Search NASA⌕ Search

SEARCH · Search NASA

Results for “CPT”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Miniature quantum frequency standard based on the phenomenon of coherent population trapping in vapours of {sup 87}Rb atoms

We report the results of the development and production of a quantum frequency standard (QFS) based on the coherent population trapping (CPT) resonance observed on the D{sub 1} absorption line of {sup 87}Rb atoms. The effect of various physical factors on the QFS frequency is studied, and the optimal physical parameters of the device to attain the best frequency stability are determined. The measured relative frequency instability (Allan deviation) is ∼9 × 10{sup −12} for the averaging time of 1 s, 3 ×10{sup −13} for 1000 s, and 1.5 ×10{sup −12} for 24 hours. For a volume of 60 cm{sup 3}, the power consumption of the entire device is 300 mW. The designed QFS can be used in a new-generation satellite navigation systems with increased accuracy and reliability, as well as for solving a number of other problems of science and technology. (paper)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2022

Nonadiabatic dissociation of molecular Bose-Einstein condensates: Competition between chemical reactions

Here, we provide a framework to solve generic models describing the dissociation of multiple molecular Bose Einstein condensates in a nonadiabatic regime. The competition between individual chemical reactions can lead to non-trivial dependence on critical components such as path interference and symmetries, thus, affecting the final distribution of atomic population. We find an analytical solution for an illustrative example model involving four atomic modes. When the system parameters satisfy CPT symmetry, where C is charge conjugation, P is parity, and T is time-reversal symmetry, our solution predicts a population imbalance between atomic modes that is exponentially sensitive to system parameters. However, a weakly broken symmetry alters the population in each atomic mode and can reverse the population imbalance. Our solution also demonstrates a strong quantum correlation between atomic modes that leads to the spontaneous production of atoms in a multi-mode squeezed state. Moreover, in our framework, a time-dependent non-Hermitian quantum mechanics naturally manifests which can alternatively be realized experimentally in photonic systems.

74 ATOMIC AND MOLECULAR PHYSICS↗
DOE OSTI2023

Measurement of the Λ hyperon lifetime

A new, more precise measurement of the Λ hyperon lifetime is performed using a large data sample of Pb-Pb collisions at $\sqrt{s_{NN}}$=5.02 TeV with ALICE. The Λ and $\bar{Λ}$ hyperons are reconstructed at midrapidity using their two-body weak decay channel Λ→p+π - and $\bar{Λ}$→$\bar{p}$+π + . The measured value of the Λ lifetime is τ Λ =[261.07±0.37(stat.)±0.72(syst.)] ps. The relative difference between the lifetime of Λ and $\bar{Λ}$, which represents an important test of CPT invariance in the strangeness sector, is also measured. The obtained value (τ Λ -τ $\bar{Λ}$ )/τ Λ =0.0013±0.0028(stat.)±0.0021(syst.) is consistent with zero within the uncertainties. Both measurements of the Λ hyperon lifetime and of the relative difference between τ Λ and τ $\bar{Λ}$ are in agreement with the corresponding world averages of the Particle Data Group and about a factor of three more precise.

43 PARTICLE ACCELERATORS↗
DOE OSTI2022

Field study of group effects on the pullout capacity of “deep” helical piles in sand

This paper presents the results of a field load test program used to investigate group effects on the pullout capacity of single-helix “deep” helical piles/anchors in sand. The high tensile capacity and silent installation of helical piles has given them serious consideration as an alternative to conventional deep foundations and anchors for offshore renewable energy structures. New offshore applications may consider the use of groups of helical piles to resist structural loads. Group interaction effects are known to occur in helical piles, but there is a scarcity of field data on groups in sands under tensile loading. This study involved the installation and load testing of single-helix 152mm diameter round shaft piles and pile groups embedded in sand to depths of 12 and 18 helix diameters below the ground surface. The study was designed to explore the effects of close pile spacing, group configuration (i.e., number of piles), and soil strength (i.e., friction angle) as interpreted from cone penetration test (CPT) resistance. The results showed group efficiencies ranging from about 0.6 to 1.0 at a horizontal spacing of 2 to 3 times the helix diameter in sands with friction angles of about 39° to 44°. The data from this study may also be useful for validation of numerical models for analysis of helical pile group interactions.

