SEARCH · Search NASA
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
A schema-less cloud-based distributed data collection system with dynamic validation and comprehensive system status and alerting provided a reconfigurable data collection system to solve evolving incoming data schemas. Successful adaptation of the dynamic validation was useful in conforming to the evolution of incoming data.
This paper summarizes the on-orbit modal test and the related modal analysis, model validation and correlation performed for the ISS Stage ULF4, DTF S4-1A, October 11,2010, GMT 284/06:13:00.00. The objective of this analysis is to validate and correlate analytical models with the intent to verify the ISS critical interface dynamic loads and improve fatigue life prediction. For the ISS configurations under consideration, on-orbit dynamic responses were collected with Russian vehicles attached and without the Orbiter attached to the ISS. ISS instrumentation systems that were used to collect the dynamic responses during the DTF S4-1A included the Internal Wireless Instrumentation System (IWIS), External Wireless Instrumentation System (EWIS), Structural Dynamic Measurement System (SDMS), Space Acceleration Measurement System (SAMS), Inertial Measurement Unit (IMU) and ISS External Cameras. Experimental modal analyses were performed on the measured data to extract modal parameters including frequency, damping and mode shape information. Correlation and comparisons between test and analytical modal parameters were performed to assess the accuracy of models for the ISS configuration under consideration. Based on the frequency comparisons, the accuracy of the mathematical models is assessed and model refinement recommendations are given. Section 2.0 of this report presents the math model used in the analysis. This section also describes the ISS configuration under consideration and summarizes the associated primary modes of interest along with the fundamental appendage modes. Section 3.0 discusses the details of the ISS Stage ULF4 DTF S4-1A test. Section 4.0 discusses the on-orbit instrumentation systems that were used in the collection of the data analyzed in this paper. The modal analysis approach and results used in the analysis of the collected data are summarized in Section 5.0. The model correlation and validation effort is reported in Section 6.0. Conclusions and recommendations drawn from this analysis are included in Section 7.0.
Mathematical model simulation of solar-thermal energy conversion systems and collectors
Solar reflector mathematical model for studying interface between collector and heat receiver, noting error in cavity emitted radiation directional assumption
This collection of papers was presented at the Computational Fluid Dynamics (CFD) Conference held at Ames Research Center in California on March 12 through 14, 1991. It is an overview of CFD activities at NASA Lewis Research Center. The main thrust of computational work at Lewis is aimed at propulsion systems. Specific issues related to propulsion CFD and associated modeling will also be presented. Examples of results obtained with the most recent algorithm development will also be presented.
Gas dynamics, combustion physics, shock wave propagation, external friction, heat exchange, supersonic flow, density distribution
To support data collection for dynamic human reliability analysis (HRA), this study investigates time distributions for task primitives defined in the Goals, Operators, Methods, and Selection rules (GOMS)–Human Reliability Analysis (HRA) method and Human Reliability data EXtraction (HuREX). GOMS-HRA was developed to provide cognition-based time and human error probability (HEP) information for dynamic HRA calculations within the Human Unimodel for Nuclear Technology to Enhance Reliability (HUNTER) framework, while HuREX is a comprehensive HRA data collection method developed by the Korea Atomic Energy Research Institute (KAERI). In this paper, we examine time distributions by using experimental data collected from the Simplified Human Error Experimental Program (SHEEP) study, which proposes an HRA data collection framework to complement full-scope simulator research and gather input data for dynamic HRA by using simplified simulators such as the Rancor Microworld simulator. This paper investigates whether the time required for GOMS-HRA and HuREX task primitives fits 13 statistical distributions. Additionally, we compare and discuss the time distributions obtained from both student operators and professional operators. The result was that this study identified several time distributions for five GOMS-HRA and four HuREX task primitives. In the future, the results of this study are expected to provide objective reference data on the elapsed time for task primitives and aid in realistically simulating scenarios within dynamic HRA.
A dynamical system which mimics collective purposeful activities of a set of units of intelligence is introduced and discussed. A global control of the unit activities is replaced by the probabilistic correlations between them. These correlations are learned during a long term period of performing collective tasks, and are stored in the synaptic interconnections. The model is represented by a system of ordinary differential equations with terminal attractors and repellers, and does not contain any man-made digital devices.
