Search NASA⌕ Search

SEARCH · Search NASA

Results for “Columbia Investigation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Improved Performance of Cu(InGa)(SeS) 2 PV Modules Using the Reaction of Metal Precursors. Final Report

This project “Improved Performance of Cu(InGa)(SeS) 2 PV Modules using the Reaction of Metal Precursors” was a partnership led by the Institute of Energy Conversion (IEC) at the University of Delaware with Columbia University and the Molecular Foundry at the Lawrence Berkeley National Laboratory. The aim was to develop pathways to improve Cu(InGa)(SeS) 2 (CIGSS) thin film photovoltaic modules using processes compatible with low manufacturing cost. The CIGSS approach investigated was a two-step process including deposition of metal precursor films following by reaction in hydride gases utilizing IEC’s novel reactor. The process was similar to that under commercial development by the project’s industry partner Stion. When Stion went out of business mid-project the focus changed to a rapid thermal process considered more commercially viable. Approaches to improve the performance of solar cells using the reacted films focused on two material innovations. First, the overall Ga content was increased to increase the operating voltage, which is desirable for scale-up to commercial modules. Second, the processing and performance advantages arising from Ag alloying were investigated. Advanced characterization guided process and material development including control of relative composition gradients. Research on the formation of Cu-Ga-In metal precursors utilized sputtering deposition which is normally used in commercial applications. The work resulted in processes for deposition of precursor stacks with increased relative Ga content and effects of deposition parameters on morphology and phase composition were established. It was shown that the metal precursor films have comparable phase composition and morphology so subsequent reaction follows from the same starting point. The addition of Ag to the metal precursors gave more uniform morphology and improved adhesion of reacted films which enable higher reaction temperature for faster processing. A novel outcome was the discovery of a previously undocumented material phase in sputter-deposited and evaporated Ag-Cu-In-Ga thin films. Hydride gas reaction processes including time-temperature-concentration profiles were developed for different precursor compositions. This enables control of composition profiles to engineer through-film gradients for solar cell optimization with characterization and simulations used to correlate measured film composition profiles to measurements of devices. In particular, the gradient of sulfur at the front of the CIGSS film was found to be critical. The simulations guided process development leading to improved reproducibility of devices improved performance with higher Ga content and higher voltage. With Ag-alloyed precursors, the reaction pathways leading were determined. A significant finding was that Ag-alloying increases the reaction rate to completely convert precursor films to the final chalcopyrite which could enable reduced reaction time to benefit manufacturability. To maintain potential commercial viability, the process under investigation was refocused to a rapid thermal process that could potentially be incorporated into an in-line process for manufacturing. Precursors with different composition were capped with an extra selenium layer and reacted in hydrogen sulfide 5-15 minutes, compared to typically 2 hours in the previous multi-step batch process. Critical RTP parameters were identified to control the reaction. Further optimization would be needed for high efficiency solar cells but pathways to high quality devices with further optimization and improved heating uniformity were developed. The project also developed new optoelectronic characterization approaches with a focus on development and application of spatial- and time-resolved photoluminescence and a custom mapping photoluminescence microscope built. It was shown how critical electronic transport properties strongly depend on the chemical composition of the material and that a wide range of samples show inhomogeneity on a length scale larger than the grains in the films. Additionally, two-photon excitation capability was developed to distinguish bulk vs surface losses. The project advances the state-of-the -art for precursor reaction processes in several ways that could impact manufacturing. This includes validation of approaches to increase voltage and establishment of model-guided control to form optimal composition profiles. The application of process control approaches with knowledge of phase formation and reaction pathways can be critically valuable in designing a large-scale process.

