Search NASA⌕ Search

SEARCH · Search NASA

Results for “Charged clusters”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3

Optimization of Ag Electrocatalyst Performance for CO2 to CO Conversion: Pairing Atomic Simulations with Experiments

Density-functional theory- based calculations that complement our series of experimental efforts on optimizing Ag electrocatalyst performance for CO2 to CO conversion were presented. Three key findings are drawn out from the combined UHV surface science, STM and electrochemical measurements: (1) Using a series of Ag nanoparticles with 2-6 nm average diameters, CO2 reduction reaction (CO2RR) activity increases, with particle between 2 nm and ∼4 nm demonstrating the highest combination of activity and selectivity; (2) Electronic metal−support interactions (EMSIs) between Ag and C dramatically improve CO2RR performance as evidenced by a scaling relationship between particle size and the relative Ag−C EMSIs strength, which improves the CO2-to-CO Faradaic efficiency of sub-2 nm Ag particles from 2 to ∼100% and increases the CO turnover frequency ∼15-fold compared with similarly sized bare Ag particles; (3) The performance Ag electrocatalysts is improved when supported on S-doped C materials. Computational modeling of 1−10 nm Ag particles predicts a nearly identical size-dependent trend with maximum CO2RR activity predicted for 3.7nm particles. The calculations support the promotional effect of C materials, showing a large charge transfer of 1.02 e from Ag clusters to defective C and a 0.41 eV less endergonic step of forming COOH intermediate on Ag/defective-C compared to the Ag/C system. Calculations indicate a more favorable energetic pathway of CO2-to-CO at the C-S-Ag interface, consistent with experiments.

CO2 utilization↗

Light-Induced Charge Separation in Photosystem I from Different Biological Species Characterized by Multifrequency Electron Paramagnetic Resonance Spectroscopy

Photosystem I (PSI) serves as a model system for studying fundamental processes such as electron transfer (ET) and energy conversion, which are not only central to photosynthesis but also have broader implications for bioenergy production and biomimetic device design. In this study, we employed electron paramagnetic resonance (EPR) spectroscopy to investigate key light-induced charge separation steps in PSI isolated from several green algal and cyanobacterial species. Following photoexcitation, rapid sequential ET occurs through either of two quasi-symmetric branches of donor/acceptor cofactors embedded within the protein core, termed the A and B branches. Using high-frequency (130 GHz) time-resolved EPR (TR-EPR) and deuteration techniques to enhance spectral resolution, we observed that at low temperatures prokaryotic PSI exhibits reversible ET in the A branch and irreversible ET in the B branch, while PSI from eukaryotic counterparts displays either reversible ET in both branches or exclusively in the B branch. Furthermore, we observed a notable correlation between low-temperature charge separation to the terminal [4Fe-4S] clusters of PSI, termed F A and F B , as reflected in the measured F A /F B ratio. These findings enhance our understanding of the mechanistic diversity of PSI’s ET across different species and underscore the importance of experimental design in resolving these differences. Though further research is necessary to elucidate the underlying mechanisms and the evolutionary significance of these variations in PSI charge separation, this study sets the stage for future investigations into the complex interplay between protein structure, ET pathways, and the environmental adaptations of photosynthetic organisms.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Recent advancements in atomic many-body methods for high-precision studies of isotope shifts

The development of atomic many-body methods, capable of incorporating electron correlation effects accurately, is required for isotope shift (IS) studies. In combination with precise measurements, such calculations help to extract nuclear charge radii differences, and to probe for signatures of physics beyond the Standard Model of particle physics. Here, we review here a few recently-developed methods in the relativistic many-body perturbation theory (RMBPT) and relativistic coupled-cluster (RCC) theory frameworks for calculations of IS factors in the highly charged ions (HCIs), and neutral or singly-charged ions, respectively. The results are presented for a wide range of atomic systems in order to demonstrate the interplay between quantum electrodynamics (QED) and electron correlation effects. In view of this, we start our discussions with the RMBPT calculations for a few HCIs by rigorously treating QED effects; then we outline methods to calculate IS factors in the one-valence atomic systems using two formulations of the RCC approach. Then we present calculations for two valence atomic systems, by employing the Fock-space RCC methods. For completeness, we briefly discuss theoretical input required for the upcoming experiments, their possibilities to probe nuclear properties and implications to fundamental physics studies.

