Search NASA⌕ Search

SEARCH · Search NASA

Results for “CURIE TEMPERATURE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
NASA NTRS1979

Magnetostriction of some rare earth-aluminum Laves phase compounds

Measurements of the linear and volume magnetostriction of RAl2 cubic Laves compounds in which R is one of the rare earth elements Gd, Dy, Ho or Er, at temperatures between 4.2 K and the Curie temperature of each compound, are reported. Magnetic fields up to 2.5 Tesla were applied, and magnetostriction was measured using standard strain gage techniques. Saturation magnetostrictions of 17 x 10 to the -6th, -1420 x 10 to the -6th, 60 x 10 to the -6th and -920 x 10 to the -6th are determined at 4.2 K for GdAl2, DyAl2, HoAl2 and ErAl2, respectively. Large forced magnetostriction is observed in GdAl2 above the saturation field and the strain temperature dependence shows a decrease in magnitude below 40 K. A linear dependence of magnetostriction on magnetic field was observed for DyAl2 above 40 K, and the observed temperature dependence is interpreted in terms of the lowest order single-ion magnetoelastic theory. An observed decrease in the magnitude of the strain of HoAl2 below 15 K is associated with a change of the easy direction of magnetization, while in the case of ErAl2, magnetostriction is observed to occur normally up to the Curie temperature. Large volume magnetostriction is obtained for all the compounds with the exception of GdAl2.

Pourarian, F.↗
DOE OSTI2021

Development of High Bs Fe-Ni Based Metal Amorphous Nanocomposite by Optimization of Glass Forming Ability

A growing interest in electric vehicles challenges soft magnetic materials to improve efficiency and power density. Metal amorphous nanocomposites (MANCs) have lower coercivities and eddy current losses, allowing for greater efficiency and higher switching frequency. The later allows for high motor speeds and improved power density. However, commercially available and laboratory demonstrated MANCs have shortcomings. Fe-based MANCs, such as FINEMET have excellent magnetic properties, but mechanical properties limit their application in high speed electric motors (HSMs). Fe-Co based MANCs, such as HITPERM, have high saturation inductions and good mechanical properties, but elevated magnetostrictive losses. Co-based MANCs and more recent Fe-Ni based MANCs have low losses and good mechanical properties, but lower saturation inductions (1-1.2 T), that limit power density in HSMs. Recently, much work has explored improving saturation induction in MANCs by increasing the content of magnetic elements, which comes at the cost of glass-forming ability (GFA). These efforts where generally limited to trial and error testing. Additionally, all work to date has focused on Fe-based alloys. In this work, a method of using Thermocalc simulation to locate near-eutectic compositions has been applied to Fe-Ni based alloys. Minima in liquidus temperature and solidification range were found for a ternary composition range and used to identify compositions that retain good GFA as the percentage of magnetic elements is increased. The (Fe 70 Ni 30 ) x (B-Si-Nb) 100-x alloy system for x=82% and x=85% was explored by Thermocalc simulations. This is an increase in magnetic element content compared to previously developed x=80% alloys. 3 compositions in the x=82% system, and 1 alloy in the x=85% system where identified and successfully cast as amorphous ribbon. The amorphous nature of the ribbon was confirmed by a bend test and XRD. Magnetic testing was performed by PPMS to measure saturation induction and Curie temperature of the amorphous material. The Curie temperatures increased to 407-438 °C for the x=82% alloys, and 462 °C for the x=85% alloy. Saturation induction increased to 1.28-1.36 T for the x=82% alloy and 1.48 T for the x=85% alloy, which is a significant improvement over the ~370 °C Curie temperature and 1.2 T saturation of previous Fe-Ni alloy. Crystallization behavior was studied by XRD for the x=85% alloy, showing that crystallization process follows a 2-step process of Amorphous → BCC+FCC+Amorphous → BCC+FCC+Fe 3 B+Fe 23 B 6 . Post annealing magnetic properties were studied by strip testing, and saturation induction as high as 1.48 T was seen after optimal annealing. TEM was used to study structure of as cast and annealed material. 2 alloys with x=82% compositions were identified with an optimal crystalline size of 10-20 nm, while the x=85% alloy had this structure in the as cast state. This opens the possibility of using the alloy in the as cast state, without requiring annealing. In conclusion, alloys with good GFA and improved magnetic properties were identified by Thermocalc simulation.

