Search NASA⌕ Search

SEARCH · Search NASA

Results for “Carrier mobility”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Revealing charge carrier dynamics and transport in Te-doped GaAsSb and GaAsSbN nanowires by correlating ultrafast terahertz spectroscopy and optoelectronic characterization

Recent advances in the growth of III-V semiconductor nanowires (NWs) hold great promise for nanoscale optoelectronic device applications. It is established that a small amount of nitrogen (N) incorporation in III-V semiconductor NWs can effectively red-shift their wavelength of operation and tailor their electronic properties for specific applications. Still, understanding the impact of N incorporation on non-equilibrium charge carrier dynamics and transport in semiconducting NWs is critical in achieving efficient semiconducting NW devices. In this work, ultrafast optical pump-terahertz probe spectroscopy has been used to study non-equilibrium carrier dynamics and transport in Te-doped GaAsSb and dilute nitride GaAsSbN NWs, with the goal of correlating these results with electrical characterization of their equilibrium photo-response under bias and low-frequency noise characteristics. Nitrogen incorporation in GaAsSb NWs led to a significant increase in the carrier scattering rate, resulting in a severe reduction in carrier mobility. Carrier recombination lifetimes of 33 ± 1 picoseconds (ps) and 147 ± 3 ps in GaAsSbN and GaAsSb NWs, respectively, were measured. The reduction in the carrier lifetime and photoinduced optical conductivities are due to the presence of N-induced defects, leading to deterioration in the electrical and optical characteristics of dilute nitride NWs relative to the non-nitride NWs. Finally, we observed a very fast rise time of ~2 ps for both NW materials, directly impacting their potential use as high-speed photodetectors.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Computational Evaluation of Carriers in Facilitated Transport Membranes for Postcombustion Carbon Capture

Incorporating molecular amines as mobile carriers in facilitated transport membranes (FTMs) has been demonstrated to significantly enhance the CO 2 permeance and CO 2 /N 2 selectivity of the membrane for CO 2 capture from flue gas. In this study, by employing computational techniques including density functional theory calculations and molecular simulations, the role of mobile carriers has been systematically studied at a molecular level from the perspectives of the amine–CO 2 reaction chemistry, diffusivities of carriers and gases, and N 2 solubility. The latter two properties were also investigated as a function of water uptake. The water uptake values of FTMs were experimentally quantified too. The introduction of mobile carriers was shown to substantially enhance the diffusivities of CO 2 reaction products compared to FTMs without mobile carriers. The choice of mobile carriers was also demonstrated to influence the separation performance. Computationally, 2-(1-piperazinyl)ethylamine sarcosinate (PZEA-Sar) exhibited a faster reaction kinetics and slightly higher CO 2 absorption capacity as compared to piperazine glycinate (PZ-Gly). Experimentally, the FTM incorporating PZEA-Sar mobile carriers also showed a higher CO 2 permeance. The good agreement validated the computational models employed and insights generated in this study. In conclusion, the outcomes of this work shed light on the future design and selection of carrier structures, and the adopted computational approaches can be employed to discover promising mobile carrier candidates.

20 FOSSIL-FUELED POWER PLANTS↗
DOE OSTI2023

Eliminating the Imbalanced Mobility Bottlenecks via Reshaping Internal Potential Distribution in Organic Photovoltaics

The imbalanced carrier mobility remains a bottleneck for performance breakthrough in even those organic solar cells (OSCs) with recorded power conversion efficiencies (PCEs). Herein, a counter electrode doping strategy is proposed to reshape the internal potential distribution, which targets to extract the low mobility carriers at far end. Device simulations reveal that the key of this strategy is to partially dope the active layer with a certain depth, therefore it strengthens the electric field for low mobility carriers near counter electrode region while avoids zeroing the electric field near collection electrode region. Taking advantage of these, PCE enhancements are obtained from 15.4% to 16.2% and from 16.9% to 18.0%, respectively, via cathode p-doping and anode n-doping. Extending its application from opaque to semitransparent devices, the PCE of dilute cell rises from 10.5% to 12.1%, with a high light utilization efficiency (LUE) of 3.5%. The findings provide practical solutions to the core device physical problem in OSCs.

