers and blends such as monomer mobility, number of hydrogen bonds, and pair correlation functions. The findings presented in this work help to develop a deeper atomistic-level understanding of thermomechanical behavior of PHA-based copolymers and can potentially guide the rational design of biopolymers as environmental-friendly functional materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Highly fluorescent purine-containing conjugated copolymers with tailored optoelectronic properties

Conjugated copolymers containing electron donor and acceptor units in their main chain have emerged as promising materials for organic electronic devices due to their tunable optoelectronic properties. In this work, we describe the use of direct arylation polymerization to create a series of fully π-conjugated copolymers containing the highly tailorable purine scaffold as a key design element. To create efficient coupling sites, dihalopurines are flanked by alkylthiophenes to create a monomer that is readily copolymerized with a variety of conjugated comonomers, ranging from electron-donating 3,4-dihydro-2H-thieno[3,4-b][1,4]dioxepine to electron-accepting 4,7-bis(5-bromo-3-hexylthiophen-2-yl)benzo[c][1,2,5]thiadiazole. The comonomer choice and electronic nature of the purine scaffold allow the photophysical properties of the purine-containing copolymers to be widely varied, with optical bandgaps ranging from 1.96–2.46 eV, and photoluminescent quantum yields as high as Φ = 0.61. Frontier orbital energy levels determined for the various copolymers using density functional theory tight binding calculations track with experimental results, and the geometric structures of the alkylthiophene-flanked purine monomer and its copolymer are found to be nearly planar. The utility of direct arylation polymerization and intrinsic tailorability of the purine scaffold highlight the potential of these fully conjugated polymers to establish structure–property relationships based on connectivity pattern and comonomer type, which may broadly inform efforts to advance purine-containing conjugated copolymers for various applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

The effect of low temperature on poly(3-methyl- N -vinylcaprolactam)- b -poly( N -vinylpyrrolidone) diblock copolymer nanovesicles assembled from all-aqueous media

Nanosized polymeric vesicles (polymersomes) self-assembled from double hydrophilic copolymers of poly(3-methyl-N-vinylcaprolactam) n -b-poly(N-vinylpyrrolidone) m (PMVC n -b-PVPON m ) using all aqueous media are a promising platform for biomedical applications, because of their superior stability over liposomes in vivo and high loading capacity. Herein, we explored the temperature-sensitive behavior of PMVC 58 -b-PVPON 65 vesicles using transmission electron microscopy (TEM), dynamic light scattering (DLS), atomic force microscopy (AFM), and small-angle neutron scattering (SANS) in response to lowering the solution temperature from 37 to 25, 20, 14 and 4 °C. The copolymer vesicles with an average size of 350 nm at 37 °C were assembled from the diblock copolymer dissolved in aqueous solution at 4 °C. We show that while the polymersome's size gradually decreases upon the temperature decrease from 37 to 4 °C, the average shell thickness increases from 17 nm to 25 nm, respectively. SANS study revealed that the PMVC 58 -b-PVPON 65 vesicle undergoes a gradual structure evolution from a dense-shell vesicle at 37–25 °C to a highly-hydrated shell vesicle at 20–14 °C to molecular chain aggregates at 4 °C. From SANS contrast matching study, this vesicle behavior is found to be driven by the gradual rehydration of PMVC block at 37–14 °C. The shell hydration at 20–14 °C also correlated with the 4.4-fold decrease in the relative fluorescence intensity from vesicle-encapsulated fluorescent dye, indicating ~80% of the dye release within 12 hours after the vesicle exposure to 14 °C. No significant (<5%) dye release was observed for the vesicle solutions at 37–20 °C, indicating excellent cargo retention inside the vesicles. Our study provides new fundamental insights on temperature-sensitive polymer vesicles and demonstrates that the copolymer assembly into polymersomes can be achieved by decreasing a copolymer aqueous solution temperature below 14 °C followed by solution exposure to ≥20 °C. This type of all-aqueous assembly, instead of nanoprecipitation from organic solvents or solvent exchange, can be highly desirable for encapsulating a wide range of biological molecules, including proteins, peptides, and nucleic acids, into stable polymer vesicles without a need for organic solvents for dissolution of the copolymers that are amphiphilic at physiologically relevant temperatures of 20–37 °C.