14 SOLAR ENERGY↗
DOE OSTI2022

Cumulative effects of piscivorous colonial waterbirds on juvenile salmonids: A multi predator-prey species evaluation

We investigated the cumulative effects of predation by piscivorous colonial waterbirds on the survival of multiple salmonid ( Oncorhynchus spp.) populations listed under the U.S. Endangered Species Act (ESA) and determined what proportion of all sources of fish mortality (1 –survival) were due to birds in the Columbia River basin, USA. Anadromous juvenile salmonids (smolts) were exposed to predation by Caspian terns ( Hydroprogne caspia ), double-crested cormorants ( Nannopterum auritum ), California gulls ( Larus californicus ), and ring-billed gulls ( L . delawarensis ), birds known to consume both live and dead fish. Avian consumption and survival probabilities (proportion of available fish consumed or alive) were estimated for steelhead trout ( O . mykiss ), yearling Chinook salmon ( O . tshawytscha ), sub-yearling Chinook salmon, and sockeye salmon ( O . nerka ) during out-migration from the lower Snake River to the Pacific Ocean during an 11-year study period (2008–2018). Results indicated that probabilities of avian consumption varied greatly across salmonid populations, bird species, colony location, river reach, and year. Cumulative consumption probabilities (consumption by birds from all colonies combined) were consistently the highest for steelhead, with annual estimates ranging from 0.22 (95% credible interval = 0.20–0.26) to 0.51 (0.43–0.60) of available smolts. The cumulative effects of avian consumption were significantly lower for yearling and sub-yearling Chinook salmon, with consumption probabilities ranging annually from 0.04 (0.02–0.07) to 0.10 (0.07–0.15) and from 0.06 (0.3–0.09) to 0.15 (0.10–0.23), respectively. Avian consumption probabilities for sockeye salmon smolts was generally higher than for Chinook salmon smolts, but lower than for steelhead smolts, ranging annually from 0.08 (0.03–0.22) to 0.25 (0.14–0.44). Although annual consumption probabilities for birds from certain colonies were more than 0.20 of available smolts, probabilities from other colonies were less than 0.01 of available smolts, indicating that not all colonies of birds posed a substantial risk to smolt mortality. Consumption probabilities were lowest for small colonies and for colonies located a considerable distance from the Snake and Columbia rivers. Total mortality attributed to avian consumption was relatively small for Chinook salmon (less than 10%) but was the single greatest source of mortality for steelhead (greater than 50%) in all years evaluated. Results suggest that the potential benefits to salmonid populations of managing birds to reduce smolt mortality would vary widely depending on the salmonid population, the species of bird, and the size and location of the breeding colony.

Evans, Allen F.↗
DOE OSTI2025

Larval connectivity for European green crab management in the Salish Sea and surrounding waters

The presence of invasive species is a growing concern in coastal marine ecosystems because of their adverse effects on biodiversity. The European green crab Carcinus maenas (EGC) is a small crab inhabiting inshore areas. Although it is native to the Northeast Atlantic Ocean and Baltic Sea, its distribution has expanded to North America, where it is an invasive species. Its main food sources are small invertebrate species that support valuable fisheries in the USA. The first presence of EGC in northern Washington was observed around 20 yr ago, along the Pacific Coast of the USA. Recently, EGC has been detected throughout the Salish Sea (Washington, USA, and British Columbia, Canada) wherein spread dynamics are unknown. The overall distribution of EGC is mainly driven by larval dispersal and, in the Salish Sea and surrounding waters, the assessment of EGC population dynamics is essential to understand its migration patterns and prevent its future expansion. To investigate the dispersal patterns of EGC larvae, a larval dispersal model was developed which couples a regional model of hydrodynamic circulation with an individual-based model of ichthyoplankton dynamics. Simulations were performed over 9 yr (2013-2022) to analyze average larval transport trends in the Salish Sea and surrounding waters, interannual variability of EGC larval connectivity, and the influence of larval behavior on connectivity patterns. Lastly, areas were identified to inform invasive species management moving forward. The prediction of likely sources and settlement locations of EGC larvae from the model will help improve the management of the population in the Salish Sea and surrounding waters.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2023

New Insights from Legacy Seismic Data regarding Basalt Elevations and Variability on the Hanford Site