14 SOLAR ENERGY↗
DOE OSTI2022

Ionic Modulation at the LaAlO 3 /KTaO 3 Interface for Extreme High-Mobility Two-Dimensional Electron Gas

Due to the coexistence of many emergent phenomena, including 2D superconductivity and a large Rashba spin-orbit coupling, 5d transition metal oxides-based two-dimensional electron systems (2DESs) have been prospected as one of the potential intrants for modern electronics. However, despite the lighter electron mass, the mobility of carriers, a key requisite for high-performance devices, in 5d-oxides devices remains far behind their 3d-oxides analogs. The carriers’ mobility in these oxides is significantly hampered by the inevitable presence of defects. Here, in this study, very high mobility (≈22 650 cm 2 V –1 s –1 ) of 5d-2DES confined at the LaAlO 3 /KTaO 3 interface is reported. The high mobility, which is beyond the values observed in SrTiO 3 2DESs in the same carrier-density range, is achieved using the ionic-liquid gating at room temperature. The authors postulate that the ionic-liquid gating affects the oxygen vacancies and efficiently reduces any disorder at the interface. Investigating density and mobility in a broad range of back-gate voltage, the authors reveal that the mobility follows the power-law µ ∝ n 1.2 , indicating the very high quality of ionic-liquid-gated LaAlO 3 /KTaO 3 devices, consistent with the postulate. Furthermore, the analysis of the quantum oscillations confirms that the high-mobility electrons occupy the electronic sub-bands emerging from the Ta:5d orbitals of KTaO 3 .

36 MATERIALS SCIENCE↗
DOE OSTI2022

Computational Prediction of Water Sorption in Facilitated Transport Membranes

Polymeric facilitated transport membranes (FTMs) have emerged as an innovative class of promising carbon capture technology. Studies have shown that the transport properties of an FTM are significantly influenced by its water uptake. In order to better quantify FTM performance, we herein explore the potential of computational techniques to predict the equilibrium water uptake values of FTMs. Two prediction approaches were examined. First, the water sorption was explicitly simulated by iteratively conducting grand canonical Monte Carlo (GCMC) and molecular dynamics (MD) simulations. Second, the water sorption was predicted based on the chemical potential of the adsorbed water, which was calculated using the Widom insertion or continuous fractional component Monte Carlo (CFCMC) method. The chemical potential-based approach with CFCMC demonstrated good prediction of the equilibrium water uptake values of FTMs with poly(N-vinylformamide-co-vinylamine) as fixed-site carrier and 2-(1-piperazinyl)ethylamine sarcosinate as mobile carrier. The predicted water uptake values increased with increasing mobile carrier content and were in good agreement with the experimental values. Furthermore, the higher water uptake promoted the diffusion of CO 2 , N 2 , and mobile carrier as well as slightly stifled the sorption of N 2 . Such an approach significantly contributes to a more comprehensive theoretical evaluation of FTMs.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Significant Efficiency Enhancements in Non‐Y Series Acceptors by the Addition of Outer Side Chains

Abstract Most current highly efficient organic solar cells utilize small molecules like Y6 and its derivatives as electron acceptors in the photoactive layer. In this work, a small molecule acceptor, SC8‐IT4F, is developed through outer side chain engineering on the terminal thiophene of a conjugated 6,12‐dihydro‐dithienoindeno[2,3‐d:2′,3′‐d′]‐s‐indaceno[1,2‐b:5,6‐b′]dithiophene (IDTT) central core. Compared to the reference molecule C8‐IT4F, which lacks outer side chains, SC8‐IT4F displays notable differences in molecule geometry (as shown by simulations), thermal behavior, single‐crystal packing, and film morphology. Blend films of SC8‐IT4F and the polymer donor PM6 exhibit larger carrier mobilities, longer carrier lifetimes, and reduced recombination compared to C8‐IT4F, resulting in improved device performance. Binary photovoltaic devices based on the PM6:SC8‐IT4F films reveal an optimal efficiency over 15%, which is one of the best values for non‐Y type small molecule acceptors (SMAs). The resultant devices also show better thermal and operational stability than the control PM6:L8‐BO devices. SC8‐IT4F and its blend exhibit a higher relative degree of crystallinity and π coherence length, compared to C8‐IT4F samples, beneficial for charge transport and device performance. The results indicate that outer side chain engineering on existing small electron acceptors can be a promising molecular design strategy for further pursuing high‐performance organic solar cells.

