Results for “Complex reflection coefficients” — Page 3

DOE OSTI2017

Experimental development of low-frequency shear modulus and attenuation measurements in mated rock fractures: Shear mechanics due to asperity contact area changes with normal stress

Reservoir core measurements can help guide seismic monitoring of fluid-induced pressure variations in tight fractured reservoirs including those targeted for supercritical CO 2 injection. We present the first seismic-frequency ‘room-dry’ measurements of fracture specific shear stiffness, using artificially fractured standard granite samples with different degrees of mating, a well-mated tensile fracture from a dolomite reservoir core, as well as simple roughened polymethyl methacrylate (PMMA) surfaces. We have adapted a low-frequency (0.01 to 100 Hz) shear modulus and attenuation apparatus to explore the seismic signature of fractures and understand the mechanics of asperity contacts under a range of normal stress conditions. Our instrument is unique in its ability to measure at low normal stresses (0.5 – 20 MPa), simulating 'open' fractures in shallow or high fluid pressure reservoirs. The accuracy of our instrument is demonstrated by calibration and comparison to ultrasonic measurements and low-frequency direct shear measurements of intact samples from the literature. Pressure sensitive film was used to measure real contact area of the fracture surfaces. The fractured shear modulus for the majority of the samples shows an exponential dependence on real contact area. A simple numerical model, with one bonded circular asperity, predicts this behavior and matches the data for the simple PMMA surfaces. The rock surfaces reach their intact moduli at lower contact area than the model predicts, likely due to more complex geometry. Lastly, we apply our results to a Linear-Slip Interface Model to estimate reflection coefficients and calculate shear wave time delays due to the lower wave velocities through the fractured zone. We find that cross-well surveys could detect even well-mated hard rock fractures assuming the availability of high repeatability acquisition systems.

58 GEOSCIENCES↗

NASA NTRS1977

Mathematical models for the reflection coefficients of lossy dielectric half-spaces with application to transient responses of chirped pulses

Reflection coefficients are found at normal incidence for a large class of homogeneous lossy half-spaces with a one-dimensionally inhomogeneous or stratified lossy layer on top. Solutions are in terms of Hankel functions of complex argument to decrease cancellation error at high frequencies. One special case is that of layers on a homogeneous half-space where the dielectric constant in each layer may vary in a quite general manner. A Wronskian is used to insure the critical computations are correct. The reflection of chirped pulses is considered. Solutions are obtained by applying the fast Fourier transform. It is found that for a typical relatively long normalized 'long' pulse the power reflected as a function of time is essentially the power reflection coefficient for the frequencies swept out, whereas for a relatively short 'long' pulse, with the same relative change in frequency and the same number of oscillations there is only the uniform attenuation by the power reflection coefficient of the center frequency. By a 'long' pulse we mean a pulse whose spatial length is long compared to the thickness of the reflecting layer.

Evans, D. D.↗

DOE OSTI2021

xsacrcfrspccopol (a1)

ARM's scanning cloud radars are fully coherent dual-frequency, dual-polarization Doppler radars mounted on a common scanning pedestal. Each pedestal includes a Ka-band radar (2kW peak power) and the deployment location determines whether the second radar is a W-band (WSACR; 1.7 kW peak power) or X-band (XSACR; 20 kW peak power). At ARM's tropical sites, X-band radars are paired with the Ka-band because they are better suited for the atmospheric attenuation in this region. Beamwidth for the X-band is approximately 1 degree, and the Ka-band beamwidth is roughly 0.3 degrees. Due to the narrow antenna beamwidth, ARM’s scanning cloud radars use scanning strategies unlike typical weather radars. Rather than focusing on plan position indicator, or PPI, scans, the XSACR uses range height indicator, or RHI, scans at numerous azimuths to obtain cloud volume data. For the second ARM Mobile Facility (AMF2), the XSACR can be dismounted from the pedestal it shares with the KASACR and mounted on a separate pedestal. This allows the XSACR to operate more like a weather (precipitation) radar in deployments where such local coverage is lacking. Measurements collected with the XSACR are copolar and cross-polar radar reflectivity, Doppler velocity, spectra width and spectra when not scanning, differential Reflectivity (Zdr), correlation coefficient (rho-hv), and specific differential phase (phi-dp). XSACR data from the 2018–2019 Cloud, Aerosol, and Complex Terrain Interactions (CACTI) field campaign in Argentina are now available as b1-level products. Building on the original CACTI operational data, the b1-level products feature improved data quality resulting from extensive analyses and corrections. The data are cross-calibrated to a common point, datastreams are corrected for operational issues that occurred during the campaign, and several data quality masks and basic derived products are incorporated. For more information, read the CACTI radar b1-level processing report.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2021