Migration of groundwater contaminants in the Gable Gap area of the Hanford Site in southeastern Washington State is strongly influenced by the distribution and permeability of basalts that lie beneath an unconfined aquifer. Locally, folding and faulting of the Columbia River Basalt associated with the Yakima fold and thrust belt followed by erosion due to the Lake Missoula floods resulted in a complex basalt surface that represents either an impermeable lower boundary to the unconfined aquifer system or localized regions of increased permeability that potentially promote communication between the unconfined aquifer system and deeper, confined aquifer systems. Paleo-channels carved into the basalt by floodwaters are thought to provide preferential flow paths for groundwater contaminants. In 2011, a seismic landstreamer campaign was carried out to image the basalt surface and produced pre-stack depth migrated p-wave reflection images. The reflection images identified two large troughs that may represent paleo-channels and several areas of possible faulting. Here, the streamer data are re-analyzed using refraction travel-time and Rayleigh wave dispersion analyses to obtain images of compressional and shear wave velocities within the suprabasalt sediment sections and the upper basalt surface. The combined interpretation of reflection and seismic velocity images shows complexity in the basalt velocity and elevation, which varies by 50 m or more within the study area. These results, along with other ongoing geophysical investigations, will be used to inform the site geologic model and potentially guide placement of future boreholes needed to quantify vertical flow between the confined and unconfined aquifers.

58 GEOSCIENCES↗
DOE OSTI2025

An alternative ground state of MnBi 2 Te 4 obtained by magnetic annealing

Magnetic topological insulators are extremely interesting because they combine the unique properties of topological insulators with magnetism. While as-grown MnBi 2 Te 4 single crystals exhibit an A-type antiferromagnetic (AFM) ordering at T N ≈ 24 K, annealed MnBi 2 Te 4 under 10 T leads to the change of the magnetic properties from AFM to superparamagnetic behavior with the trend of the magnetization saturation at 2 K. Correspondingly, the magnetotransport properties change as well, revealing large positive magnetoresistance with the linear field dependence at low temperatures. Through the first-principles calculations, we provide insight into the experimental results. Our investigation demonstrates that magnetic annealing is a powerful approach for manipulating material properties due to the nearly degenerate ground states in MnBi 2 Te 4 .

Electronic transport↗
DOE OSTI2025

Suppression of Chorismate Mutase 1 in Hybrid Poplar to Investigate Potential Redundancy in the Supply of Lignin Precursors

Chorismate is an important branchpoint metabolite in the biosynthesis of lignin and a wide array of metabolites in plants. Chorismate mutase (CM), the enzyme responsible for transforming chorismate into prephenate, is a key regulator of metabolic flux towards the synthesis of aromatic amino acids and onwards to lignin. We examined three CM genes in hybrid poplar (Populus alba × grandidentata; P39, abbreviated as Pa×g) and used RNA interference (RNAi) to suppress the expression of Pa×gCM1, the most highly expressed isoform found in xylem tissue. Although this strategy was successful in disrupting Pa×gCM1 transcripts, there was also an unanticipated increase in lignin content, a shift towards guaiacyl lignin units, and more xylem vessels with smaller lumen areas, at least in the most severely affected transgenic line. This was accompanied by compensatory expression of the other two CM isoforms, Pa×gCM2 and Pa×gCM3, as well as widespread changes in gene expression and metabolism. This study investigates potential redundancy within the CM gene family in the developing xylem of poplar and highlights the pivotal role of chorismate in plant metabolism, development, and physiology.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2021