He, Qiao [Department of Chemistry and Centre for P↗
DOE OSTI2022

Development and Prospects of Halide Perovskite Single Crystal Films

Halide perovskite single crystal (HPSC) films have demonstrated extraordinary performance in solar cells, photodetectors, and lighting applications, owing to the high carrier mobility, long carrier diffusion length, tunable bandgap, and large light absorption coefficients of these materials. Here, the recent development of the major HPSC thin films is reviewed systematically, including MAPbI 3 , α-FAPbI 3 , MAPbBr 3 , CsPbBr 3 , with special emphasis on different classes of fabrication methods and thin-film characteristics. So finally, the conclusion and prospects in this field are discussed in detail. It is anticipated that the HPSC thin films will lead to a compelling future for the rising electronic applications.

MAPbI3↗
DOE OSTI2025

Spatial variation of the low-temperature micro-photoluminescence of THM-grown CdZnTeSe

The quaternary compound CdZnTeSe (CZTS) has emerged as a next-generation detector material. Unlike CdZnTe (CZT), CZTS has the distinct advantages of little or no sub-grain boundary networks and a much lower concentration of Te inclusions, plus better compositional homogeneity. Thus, the material is expected to offer better spatial charge-transport homogeneity compared to CZT. However, an inhomogeneous distribution of point defects in both CZT and CZTS, such as Cd vacancies and residual impurities, can impose additional spatial inhomogeneity of the resistivity, carrier mobilities, and carrier lifetimes of the material. To investigate the spatial distribution of such defects in CZTS, low-temperature photoluminescence (PL) spectroscopic studies were performed at different positions along a single crystalline CZTS sample surface, which was grown by the traveling heater method (THM). In conclusion, the intensity variation of the PL emission of excitons bound to a neutral acceptor defect (A 0 , X), which is likely dominated by an acceptor like Cu-related level, with respect to the PL emission line from a neutral donor-bound exciton (D 0 , X) exhibited significant spatial variation, while the peak energy positions were approximately uniform due to the high compositional and bandgap homogeneity of the material.

II-VI semiconductor↗
DOE OSTI2024

High Field Transport in (Ultra) Wide Bandgap Semiconductors: Diamond Versus Cubic GaN

We provide an analysis of nonlinear transport in diamond and cubic GaN (c-GaN) with emphasis on the different types of optical phonon scattering [i.e., optical deformation potential (ODP) scattering versus polar optic phonon (POP) scattering] limiting the carrier velocity. Both types of carrier mobilities and carrier saturation (peak) velocities in diamond and c-GaN as functions of different doping types and concentrations are obtained by directly solving the Boltzmann equation. Our model indicates that the nonrandomizing nature of POP scattering causes carrier temperature cooling, resulting in higher carrier drift velocity than with ODP scattering. This effect, in addition to the small carrier effective masses and large optical phonon energies, is responsible for the higher peak velocities in c-GaN, compared to carrier drift velocity in diamond.

42 ENGINEERING↗
DOE OSTI2025

Layer Number Dependence of Chirality and Spin Polarized Lifetime in Chiral 2D Halide Perovskites