Krimer, Yuval↗
DOE OSTI2021

Lowering of Tc in Van Der Waals Layered Materials Under In-Plane Strain

The dependence of electromechanical behavior on strain in ferroelectric materials can be leveraged as parameter to tune ferroelectric properties such as the Curie temperature. For van der Waals materials, a unique opportunity arises because of wrinkling, bubbling, and Moiré phenomena accessible due to structural properties inherent to the van der Waals gap. Here, we use piezoresponse force microscopy and unsupervised machine learning methods to gain insight into the ferroelectric properties of layered CuInP2S6 where local areas are strained in-plane due to a partial delamination, resulting in a topographic bubble feature. We observe significant differences between strained and unstrained areas in piezoresponse images as well as voltage spectroscopy, during which strained areas show a sigmoid-shaped response usually associated with the response measured around the Curie temperature, indicating a lowering of the Curie temperature under tensile strain. These results suggest that strain engineering might be used to further increase the functionality of CuInP2S6 through locally modifying ferroelectric properties on the micro- and nanoscale.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Itinerant ferromagnetism in van der Waals Fe 5 – x Ge Te 2 crystals above room temperature

Two-dimensional (2D) van der Waals (vdW) magnets have recently attracted increasing attention, as they provide a novel system for exploring 2D magnetism. However, intrinsic ferromagnetism in 2D systems has almost exclusively been observed at low temperatures, limiting their technological relevance. Fe N Ge Te 2 ( N = 3 , 4, and 5) systems are currently becoming the most attractive 2D vdW materials due to their relatively high Curie temperatures and large saturation magnetization. However, the nature of their complex yet intriguing magnetic behaviors is still unclear, in part due to the multiple inequivalent iron sites and iron vacancies. In this study, we show evolution of magnetic ordering transitions in Fe 5 – x Ge Te 2 with high Curie temperature and a strong saturation magnetization using photoemission electron microscopy and transport measurements. At 275 K, the ferromagnet transitions to a ferrimagnet, and below 110 K transitions to a state with glassy clusters. These are evidenced from temperature-dependent magnetic stripe domain evolution and anisotropic magnetoresistance measurements. Our findings show a clear magnetic ground state of Fe 5 – x Ge Te 2 at room temperature which signals that Fe 5 – x Ge Te 2 system is a very promising candidate for spintronic devices and provides a material design pathway to further increase the Curie temperature and saturation moments in vdW ferromagnets.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2022

Tunable Ferromagnetism in LaCoO 3 Epitaxial Thin Films

We report ferromagnetic insulators play a crucial role in the development of low-dissipation quantum magnetic devices for spintronics. Epitaxial LaCoO 3 thin film is a prominent ferromagnetic insulator, in which the robust ferromagnetic ordering emerges owing to epitaxial strain. Whereas it is evident that strong spin-lattice coupling induces ferromagnetism, the reported ferromagnetic properties of epitaxially strained LaCoO 3 thin films are highly consistent. For example, even under largely modulated degree of strain, the reported Curie temperatures of epitaxially strained LaCoO 3 thin films lie in a narrow range of 80–85 K, without much deviation. In this study, substantial enhancement (≈18%) in the Curie temperature of epitaxial LaCoO 3 thin films is demonstrated via crystallographic orientation dependence. By changing the crystallographic orientation of the films from (111) to (110), the crystal-field energy is reduced and the charge transfer between the Co and O orbitals is enhanced. These modifications lead to a considerable enhancement of the ferromagnetic properties (including the Curie temperature and magnetization), despite the identical nominal degree of epitaxial strain. The findings of this study provide insights into facile tunability of ferromagnetic properties via structural symmetry control in LaCoO 3 .