Engineering↗
DOE OSTI2021

Prospects for beyond the Standard Model physics searches at the Deep Underground Neutrino Experiment: DUNE Collaboration

Abstract The Deep Underground Neutrino Experiment (DUNE) will be a powerful tool for a variety of physics topics. The high-intensity proton beams provide a large neutrino flux, sampled by a near detector system consisting of a combination of capable precision detectors, and by the massive far detector system located deep underground. This configuration sets up DUNE as a machine for discovery, as it enables opportunities not only to perform precision neutrino measurements that may uncover deviations from the present three-flavor mixing paradigm, but also to discover new particles and unveil new interactions and symmetries beyond those predicted in the Standard Model (SM). Of the many potential beyond the Standard Model (BSM) topics DUNE will probe, this paper presents a selection of studies quantifying DUNE’s sensitivities to sterile neutrino mixing, heavy neutral leptons, non-standard interactions, CPT symmetry violation, Lorentz invariance violation, neutrino trident production, dark matter from both beam induced and cosmogenic sources, baryon number violation, and other new physics topics that complement those at high-energy colliders and significantly extend the present reach.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2023

Review—Effects of Solution and Alloy Composition on Critical Crevice Temperature

Critical temperature for localized corrosion can be a good design parameter because localized corrosion is not likely to occur below that temperature. The critical temperature depends on alloy composition, microstructure, and environment chemistry (including its redox potential). This paper reviews the literature on critical temperature for localized corrosion, expressed either as Critical Pitting Temperature (CPT) or Critical Crevice Temperature (CCT). A history of various testing methods is presented. Different approaches for modeling the temperature of transition to active pit growth are reviewed, including probabilistic aspects of critical temperature. A semi-empirical, electrolyte-based, model is described that can be useful in predicting CCT in service environments that differ from standard laboratory test environments. The model predictions are compared to experimental data for various alloys. The effect of solvent on CCT/CPT is described briefly and future avenues of research are recommended.

02 PETROLEUM↗
DOE OSTI2022

ezAlign

The ezAlign is aimed at clustering coarse grain simulation to find common or uncommon occurrences and convert coarse (CG) grained coordinate and topology files to atomistic formats. We use a PointNet based approach to map individual frames of simulation to points in a latent space. These points are then clustered using a variety of clustering methods. Clusters are analyzed to associate them with states in the simulation. Frames can be chosen from these clusters based on proximity to cluster centers. ezAlign takes CG coordinate and topology files and converts and outputs their corresponding atomistic formats using an alignment and relaxation procedure. ezAlign is designed to convert complex, solvated biological systems including lipid membranes with drug-like molecules using GROMACS. A GROMACS checkpoint (.cpt) file is also outputted to enable continuation simulations that retain the equilibrated atomic velocities. Independent atomistic coordinates and topologies for every molecule must already be included in ezAlign/files. A number of commonly simulated biological molecules are currently provided.

Bennett, WilliamF.↗
DOE OSTI2020

Neutrino oscillation phenomenology in the standard model and beyond

Over the last 20 years measurements of neutrino oscillation parameters have become very precise. In the standard neutrino oscillation picture most of the parameters are measured at the percent level. In this thesis we study neutrino oscillations in the standard picture and beyond. We analyze data from all types of neutrino oscillation experiments to obtain a global picture of neutrino oscillations. The remaining unknowns in the standard picture are the value of the CP-violating phase $\delta$, the octant of the atmospheric angle $\theta_{23}$ and the neutrino mass ordering. We discuss the current status of these unknowns and also comment on how well future experiments will do in measuring these quantities, where we discuss new facilities which will observe accelerator, atmossperic and reactor neutrinos. Using oscillation data it is possible to bound a possible violation of the CPT symmetry in the neutrino sector. This is done by performing a fit to neutrino and antineutrino oscillation data separately. We also address the capability of the future experiment DUNE to this scenario. We show that DUNE could improve some of the current bounds considerably. We discuss the sensitivity of DUNE together with the next generation reactor neutrino experiment JUNO to measure quasi-Dirac neutrino oscillations. We find that the future experiments will be able to bound the important quantities, mostly unbounded by current data. Finally, we discuss atmospheric neutrinos at the next generation neutrino telescope ORCA. We show that ORCA will put the best bounds on the invisible neutrino decay of $\nu_3$, coming from neutrino oscillation experiments. We also find that, a scenario like this would not affect the standard measurements of ORCA, namely the determination of the atmospheric neutrino oscillation parameters and the measurement of the neutrino mass ordering.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2024

CalWave's xWave Design for PacWave (Final Technical Report)