Adaptive Site Management Strategies for the Hanford Central Plateau Groundwater

Adaptive site management (ASM) is a systematic and iterative management approach that can be used to expedite the remediation of large and/or complex sites. ASM is defined as a formal and systematic project or site management approach centered on rigorous site planning and a firm understanding of site conditions and uncertainties, using science and technology to routinely re-evaluate and prioritize site remedial actions and characterization activities. The goal of the approach is to create a framework of structured and continuous planning, implementation, and assessment processes that accommodates new information and changing site conditions to develop effective and efficient cleanup approaches that achieves the required outcome(s) while optimizing costs, cleanup timeframe, and performance. Central to ASM is an evolving conceptual site model (CSM). Over time, incremental reductions in uncertainty associated with the CSM will occur, while supporting continued progress toward site cleanup and closure through remedy optimization and evaluation. ASM has the potential to expedite cleanup for the Central Plateau area at Hanford through a planned and systematic approach for reducing uncertainty with targeted characterization activities, while continuing remediation activities that advance cleanup for key risk-driving contaminants. A core component of cleanup within the Central Plateau is the 200 West Pump-and-Treat (P&T) system. Even with an active P&T remedy, uncertainty exists with respect to plume distributions, total mass in the aquifer, and currently known continuing sources. Additional uncertainty is associated with multiple contaminant source locations in the vadose zone, which have the potential to create new groundwater plumes in the absence of any source control measures, although not all contaminant fluxes to groundwater will result in contaminant concentrations above cleanup levels. Collectively, these uncertainties need to be addressed in the CSM to support effective and efficient site progress toward cleanup goal(s). Other nontechnical factors that may warrant an ASM approach at the Hanford Central Plateau are associated with the formation of operable units (OUs) used to manage cleanup. With the exception of the 200-ZP-1 OU, the three remaining groundwater OUs only have interim action records of decision. Nine vadose zone source area OUs are also in the early stages of the remedial investigation and feasibility study process, with pending characterization and technology identification activities. A set of proposed site objectives for the Central Plateau are provided in this document as an initial consideration/example and basis for discussion for ASM implementation. These example site objectives were selected with the goal of maintaining protectiveness at the Columbia River through confinement of contaminant plumes within an administratively controlled area below existing surface waste sites and waste disposal facilities. Although site decision makers and regulators need to provide concurrence, these site objectives are used in this document to describe the elements of an ASM approach, including selection of interim objectives and a long-term adaptive management plan. Interim objectives are also defined to yield measurable incremental progress toward the overall site goals. This document identifies initial technical considerations for developing an ASM framework for the Central Plateau cleanup decisions. These considerations are intended to facilitate more specific decisions, such as objectives, near- and long-term actions, and performance metrics, to develop an overall approach that maintains protectiveness but recognizes the uncertainty, long timeframe, and technical challenges that need to be considered in selecting, implementing, and managing remediation at the Hanford Central Plateau.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2025

Constraints on cosmology and baryonic feedback with joint analysis of Dark Energy Survey Year 3 lensing data and ACT DR6 thermal Sunyaev-Zel'dovich effect observations

We present a joint analysis of weak gravitational lensing (shear) data obtained from the first three years of observations by the Dark Energy Survey and thermal Sunyaev-Zel'dovich (tSZ) effect measurements from a combination of Atacama Cosmology Telescope (ACT) and Planck data. A combined analysis of shear (which traces the projected mass) with the tSZ effect (which traces the projected gas pressure) can jointly probe both the distribution of matter and the thermodynamic state of the gas, accounting for the correlated effects of baryonic feedback on both observables. We detect the shear$~\times~$tSZ cross-correlation at a 21$\sigma$ significance, the highest to date, after minimizing the bias from cosmic infrared background leakage in the tSZ map. By jointly modeling the small-scale shear auto-correlation and the shear$~\times~$tSZ cross-correlation, we obtain $S_8 = 0.811^{+0.015}_{-0.012}$ and $\Omega_{\rm m} = 0.263^{+0.023}_{-0.030}$, results consistent with primary CMB analyses from Planck and P-ACT. We find evidence for reduced thermal gas pressure in dark matter halos with masses $M < 10^{14} \, M_{\odot}/h$, supporting predictions of enhanced feedback from active galactic nuclei on gas thermodynamics. A comparison of the inferred matter power suppression reveals a $2-4\sigma$ tension with hydrodynamical simulations that implement mild baryonic feedback, as our constraints prefer a stronger suppression. Finally, we investigate biases from cosmic infrared background leakage in the tSZ-shear cross-correlation measurements, employing mitigation techniques to ensure a robust inference. Our code is publicly available on GitHub.