G-Sample is designed for sample collection missions to identify the presence and quantity of sample material gathered by spacecraft equipped with end effectors. The software method uses a maximum-likelihood estimator to identify the collected sample's mass based on onboard force-sensor measurements, thruster firings, and a dynamics model of the spacecraft. This makes sample mass identification a computation rather than a process requiring additional hardware. Simulation examples of G-Sample are provided for spacecraft model configurations with a sample collection device mounted on the end of an extended boom. In the absence of thrust knowledge errors, the results indicate that G-Sample can identify the amount of collected sample mass to within 10 grams (with 95-percent confidence) by using a force sensor with a noise and quantization floor of 50 micrometers. These results hold even in the presence of realistic parametric uncertainty in actual spacecraft inertia, center-of-mass offset, and first flexibility modes. Thrust profile knowledge is shown to be a dominant sensitivity for G-Sample, entering in a nearly one-to-one relationship with the final mass estimation error. This means thrust profiles should be well characterized with onboard accelerometers prior to sample collection. An overall sample-mass estimation error budget has been developed to approximate the effect of model uncertainty, sensor noise, data rate, and thrust profile error on the expected estimate of collected sample mass.
A novel approach for modeling the aero-propulsive characteristics of an electric vertical takeoff and landing (eVTOL) aircraft was developed and demonstrated in wind tunnel testing. The approach was applied to the NASA LA-8 tandem tilt-wing eVTOL aircraft, using an efficient, hybrid experiment design composed of a static I-optimal response surface design for slowly-varying test variables, and dynamic orthogonal phase-optimized multisine excitations for the control surfaces and electric propulsors. Both the static and dynamic experiment designs were executed simultaneously to collect informative data for model identification. Statistically-weighted multivariate orthogonal function modeling was used to combine local modeling results computed in the frequency domain using data collected with dynamic excitations operating on the control effectors to form an aggregate aero-propulsive model. The final identified model exhibited good predictive capability when compared to validation data acquired separately from the data used to develop the model. The required test time using these new techniques was reduced by at least a factor of five compared to previous static wind tunnel testing for the LA-8 aircraft, while providing more informative data, greater parameterization flexibility, and high-quality models.
Metaequilibrium state of one-dimensional star gas computed for interesting initial conditions corresponds to minimum energy configuration
A charge density wave (CDW) is a phase of matter characterized by a periodic modulation of valence electron density coupled with lattice distortion. Its formation is closely tied to the dynamical charge susceptibility, χ(q, ω) , which reflects the collective electron dynamics of the material. Despite decades of study, χ(q, ω) near a CDW transition has never been measured at nonzero momentum, q, with meV energy resolution. Here, we investigate the canonical CDW transition in ErTe 3 using momentum-resolved electron energy loss spectroscopy, a technique uniquely sensitive to valence band charge excitations. Unlike phonons, which soften via the Kohn anomaly, we find the electronic excitations exhibit purely relaxational dynamics well described by a diffusive model, with the diffusivity peaking just below the critical temperature, T C1 . Additionally, we report for the first time a divergence in the real part of χ(q, ω) in the static limit (ω → 0), a long-predicted hallmark of CDWs. Unexpectedly, this divergence occurs as T → 0, with only a weak thermodynamic signature at T = T C1 . Our study necessitates a reexamination of the traditional description of CDW formation in quantum materials.
Test runs in the pilot plants consume significant resources, and therefore, the learning from test runs should be maximized. Test runs conducted in the pilot plants are often steady state. It takes several hours for reaching steady-state in the pilot plants, and thus, the duration of the test runs needs to be long even for collecting few steady-state data points. On the other hand, a large number of measurements can be collected through dynamic test runs in a short span of time. This paper presents a systematic design of dynamic experiments (DoDEs) for identifiability of model parameters, which is achieved by persistently exciting the inputs signals. A pseudorandom binary sequence (PRBS) is designed as the input signal for DoDE due to its efficiency in obtaining sufficient spectral content. However, due to the long sequence size of the PRBS signal, a Schroeder-phase input signal, which is a multisine signal, is also designed. Tests for both types of signals are run in the Pilot Solvent Test Unit (PSTU) at the National Carbon Capture Center in Wilsonville, Alabama. The transient data are used to solve dynamic data reconciliation and parameter estimation problem. The estimated parameters are found to be not only superior to those estimated from using data collected from hundreds of steady-state test runs in a nonreactive (air–water) system, but the parameters could be estimated by using the dynamic data collected for about 24 h from the pilot plant for the MEA-H 2 O–CO 2 system.
We explore the utility of qutrits and qubits for simulating the flavor dynamics of dense neutrino systems. The evolution of such systems impacts some important astrophysical processes, such as core-collapse supernovae and the nucleosynthesis of heavy nuclei. Many-body simulations require classical resources beyond current computing capabilities for physically relevant system sizes. Quantum computers are therefore a promising candidate to efficiently simulate the many-body dynamics of collective neutrino oscillations. Previous quantum simulation efforts have primarily focused on properties of the two-flavor approximation due to their direct mapping to qubits. Furthermore, we present new quantum circuits for simulating three-flavor neutrino systems on qutrit- and qubit-based platforms, and demonstrate their feasibility by simulating systems of two, four, and eight neutrinos on IBM and Quantinuum quantum computers.