CalWave Inc. (CalWave) is developing a wave energy converter (WEC) technology that can generate electricity from ocean waves. CalWave’s design offers a unique approach to wave energy conversion that operates fully submerged and can actively adjust the wave excitation. This capability gives the architecture enhanced survivability in ocean storms without adding significant costs. Prior to this project, CalWave had completed a demonstration of a fully functional WEC system in an open ocean demonstration at nominal 1:5 scale under FOA 1663. The goal of this project was the detailed design, following relevant standards and industry best-practices, of a variant of the xWave WEC technology that can safely and efficiently operate at the DOE’s PacWave South test site for a targeted deployment of up two years. The WEC design and associated review processes proceeded in two distinct project phases: a ‘Preliminary’ and a ‘Final’ design phase. The first phase of the project consisted of the systematic design of the WEC’s key features with regards to appropriate IEC standards. The work resulted in a preliminary design of the xWave hull including structural and Power Take-Off (PTO) load estimates, as well as performance estimates for all ocean conditions the WEC would operate in at PacWave South. Following the first open-water demonstration of CalWave’s small-scale “x1” device under FOA 1663, lessons learned were fed directly into a comprehensive review of the xWave design in the second design phase of this FOA project. CalWave’s work was supported by Sandia National Lab (SNL) and the National Renewable Energy Lab (NREL) on the holistic WEC design, and detailed feedback from specialized partners on hull design, mooring and anchoring specification, and electrical grid interconnection. Optimization of the WEC system was performed using a novel numerical optimization tool developed by Sandia and optimization trends were confirmed via an experimental model scale tank test campaign. Performance estimates for PacWave and a detailed xWave design including integration of all relevant system components were concluded. The mooring design was also concluded in the Final design phase using the most up to date sea floor characterization (CPT) data.

16 TIDAL AND WAVE POWER↗
DOE OSTI2022

8-Plate Multi-Resonant Coupling Using a Class-E 2 Power Converter for Misalignments in Capacitive Wireless Power Transfer

Misalignment is a common issue in wireless power transfer systems. It shifts the resonant frequency away from the operating frequency that affects the power flow and efficiency from the charging station to the load. This work proposes a novel capacitive wireless power transfer (CPT) using an 8-plate multi-resonant capacitive coupling to minimize the effect of misalignments. A single-active switch class-E 2 power converter is utilized to achieve multi-resonance through the selection of different resonant inductors. Simulations show a widening of the resonant frequency band which offers better performance than a regular 4-plate capacitive coupling for misalignments. The hardware results of the 8-plate multi-resonant coupling show an efficiency of 88.5% for the 20.8 W test, which is 18.3% higher than that of the regular 4-plate coupling. Because of the wider resonant frequency band {455–485 kHz}, compared with the regular 4-plate coupling, the proposed design minimized the output voltage drop by 15% for a 10% misalignment. Even for large misalignments, the 8-plate performance improved by 40% compared with the 4-plate coupling.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2021

Markov Chain Monte Carlo Predictions of Neutron-rich Lanthanide Properties as a Probe of r -process Dynamics

Lanthanide element signatures are key to understanding many astrophysical observables, from merger kilonova light curves to stellar and solar abundances. To learn about the lanthanide element synthesis that enriched our solar system, we apply the statistical method of Markov Chain Monte Carlo to examine the nuclear masses capable of forming the r-process rare-earth abundance peak. We describe the physical constraints we implement with this statistical approach and demonstrate the use of the parallel chains method to explore the multidimensional parameter space. We apply our procedure to three moderately neutron-rich astrophysical outflows with distinct types of r-process dynamics. We show that the mass solutions found are dependent on outflow conditions and are related to the r-process path. We describe in detail the mechanism behind peak formation in each case. We then compare our mass predictions for neutron-rich neodymium and samarium isotopes to the latest experimental data from the CPT at CARIBU. Here, we find our mass predictions given outflows that undergo an extended (n,γ)⇌(γ,n) equilibrium to be those most compatible with both observational solar abundances and neutron-rich mass measurements.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2026

Inverse problem in the large momentum effective theory framework

One proposal to compute parton distributions from first principles is the large momentum effective theory (LaMET), which requires the Fourier transform of matrix elements computed nonperturbatively. Lattice quantum chromodynamics (QCD) provides calculations of these matrix elements over a finite range of Fourier harmonics that are often noisy or unreliable in the largest computed harmonics. It has been suggested that enforcing an exponential decay of the missing harmonics helps alleviate this issue. Using nonperturbative data, we show that the uncertainty introduced by this inverse problem in a realistic setup remains significant without very restrictive assumptions, and that the importance of the exact asymptotic behavior is minimal for values of 𝑥 where the framework is currently applicable. We show that the crux of the inverse problem lies in harmonics of the order of 𝜆 = 𝑧⁢𝑃 𝑧 ∼ 5–15, where the signal in the lattice data is often barely existent in current studies, and the asymptotic behavior is not firmly established. We stress the need for more sophisticated techniques to account for this inverse problem, whether in the LaMET or related frameworks like the short-distance factorization. We also address a misconception that, with available lattice methods, the LaMET framework allows a “direct” computation of the 𝑥-dependence, whereas the alternative short-distance factorization only gives access to moments or fits of the 𝑥-dependence.