Pandey, S. [Johns Hopkins U.; Columbia U.] (ORCID:↗
DOE OSTI2021

Comparison of Observations and Predictions of Daytime Planetary-Boundary-Layer Heights and Surface Meteorological Variables in the Columbia River Gorge and Basin During the Second Wind Forecast Improvement Project

The second Wind Forecast Improvement Project (WFIP2) is an 18-month field campaign in the Pacific Northwest U.S.A., whose goal is to improve the accuracy of numerical-weather-prediction forecasts in complex terrain. The WFIP2 campaign involved the deployment of a large suite of in situ and remote sensing instrumentation, including eight 915-MHz wind-profiling radars, and surface meteorological stations. The evolution and annual variability of the daytime convective planetary-boundary-layer (PBL) height is investigated using the wind-profiling radars. Three models with different horizontal grid spacing are evaluated: the Rapid Refresh, the High-Resolution Rapid Refresh, and its nested version. The results are used to assess errors in the prediction of PBL height within the experimental and control versions of the models, with the experimental versions including changes and additions to the model parametrizations developed during the field campaign, and the control version using the parametrizations present in the National Oceanic and Atmospheric Administration/National Centers for Environmental Prediction operational version of the models at the start of the project. Results show that the high-resolution models outperform the low-resolution versions, the experimental versions perform better compared with the control versions, model PBL height estimations are more accurate on cloud-free days, and model estimates of the PBL height growth rate are more accurate than model estimates of the rate of decay. Finally, using surface sensors, we assess surface meteorological variables, finding improved surface irradiance and, to a lesser extent, improved 2-m temperature in the experimental version of the model.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

Validating simulated mountain wave impacts on hub-height wind speed using SoDAR observations

The ascent of stably stratified air over a mountain barrier can trigger the generation of mountain waves. Mountain waves occur frequently over the Columbia River Gorge in western North America and can impact wind power generation over the area. Therefore, predicting the details of mountain waves events (e.g., dominant wavelength, timing, and duration) can be very valuable for the wind energy community. In this study, the ability of the Weather Research and Forecasting (WRF) model to simulate mountain waves and their impact on hub-height wind speed is investigated. Our results suggest that the WRF model has moderate skill in simulating observed mountain wave. Further, given WRF predictions of wavelength range and wave period, the Fast Fourier Transform can calculate the simulated mountain wave impact on hub-height wind speed. The resulting wind speeds agree well with SoDAR observations in terms of both magnitude and pattern. Finally, for the simulated cases, WRF consistently predicts impacts of significant mountain wave events about an hour earlier than the actual observations. Overall, in this work, the sensitivities as well as uncertainties associated with our methodology are discussed in detail.

17 WIND ENERGY↗
DOE OSTI2025

Volumetric Shaping of Nanoparticle-DNA Crystals by Light-Induced Milling

DNA-programmable self-assembly enables the formation of nanoparticle crystals with controlled lattice symmetry. While this approach offers the formation of complexly ordered nanostructures for optical, mechanical, and biological applications, a mesoscale control over such nanomaterials is limited. Directing the material formation process through the assembly pathway or external fields allows for modulating crystal morphology, but achieving arbitrary morphology remains challenging. Here, we present a photothermal method for shaping 3D DNA-programmable crystals of gold nanoparticles. Through local heating of nanoparticles due to plasmonic light absorption, we induce targeted volumetric dissolution of specifically defined crystal areas with micron-scale accuracy. This technique effectively prescribes crystal shaping and creates arbitrarily shaped voids within crystals. We further investigate both computationally and experimentally the key factors governing volumetric material subtraction. The developed automated light-milling platform enables the fabrication of nanomaterials exhibiting both DNA-programmable nanoscale order and custom-designed mesoscale architecture.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Sensitivity Analysis of Wind and Turbulence Predictions With Mesoscale‐Coupled Large Eddy Simulations Using Ensemble Machine Learning