QED effects↗

Morphology Effects on Free Energies of Proton-Coupled Electron Transfer in Polyoxotungstates

Polyoxotungstates have previously been established to facilitate the hydrogenation of small molecule substrates via hydrogen atom transfer from reactive hydroxyl groups formed at the assembly surface. Understanding structure−function relationships that dictate the thermochemistry and kinetics of protoncoupled electron transfer is key to controlling this chemistry. In this work, we combine comprehensive electrochemical experiments and density functional theory calculations to address how different polyoxotungstate morphologies, specifically W 6 O 19 −2 , W 10 O 32 −4 , SiW 12 O 40 −4 , and P 2 W 18 O 62 −6 , affect the bond dissociation free energies of surface hydroxides (BDFE(O−H)) formed upon reduction of the assembly in acidic media. Our results reveal increasing hydroxide bond strengths with increasing cluster size, and that anisotropic cluster geometries result in substantial thermodynamic differentiation of H-binding sites. We demonstrate an excellent agreement between theory and experiments on the reported BDFE(O−H) values and, importantly, we elucidate how cluster size and shape affect electronic properties (local charges and frontier molecular orbitals), giving rise to sites with increased preference for hydrogen binding, demonstrated in higher BDFE(O−H). Overall, this work aids the understanding and design of polyoxometalates exhibiting surface sites with tailored interaction strengths.

anions↗

Conductive Organometallic Polymers from Soluble Superatom Ions

Superatomic crystals comprising ligand-capped, metal chalcogenide clusters and fullerenes are modular materials that exhibit enhanced electronic, magnetic, and thermal conductivity properties. We find that neutral, M 4 S 4 (M = Fe, Co) clusters stabilized with N -heterocyclic carbenes (NHCs) can transfer charge to C 60 fullerene to form binary superatomic crystals. Notably, these compounds are soluble in various organic solvents, allowing their properties to be investigated in solution, unlike traditional fullerene-based superatomic crystals. The ion pairs can be further assembled into organometallic polymers using Janus-bis(NHCs) to cross-link the oxidized M 4 S 4 units. We show that the superatomic polymers are more conductive than both the precursor superatomic crystals and the polymers containing only neutral M 4 S 4 clusters. Similar conductivity values can be obtained when neutral M 4 S 4 –NHC polymers are doped with solutions of C 60 fullerene. These findings demonstrate that next generation superatomic materials can be prepared via the combination of charge transfer and polymerization with appropriate cross-linking agents.

carbon nanomaterials↗

Density Functional Theory Study of Iron–Oxygen Divacancies in Magnetite (Fe 3 O 4 ) and Hematite (Fe 2 O 3 )

Density functional theory (DFT) calculations are employed to investigate the formation energies, charge redistribution, and binding energies of iron–oxygen divacancies in magnetite (Fe 3 O 4 ) and hematite (Fe 2 O 3 ). For magnetite, we focus on the low-temperature phase to explore variations with local environments. Building on previous DFT calculations of the variations in formation energies for oxygen vacancies with local charge and spin order in magnetite, we extend this analysis to include octahedral iron vacancies before analyzing the iron–oxygen divacancies. We also assessed the relative stability of iron–oxygen divacancies by comparing their formation energies with those of individual vacancies. Our findings reveal a significant energetic driving force for the formation of divacancy clusters, particularly in magnetite, where divacancies in the +1 charge state exhibit formation energies comparable to those of neutral iron vacancies under oxidizing conditions. In hematite, the results indicate a strong tendency for oxygen vacancies to bind to iron vacancies. These results highlight the significance of iron–oxygen vacancy complexes in the transport properties of iron oxides, with particular relevance to diffusion mechanisms under irradiation conditions.