Chiral metal halide perovskite semiconductors (CMHS) are fascinating semiconductors with unique chiroptical properties and spin-polarized charge transport. Achieving long spin lifetimes and high carrier mobility concurrently is essential to realize the true potential of CMHS in manipulating charge, spin, and light. While conventional monolayer n = 1 CMHS possess appreciable anisotropy factors of circular dichroism (g CD ) and photoluminescence (g lum ), imparting chirality to quasi-2D CMHS (n > 1) with enhanced carrier mobilities is underexplored. Herein, we systematically investigate the layer number (n-value) dependence and emergent trade-offs in chiroptical properties, spin-relaxation times, and carrier mobilities in chiral quasi-2D (R/S-MPEA) 2 MA n-1 Pb n I 3n+1 single crystals and thin films (R/S-MPEA: R/S-β-methylphenylethylammonium; MA: methylammonium; n = 1–3). Films with n = 2 exhibited the highest g CD of 8 × 10 –3 , an order of magnitude larger than their n = 1 and n = 3 counterparts. On the other hand, n = 3 films demonstrated enhanced spin lifetimes up to 15 ps along with increased carrier mobility up to 11.6 cm 2 V –1 s –1 . As a result, photodiode-type photodetectors based on n = 3 CMHS reveal high specific detectivity and superior discrimination of circularly polarized light, outperforming n = 1 and 2. These findings highlight the potential of quasi-2D CMHS as tunable, high-performance platforms with longer spin lifetime and diffusion length, enabling new functionalities.

14 SOLAR ENERGY↗
DOE OSTI2025

Models and Measurements Quantify Photon Recycling, Charge-Carrier Diffusion and Photon Scattering Contributions to Photoluminescence in InP Nanowire Arrays

Nanowire arrays present many unique advantages for solar-to-chemical energy conversion. One possible advantage is that photon recycling between neighboring nanowires has the potential to increase solar energy conversion efficiencies. Here, in this work, we explore three underlying mechanisms of optical and electronic coupling between neighboring nanowires─incident photon scattering, photon recycling, and charge-carrier transport from the photoexcited nanowire to the neighboring nanowire via the underlying substrate─using single nanowire-level microscopy and spectroscopy measurements. We present a comprehensive analysis of light absorption and emission of a single nanowire at open circuit, and subsequent re-absorption and re-emission by a neighboring nanowire. We developed a novel correlated single nanowire microspectroscopy and widefield imaging methodology to spatially resolve photon communication pathways between neighboring nanowires and selectively image re-emitted and reflected photons. We developed unique multiphysics models to couple wave optics and semiconductor photophysics to especially isolate contributions from photon recycling and electronic transport to photon emission from neighboring nanowires. By systematically varying the morphologies of the nanowires modeled, we identified pathways to maximize photon recycling between neighboring nanowires. We concluded that the measured photoluminescence is more strongly influenced by the diffusion of charge carriers as compared to photon recycling in materials with moderate-to-large charge-carrier mobilities (>10 cm 2 V –1 s –1 ), and that photon recycling dictates photoluminescence intensity only when the charge-carrier mobility is low (<1 cm 2 V –1 s –1 ). The experimental and simulation platforms developed herein for photon management strategies can be leveraged by the semiconductor photocatalysis community to enhance solar-to-chemical conversion efficiencies in semiconductor nanowire arrays.

25 ENERGY STORAGE↗
NASA NTRS1986

Measurement of minority carrier lifetime, mobility and diffusion length in heavily doped silicon

Carrier transport and recombination parameters in heavily doped silicon were examined. Data were presented for carrier diffusivity in both p- and n-type heavily doped silicon covering a broad range of doping concentrations from 10 to the 15th power to 10 to the 20th power atoms/cu cm. One of the highlights of the results showed that minority carrier diffusivities are higher by a factor of 2 in silicon compared to majority carrier diffusivities.

Swirhun, S. E.↗
DOE OSTI2023

Tuning the Mobility of Indacenodithiophene-Based Conjugated Polymers via Coplanar Backbone Engineering

Conjugated polymers based on indacenodithiophene-benzothiadiazole (IDT-BT) have attracted great interest due to their high charge carrier mobilities while being low crystallinity (i.e. near-amorphous.) They represent a promising design strategy to achieve both excellent stretchability and electrical performance. Here, we describe an approach on structural modifications of IDT-BT, namely by introducing non-covalent interactions and substituting building blocks to promote extended coplanar backbones. We systematically investigated the effects of structural modifications on backbone conformation, polymer aggregations, and charge carrier mobilities. Among the investigated polymers, the fluorinated derivative IDT-FBT demonstrated the highest charge carrier mobility of 5.19 cm 2 /Vs, along with low activation energy and Urbach energy indicating its low energy disorder level. The high mobility was attributed to the higher backbone planarity reinforced by S···F and H···F non-covalent interactions and improved interchain interactions through strong aggregation. In conclusion, our findings indicate that increasing backbone coplanarity may further improve mobility in low crystallinity conjugated polymers.