Abstract Coupling between mesoscale models and large‐eddy simulation (LES) models is increasingly used to more realistically represent the wide range of scales of atmospheric motions affecting boundary layer winds and turbulence that need to be simulated accurately for applications such as wind energy. However, such mesoscale‐to‐microscale coupled modeling frameworks are potentially affected by a large number of uncertain closure parameters. Here, we investigate the sensitivity associated with six closure parameters related to a 1.5‐order subgrid‐scale turbulence closure for an ensemble of mesoscale‐coupled LES. The simulations are performed using the Weather Research and Forecasting model nested from horizontal resolutions of greater than a kilometer down to tens of meters. Closure parameters are varied to generate perturbed parameter ensembles for two case studies of highly sheared, convective boundary layers observed in the Columbia Basin of Oregon and Washington during the Second Wind Forecast Improvement Project. Machine learning algorithms are used to explore the sensitivity of LES predictions, considering the effects of the perturbed physical parameters alongside categorical factors such as the case study identity, measurement location, and LES resolution. For the conditions we examine, a single parameter, the eddy viscosity coefficient, is the dominant source of parametric sensitivity and its importance is comparable to the categorical factors for several of the simulation response variables we examine.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

On the transferability of residence time distributions in two 10-km long river sections with similar hydromorphic units

Quantifying hydrologic exchange fluxes (HEFs) at the stream-groundwater interface and their residence time distributions (RTDs) in the subsurface are important for managing the water quality and ecosystem health in dynamic river corridors. However, direct simulating high-spatial resolution HEFs and RTDs can be time-consuming, especially for watershed-scale modeling. Efficient surrogate models linking RTDs to hydromorphic units (HUs) can be alternatives for simulating RTDs in large-scale models. A common concern of these surrogate models, though, is the transferability of the relationship between the RTDs and HUs from one river corridor to another. To address this issue, this work evaluates the HEFs and resulting RTD-HU relationships for two 10-km long river corridors along the Columbia River leveraging a one-way coupled three-dimensional transient surface-subsurface water transport modeling framework we previously developed. Applying such a framework at the two river corridors with similar HUs allows for quantitative comparisons of HEFs and RTDs using both statistical tests and machine learning classification models. Finally, our comparison shows that the similarity and transferability of the RTD-HU relationship is very low for the two investigated river sections, which suggests that devising a general algorithm to estimate RTDs based solely on surface water hydrodynamics and short-distance river channel topography data, as well as HU classification, might be nearly impossible.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Genomic insights into local adaptation and migration success in reintroduced Coho Salmon of the Wenatchee River basin

ABSTRACT Objective Reintroduction of salmonids into regions where they have been extirpated is a common conservation strategy that is often implemented through natural recolonization, translocation of natural populations, or hatchery-based programs. Locally adapting to specific environmental conditions is critical for long-term population viability, particularly for species like Coho Salmon Oncorhynchus kisutch, which face diverse selective pressures during their migration. This study focused on the mid-Columbia River Coho Salmon reintroduction program managed by Yakama Nation Fisheries, which has successfully reintroduced Coho Salmon into the Wenatchee and Methow River basins, Washington. Notably, these populations have adapted to the longer migration route than those in the founding stock, with selection favoring individuals with an earlier arrival time and that can navigate a 15-km, high-gradient canyon to reach optimal spawning grounds. The objectives of this study were to investigate whether specific genomic regions are under selection for traits associated with return location and timing in Coho Salmon. Methods Low-coverage whole-genome resequencing data were used to screen for genomic regions associated with the phenotypes of interest. Results A weak polygenic signal in female Coho Salmon was found to be associated with return group, with a subset of candidate adaptive regions occurring across eight chromosomes. Conclusions These findings provide insights into the genomic mechanisms underlying local adaptation in reintroduced salmon populations and inform broodstock selection strategies aimed at promoting natural production and long-term population sustainability.