36 MATERIALS SCIENCE↗

Enhancing charge ratio sensitivity to hadronization effects via jet selections on resolved SoftDrop splitting

The study of quantum chromodynamics (QCD) at ultrarelativistic energies can be performed in a controlled environment through lepton-hadron deep inelastic scatterings. In such collisions, the high-energy partonic emissions that follow from the ejected hard partons are accurately described by perturbative QCD. However, the lower energy scales at which quarks and gluons experience color confinement, i.e., hadronization mechanism, fall outside the validity regions for perturbative calculations, requiring phenomenological models tuned to data to describe it. As such, hadronization physics cannot be currently derived from first principles alone. Monte Carlo event generators are useful tools to describe these processes as they simulate both the perturbative and the nonperturbative interactions, with model-dependent energy scales that control parton dynamics. This work employs jets—experimental reconstructions of final-state particles likely to have a common partonic origin—to inspect this transition further. Although originally proposed to circumvent hadronization effects, we show that jets can be utilized as probes of nonperturbative phenomena via their substructure. The charge correlation ratio was recently shown to be sensitive to hadronization effects. Our work further improves this sensitivity to nonperturbative scales by introducing a new selection based on the relative placement of the within the clustering tree, defined as the unclustering that resolves the jet’s leading charged particles. Published by the American Physical Society 2025

Apolinário, Liliana (ORCID:0000000335009681)↗

Influence of counterion substitution on the properties of imidazolium-based ionic liquid clusters

Due to their unique physiochemical properties that may be tailored for specific purposes, ionic liquids (ILs) have been investigated for various applications, including chemical separations, catalysis, energy storage, and space propulsion. The different cations and anions comprising ILs may be selected to optimize a range of desired properties, such as thermal stability, ionic conductivity, and volatility, leading to the designation of certain ILs as designer “green” solvents. The effect of counterions on the properties of ILs is of both fundamental scientific interest and technological importance. Herein, we report a systematic experimental and theoretical investigation of the size, charge, stability toward dissociation, and geometric/electronic structure of 1-ethyl-3-methyl imidazolium (EMIM)-based IL clusters containing two different atomic counterions (i.e., bromide [Br − ] and iodide [I − ]). This work extends our studies of EMIM + cations with atomic chloride (Cl − ) and molecular tetrafluoroborate (BF 4 − ) anions reported previously by Baxter et al. [Chem. Mater. 34, 2612 (2022)] and Zhang et al . [J. Phys. Chem. Lett. 11, 6844 (2020)], respectively. Distributions of anionic IL clusters were generated in the gas phase using electrospray ionization and characterized by high mass resolution mass spectrometry, energy-resolved collision-induced dissociation, and negative ion photoelectron spectroscopy experiments. The experimental results reveal anion-dependent trends in the size distribution, relative abundance, ionic charge state, stability toward dissociation, and electron binding energies of the IL clusters. Complementary global optimization theory provides molecular-level insights into the bonding and electronic structure of a selected subset of clusters, including their low energy structures and electrostatic potential maps, and how these fundamental characteristics are influenced by anion substitution. Collectively, our findings demonstrate how the fundamental properties of ILs, which determine their suitability for many applications, may be tuned by substituting counterions. These observations are critical in the sub-nanometer cluster size regime where phenomena do not scale predictably to the bulk phase, and each atom counts toward determining behavior.

cluster↗

Optical properties of a diamond NV color center from capped embedded multiconfigurational correlated wavefunction theory

Diamond defects are among the most promising qubits. Modeling their properties through accurate quantum mechanical simulations can further their development into robust units of information. We use the recently developed capped density functional embedding theory (capped-DFET) with the multiconfigurational n-electron valence second-order perturbation theory to characterize the electronic excitation energies for different spin manifolds of the well-characterized negatively charged substitutional N defect adjacent to a vacancy (V C ) in diamond (N C V C − ). We successfully reproduce vertical excitation energies for both triplet and singlet states of N C V C − with errors < 0.1 eV. Unlike other embedding methods, capped-DFET exhibits robust predictions that are approximately independent of the embedded cluster size: it only requires a cluster to contain the defect atoms and their nearest neighbors (as small as a 40-atom capped cluster). Furthermore, our method is free from slowly converging Coulomb interactions between charged defects, and thus also only weakly dependent on supercell size.