36 MATERIALS SCIENCE↗
DOE OSTI2022

High Entropy Oxide Relaxor Ferroelectrics

Relaxor ferroelectrics are important in technological applications due to strong electromechanical response, energy storage capacity, electrocaloric effect, and pyroelectric energy conversion properties. Current efforts to discover and design materials in this class generally rely on substitutional doping as slight changes to local compositional order can significantly affect the Curie temperature, morphotropic phase boundary, and electromechanical responses. In this work, we demonstrate that moving to the strong limit of compositional complexity in an ABO 3 perovskite allows stabilization of relaxor responses that do not rely on a single narrow phase transition region. Entropy-assisted synthesis approaches are utilized to synthesize single-crystal Ba(Ti 0.2 Sn 0.2 Zr 0.2 Hf 0.2 Nb 0.2 )O 3 [Ba(5B)O] films. The high levels of configurational disorder present in this system are found to influence dielectric relaxation, phase transitions, nanopolar domain formation, and Curie temperature. Temperature-dependent dielectric, Raman spectroscopy, and second-harmonic generation measurements reveal multiple phase transitions, a high Curie temperature of 570 K, and the relaxor ferroelectric nature of Ba(5B)O films. The first-principles theory calculations are used to predict possible combinations of cations to design relaxor ferroelectrics and quantify the relative feasibility of synthesizing these highly disordered single-phase perovskite systems. Further, the ability to stabilize single-phase perovskites with various cations on the B-sites offers possibilities for designing high-performance relaxor ferroelectric materials for piezoelectric, pyroelectric, and electrocaloric applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Effect of Composition on the Phase Structure and Magnetic Properties of Ball-Milled LaFe11.71-xMnxSi1.29H1.6 Magnetocaloric Powders

Magnetocaloric alloys are an important class of materials that enable non-vapor compression cycles. One promising candidate for magnetocaloric systems is LaFeMnSi, thanks to a combination of factors including low-cost constituents and a useful curie temperature, although control of the constituents’ phase distribution can be challenging. In this paper, the effects of composition and high energy ball milling on the particle morphology and phase stability of LaFe11.71-xMnxSi1.29H1.6 magnetocaloric powders were investigated. The powders were characterized with optical microscopy, dynamic light scattering, X-ray diffraction (XRD), and differential scanning calorimetry (DSC). It was found that the powders retained most of their original magnetocaloric phase during milling, although milling reduced the degree of crystallinity in the powder. Furthermore, some oxide phases (<1 weight percent) were present in the as-received and milled powders, which indicates that no significant contamination of the powders occurred during milling. Finally, the results indicated that the Curie temperature drops as Fe content decreases (Mn content increases). In all of the powders, milling led to an increase in the Curie temperature of ~3–6 °C.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Tetragonal structure and uniaxial magnetic anisotropy in the arc-melted (Ce,Zr) 2 (Fe,M) 17 (M = Mo, W, Co) alloys

The tetragonal ThMn 12 -type structure is stabilized in (Ce 1-x Zr x ) 2 T 16 M (x = 0.2 – 0.3; T = Fe or Fe/Co, M = Mo or W) arc-melted alloys. Approximately 5 at% of Mo or W admixture is sufficient to transform the hexagonal Th 2 Ni 17 -type structure of (Ce 1-x Zr x ) 2 Fe 17 into the tetragonal ThMn 12 -type structure of nearly single-phase (Ce 1-x Zr x ) 2 Fe 16 M and/or (Ce 1-x Zr x ) 2 Fe 15 CoM bulk alloys. X-ray Rietveld refinements reveal that Zr and Mo (W) substitute different sites in the tetragonal crystal structure. Zirconium preferentially replaces Ce, whereas Mo (W) substitutes Fe. At room temperature, the tetragonal phases exhibit strong ferromagnetism and a uniaxial magneto-crystalline anisotropy with anisotropy fields of 15 – 17 kOe. These materials possess room-temperature saturation magnetizations of 95 – 105 emu/g and Curie temperature of 420 – 505 K. At some concentrations, concurrent Zr and Mo (W) site occupancy facilitates 1:12 structure formation in bulk alloys with minimal presence of non-magnetic element in the Fe sublattice, thus securing the highest known magnetic moment per Fe atom (∼ 1.37 µ B ) in this type of materials. The intrinsic magnetic characteristics, as well as the absence of critical rare earths (RE), make these compounds interesting for development as low-cost permanent magnets. In conclusion, small Co additions improve the Curie temperature, especially if combined with W.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Semihard magnetic properties of TiFe 2.5 iron-rich Laves phase and the effect of 4d- and 5d-element-substitutions for Ti