This dataset provides inputs, evaluation results, and trained weights from a large-sample Long Short-Term Memory (LSTM) model designed to predict daily stream temperatures across unregulated river reaches in the conterminous United States (CONUS). It includes dynamic meteorological and hydrologic forcings, static physiographic attributes, and model outputs from cross-validation experiments spanning 300 basins. It supports reproducible modeling, direct application for new basins, and provides data suitable for integration with reservoir and river simulations under current and future climates. It contains two .zip files described below · RQ-AI_runs.zip: Model outputs from 10-fold cross-validation experiments, including observed and predicted daily stream temperatures, along with test performance metrics for water years 2017–2019. Two versions are included: 1. Model trained and validated using subbasin-area weighted dynamic features. 2. Model trained and validated using whole-basin area weighted dynamic features. · RQ-AI_inputs.zip: Collection of all formatted dynamic and static predictor datasets (meteorological, hydrologic, and physiographic features) used in model training and analysis. Detailed instructions and data structure is held at the following GitLab repository: https://code.ornl.gov/tempwise/training.
Information related to land surface phenology is important for a variety of applications. For example, phenology is widely used as a diagnostic of ecosystem response to global change. In addition, phenology influences seasonal scale fluxes of water, energy, and carbon between the land surface and atmosphere. Increasingly, the importance of phenology for studies of habitat and biodiversity is also being recognized. While many data sets related to plant phenology have been collected at specific sites or in networks focused on individual plants or plant species, remote sensing provides the only way to observe and monitor phenology over large scales and at regular intervals. The MODIS Global Land Cover Dynamics Product was developed to support investigations that require regional to global scale information related to spatiotemporal dynamics in land surface phenology. Here we describe the Collection 5 version of this product, which represents a substantial refinement relative to the Collection 4 product. This new version provides information related to land surface phenology at higher spatial resolution than Collection 4 (500-m vs. 1-km), and is based on 8-day instead of 16-day input data. The paper presents a brief overview of the algorithm, followed by an assessment of the product. To this end, we present (1) a comparison of results from Collection 5 versus Collection 4 for selected MODIS tiles that span a range of climate and ecological conditions, (2) a characterization of interannual variation in Collections 4 and 5 data for North America from 2001 to 2006, and (3) a comparison of Collection 5 results against ground observations for two forest sites in the northeastern United States. Results show that the Collection 5 product is qualitatively similar to Collection 4. However, Collection 5 has fewer missing values outside of regions with persistent cloud cover and atmospheric aerosols. Interannual variability in Collection 5 is consistent with expected ranges of variance suggesting that the algorithm is reliable and robust, except in the tropics where some systematic differences are observed. Finally, comparisons with ground data suggest that the algorithm is performing well, but that end of season metrics associated with vegetation senescence and dormancy have higher uncertainties than start of season metrics.
Memory effects are essential for the dynamics of condensed materials and are responsible for non-exponential relaxation of correlation functions of dynamic variables through the memory function. Memory functions of dipole rotations for water have never been calculated directly from molecular dynamics simulations. We present here calculations of memory functions for single-dipole rotations and for the overall dipole moment of the sample for SPC/E water. The normalized memory functions for single-particle and collective dipole dynamics turn out to be nearly identical. This result validates theories of dielectric spectroscopy in terms of single-particle time correlation functions and the connection between the collective and single-particle relaxation times through the Kirkwood factor. The dielectric function in this formalism contains no new dynamic information that does not exist in the single-dipole correlation function. A short memory time, ≲1 fs, justifies the use of the mathematics of rotational diffusion to describe the dynamics of a single molecular dipole moment in bulk water. Here, an analytical equation for the rotational memory time is derived.
Ongoing modal analyses and model correlation are performed on different configurations of the International Space Station (ISS). These analyses utilize on-orbit dynamic measurements collected using four main ISS instrumentation systems: External Wireless Instrumentation System (EWIS), Internal Wireless Instrumentation System (IWIS), Space Acceleration Measurement System (SAMS), and Structural Dynamic Measurement System (SDMS). Remote Sensor Units (RSUs) are network relay stations that acquire flight data from sensors. Measured data is stored in the Remote Sensor Unit (RSU) until it receives a command to download data via RF to the Network Control Unit (NCU). Since each RSU has its own clock, it is necessary to synchronize measurements before analysis. Imprecise synchronization impacts analysis results. A study was performed to evaluate three different synchronization techniques: (i) measurements visually aligned to analytical time-response data using model comparison, (ii) Frequency Domain Decomposition (FDD), and (iii) lag from cross-correlation to align measurements. This paper presents the results of this study.