36 MATERIALS SCIENCE↗
NASA NTRS2010

Fully Printed High-Frequency Phased-Array Antenna on Flexible Substrate

To address the issues of flexible electronics needed for surface-to-surface, surface-to-orbit, and back-to-Earth communications necessary for manned exploration of the Moon, Mars, and beyond, a room-temperature printing process has been developed to create active, phased-array antennas (PAAs) on a flexible Kapton substrate. Field effect transistors (FETs) based on carbon nanotubes (CNTs), with many unique physical properties, were successfully proven feasible for phased-array antenna systems. The carrier mobility of an individual CNT is estimated to be at least 100,000 sq cm/V(dot)s. The CNT network in solution has carrier mobility as high as 46,770 sq cm/V(dot)s, and has a large current-density carrying capacity of approx. 1,000 mA/sq cm , which corresponds to a high carrying power of over 2,000 mW/ sq cm. Such high carrier mobility, and large current carrying capacity, allows the achievement of high-speed (>100 GHz), high-power, flexible electronic circuits that can be monolithically integrated on NASA s active phasedarray antennas for various applications, such as pressurized rovers, pressurized habitats, and spacesuits, as well as for locating beacon towers for lunar surface navigation, which will likely be performed at S-band and attached to a mobile astronaut. A fully printed 2-bit 2-element phasedarray antenna (PAA) working at 5.6 GHz, incorporating the CNT FETs as phase shifters, is demonstrated. The PAA is printed out at room temperature on 100-mm thick Kapton substrate. Four CNT FETs are printed together with microstrip time delay lines to function as a 2-bit phase shifter. The FET switch exhibits a switching speed of 0.2 ns, and works well for a 5.6-GHz RF signal. The operating frequency is measured to be 5.6 GHz, versus the state-of-the-art flexible FET operating frequency of 52 MHz. The source-drain current density is measured to be over 1,000 mA/sq cm, while the conventional organic FETs, and single carbon nanotube-based FETs, are typically in the mA to mA/sq cm range. The switching voltage used is 1.8 V, while the state-of-the-art flexible FET has a gate voltage around 50 V. The gate voltage can effectively control the source-drain current with an ON-OFF ratio of over 1,000 obtained at a low Vds bias of 1.8 V. The azimuth steering angles of PAA are measured at 0deg, -14.5deg, -30deg, and 48.6deg. The measured far-field patterns agree well with simulation results. The efficiency of the 2-bit 2-element PAA is measured to be 39 percent, including the loss of transmission line, FET switch, and coupling loss of RF probes. With further optimization, the efficiency is expected to be around 50-60 percent.

Chen, Yihong↗
DOE OSTI2022

Charge Transport in Twisted Organic Semiconductor Crystals of Modulated Pitch

Many molecular crystals (approximately one third) grow as twisted, helicoidal ribbons from the melt, and this preponderance is even higher in restricted classes of materials, for instance, charge-transfer complexes. Previously, twisted crystallites of such complexes present an increase in carrier mobilities. In this paper, the effect of twisting on charge mobility is better analyzed for a monocomponent organic semiconductor, 2,5-bis(3-dodecyl-2-thienyl)-thiazolo[5,4-d]thiazole (BDT), that forms twisted crystals with varied helicoidal pitches and makes possible a correlation of twist strength with carrier mobility. Films are analyzed by X-ray scattering and Mueller matrix polarimetry to characterize the microscale organization of the polycrystalline ensembles. Carrier mobilities of organic field-effect transistors are five times higher when the crystals are grown with the smallest pitches (most twisted), compared to those with the largest pitches, along the fiber elongation direction. A tenfold increase is observed along the perpendicular direction. Simulation of electrical potential based on scanning electron microscopy images and density functional theory suggests that the twisting-enhanced mobility is mainly controlled by the fiber organization in the film. A greater number of tightly packed twisted fibers separated by numerous smaller gaps permit better charge transport over the film surface compared to fewer big crystallites separated by larger gaps.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Ultrafast terahertz spectroscopy provides insight into charge transfer efficiency and dynamics in artificial photosynthesis