Rare-earth-free compounds exhibiting modest intrinsic hard magnetic properties may still yield viable permanent magnets if their constituent elements are abundant and inexpensive, and the properties are at least comparable to those of the hard ferrites. In this study, one such compound, the off-stoichiometric TiFe 2.5 Laves phase with the hexagonal C14 crystal structure, was found to exhibit – in addition to the already known room-temperature ferromagnetism – a uniaxial, albeit weak, magnetic anisotropy. With a Curie temperature of 422 K, saturation magnetization of 55.3 Am 2 /kg and magnetic hardness parameter of 0.97 this semihard compound is just below the threshold for being of interest for the development into permanent magnets. Replacing a small fraction of Ti with the 4d Nb and Mo or with the 5d Ta or W increases the anisotropy field, but only below room temperature. Replacing Ti with Zr or Hf increases the Curie temperature and leads to a spin reorientation below 200 K. All these substitutions, as well as combined (Zr,W) and (Nb,W) substitutions, fail to improve the room-temperature intrinsic hard magnetic properties of the Fe-rich Laves phase. Furthermore, an attempt to develop a room-temperature coercivity through high-energy ball-milling yielded a value of 0.026 T, an unusually small 2.9% fraction of the anisotropy field. Here, defects inherent in the C14 crystal lattice may be responsible for the underperformance.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Temperature dependent striction effect in a single crystalline Nd 2 Fe 14 B revealed using a novel high temperature resistivity measurement technique

In this work, we studied the temperature dependence of resistivity in a single crystalline Nd 2 Fe 14 B using a newly developed high temperature probe. This novel probe employs mechanical pin connectors instead of conducting glue/paste. From warming and cooling curves, the Curie temperature was consistently measured around T c = 580 K. In addition, anomalous discrete jumps were found only in cooling curves between 400 and 500 K, but not shown in warming curves. More interestingly, when the jumps occurred during cooling, the resistivity was increased. This phenomenon could possibly be due to a temperature dependent striction effect induced by the re-orientation of magnetic domains well below the Curie temperature. Further microscopic study is needed to confirm this effect.

permanent magnet↗
DOE OSTI2020

Tunable structural and magnetic properties of NiAs-type Mn x Sb (1.00≤x≤1.30) compounds

Mn-based alloys can exhibit a variety of magnetic properties related to their tunable exchange interactions. Here, structural and magnetic properties of hexagonal NiAs-type Mn x Sb (1.00≤x≤1.30) compounds are studied with a combination of X-ray diffraction, neutron diffraction, and magnetic measurements. It is found that the magnetization, Curie temperature, and magnetocrystalline anisotropy of Mn x Sb compounds can be tuned by controlling Mn concentration and doping at interstitial (2d) sites. With increasing Mn concentration, magnetic moments of Mn atoms decrease and deviate gradually from the ab-plane to the c-axis for 1.20≤x≤1.22 at room temperature, which leads to a decrease of the Curie temperature T c and the spin reorientation temperature T SR . By doping with nonmagnetic elements, a substantial room-temperature magnetocaloric effect without magnetic hysteresis was achieved for Mn 1.12 Zr 0.1 Sb compound, which is highly beneficial to the practical magnetic refrigeration application.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Structural, electronic, and magnetic properties of CoFeVGe-based compounds: Experiment and theory

We have carried out a combined theoretical and experimental investigation of both stoichiometric and nonstoichiometric CoFeVGe alloys. In particular, we have investigated CoFeVGe, Co 1.25 Fe 0.75 VGe, Co 0.75 Fe 1.25 VGe, and CoFe 0.75 VGe bulk alloys. Our first principles calculations suggest that all four alloys show ferromagnetic order, where CoFeVGe, Co 1.25 Fe 0.75 VGe, and Co 0.75 Fe 1.25 VGe are highly spin polarized with spin polarization values of over 80%. However, the spin polarization value of CoFe 0.75 VGe is only about 60%. We have synthesized all four samples using arc melting and high-vacuum annealing at 600 °C for 48 hours. The room temperature x-ray diffraction of these samples exhibits a cubic crystal structure with disorder. All the samples show single magnetic transitions at their Curie temperatures, where the Curie temperature and high field (3T) magnetization are 288 K and 42 emu/g; 305 K and 1.5 emu/g; 238 K and 39 emu/g; and 306 K and 35 emu/g for CoFeVGe, Co 1.25 Fe 0.75 VGe, Co 0.75 Fe 1.25 VGe, and CoFe 0.75 VGe, respectively.