Dutrieux, Hervé [Aix-Marseille Université, Marseil↗
DOE OSTI2025

Simple nonparametric reconstruction of parton distributions from limited Fourier information

Some calculations of parton distributions from first principles only give access to a limited range of Fourier modes of the function to reconstruct. We present a physically motivated procedure to regularize the inverse integral problem using a Gaussian process as a Bayesian prior. We propose to fix the hyperparameters of the prior in a meaningful physical fashion, offering a simple implementation, great numerical efficiency, and allowing us to understand and keep control easily of the uncertainty of the reconstruction.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2026

Gradient Flow for Parton Distribution Functions: First Application to the Pion

Parton distribution functions (PDFs) are central to precision QCD phenomenology. Their Mellin moments can be computed on the lattice, but direct determinations using local operators, besides ⟨𝑥⟩, face severe challenges from reduced hypercubic symmetry, limiting results to the lowest moments. A recently proposed method resolves these issues using gradient flow. We demonstrate the efficacy of this method by computing ratios of flavor nonsinglet pion PDF moments up to ⟨𝑥 5 ⟩ on four lattice spacings at 𝑚 𝜋 ≃ 411 MeV. The moments and reconstructed PDF agree quantitatively with recent phenomenological extractions.

Francis, Anthony [National Yang Ming Chiao Tung Un↗
DOE OSTI2023

Cone Penetration Tests at the PacWave South Test Site

This ZIP archive contains cone penetration test data from the PacWave South Test Site. The data were collected in September 2023 aboard the ship Seacor Lee operating out of the Port of Newport, OR. The tests were performed by ConeTec using an AP van den Berg ROSON-100. The cone itself was a standard u2-type, 10 cm^2. A total of 22 soundings were performed.

16 TIDAL AND WAVE POWER↗
DOE OSTI2025

Physics Briefing Book: Input for the 2026 update of the European Strategy for Particle Physics

The European Strategy for Particle Physics (ESPP) reflects the vision and presents concrete plans of the European particle physics community for advancing human knowledge in fundamental physics. The ESPP is updated every five-to-six years through a community-driven process. It commences with the submission of specific proposals and other input from the community at large, outlining projects envisioned for the near-, mid-, and long-term future. All submitted contributions are evaluated by the Physics Preparatory Group (PPG), and a preliminary analysis is presented at a Symposium meant to foster a broad community discussion on the scientific value and feasibility of the various ideas proposed. The outcomes of the analysis and the deliberations at the Symposium are synthesized in the current Briefing Book, which provides an important input in the deliberations of the Strategy recommendations by the European Strategy Group (ESG).

de Blas, Jorge [Univ. of Granada (Spain); et al.]↗
DOE OSTI2020

Selection of Well Locations for Saturated Zone Monitoring at the E-Area Low Level Waste Facility

Savannah River Site (SRS) has adopted a revised approach to performance monitoring of the E- Area Low Level Waste Facility (ELLWF) that adds a saturated zone component to the existing vadose zone monitoring program (Kubilius, 2019). The revised monitoring approach specifies that eight additional water table wells be installed near Slit Trench 1 (ST1) and Engineered Trench 2 (ET2). Six wells will be installed at locations characterized in 2017 and 2018. These include four wells near ET2 (ELF001D, ELF002D, ELF003D, and ELF004D) at locations identified by Kubilius (2019) and two wells north of ST1 (ELF005D and ELF006D) at locations finalized in this report. Additionally, two wells (ELF007D and ELF008D) are to be installed at locations south of ST1 based on characterization work completed in 2020 and documented in this report. This area is near well cluster BGX-2 between the Mixed Waste Management Facility (MWMF) and the ELLWF. The area is upgradient of ELLWF and, contamination in the water table aquifer is sourced from MWMF.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2021

Installation of Lysimeters and Monitoring Wells in Support of the Revised Approach to E-Area Performance Monitoring

Savannah River Site (SRS) has developed a revised approach to performance monitoring of the E Area Low Level Waste Facility (ELLWF) that adds a saturated zone component to the existing vadose zone monitoring program (Kubilius, 2019). The revised approach specifies modifications to the vadose zone monitoring program, the addition of new lysimeters at Engineered Trench 3 (ET3), and the installation of water table monitoring wells to complement the existing well network surrounding the ELLWF. This project summary report is intended to provide the final construction details and layout for the new vadose zone lysimeters at ET3 and the water table monitoring wells installed as part of the new saturated zone component of the revised performance monitoring program.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