Chemistry↗

Group-Additivity–Embedded Multiscale Modeling for Electric Field-Enhanced Nanocatalysis

Elucidating structure-performance relationships remains a central challenge in field-enhanced catalysis, where nanoparticles exhibit nonuniform surface sites with site-dependent responses to electric fields. Low-coordination sites (edges, corners, and tips) are particularly electric field-sensitive (EF), leading to nonuniform charge distribution, adsorption energies, and catalytic activity. Here, using ammonia decomposition on a ruthenium cluster as a model system, we develop a transferable multiscale framework integrating density functional theory, group additivity (GA), Brønsted-Evans-Polanyi scaling, and microkinetic modeling to predict EF-dependent activity across nonuniform cluster sites. Across sites and fields, the nitrogen adsorption energy (E N ) emerges as the governing descriptor, yielding robust volcano relationships whose optimum shifts systematically with field: negative fields strengthen N binding via electron accumulation, while positive fields weaken N binding via charge depletion, moving the optimal E N toward weaker binding. Microkinetic analysis shows that N≡N bond formation remains the key kinetic bottleneck over most conditions; positive fields lower the effective barrier and, critically, increase the fraction of near-optimal active sites, leading to a net enhancement in overall activity relative to zero-field and negative-field cases. By capturing EF- and site-dependent energetics with high accuracy and low computational cost, this GA-embedded multi-scale simulation workflow provides a physically interpretable route to predict and design field-enhanced nanocatalysis.

ammonia decomposition↗

Topological phase transition without single particle gap closing in strongly correlated systems

Here, in this study, we show two models where changing topology does not necessarily close the bulk insulating charge gap as demanded in the standard noninteracting picture. From extensive determinantal and dynamical cluster quantum Monte Carlo simulations of the half-filled and quarter-filled Kane-Mele-Hubbard model, we show that, for sufficiently strong interactions at either half- or quarter-filling, a transition between topological and trivial insulators occurs without the closing of a charge gap. To shed light on this behavior, we illustrate that an exactly solvable model reveals that while the single-particle gap remains, the many-body gap does, in fact, close. These two gaps are the same in the noninteracting system but depart from each other as the interaction turns on. We purport that for interacting systems, the proper probe of topological phase transitions is the closing of the many-body rather than the single-particle gap.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Using Density-Corrected DFT to Understand Density-Driven and Functional-Dependent Errors in Ab Initio Simulations of the Hydrated Electron

The hydrated electron, an excess electron in liquid water, plays a crucial role in a plethora of chemical processes, motivating extensive research efforts to characterize its structure, dynamics, and reactivity in solution. Recent theoretical approaches to understanding this intriguing object have involved ab initio simulations based on density functional theory (DFT). Although DFT allows for the study of hydrated electron reactivity and quantum mechanical behavior, it is well-known that anionic systems can suffer from significant density-driven errors (DDEs). Density-corrected DFT (DC-DFT) provides a framework to mitigate such errors; the method reduces DDEs by replacing the self-consistent (SC) density associated with a given density functional with the Hartree–Fock (HF) density. Since HF densities tend to be more localized than DFT SC densities, the DC-DFT scheme significantly improves errors in calculations where the SC density is spuriously delocalized. Here, we investigate how the use of density correction affects the calculated properties of the DFT-simulated (PBEh) hydrated electron, a particularly challenging diffuse anionic system to simulate. First, we analyze charge delocalization in a system consisting of a model octahedral hydrated electron water cluster (the so-called Kevan structure) along with a spatially separated sulfur atom. We show that the use of density correction indeed reduces DDEs in comparison to a standard DFT global hybrid functional. We then propagate molecular dynamics trajectories of the hydrated electron using DC-DFT, where we find that DC further localizes electron density in the cavity region, a signature of reduced charge delocalization. Unfortunately, the decreased radius of gyration of the spin density and corresponding tightening of the local solvation structure from density correction causes predicted observables to deviate further from experimental measurements than when density correction is not employed. Here, we argue that DC’s worse agreement with experiment results from the removal of a fortuitous cancellation of errors that is intrinsic to the PBEh functional. This indicates that the difficulties with DFT to simulate hydrated electrons are primarily due to the inherent approximations in DFT rather than to density-driven errors.

Density functional theory↗

Unveiling the structural transformations in glassy solid electrolyte adapted to high-stress cycles

Brittleness of glass–ceramic and ceramic ion conductors is considered as a main roadblock for their implementation as electrolytes in solid-state batteries where the fractures often occur due to the pressure exerted by metallic lithium. In this regard, nano- and micro-scale ductility of the solid electrolyte allows reducing such pressure without formation of cracks. Among different types of solid state ion conductors, phosphate invert glasses seem to be promising in achieving such ductility. We report the mechanical behavior of lithium phosphorous oxynitride (LiPON) invert glass probed by static and cyclic nanoindentation. Repeated application of high intensity stress results in densification and shear deformation of material allowing LiPON to accommodate the ~ 22% nominal strain imposed by the nanoindenter without cracking. Ability to do this under repeated loading indicates robustness of LiPON when used in lithium metal batteries under cyclic charge and discharge. Using Raman spectroscopy with unsupervised K-means clustering we reveal pressure-induced formation of P 2 O 7 units which migrate to the periphery of the residual hardness impressions with cycling resulting in surface morphology of LiPON superficially similar to that of deformed bulk metallic glass.