xsacrcfrspcxpol (a1)

ARM's scanning cloud radars are fully coherent dual-frequency, dual-polarization Doppler radars mounted on a common scanning pedestal. Each pedestal includes a Ka-band radar (2kW peak power) and the deployment location determines whether the second radar is a W-band (WSACR; 1.7 kW peak power) or X-band (XSACR; 20 kW peak power). At ARM's tropical sites, X-band radars are paired with the Ka-band because they are better suited for the atmospheric attenuation in this region. Beamwidth for the X-band is approximately 1 degree, and the Ka-band beamwidth is roughly 0.3 degrees. Due to the narrow antenna beamwidth, ARM’s scanning cloud radars use scanning strategies unlike typical weather radars. Rather than focusing on plan position indicator, or PPI, scans, the XSACR uses range height indicator, or RHI, scans at numerous azimuths to obtain cloud volume data. For the second ARM Mobile Facility (AMF2), the XSACR can be dismounted from the pedestal it shares with the KASACR and mounted on a separate pedestal. This allows the XSACR to operate more like a weather (precipitation) radar in deployments where such local coverage is lacking. Measurements collected with the XSACR are copolar and cross-polar radar reflectivity, Doppler velocity, spectra width and spectra when not scanning, differential Reflectivity (Zdr), correlation coefficient (rho-hv), and specific differential phase (phi-dp). XSACR data from the 2018–2019 Cloud, Aerosol, and Complex Terrain Interactions (CACTI) field campaign in Argentina are now available as b1-level products. Building on the original CACTI operational data, the b1-level products feature improved data quality resulting from extensive analyses and corrections. The data are cross-calibrated to a common point, datastreams are corrected for operational issues that occurred during the campaign, and several data quality masks and basic derived products are incorporated. For more information, read the CACTI radar b1-level processing report.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2021

xsacrcfrspccross (a1)

ARM's scanning cloud radars are fully coherent dual-frequency, dual-polarization Doppler radars mounted on a common scanning pedestal. Each pedestal includes a Ka-band radar (2kW peak power) and the deployment location determines whether the second radar is a W-band (WSACR; 1.7 kW peak power) or X-band (XSACR; 20 kW peak power). At ARM's tropical sites, X-band radars are paired with the Ka-band because they are better suited for the atmospheric attenuation in this region. Beamwidth for the X-band is approximately 1 degree, and the Ka-band beamwidth is roughly 0.3 degrees. Due to the narrow antenna beamwidth, ARM’s scanning cloud radars use scanning strategies unlike typical weather radars. Rather than focusing on plan position indicator, or PPI, scans, the XSACR uses range height indicator, or RHI, scans at numerous azimuths to obtain cloud volume data. For the second ARM Mobile Facility (AMF2), the XSACR can be dismounted from the pedestal it shares with the KASACR and mounted on a separate pedestal. This allows the XSACR to operate more like a weather (precipitation) radar in deployments where such local coverage is lacking. Measurements collected with the XSACR are copolar and cross-polar radar reflectivity, Doppler velocity, spectra width and spectra when not scanning, differential Reflectivity (Zdr), correlation coefficient (rho-hv), and specific differential phase (phi-dp). XSACR data from the 2018–2019 Cloud, Aerosol, and Complex Terrain Interactions (CACTI) field campaign in Argentina are now available as b1-level products. Building on the original CACTI operational data, the b1-level products feature improved data quality resulting from extensive analyses and corrections. The data are cross-calibrated to a common point, datastreams are corrected for operational issues that occurred during the campaign, and several data quality masks and basic derived products are incorporated. For more information, read the CACTI radar b1-level processing report.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2019

xsacrcfrmfpt (a1)