36 MATERIALS SCIENCE↗
NASA NTRS1993

Oxygen plasma resistant phosphine oxide containing imide/arylene copolymers

A series of oxygen plasma resistant imide/arylene ether copolymers were prepared by reacting anhydride-terminated poly(amide acids) and amine-terminated polyarylene ethers containing phosphine oxide units. Inherent viscosities for these copolymers ranged from 0.42 to 0.80 dL/g. After curing, the resulting copolymers had glass transition temperatures ranging from 224 C to 228 C. Solution cast films of the block copolymers were tough and flexible with tensile strength, tensile moduli, and elongation at break up to 16.1 ksi, 439 ksi, and 23 percent, respectively at 25 C and 9.1 ksi, 308 ksi and 97 percent, respectively at 150 C. The copolymers show a significant improvement in resistance to oxygen plasma when compared to the commercial polyimide Kapton. The imide/arylene ether copolymers containing phosphine oxide units are suitable as coatings, films, adhesives, and composite matrices.

Jensen, Brian J.↗
DOE OSTI2022

All-acrylic multigraft copolymer superelastomers

Thermoplastic elastomer compositions comprising acrylic multigraft copolymers are described. The multigraft copolymers comprise a rubbery polyacrylate backbone and a plurality of randomly spaced glassy polyacrylate side chains. The multigraft copolymers can be prepared using a facile grafting through method that can provide copolymers with enhanced purity. The acrylic multigraft copolymers exhibit microphase separated morphologies and “superelastomeric” properties, including an elongation at break, stress at break, and/or strain recovery behavior that exceeds that of conventional triblock copolymer polyacrylate thermoplastic elastomers.

Mays, Jimmy W.↗
DOE OSTI2024

Probing the interface structure of block copolymer compatibilizers in semicrystalline polymer blends

Abstract The use of block copolymers to compatibilize immiscible plastics is an important strategy for upcycling municipal plastic wastes. Multiblock copolymers (MBCPs) have been proven to be more effective compatibilizers than di‐ and tri‐block copolymers. Herein, we probe the interface structure of an effective multiblock copolymer compatibilizer and compare that with an ineffective triblock copolymer (TBCP). The interface activity of the compatibilizers is understood through a combination of small‐angle neutron and x‐ray scatterings (SANS and SAXS), by using deuterated homopolymer matrix and protonated compatibilizers. SANS analysis suggests that the MBCP forms a thicker interface layer (7–9 nm) than the TBCP (0–4 nm). In addition, SANS data seems to point to a stronger tendency for the MBCP to locate at the interface. Both factors contribute to its effectiveness at compatibilizing immiscible homopolymers.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Morphological Studies of Solution-Crystallized Thermoplastic Elastomers with Polyethylene Endblocks and a Random-Copolymer Midblock

Styrenic thermoplastic elastomers (TPEs) in the form of triblock copolymers possessing glassy endblocks and a rubbery midblock account for the largest global market of TPEs worldwide, and typically rely on microphase separation of the endblocks and the subsequent formation of rigid microdomains to ensure satisfactory network stabilization. In this work, the morphological characteristics of a relatively new family of crystallizable TPEs that instead consist of polyethylene endblocks and a random-copolymer midblock composed of styrene and (ethylene-co-butylene) moieties are investigated. Copolymer solutions prepared at logarithmic concentrations in a slightly endblock-selective solvent are subjected to crystallization under different time and temperature conditions to ascertain if copolymer self-assembly is directed by endblock crystallization or vice versa. According to transmission electron microscopy, semicrystalline aggregates develop at the lowest solution concentration examined (0.01 wt%), and the size and population of crystals, which dominate the copolymer morphologies, are observed to increase with increasing aging time. Real-space results are correlated with small- and wide-angle X-ray scattering to elucidate the concurrent roles of endblock crystallization and self-assembly of these unique TPEs in solution.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