36 MATERIALS SCIENCE↗

Photoelectron Spectroscopy and Computational Study on Microsolvated [B 10 H 10 ] 2– Clusters and Comparisons to Their [B 12 H 12 ] 2– Analogues

Microhydrated closo-Boranes have attracted great interests due to their superchaotropic activity related to well-known Hofmeister effect and important applications in biomedical and battery fields. In this work, we report a combined negative ion photoelectron spectroscopy and quantum chemical investigation on hydrated closo-decaborate clusters [B 10 H 10 ] 2- ·nH 2 O (n = 1 – 7) with a direct comparison to their analogues [B 12 H 12 ] 2- ·nH 2 O and free water clusters. A single H 2 O molecule is found sufficient to stabilize the intrinsically unstable [B 10 H 10 ] 2- dianion. The first two water molecules strongly interact with the solute forming B-H···H-O dihydrogen bonds while additional water molecules show substantially reduced binding energies. Unlike [B 12 H 12 ] 2- ·nH 2 O possessing highly structured water network with the attached H 2 O molecules arranged in a unified pattern by maximizing B-H···H-O dihydrogen bonding, distinct structural arrangements of the water clusters within [B 10 H 10 ] 2– ·nH 2 O are achieved with the water cluster networks from trimer to heptamer resembling free water clusters. Such a distinct difference arises from the variations in size, symmetry, and charge distributions between these two dianions. Finally, the present finding again confirms the structural diversity of hydrogen-bonding networks in microhydrated closo-boranes and enrich our understanding of aqueous borate chemistry.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Microcanonical Kinetics of Water-Mediated Proton Transfer in 4ABAH + ·(H 2 O) n = 4–6 Clusters (ABA = Aminobenzoic Acid): A Model System for Size-Dependent Relaxation to Ergodic Behavior

Here, we leverage the unique properties of the 4ABAH + · (H 2 O) n clusters (ABA = 4-aminobenzoic acid, n = 4−6) to quantitatively address how a finite, isolated system evolves into an ergodic condition starting from localized arrangements in configuration space. This system adopts two distinct structural isomers in which water molecules cluster around the cationic centers of its two protomers with widely separated positive charge centers. These isomers arise from excess proton attachment to either the acid (O) or amino (N) group on opposite sides of the benzene ring. Both forms are captured and kinetically trapped using cryogenic ion methods and then selectively vibrationally excited through their mutually exclusive IR bands involving NH and OH stretching fundamentals. Because the IR excitation lies below the water binding energy, the system can evolve to explore slow, rare events that lead to the interconversion between the two isomers. The rates of these intracluster reactions are determined by using a pump−probe scheme involving ∼5 ns IR pump and UV probe lasers. The rates occur on the microsecond time scale, leading to steady state populations of the isomers, thus revealing the cluster size-dependent fractionation between the two species at microcanonical equilibrium. The steady state distributions are correlated with the expected trend in the cluster size-dependent reaction energetics, which are in turn consistent with changes in the relative densities of states of the two species. These results thus provide an unusually clear example in which complex, protic-solvent-mediated chemical transformations are captured within a finite system at a precisely determined internal energy.

Rana, Abhijit [Yale Univ., New Haven, CT (United S↗

Electronic Spin Relaxation and Clustering in High-Pressure High-Temperature Synthesized Microcrystalline Diamond Particles with Reduced Nitrogen Content