ARM's scanning cloud radars are fully coherent dual-frequency, dual-polarization Doppler radars mounted on a common scanning pedestal. Each pedestal includes a Ka-band radar (2kW peak power) and the deployment location determines whether the second radar is a W-band (WSACR; 1.7 kW peak power) or X-band (XSACR; 20 kW peak power). At ARM's tropical sites, X-band radars are paired with the Ka-band because they are better suited for the atmospheric attenuation in this region. Beamwidth for the X-band is approximately 1 degree, and the Ka-band beamwidth is roughly 0.3 degrees. Due to the narrow antenna beamwidth, ARM’s scanning cloud radars use scanning strategies unlike typical weather radars. Rather than focusing on plan position indicator, or PPI, scans, the XSACR uses range height indicator, or RHI, scans at numerous azimuths to obtain cloud volume data. For the second ARM Mobile Facility (AMF2), the XSACR can be dismounted from the pedestal it shares with the KASACR and mounted on a separate pedestal. This allows the XSACR to operate more like a weather (precipitation) radar in deployments where such local coverage is lacking. Measurements collected with the XSACR are copolar and cross-polar radar reflectivity, Doppler velocity, spectra width and spectra when not scanning, differential Reflectivity (Zdr), correlation coefficient (rho-hv), and specific differential phase (phi-dp). XSACR data from the 2018–2019 Cloud, Aerosol, and Complex Terrain Interactions (CACTI) field campaign in Argentina are now available as b1-level products. Building on the original CACTI operational data, the b1-level products feature improved data quality resulting from extensive analyses and corrections. The data are cross-calibrated to a common point, datastreams are corrected for operational issues that occurred during the campaign, and several data quality masks and basic derived products are incorporated. For more information, read the CACTI radar b1-level processing report.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2018

xsacrcfrppiv (a1)

ARM's scanning cloud radars are fully coherent dual-frequency, dual-polarization Doppler radars mounted on a common scanning pedestal. Each pedestal includes a Ka-band radar (2kW peak power) and the deployment location determines whether the second radar is a W-band (WSACR; 1.7 kW peak power) or X-band (XSACR; 20 kW peak power). At ARM's tropical sites, X-band radars are paired with the Ka-band because they are better suited for the atmospheric attenuation in this region. Beamwidth for the X-band is approximately 1 degree, and the Ka-band beamwidth is roughly 0.3 degrees. Due to the narrow antenna beamwidth, ARM’s scanning cloud radars use scanning strategies unlike typical weather radars. Rather than focusing on plan position indicator, or PPI, scans, the XSACR uses range height indicator, or RHI, scans at numerous azimuths to obtain cloud volume data. For the second ARM Mobile Facility (AMF2), the XSACR can be dismounted from the pedestal it shares with the KASACR and mounted on a separate pedestal. This allows the XSACR to operate more like a weather (precipitation) radar in deployments where such local coverage is lacking. Measurements collected with the XSACR are copolar and cross-polar radar reflectivity, Doppler velocity, spectra width and spectra when not scanning, differential Reflectivity (Zdr), correlation coefficient (rho-hv), and specific differential phase (phi-dp). XSACR data from the 2018–2019 Cloud, Aerosol, and Complex Terrain Interactions (CACTI) field campaign in Argentina are now available as b1-level products. Building on the original CACTI operational data, the b1-level products feature improved data quality resulting from extensive analyses and corrections. The data are cross-calibrated to a common point, datastreams are corrected for operational issues that occurred during the campaign, and several data quality masks and basic derived products are incorporated. For more information, read the CACTI radar b1-level processing report.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2018

xsacrcfrcrras (a1)