36 MATERIALS SCIENCE↗
NASA NTRS1998

Raman and Photoluminescence Spectroscopy of Nano-crystalline PbTiO3 Sensor Materials with Different Doping Ions

Raman spectra & photoluminescence studies in PbTiO3, have been carried out, as a function of particle size, temperature, pressure and dopants. There appears respectively a distinct temperature-induced soft mode phase transition in each sample whose Curie temperature can be determined from the mean-field theory. The detailed Curie temperature shift in the modified PbTiO3 ceramics by Ba, Sr, La and Zr, has been investigated as a function of particle size. Pressure-induced phase transitions display an obvious diffuse behavior. Room temperature photoluminescence for nanocrystalline Ba(1-x)Pb(x)TiO3 have been observed. These studies favor preparations of high efficiency PbTiO3 sensors.

Katiyar, R. S.↗
DOE OSTI2025

Kinetic Understanding of Field-Induced Phase Transition from Tetragonal to Ferroelectric Orthorhombic Phase in Ferroelectric CeO 2 –HfO 2 –ZrO 2 Films

The ferroelectric properties and structural phase transition behaviors of fluorite-type CeO 2 −HfO 2 −ZrO 2 films were investigated. The epitaxial films on indium tin oxide (ITO) (111)/yttria-stabilized zirconia (YSZ) (111) substrates were grown through pulsed laser deposition at room temperature and subsequently heat-treated at 1000 °C under a N 2 gas flow. The crystalline phases and Curie temperatures of the films were investigated by X-ray diffraction. An increase in the Ce or Zr content in the films led to a higher crystallographic symmetry, such as orthorhombic or tetragonal. In addition, electrical characterization revealed that the orthorhombic films and some of the tetragonal films displayed ferroelectricity. This was due to the field-induced phase transition from the tetragonal to ferroelectric orthorhombic phase in the films, where the Curie temperatures were relatively low. The tetragonal metastable phase was kinetically frozen and could not change into the stable orthorhombic phase at such a low temperature. The critical electric field where the field-induced phase transition occurred was below 0.8 MV/cm, which was sufficiently small compared to the coercive field. These results evidence the kinetic driving force that causes a field-induced phase transition from the paraelectric tetragonal phase to the ferroelectric orthorhombic phase in HfO 2 -based ferroelectrics. They also enhance our understanding of the thermodynamic phase stabilities of HfO 2 -based material polymorphs.

36 MATERIALS SCIENCE↗
NASA NTRS1984

Petrologic model of the northern Mississippi Embayment based on satellite magnetic and ground-based geophysical data

A petrologic model of the northern Mississippi Embayment, derived from gravity, seismic and rift data, is evaluated by converting the model to a magnetization model which is compared with satellite magnetic anomaly models. A magnetization contrast of approximately -0.54 A/m, determined from the petrologic model of the embayment compares favorably to values of -0.62 A/m and -0.45 A/m from a Magsat United States Apparent Magnetization Contrast Map and a published POGO magnetization contrast model, respectively. The petrologic model suggests that the magnetic anomaly low associated with the Mississippi Embayment may be largely due to the intrusion under non-oxidizing conditions of low Curie temperature gabbroic material at the base of the crust of the embayment. Near-surface mafic plutons, bordering the Mississippi Valley Graben, appear from aeromagnetic data to have higher magnetizations than the deeper gabbroic material; however, it is impossible to ascertain if this is due to compositional differences or similar material at shallower (lower temperature) depths. These results indicate that variations in the Curie temperatures of intrusions accompanying rifting may account for a large part of the wide range of magnetic anomalies associated with presently inactive rifts with normal heat flow.

