Search NASA⌕ Search

SEARCH · Search NASA

Results for “Chatter”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3

Spike-Free Adaptive Sliding Mode Control: Application to Permanent Magnet Synchronous Motors

A new methodology for adaptive sliding mode control (ASMC) has been widely used to improve the control performance in various systems. This method exhibits several advantages, including low sliding mode control (SMC) chattering, no knowledge of the system disturbance bound, and no overestimation of the control gain. Despite its advantages, this method can be hampered by the spike phenomenon, slow control gain convergence, and difficulty in achieving optimal performance under varying disturbances. Consequently, this article proposes a spike-free ASMC method with a disturbance observer (DOB) to address these problems. Previous ASMC methods have been analyzed via simulations to verify the aforementioned problems. Here, this analysis highlights the need for disturbance compensation and improvements in the SMC gain adaptation law. Therefore, a DOB is designed to mitigate the spike phenomenon by compensating for disturbances. Subsequently, an SMC gain adaptation law based on disturbance error estimation is designed to eliminate the spike phenomenon completely. The proposed adaptation law makes the SMC gain to converge to a slightly higher value than the disturbance estimation error. Consequently, the proposed method not only eliminates the spike phenomenon, but also ensures optimal performance under varying disturbances. The performance of the proposed method is experimen tally validated through a comparative study.

42 ENGINEERING↗

Methodology to Compare Twitter Reaction Trends between Disinformation Communities, to COVID related Campaign Events at Different Geospatial Granularities

With still ongoing COVID pandemic, there is an immediate need for a deeper understanding of how Twitter discussions (or chatters) in disinformation spreading communities get triggered. More specifically, the value is in monitoring how such trigger events in Twitter discussion do align with the timelines of relevant influencing events in the society (indicated in this work as campaign events). For campaign events in regards to COVID pandemic, we consider both NPI (Nonpharmaceutical Interventions) campaigns and disinformation spreading campaigns together. In this short paper we have presented a novel methodology to quantify, compare and relate two Twitter disinformation communities, in terms of their reaction patterns to the timelines of major campaign events. We have also analyzed these campaigns at their three geospatial granularity contexts: local county, state, and country/ federal. We have conducted a novel dataset collection on campaigns (NPI + Disinformation) at these different geospatial granularities. Then, with collected dataset on Twitter disinformation communities, we have performed a case study to validate our proposed methodology.

De, Debraj↗

DOE Packaging Certification Program Engineering Class Demonstration Tests

On Thursday August 11, 2022, a series of explosive demonstration tests were conducted at the Sandia National Laboratories 9920 Test Complex for the 2022 DOE Packaging Certification Program Explosives Engineering class. Class participants included both SNL engineering student interns as well as SNL and LANL staff members. The test series was designed by the class instructor, W. Gary Rivera Org. 6626, and 9920 site test engineer, Marissa Martinez Org. 6648, with help from Michelle Chatter Org 6514 and Luke Gilbert Org 6815.

36 MATERIALS SCIENCE↗

Modified drill permits one-step drilling operation

Drill with modified cutting faces permits one-step drilling operation without chatter upon contact and premature wear. The modification of the drill, which has the same diameter as that of the desired hole, consists of a groove across the bottom of each of the cutting faces of the drill flutes.

Libertone, C.↗

Low-noise flow valve for air ducts

Valve assembly controls air flow from feeder into main duct, with minimum of turbulence, friction, pressure differential, and noise. Valve consists of damper, deflector, and spring. Streamlining of damper and deflector merges flow smoothly, while spring keeps damper and deflector in contact and eliminates valve chatter and damping vibrations.

Gallo, E. A.↗

Low leak rate poppet-and-seat check valve

Valve leakage due to contaminant entrapment and chattering is effectively minimized by a metallic poppet-and-seat check valve designed for use in extreme environmental and fluid temperature conditions.

Whitten, D. E.↗

Trapping - A control phenomenon of spinning drag-free satellites.

A drag-free satellite contains a proof mass in an internal cavity and is controlled in translation so that it never touches the proof mass. The satellite shields the proof mass from external forces thus allowing the proof mass to follow a drag-free orbit. Spinning the satellite is desirable because it attenuates the effect of proof mass disturbing forces and simplifies the attitude control. The design of a translation controller for a spinning drag-free satellite typically includes a deadspace to eliminate chatter. This design feature and the inability to locate precisely the mass center give rise to a phenomenon called trapping that potentially could waste significant amounts of propellant. A theory is developed and experimentally verified that explains the role of these factors and provides insight into the effect of other control parameters.

Powell, J. D.↗

Dual stage check valve

A dual stage seat valve head arrangement is described which consists of a primary sealing point located between a fixed orifice seat and a valve poppet, and a secondary sealing point between an orifice poppet and a valve poppet. Upstream of the valve orifice is a flexible, convoluted metal diaphragm attached to the orifice poppet. Downstream of the valve orifice, a finger spring exerts a force against the valve poppet, tending to keep the valve in a closed position. The series arrangement of a double seat and poppet is able to tolerate small particle contamination while minimizing chatter by controlling throttling or metering across the secondary seat, thus preserving the primary sealing surface.

Whitten, D. E.↗

Improved geneva mechanism

Locking disk (flange) is stepped and lug is added to each arm of star wheel. These changes allow much longer cutout in star wheel stations, essentially eliminating chatter and wear. Jamming problem can be solved by extending star wheel arms and flaring slots.