ARM's scanning cloud radars are fully coherent dual-frequency, dual-polarization Doppler radars mounted on a common scanning pedestal. Each pedestal includes a Ka-band radar (2kW peak power) and the deployment location determines whether the second radar is a W-band (WSACR; 1.7 kW peak power) or X-band (XSACR; 20 kW peak power). At ARM's tropical sites, X-band radars are paired with the Ka-band because they are better suited for the atmospheric attenuation in this region. Beamwidth for the X-band is approximately 1 degree, and the Ka-band beamwidth is roughly 0.3 degrees. Due to the narrow antenna beamwidth, ARM’s scanning cloud radars use scanning strategies unlike typical weather radars. Rather than focusing on plan position indicator, or PPI, scans, the XSACR uses range height indicator, or RHI, scans at numerous azimuths to obtain cloud volume data. For the second ARM Mobile Facility (AMF2), the XSACR can be dismounted from the pedestal it shares with the KASACR and mounted on a separate pedestal. This allows the XSACR to operate more like a weather (precipitation) radar in deployments where such local coverage is lacking. Measurements collected with the XSACR are copolar and cross-polar radar reflectivity, Doppler velocity, spectra width and spectra when not scanning, differential Reflectivity (Zdr), correlation coefficient (rho-hv), and specific differential phase (phi-dp). XSACR data from the 2018–2019 Cloud, Aerosol, and Complex Terrain Interactions (CACTI) field campaign in Argentina are now available as b1-level products. Building on the original CACTI operational data, the b1-level products feature improved data quality resulting from extensive analyses and corrections. The data are cross-calibrated to a common point, datastreams are corrected for operational issues that occurred during the campaign, and several data quality masks and basic derived products are incorporated. For more information, read the CACTI radar b1-level processing report.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2018

xsacrcfrrhi (a1)

ARM's scanning cloud radars are fully coherent dual-frequency, dual-polarization Doppler radars mounted on a common scanning pedestal. Each pedestal includes a Ka-band radar (2kW peak power) and the deployment location determines whether the second radar is a W-band (WSACR; 1.7 kW peak power) or X-band (XSACR; 20 kW peak power). At ARM's tropical sites, X-band radars are paired with the Ka-band because they are better suited for the atmospheric attenuation in this region. Beamwidth for the X-band is approximately 1 degree, and the Ka-band beamwidth is roughly 0.3 degrees. Due to the narrow antenna beamwidth, ARM’s scanning cloud radars use scanning strategies unlike typical weather radars. Rather than focusing on plan position indicator, or PPI, scans, the XSACR uses range height indicator, or RHI, scans at numerous azimuths to obtain cloud volume data. For the second ARM Mobile Facility (AMF2), the XSACR can be dismounted from the pedestal it shares with the KASACR and mounted on a separate pedestal. This allows the XSACR to operate more like a weather (precipitation) radar in deployments where such local coverage is lacking. Measurements collected with the XSACR are copolar and cross-polar radar reflectivity, Doppler velocity, spectra width and spectra when not scanning, differential Reflectivity (Zdr), correlation coefficient (rho-hv), and specific differential phase (phi-dp). XSACR data from the 2018–2019 Cloud, Aerosol, and Complex Terrain Interactions (CACTI) field campaign in Argentina are now available as b1-level products. Building on the original CACTI operational data, the b1-level products feature improved data quality resulting from extensive analyses and corrections. The data are cross-calibrated to a common point, datastreams are corrected for operational issues that occurred during the campaign, and several data quality masks and basic derived products are incorporated. For more information, read the CACTI radar b1-level processing report.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2018

xsacrcfrslr (a1)