Terahertz (THz) spectroscopy provides a noncontact method to measure the ultrafast dynamics and photoconductivity of mobile carriers in semiconducting materials. This has proven useful in studying artificial photosynthesis devices which use semiconductor photoelectrodes. In this work, we present a brief introduction to optical-pump THz-probe (OPTP) spectroscopy, a technique that provides unique and useful insight into interfacial electron transfer (from the surface-attached dye to the conduction band of the semiconductor) in dye-sensitized photoelectrochemical cells. Compared with more familiar methods like visible transient absorption spectroscopy, OPTP spectroscopy stands out in offering both sub-picosecond time resolution as well as sensitivity to mobile carriers (electrons and holes) in the semiconductor portion of artificial photosynthesis devices. The mobile carriers are crucial to device performance as only they pass to the other half cell to complete the reaction. In order to highlight these advantages and illustrate the types of questions OPTP spectroscopy can address, we discuss three case studies. In the first, OPTP spectroscopy is used to measure the injection rates from a set of six different dyes, revealing the effect of the energetics and lifetimes of the dye excited states on interfacial electron transfer. The subsequent case studies investigate the influence of varying the moieties which bind to the surface (anchors), as well as the moieties that connect the chromophore with these anchors (linkers). OPTP spectroscopy was used to measure the interfacial electron transfer rate as these moieties were varied.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2021

Enhanced charge carrier lifetime and mobility as a result of Rb and Cs incorporation in hybrid perovskite

Alkali addition in organic–inorganic perovskite has become the standard recipe for achieving solar cells with efficiencies exceeding 20%, but the mechanism is not well understood. We use non-contact carrier lifetime measurements, mobility measurements, and synchrotron-based x-ray characterization techniques to show that there is a unique benefit to adding hybrid perovskite samples with Rb and Cs simultaneously. When either Rb or Cs is added, charge carrier mobility increases with alkali concentration. Charge carrier lifetime benefits from alkali incorporation as well, but is optimized with only moderate concentration at 1%. When both Rb and Cs are introduced, however, the high mobility is maintained and the charge carrier lifetime increases considerably. Our results show that when incorporated alone, Rb and Cs have very similar roles in a perovskite crystal, but when co-added, halide distribution becomes homogenized correlating with improved charge transport properties.

Erodici, Matthew P.↗
DOE OSTI2021

CO 2 -selective membranes containing amino acid salts for CO 2 /N 2 separation

In this paper, facilitated transport membranes comprising polyvinylamine (PVAm) as fixed carrier and different amino acid salts (AAS) as mobile carriers were synthesized for post-combustion capture. The AAS carriers were prepared by deprotonating alanine (Ala), lysine (Lys), and proline (Pro) with 2-(1-piperazinyl)ethylamine (PZEA). CO 2 separation performances of the membranes with these AAS carriers were compared, and the AAS effectiveness to facilitate transport of CO 2 was in the order of PZEA-Pro > PZEA-Lys > PZEA-Ala. Here, the membrane comprising 35 wt.% PVAm and 65 wt.% PZEA-Pro at 57 °C rendered a promising CO 2 permeance of 936 GPU and a CO 2 /N 2 mixed gas selectivity of 193. When the PVAm was reduced to 15 wt.%, i.e., its 20 wt.% was replaced by the mobile carrier of PZEA-Sar (sarcosinate), the permeance further improved to 947 GPU with a remarkable CO 2 /N 2 selectivity of 210. Moreover, thermal gravimetric analysis showed a good thermal stability of the membrane, and membrane stability testing also gave stable transport performance. Furthermore, spectroscopic ellipsometry analysis exhibited a uniform membrane selective layer and an excellent agreement on the membrane thickness of ca. 170 nm measured independently by SEM. In addition, the membranes presented in this paper surpassed both the Robeson upper bound and the modified upper bound, indicating a great potential for CO 2 capture.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