Debenham, C. H.↗

Propagation of sound through the Earth's atmosphere. 1: Measurement of sound absorption in the air: 2: Measurement of ground impedance

Parts were fabricated for the acoustic ground impedance meter and the instrument was tested. A rubber hose was used to connect the resonator neck to the chamber in order to suppress vibration from the volume velocity source which caused chatter. An analog to digital converter was successfully hardwired to the computer detection system. The cooling system for the resonant tube was modified to use liquid nitrogen cooling. This produced the required temperature for the tube, but the temperature gradients within each of the four tube sections reached unacceptable levels. Final measurements of the deexcitation of nitrogen by water vapor indicate that the responsible physical process is not the direct vibration-translation energy transfer, but is a vibration-vibration energy transfer.

Meredith, R. W.↗

Pulse control of single degree-of-freedom system

The possibility of using active control for structural and mechanical systems is examined. Open loop adaptive control of structural systems subjected to deterministic and stochastic excitations is considered by means of an algorithm for a single-degree-of-freedom oscillator. The algorithm is heuristic and requires continuous monitoring of the state variables, with a pulse control applied when some prespecified level of control is exceeded. The control algorithm is based on the principle that the gradual rhythmic increase of the structural response can be eliminated by applying a pulse of suitable magnitude in the proper direction, thereby avoiding the application of large forces over sustained periods of time. The optimum pulse magnitude is determined as the minimum rms response of the system. Application to linear and nonlinear systems, as well as in chatter suppression, are outlined.

Udwadia, F. E.↗

Optimal symmetric flight with an intermediate vehicle model

The present investigation is concerned with an examination of optimal symmetry flight on the basis of the intermediate vehicle model. The analysis is partly based upon an exploration of Euler solutions for the path-angle-as-control model carried out by Kelley (1958). The current analysis takes into account higher-order optimality conditions and 'chattering-control' phenomena. Attention is given to details regarding the intermediate vehicle model, the Legendre-Clebsch necessary condition, the conjugate-point test, and the numerical solution of the time-range problem. It is found that the flight path angle takes on the role of control variable in the model. From physical considerations, it can be seen that when a positive margin of thrust over drag exists, the maximum-range climb trajectory without time or fuel constraints has no proper maximum nor an upper bound.

Kelley, H. J.↗

Optimal symmetric flight with an intermediate vehicle model

The present investigation is concerned with an examination of optimal symmetry flight on the basis of the intermediate vehicle model. The analysis is partly based upon an exploration of Euler solutions for the path-angle-as-control model carried out by Kelley (1958). The current analysis takes into account higher-order optimality conditions and "chattering-control' phenomena. Attention is given to details regarding the intermediate vehicle model, the Legendre-Clebsch necessary condition, the conjugate-point test, and the numerical solution of the time-range problem. It is found that the flight path angle takes on the role of control variable in the model. From physical considerations, it can be seen that when a positive margin of thrust over drag exists, the maximum-range climb trajectory without time or fuel constraints has no proper maximum nor an upper bound.

Menon, P. K. A.↗

Low-Friction Joint for Robot Fingers

Mechanical linkage allows adjacent parts to move relative to each other with low friction and with no chatter, slipping, or backlash. Low-friction joint of two surfaces in rolling contact, held in alinement by taut flexible bands. No sliding friction or "stick-slip" motion: Only rolling-contact and bending friction within bands. Proposed linkage intended for finger joints in mechanical hands for robots and manipulators.

Ruoff, C. F.↗

Developmental testing resulting in a simplified liquid oxygen check valve for the Space Shuttle Main Propulsion System

The coil spring in a Space Shuttle liquid oxygen check valve failed due to cyclic fatigue in September, 1991. The dual-flapper, swing check valve is used to prevent reverse flow to the Space Shuttle Main Engines. Upon inspection of the failed component, the spring tangs were found to be missing and heavy wear was observed on the inner diameter of the spring coils. The fracture surfaces revealed that the metal had been steadily worn away until a simple overload caused the final fracture. A series of flow tests using water and a water/gas mixture was conducted to identify the flow phenomenon which produced the cyclic wear. A Plexiglas outlet housing was utilized to view the flapper behavior under different flow conditions and to aid in high speed photography. The tests revealed that flow instabilities induced two oscillatory flapper responses: a rocking mode and a chattering mode. Initially, attempts were made to reduce the spring-flapper oscillations. However, the final solution to the problem was a springless configuration which satisfied the valve's design requirements and eliminated the oscillations. The springless design relied on the inherent ability of the reverse flow momentum to close the flappers.

Aber, Gregory S.↗

Hodograph analysis in aircraft trajectory optimization

An account is given of key geometrical concepts involved in the use of a hodograph as an optimal control theory resource which furnishes a framework for geometrical interpretation of the minimum principle. Attention is given to the effects of different convexity properties on the hodograph, which bear on the existence of solutions and such types of controls as chattering controls, 'bang-bang' control, and/or singular control. Illustrative aircraft trajectory optimization problems are examined in view of this use of the hodograph.

Cliff, Eugene M.↗

Navier-Stokes Flow Field Analysis of Compressible Flow in a Pressure Relief Valve

The present study was motivated to analyze the complex flow field involving gaseous oxygen (GOX) flow in a relief valve (RV). The 9391 RV, pictured in Figure 1, was combined with the pilot valve to regulate the actuation pressure of the main valve system. During a high-pressure flow test at Marshall Space Flight Center (MSFC) the valve system developed a resonance chatter, which destroyed most of the valve body. Figures 2-4 show the valve body before and after accident. It was understood that the subject RV has never been operated at 5500 psia. In order to fully understand the flow behavior in the RV, a computational fluid dynamics (CFD) analysis is carried out to investigate the side load across the piston sleeve and the erosion patterns resulting from flow distribution around piston/nozzle interface.

Vu, Bruce T.↗