ARM's scanning cloud radars are fully coherent dual-frequency, dual-polarization Doppler radars mounted on a common scanning pedestal. Each pedestal includes a Ka-band radar (2kW peak power) and the deployment location determines whether the second radar is a W-band (WSACR; 1.7 kW peak power) or X-band (XSACR; 20 kW peak power). At ARM's tropical sites, X-band radars are paired with the Ka-band because they are better suited for the atmospheric attenuation in this region. Beamwidth for the X-band is approximately 1 degree, and the Ka-band beamwidth is roughly 0.3 degrees. Due to the narrow antenna beamwidth, ARM’s scanning cloud radars use scanning strategies unlike typical weather radars. Rather than focusing on plan position indicator, or PPI, scans, the XSACR uses range height indicator, or RHI, scans at numerous azimuths to obtain cloud volume data. For the second ARM Mobile Facility (AMF2), the XSACR can be dismounted from the pedestal it shares with the KASACR and mounted on a separate pedestal. This allows the XSACR to operate more like a weather (precipitation) radar in deployments where such local coverage is lacking. Measurements collected with the XSACR are copolar and cross-polar radar reflectivity, Doppler velocity, spectra width and spectra when not scanning, differential Reflectivity (Zdr), correlation coefficient (rho-hv), and specific differential phase (phi-dp). XSACR data from the 2018–2019 Cloud, Aerosol, and Complex Terrain Interactions (CACTI) field campaign in Argentina are now available as b1-level products. Building on the original CACTI operational data, the b1-level products feature improved data quality resulting from extensive analyses and corrections. The data are cross-calibrated to a common point, datastreams are corrected for operational issues that occurred during the campaign, and several data quality masks and basic derived products are incorporated. For more information, read the CACTI radar b1-level processing report.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2018

xsacrcfrhsrhi (a1)

ARM's scanning cloud radars are fully coherent dual-frequency, dual-polarization Doppler radars mounted on a common scanning pedestal. Each pedestal includes a Ka-band radar (2kW peak power) and the deployment location determines whether the second radar is a W-band (WSACR; 1.7 kW peak power) or X-band (XSACR; 20 kW peak power). At ARM's tropical sites, X-band radars are paired with the Ka-band because they are better suited for the atmospheric attenuation in this region. Beamwidth for the X-band is approximately 1 degree, and the Ka-band beamwidth is roughly 0.3 degrees. Due to the narrow antenna beamwidth, ARM’s scanning cloud radars use scanning strategies unlike typical weather radars. Rather than focusing on plan position indicator, or PPI, scans, the XSACR uses range height indicator, or RHI, scans at numerous azimuths to obtain cloud volume data. For the second ARM Mobile Facility (AMF2), the XSACR can be dismounted from the pedestal it shares with the KASACR and mounted on a separate pedestal. This allows the XSACR to operate more like a weather (precipitation) radar in deployments where such local coverage is lacking. Measurements collected with the XSACR are copolar and cross-polar radar reflectivity, Doppler velocity, spectra width and spectra when not scanning, differential Reflectivity (Zdr), correlation coefficient (rho-hv), and specific differential phase (phi-dp). XSACR data from the 2018–2019 Cloud, Aerosol, and Complex Terrain Interactions (CACTI) field campaign in Argentina are now available as b1-level products. Building on the original CACTI operational data, the b1-level products feature improved data quality resulting from extensive analyses and corrections. The data are cross-calibrated to a common point, datastreams are corrected for operational issues that occurred during the campaign, and several data quality masks and basic derived products are incorporated. For more information, read the CACTI radar b1-level processing report.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2015

xsacrppiaux (a0)

