Search NASA⌕ Search

SEARCH · Search NASA

Results for “Class VI”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

45 records · Page 3
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

SUBTASK 1.6 – BASIN ELECTRIC CARBON STORAGE RESEARCH PROJECT: NOVEL MONITORING TECHNIQUES

The Energy & Environmental Research Center (EERC) conducted baseline activities associated with an applied research project at Basin Electric Power Cooperative’s (Basin’s) carbon capture and storage (CCS) site in Beulah, North Dakota, to establish novel carbon storage-monitoring techniques as commercial methods under Cooperative Agreement No. DE-FE0024233, Subtask 1.6. The following report summarizes the baseline activities performed and briefly describes the subsequent (operational monitoring) activities that have been proposed to the U.S. Department of Energy (DOE) as part of the overall project to develop and demonstrate novel monitoring techniques at North America’s largest permitted CCS operation. Dakota Gasification Company (DGC), a wholly owned subsidiary of Basin, owns and operates the Great Plains Synfuels Plant (GPSP) approximately 5 miles northwest of the town of Beulah, North Dakota (Figure 1). In 2023, DGC received approval from the North Dakota Industrial Commission (NDIC) to develop a storage facility on-site for injecting a stream of carbon dioxide (CO2) captured from GPSP. DGC will transport the captured CO2 stream with approximately 6.8 miles of transmission lines that extend north of GPSP and inject >1 million tonnes (MMt) of CO2 annually (>1 MMt/yr) over a 12-year period with up to six underground injection control (UIC) Class VI-compliant injection wells completed in the Broom Creek Formation, a predominantly sandstone reservoir and saline aquifer underlying GPSP. The Broom Creek Formation lies approximately 5900 feet (ft) below ground surface (bgs) at GPSP. The commercial scale (i.e., >1 MMt/yr) of DGC’s permitted carbon storage project is ideal for developing and testing the novel monitoring techniques included within Subtask 1.6. The goals of this project are to demonstrate 1) the cost-effectiveness of novel monitoring technologies included as part of this research, 2) technology capability for tracking the CO2 plume and/or associated pressure response in the subsurface and monitoring out-of-zone migration, and 3) compliance with UIC Class VI program requirements. The research activities proposed for the overall project include 1) design of an automated, integrated, modular (AIM) monitoring station; 2) time-lapse electromagnetic (EM) field surveys; 3) drone-based surveillance studies; 4) time-lapse monitoring with seismic methods; 5) advanced wellbore-monitoring methods; 6) deployment of an AIM monitoring network; 7) EM monitoring of CO2 with real-time data processing; 8) continued seasonal drone-based surveillance studies; 9) seismic monitoring with passive and active surveys; and 10) wellbore monitoring with nuclear magnetic resonance (NMR) for near-surface characterization. Completion of Activities 1.0–5.0 (baseline activities) are described in this report. Upon authorization of funding by DOE, the EERC will initiate Activities 6.0– 10.0 (operational monitoring activities). Current state-of-the-art (SOA) carbon storage-monitoring techniques require countless labor hours dedicated to the acquisition of data. Once data are gathered, these SOA techniques often rely on commercial facilities to process raw data from the field. However, it is anticipated that next-generation monitoring techniques, such as those being demonstrated, will lower acquisition footprints, be less operationally intensive, and improve data acquisition efficiencies. These new techniques are more conducive to the application of machine learning, artificial intelligence, and automation, thus providing a pathway for integration into active control systems, informing site operability, and improving the integration of data for future CCS projects across the United States. Additionally, reclaimed and active mining lands are present within the project site, creating a unique opportunity to demonstrate the effectiveness of remote sensing and surface-based geophysics monitoring techniques at similar project sites that may include disturbed, unconsolidated, or actively excavated near-surface environments. The efforts included in the overall project will produce necessary designs, learnings, and data acquired during the baseline and operational monitoring periods that are necessary for time-lapse demonstration and validation of the described monitoring techniques. In addition, it is anticipated that the monitoring technologies included in this study will be compliant with UIC Class VI requirements to enable the potential for implementation at other CCS sites across the United States.