Horn, Rebekah L.↗
DOE OSTI2026

Shower Reconstruction for Cross-Section Measurements with Photon(s) in the Final State at SBND

The Short-Baseline Near Detector (SBND) is a 112-ton liquid argon time projection chamber operating in the Booster Neutrino Beam at Fermilab as part of the Short-Baseline Neutrino Program. Precise reconstruction of electromagnetic showers from photons and electrons is essential for searches for neutrino oscillations, cross-section measurements, and rare-process studies in liquid argon. In this poster, we present a unified set of SBND analyses enabled by the SPINE (Scalable Particle Imaging with Neural Embeddings) end-to-end machine-learning–based reconstruction framework, highlighting charged-current neutral pion (CC π⁰) production and neutral-current (NC) Δ radiative decay as complementary physics cases. Charged-current π⁰ interactions provide a high-statistics benchmark for validating photon reconstruction, constraining the electromagnetic energy scale, and modeling backgrounds to other cross-section measurements and BSM searches with one or more photons in the final state. We summarize progress toward the ongoing development of a CC π⁰ selection in SBND and, report on the current status of a search for NC resonant Δ production followed by radiative decay (Δ→Nγ) in SBND. This rare process, previously investigated in MicroBooNE, provides a stringent test of photon-only final-state reconstruction and is of interest in the context of the MiniBooNE low-energy excess. Together, these analyses demonstrate how modern machine-learning–based shower reconstruction enables a diverse and scalable physics program at SBND.

Chung, Seokju [Nevis Labs, Columbia U.]↗
DOE OSTI2025

Encoding hierarchical 3D architecture through inverse design of programmable bonds

The ability to fabricate materials and devices at small scales by design has resulted in tremendous technological progress. However, the need for engineered three-dimensional (3D) nanoscale materials requires new strategies for organizing nanocomponents. Here we demonstrate an inverse design approach for the assembly of nanoparticles into hierarchically ordered 3D organizations using DNA voxels with directional, addressable bonds. By identifying intrinsic symmetries in repeating mesoscale structural motifs, we prescribe a set of voxels, termed a mesovoxel, that are assembled into target 3D crystals. The relationship between different degrees of encoded information used for voxel bonds and the fidelity of assembly is investigated using experimental and computational methods. We apply this assembly strategy to create periodic 3D nanoparticle ordered organizations, including structures with low-dimensional elements, helical motifs, a nanoscale analogue of a face-centred perovskite crystal and a distributed Bragg reflector based on a crystal with plasmonic and photonic length-scale regimes.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Sensitivity of magnetic islands in permanent magnet stellarators using the gradient and Hessian methods

Stellarator plasmas are known to be very sensitive to perturbations in the magnetic field. The permanent magnet stellarator was in part developed as a solution to high machining tolerances placed on the shape properties of electromagnetic coils in traditional stellarators. However, as a consequence of this high sensitivity to the field structure, sensitivities of permanent magnet stellarator plasmas to perturbations of permanent magnet properties must necessarily be well-understood. The gradient and Hessian matrix methods have been previously demonstrated to be useful sensitivity analysis methods for modular coils. We apply these two methods to the study of island width sensitivities in both the MUSE and PM4STELL permanent magnet stellarator projects. These sensitivity methods were used to determine the relative impacts of permanent magnet parameter perturbations on island widths in the vacuum field approximation of both stellarator equilibria. The square of resonant magnetic field perturbation is used here as a proxy for island width. In particular, gradients of magnetizations of individual magnets were examined in MUSE, as well as gradients of magnet group displacements informed by device design. Three different forms of permanent magnet magnetization perturbations are investigated for MUSE, and the flux surface response to perturbations is demonstrated. The Hessian matrix method is applied to PM4STELL, illustrating the sensitivity of dominant island widths to displacements of toroidal wedge structures. These methods allow for selective direction of experimental resources toward regions of heightened sensitivity, while constraints on less impactful permanent magnet parameters can be relaxed.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