ARM's scanning cloud radars are fully coherent dual-frequency, dual-polarization Doppler radars mounted on a common scanning pedestal. Each pedestal includes a Ka-band radar (2kW peak power) and the deployment location determines whether the second radar is a W-band (WSACR; 1.7 kW peak power) or X-band (XSACR; 20 kW peak power). At ARM's tropical sites, X-band radars are paired with the Ka-band because they are better suited for the atmospheric attenuation in this region. Beamwidth for the X-band is approximately 1 degree, and the Ka-band beamwidth is roughly 0.3 degrees. Due to the narrow antenna beamwidth, ARM’s scanning cloud radars use scanning strategies unlike typical weather radars. Rather than focusing on plan position indicator, or PPI, scans, the XSACR uses range height indicator, or RHI, scans at numerous azimuths to obtain cloud volume data. For the second ARM Mobile Facility (AMF2), the XSACR can be dismounted from the pedestal it shares with the KASACR and mounted on a separate pedestal. This allows the XSACR to operate more like a weather (precipitation) radar in deployments where such local coverage is lacking. Measurements collected with the XSACR are copolar and cross-polar radar reflectivity, Doppler velocity, spectra width and spectra when not scanning, differential Reflectivity (Zdr), correlation coefficient (rho-hv), and specific differential phase (phi-dp). XSACR data from the 2018–2019 Cloud, Aerosol, and Complex Terrain Interactions (CACTI) field campaign in Argentina are now available as b1-level products. Building on the original CACTI operational data, the b1-level products feature improved data quality resulting from extensive analyses and corrections. The data are cross-calibrated to a common point, datastreams are corrected for operational issues that occurred during the campaign, and several data quality masks and basic derived products are incorporated. For more information, read the CACTI radar b1-level processing report.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2015

xsacrvptaux (a0)

ARM's scanning cloud radars are fully coherent dual-frequency, dual-polarization Doppler radars mounted on a common scanning pedestal. Each pedestal includes a Ka-band radar (2kW peak power) and the deployment location determines whether the second radar is a W-band (WSACR; 1.7 kW peak power) or X-band (XSACR; 20 kW peak power). At ARM's tropical sites, X-band radars are paired with the Ka-band because they are better suited for the atmospheric attenuation in this region. Beamwidth for the X-band is approximately 1 degree, and the Ka-band beamwidth is roughly 0.3 degrees. Due to the narrow antenna beamwidth, ARM’s scanning cloud radars use scanning strategies unlike typical weather radars. Rather than focusing on plan position indicator, or PPI, scans, the XSACR uses range height indicator, or RHI, scans at numerous azimuths to obtain cloud volume data. For the second ARM Mobile Facility (AMF2), the XSACR can be dismounted from the pedestal it shares with the KASACR and mounted on a separate pedestal. This allows the XSACR to operate more like a weather (precipitation) radar in deployments where such local coverage is lacking. Measurements collected with the XSACR are copolar and cross-polar radar reflectivity, Doppler velocity, spectra width and spectra when not scanning, differential Reflectivity (Zdr), correlation coefficient (rho-hv), and specific differential phase (phi-dp). XSACR data from the 2018–2019 Cloud, Aerosol, and Complex Terrain Interactions (CACTI) field campaign in Argentina are now available as b1-level products. Building on the original CACTI operational data, the b1-level products feature improved data quality resulting from extensive analyses and corrections. The data are cross-calibrated to a common point, datastreams are corrected for operational issues that occurred during the campaign, and several data quality masks and basic derived products are incorporated. For more information, read the CACTI radar b1-level processing report.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2015

xsacrrhiaux (a0)

ARM's scanning cloud radars are fully coherent dual-frequency, dual-polarization Doppler radars mounted on a common scanning pedestal. Each pedestal includes a Ka-band radar (2kW peak power) and the deployment location determines whether the second radar is a W-band (WSACR; 1.7 kW peak power) or X-band (XSACR; 20 kW peak power). At ARM's tropical sites, X-band radars are paired with the Ka-band because they are better suited for the atmospheric attenuation in this region. Beamwidth for the X-band is approximately 1 degree, and the Ka-band beamwidth is roughly 0.3 degrees. Due to the narrow antenna beamwidth, ARM’s scanning cloud radars use scanning strategies unlike typical weather radars. Rather than focusing on plan position indicator, or PPI, scans, the XSACR uses range height indicator, or RHI, scans at numerous azimuths to obtain cloud volume data. For the second ARM Mobile Facility (AMF2), the XSACR can be dismounted from the pedestal it shares with the KASACR and mounted on a separate pedestal. This allows the XSACR to operate more like a weather (precipitation) radar in deployments where such local coverage is lacking. Measurements collected with the XSACR are copolar and cross-polar radar reflectivity, Doppler velocity, spectra width and spectra when not scanning, differential Reflectivity (Zdr), correlation coefficient (rho-hv), and specific differential phase (phi-dp). XSACR data from the 2018–2019 Cloud, Aerosol, and Complex Terrain Interactions (CACTI) field campaign in Argentina are now available as b1-level products. Building on the original CACTI operational data, the b1-level products feature improved data quality resulting from extensive analyses and corrections. The data are cross-calibrated to a common point, datastreams are corrected for operational issues that occurred during the campaign, and several data quality masks and basic derived products are incorporated. For more information, read the CACTI radar b1-level processing report.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2015