42 ENGINEERING↗
DOE OSTI2026

The future of subsurface monitoring: AEC’s breakthroughs in CCS technology

Carbon capture and storage (CCS) has emerged as a key solution in the fight against climate change. However, for CCS to succeed, it is crucial to ensure that the sequestered CO2 stays safely trapped underground. The U.S. Department of Energy (DOE) has emphasized the need for advancements in subsurface monitoring, measurement, reporting, and verification. Aside from caprock integrity failure, the other primary failure points usually involve defective cement in the casing annulus of wellbores or plugged and abandoned wells. In addition, many energy producers (e.g., oil and gas, geothermal) and storage and disposal operators (e.g., H2 and water) must deal with the same issue. Poorly placed or degraded cement can create pathways for gas or fluid to escape from casing annuli and in plugged and abandoned or orphan wells, posing environmental risks. Yet, a reliable and cost-effective way to monitor cement and well integrity over multiple decades is still unavailable. Traditional geophysical methods like 4D seismic imaging and surface-based electromagnetic monitoring lack the resolution and accuracy for detecting these types of failures (Vasco et al., 2022; Fawad and Mondol, 2021). Wireline logging is expensive to run continuously and is obtrusive to the operation. While fiber optics can potentially be a solution, its bulkiness can significantly compromise the cement's integrity. To address these challenges, the Advanced Energy Consortium (AEC) at The University of Texas at Austin’s Bureau of Economic Geology (the Bureau) has been pioneering research in subsurface monitoring using its portfolio of distributed autonomous microfabricated sensors for harsh subsurface environments since 2008. A class of these microsensors [System on a Chip (SoC)] can be mixed in cement and permanently placed without compromising the cement column; the sensors would then communicate with each other or a data acquisition (DAQ) master node. Another class of the AEC microsensors can be fully autonomous, with rechargeable micro-batteries capable of exceeding 100°C, flash memory, and, currently, a pressure and temperature sensor. They are designed to circulate in mud, geothermal fluids, U-loops, or pipelines. They can log data into memory and are unobtrusive to operations. Our team has been working on a multi-year DOE-funded project (DE-FE0031856)—supported by $2.95M in federal funding and $0.75M in cost-matching from the AEC—to demonstrate SoC sensor utility for CO2 leakage monitoring in CCS applications. This multi-institutional collaboration developed a novel sensing architecture utilizing radiofrequency (RF) microsensors embedded within the cement sheath. These sensors detect CO2 migration and are interrogated via a Smart Casing Collar (SCC).

58 GEOSCIENCES↗
DOE OSTI2025

Improved Guarantees for Optimal Nash Equilibrium Seeking and Bilevel Variational Inequalities

We consider a class of hierarchical variational inequality (VI) problems that subsumes VI-constrained optimization and several other problem classes, including the optimal solution selection problem and the optimal Nash equilibrium (NE) seeking problem. Our main contribution is threefold. (i) We consider bilevel VIs with monotone and Lipschitz continuous mappings and devise a single-timescale iteratively regularized extragradient method, named IR-EG 𝚖,𝚖 . We improve the existing iteration complexity results for addressing both bilevel VI and VI-constrained convex optimization problems. (ii) Under the strong monotonicity of the outer-level mapping, we develop a method named IR-EG 𝚜,𝚖 and derive faster guarantees than those in (i). We also study the iteration complexity of this method under a constant regularization parameter. These results appear to be new for both bilevel VIs and VI-constrained optimization. (iii) To our knowledge, complexity guarantees for computing the optimal NE in nonconvex settings do not exist. Motivated by this lacuna, we consider VI-constrained nonconvex optimization problems and devise an inexactly projected gradient method, named IPR-EG, where the projection onto the unknown set of equilibria is performed using IR-EG 𝚜,𝚖 with a prescribed termination criterion and an adaptive regularization parameter. We obtain new complexity guarantees in terms of a residual map and an infeasibility metric for computing a stationary point. Here, we validate the theoretical findings using preliminary numerical experiments for computing the best and the worst NEs.