Thomas, H. H.↗
DOE OSTI2023

Analysis of ultrafast magnetization switching dynamics in exchange-coupled ferromagnet–ferrimagnet heterostructures

Magnetization switching in ferromagnets has so far been limited to the current-induced spin–orbit–torque effects. Recent observation of helicity-independent all-optical magnetization switching (HI-AOS) in an exchange-coupled ferromagnet–ferrimagnet (FM-FEM) heterostructures expanded the range and applicability of such ultrafast heat-driven magnetization switching. Here we report the element-resolved HI-AOS dynamics of such an exchange-coupled system, using a modified microscopic three-temperature model. We have studied the effect of (i) the Curie temperature of the FM, (ii) FEM composition, (iii) the long-range Ruderman–Kittel–Kasuya–Yosida (RKKY) exchange-coupling strength, and (iv) the absorbed optical energy on the element-specific time-resolved magnetization dynamics. The phase-space of magnetization illustrates how the RKKY coupling strength and the absorbed optical energy influence the switching time. Our analysis demonstrates that the threshold switching energy depends on the composition of the FEM and the switching time depends on the Curie temperature of the FM as well as RKKY coupling strength. Importantly, this simulation anticipates new insights into developing faster and more energy-efficient spintronics devices.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Effects of tensile loading during annealing of alnico melt spun ribbons

Conventional magnetic annealing (MA) of the permanent magnet alloy alnico involves application of an external magnetic field at temperatures within the spinodal decomposition range. This field biases the growth of the Fe-Co rich, ferromagnetic α 1 -phase in an energetically favorable 〈001〉 direction in alignment with the applied field within an Al-Ni rich, paramagnetic α 2 -phase. Utilizing a magnetic field to bias the α 1 -phase may limit alnico from reaching theoretical coercivity due to (1) the field having maximum biasing ability at temperatures near the Curie temperature where large α 1 -phase nanorods form and (2) connectivity of the α 1 -phase occurs unavoidably during MA. Both decrease the effective shape anisotropy of the α 1 -phase, thereby reducing coercivity. Herein, we explore tensile-loading as a biasing mechanism to control and optimize the final alnico nanostructure beyond that achieved by MA. Two samples of melt-spun alnico were heat-treated at 860 °C for 5 minutes: one sample was subjected to 10 MPa tensile stress for comparison with a stress-free control sample. Structural and magnetic characterization revealed that the stress-annealed ribbon sample possessed expected phase assemblages, but was distinguished by a ∼2× larger grain diameter and an elongated anisotropic α 1 -phase within grains that were oriented to a shear stress along 〈001〉 directions at an angle of ∼45° relative to the loading direction. Both types of annealing produced a similar increase in the coercivity and remanence, but a decrease in saturation magnetization.

Rinko, E. A.↗
DOE OSTI2023

Field orientation dependent magnetic phases in the Weyl semimetal Co 3 ⁢Sn 2 ⁢S 2

Magnetism plays a key role in the emergence of topological phenomena in the Weyl semimetal Co 3 ⁢Sn 2 ⁢S 2 , which exhibits ferromagnetic interactions along the c-axis of the crystal and antiferromagnetic (AFM) interactions within the ab plane. Extensive studies on the temperature dependence of the magnetism with the magnetic field along the c-axis have uncovered a number of magnetic phases. Currently, the nature and origins of the reported magnetic phases are under debate. Here, in this work, we report on magnetic field orientation effects on the magnetism in Co 3 ⁢Sn 2 ⁢S 2 . The shape of the hysteresis loop of the Hall resistance at a fixed temperature is found to change from rectangular to bow tie-like as the magnetic field is tilted from the c-axis toward the ab plane, resembling that reported for magnetic fields along the c-axis as the temperature approaches the Curie temperature from below. Unlike their temperature-dependent counterparts, the newly observed bow tie-like hysteresis loops show exchange bias. Our results showcase the contribution of the in-plane AFM interactions to the magnetism in Co 3 ⁢Sn 2⁢ S 2 and demonstrate a new way to tune its magnetic phases. They also shed light on the temperature-dependent magnetic phases occurring in the magnetic field along the c-axis of the crystal.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