xsacrblrhiaux (a0)

ARM's scanning cloud radars are fully coherent dual-frequency, dual-polarization Doppler radars mounted on a common scanning pedestal. Each pedestal includes a Ka-band radar (2kW peak power) and the deployment location determines whether the second radar is a W-band (WSACR; 1.7 kW peak power) or X-band (XSACR; 20 kW peak power). At ARM's tropical sites, X-band radars are paired with the Ka-band because they are better suited for the atmospheric attenuation in this region. Beamwidth for the X-band is approximately 1 degree, and the Ka-band beamwidth is roughly 0.3 degrees. Due to the narrow antenna beamwidth, ARM’s scanning cloud radars use scanning strategies unlike typical weather radars. Rather than focusing on plan position indicator, or PPI, scans, the XSACR uses range height indicator, or RHI, scans at numerous azimuths to obtain cloud volume data. For the second ARM Mobile Facility (AMF2), the XSACR can be dismounted from the pedestal it shares with the KASACR and mounted on a separate pedestal. This allows the XSACR to operate more like a weather (precipitation) radar in deployments where such local coverage is lacking. Measurements collected with the XSACR are copolar and cross-polar radar reflectivity, Doppler velocity, spectra width and spectra when not scanning, differential Reflectivity (Zdr), correlation coefficient (rho-hv), and specific differential phase (phi-dp). XSACR data from the 2018–2019 Cloud, Aerosol, and Complex Terrain Interactions (CACTI) field campaign in Argentina are now available as b1-level products. Building on the original CACTI operational data, the b1-level products feature improved data quality resulting from extensive analyses and corrections. The data are cross-calibrated to a common point, datastreams are corrected for operational issues that occurred during the campaign, and several data quality masks and basic derived products are incorporated. For more information, read the CACTI radar b1-level processing report.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2015

xsacrawrhiaux (a0)

ARM's scanning cloud radars are fully coherent dual-frequency, dual-polarization Doppler radars mounted on a common scanning pedestal. Each pedestal includes a Ka-band radar (2kW peak power) and the deployment location determines whether the second radar is a W-band (WSACR; 1.7 kW peak power) or X-band (XSACR; 20 kW peak power). At ARM's tropical sites, X-band radars are paired with the Ka-band because they are better suited for the atmospheric attenuation in this region. Beamwidth for the X-band is approximately 1 degree, and the Ka-band beamwidth is roughly 0.3 degrees. Due to the narrow antenna beamwidth, ARM’s scanning cloud radars use scanning strategies unlike typical weather radars. Rather than focusing on plan position indicator, or PPI, scans, the XSACR uses range height indicator, or RHI, scans at numerous azimuths to obtain cloud volume data. For the second ARM Mobile Facility (AMF2), the XSACR can be dismounted from the pedestal it shares with the KASACR and mounted on a separate pedestal. This allows the XSACR to operate more like a weather (precipitation) radar in deployments where such local coverage is lacking. Measurements collected with the XSACR are copolar and cross-polar radar reflectivity, Doppler velocity, spectra width and spectra when not scanning, differential Reflectivity (Zdr), correlation coefficient (rho-hv), and specific differential phase (phi-dp). XSACR data from the 2018–2019 Cloud, Aerosol, and Complex Terrain Interactions (CACTI) field campaign in Argentina are now available as b1-level products. Building on the original CACTI operational data, the b1-level products feature improved data quality resulting from extensive analyses and corrections. The data are cross-calibrated to a common point, datastreams are corrected for operational issues that occurred during the campaign, and several data quality masks and basic derived products are incorporated. For more information, read the CACTI radar b1-level processing report.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2015

xsacrcwrhiaux (a0)