bilevel optimization↗
DOE OSTI2025

Triel-Defined Helicity in One-Dimensional III–VI–VII van der Waals Crystals

Inorganic extended lattice solids that bear complex helical motifs manifest unusual physical and quantum states that arise due to their noncentrosymmetric or chiral nature. However, the systematic understanding of how elemental composition influences the structure and physical properties in helical inorganic crystals has been precluded by the rarity of these materials and the lack of modular phases that display such motifs. Here, we report the synthesis of AlSeI single crystals, the first aluminum-containing helical crystal in the III-VI-VII 1D van der Waals class. AlSeI completes the experimentally accessible triel series in the helical selene iodides alongside InSeI and GaSeI. Using the Al, Ga, and In triel series in this selene iodide class, we experimentally demonstrate the evolution of the local quasi-tetrahedral building unit geometry, chain packing, helical parameters, and band gaps based primarily on the identity of the triel atom. Our results underscore the chemical modularity of these phases, the broad range of helical parameters, and the spectrum of electronic states from the visible to the ultraviolet range in this emergent class of 1D, exfoliable, and helical extended lattice solids.

Chemical structure↗
DOE OSTI2025

Analysis of correlations between intrinsic ductility and electronic density of states in refractory alloys

High entropy alloys (HEAs) correspond to a new and emerging class of materials that allows us to explore a large composition space to tune mechanical strength and thermal stability. Therefore, to design better alloys, it is important to scan the high-dimensional space of chemistry, composition and temperature. Here, to facilitate this search, we present a method to screen intrinsically ductile body centered cubic (BCC) refractory alloys from electronic structure calculations by using the density of states (DOS) at the Fermi level, g(μ F ). This correlation between intrinsic ductility and g(μ F ) is tested by analyzing group V (V, Nb, Ta) and VI (Mo, W) refractory metals, binary alloys, such as W-Nb, W-V, Mo-Nb and Mo-V, and refractory alloys for which experimental stress-strain measurements are available. In addition, we perform a high-throughput exploration of the entire composition space of a recently proposed alloy system, CrMoNbV, and identify compositions that exhibit high intrinsic ductility.

36 MATERIALS SCIENCE↗
DOE OSTI2025

A structured framework for predicting sustainable aviation fuel properties using liquid-phase FTIR and machine learning

Sustainable aviation fuels have the potential to improve efficiency, reduce emissions, and enhance energy security. To help identify viable sustainable aviation fuels and accelerate research, machine learning models have been developed to predict relevant physicochemical properties. However, many models have limited applicability, leverage data from complex analytical techniques with confined spectral ranges, or use feature decomposition methods that offer limited interpretability. Using liquid-phase Fourier Transform Infrared (FTIR) spectra, this study presents a structured method for creating accurate and interpretable property prediction models for neat molecules, aviation fuels, and blends. Liquid FTIR spectra can be collected quickly and consistently, offering high reliability, sensitivity, and component specificity using less than 2 ml of sample. The method first decomposes FTIR spectra into fundamental building blocks using non-negative matrix factorization (NMF) to enable scientific analysis of FTIR spectra attributes and fuel properties. The NMF features are then used to create five ensemble models for predicting final boiling point, flash point, freezing point, density at 15°C, and kinematic viscosity at -20°C. All models were trained using experimental property data from neat molecules, aviation fuels, and blends. The models accurately predict key properties across a broad range of neat molecules and representative fuels and blends, while enabling interpretation of relationships between compositional elements, such as functional groups or chemical classes, and their resulting properties. This demonstrates strong potential to support sustainable aviation fuel research and development. The models and data are available on an interactive web tool.