The negatively charged nitrogen-vacancy (NV – ) color center in diamonds is widely studied because of numerous applications of this unique quantum system in sensing and quantum information sciences. While substitutional nitrogen is required to form the NV – centers in diamond, it also yields other paramagnetic defects─primarily the neutrally charged substitutional nitrogen centers (P1)─that decrease NV – spin coherence, which in turn degrades performance in applications. Herein, we investigate high-pressure high-temperature synthesized diamond microparticles (ca. 140–185 μm) having lower─ranging from 3 to 38 ppm─than the typical nitrogen content of type 1b diamond ( ca. 100 ppm and higher) typically used for the production of fluorescent diamond particles with NV – centers. A suite of electron paramagnetic resonance, optically detected magnetic resonance, and nuclear magnetic resonance methods are used to characterize spin properties of P1 and NV – centers in the particles. Upon decreasing the nitrogen content from 29 to 3 ppm, the ensemble NV – T 2 relaxation time increased by about 3-fold as measured directly in the Hahn Echo experiment at magnetic field of 1.2 T. Analysis of electronic relaxation of P1 centers revealed the existence of at least two distinct populations of P1 centers, consisting of fast and slower relaxing spins and allowed for an estimation of local concentrations. Even with <10 ppm nitrogen contents, the analysis indicated a highly heterogeneous distribution of P1 centers, suggesting the possibility of P1 spin clustering even at low nitrogen concentrations. The combined data demonstrate that the particles prepared from HPHT diamond with a low nitrogen content offer improved spin properties that are beneficial for NV – sensing applications.

Carbon↗

Evolution of size-selected Pt cluster catalysts on prototypical oxide supports

The current quest for new pathways into sustainable, efficient and durable energy conversion technologies makes the used for a fundamental understanding of the atomic-scale phenomena underlying catalytic processes ever more pressing. In this context, characterizing catalyst particles in situ provides valuable information about the evolution of their composition, structure, oxidation state and charge state during an ongoing process. To disentangle the influence of individual parameters – temperature, pressure, gas composition, cluster size, as well as support acidity, redox state and defect density – it is crucial to control them precisely and separately in experiments. At the example of size-selected Pt n clusters – i.e. sub-nm particles defined to the exact number of atoms – on flat oxide supports, we follow their rich evolution phenomena via (synchrotron-based) X-ray photoelectron spectroscopy (XPS) and scanning tunnelling microscopy (STM) during temperature ramps and in various gas environments. Here, we present our experience with these highly defined, yet complicated-to-create samples in ultra-high vacuum (UHV) and at mbar pressures. We discuss their stability during transport to synchrotrons and under reaction conditions on three prototypical oxide supports and show the various phenomena that can be disentangled. Ptn clusters on the non-reducible silicon dioxide, SiO 2 , remain size-selected and show remarkable stability. Doping strongly influences the size-dependent binding energy shifts and changes the Pt response to oxidative and reaction conditions, which we attribute to different cluster geometries: p-type doping leads to wetting, enhanced sinter resistance and a diminished response to oxidative environments, compared to clusters on n-type doped samples. We compare the system with our previous findings of a similar change in dimensionality for Pt 20 clusters on the reducible ceria, CeO 2 (111), support, induced by modulation of its O vacancy density. The Pt n /CeO 2 system is particularly interesting for strategies to stabilize and redisperse Pt clusters dynamically. Finally, we study the evolution of Pt n clusters on another reducible oxide support, magnetite, Fe 3 O 4 (001), in 0.1 mbar alternating redox conditions at RT and elevated temperature. In analogy to findings previously reported for Pt/TiO 2 (110), the clusters either become encapsulated by a thin oxide film via strong metal–support interaction (SMSI) or deeply buried in the magnetite. Overall, our approach of following the evolution of size-selected clusters on oxide supports leads to fundamental atomic-scale insights on nano-scale catalyst materials, on our path to sustainable, dynamic and self-repairing catalysts.

Falling, Lorenz J. [Technical Univ. of Munich (Ger↗

Detection efficiency of a water condensation particle counter using electrically neutral sulfuric acid and sulfuric acid-dimethylamine clusters

Recent advances in condensation particle counters (CPCs) have improved the detection of sub-3 nm particles, increasing the accuracy of new particle formation (NPF) measurements. However, the detection efficiencies for neutrally charged, atmospherically relevant, sub-1 nm particles, which are critical for the accurate derivation of atmospheric NPF rates, are currently unknown. Here, this study presents a method to measure the detection efficiency of sulfuric acid and clusters of sulfuric acid and dimethylamine using measured CPC concentrations and modeled cluster distributions at atmospherically relevant concentrations. This study finds that water-based CPCs can measure these clusters at detection efficiencies relevant to NPF studies.

Cheng, Darren [Carnegie Mellon Univ., Pittsburgh, ↗