Fourier transform infrared spectroscopy↗
DOE OSTI2024

Molecular dynamics simulations of uranyl and plutonyl cations in a task-specific ionic liquid

Ionic liquids (ILs) are a unique class of solvents with potential applications in advanced separation technologies relevant to the nuclear industry. ILs are salts with low melting points and a wide range of tunable physical properties, such as viscosity, hydrophobiciy, conductivity, and liquidus range. ILs have negligible vapor pressure, are often non-flammable, and can have high thermal stability and a wide electrochemical window, making them attractive for use in separations processes relevant to the nuclear industry. Metal salts generally have a low solubility in ILs; however, by incorporating new functional groups into the IL cation or anion that promote complexation with the metal, the solubility can be greatly increased. One such task-specific ionic liquid (TSIL) is 1-carboxy-N, N, N-trimethylglycine bis(trifluoromethylsulfonyl)imide ([Hbet][Tf 2 N]). Water, which is detrimental for electrochemical separations, is a common impurity in ILs and can coordinate with actinyl cations, particularly in ILs containing only weakly coordinating components. Understanding the behavior of actinides in TSIL/water mixtures on a molecular level is vital for designing improved separations processes. Classical molecular dynamics simulations of uranyl(VI) and plutonyl(VI) in 1-ethyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide ([EMIM][Tf 2 N]) with deprotonated Hbet (betaine) and water have been performed to understand the coordination and dynamics of the actinyl cations. We find that betaine is a much stronger ligand than water and prefers to coordinate the metal in a bidentate manner. Potential of mean force simulations yield a relative free energy for betaine coordination of approximately -120 to -90 kJ/mol in mixtures with water. As the amount of betaine coordinated to the actinide increases, the diffusion coefficient of the actinyl cation decreases. Moreover, the betaine ligand is able to bridge between two metal centers, resulting in dimeric complexes with actinide–actinide distances of ~5 Å. Potential of mean force simulations show that these structures are stable, with relative free energies of up to -40 kJ/mol. The crystal structure for [(UO 2 ) 2 (bet) 6 (H 2 O) 2 ][Tf 2 N] 4 shows that the betaine bridges between two uranium atoms to form dimeric complexes similar to those found in our simulations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Toward UV models of kinetic mixing and portal matter. VI. A more complex dark matter sector?

Portal matter (PM), having both Standard Model (SM) and dark sector charges, can induce kinetic mixing between the 𝑈⁢(1) 𝐷 dark photon and the SM gauge fields at the 1-loop level offering an attractive mechanism by which light (≲1 GeV) thermal dark matter (DM) can interact with visible matter and obtain its observed relic density. In doing so, if the DM is fermionic, the CMB and other astrophysical observations inform us that it must be Majorana/pseudo-Dirac in nature to avoid velocity/temperature-independent 𝑠-wave annihilation to SM final states. How does this idea fit into a more UV-complete picture also including the SM interactions? There are some reasons to believe that at least a first step along this path may not lie too far away in energy due to the renormalization group equations running of the dark gauge coupling, which for a significant range of parameters, becomes nonperturbative at/before the ∼10’s of TeV energy range. This implies that 𝑈⁢(1) 𝐷 must become embedded in an asymptotically free, non-Abelian group, 𝐺 𝐷 , before this can occur. The breaking of this larger group then produces the masses for the PM and the additional gauge fields associated with 𝐺 𝐷 then can lead to new interactions between the SM and the dark sector. Following several bottom-up approaches, we have examined a set of distinctive and testable phenomenological features associated with this general setup, based upon a number of simplifying assumptions. Clearly, it behooves us to explore the impact of these specific assumptions on these predictions for the array of possible experimental tests of this class of models. In most past analyses it has been assumed that DM is a vectorlike, complex singlet under the group 𝐺 𝐷 . If this assumption is relaxed, the dark sector must be augmented by additional fermion(s) and the associated scalar fields needed to break the gauge symmetries while generating the needed Majorana-like mass terms for the DM. In this paper, we analyze the simplest extension of this kind wherein the DM lies in a vectorlike doublet of 𝐺 𝐷 , which we take to have the structure 𝑆⁢𝑈⁢(2) 𝐼 ×𝑈⁢(1) 𝑌 𝐼 as in earlier work, leading to new phenomenological implications. We find, for example, that given the current LHC search constraints on the masses of heavy gauge bosons, the production of these new dark states with large rates is unlikely to occur at colliders unless they are produced singly in 𝑔⁡𝑔 fusion or their pair production cross sections are resonantly enhanced. Here, we also find that an additional mechanism arises to generate hierarchal neutrino masses in such a setup.

Extensions of Higgs sector↗