ARM's scanning cloud radars are fully coherent dual-frequency, dual-polarization Doppler radars mounted on a common scanning pedestal. Each pedestal includes a Ka-band radar (2kW peak power) and the deployment location determines whether the second radar is a W-band (WSACR; 1.7 kW peak power) or X-band (XSACR; 20 kW peak power). At ARM's tropical sites, X-band radars are paired with the Ka-band because they are better suited for the atmospheric attenuation in this region. Beamwidth for the X-band is approximately 1 degree, and the Ka-band beamwidth is roughly 0.3 degrees. Due to the narrow antenna beamwidth, ARM’s scanning cloud radars use scanning strategies unlike typical weather radars. Rather than focusing on plan position indicator, or PPI, scans, the XSACR uses range height indicator, or RHI, scans at numerous azimuths to obtain cloud volume data. For the second ARM Mobile Facility (AMF2), the XSACR can be dismounted from the pedestal it shares with the KASACR and mounted on a separate pedestal. This allows the XSACR to operate more like a weather (precipitation) radar in deployments where such local coverage is lacking. Measurements collected with the XSACR are copolar and cross-polar radar reflectivity, Doppler velocity, spectra width and spectra when not scanning, differential Reflectivity (Zdr), correlation coefficient (rho-hv), and specific differential phase (phi-dp). XSACR data from the 2018–2019 Cloud, Aerosol, and Complex Terrain Interactions (CACTI) field campaign in Argentina are now available as b1-level products. Building on the original CACTI operational data, the b1-level products feature improved data quality resulting from extensive analyses and corrections. The data are cross-calibrated to a common point, datastreams are corrected for operational issues that occurred during the campaign, and several data quality masks and basic derived products are incorporated. For more information, read the CACTI radar b1-level processing report.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2015

xsacrhsrhiaux (a0)

ARM's scanning cloud radars are fully coherent dual-frequency, dual-polarization Doppler radars mounted on a common scanning pedestal. Each pedestal includes a Ka-band radar (2kW peak power) and the deployment location determines whether the second radar is a W-band (WSACR; 1.7 kW peak power) or X-band (XSACR; 20 kW peak power). At ARM's tropical sites, X-band radars are paired with the Ka-band because they are better suited for the atmospheric attenuation in this region. Beamwidth for the X-band is approximately 1 degree, and the Ka-band beamwidth is roughly 0.3 degrees. Due to the narrow antenna beamwidth, ARM’s scanning cloud radars use scanning strategies unlike typical weather radars. Rather than focusing on plan position indicator, or PPI, scans, the XSACR uses range height indicator, or RHI, scans at numerous azimuths to obtain cloud volume data. For the second ARM Mobile Facility (AMF2), the XSACR can be dismounted from the pedestal it shares with the KASACR and mounted on a separate pedestal. This allows the XSACR to operate more like a weather (precipitation) radar in deployments where such local coverage is lacking. Measurements collected with the XSACR are copolar and cross-polar radar reflectivity, Doppler velocity, spectra width and spectra when not scanning, differential Reflectivity (Zdr), correlation coefficient (rho-hv), and specific differential phase (phi-dp). XSACR data from the 2018–2019 Cloud, Aerosol, and Complex Terrain Interactions (CACTI) field campaign in Argentina are now available as b1-level products. Building on the original CACTI operational data, the b1-level products feature improved data quality resulting from extensive analyses and corrections. The data are cross-calibrated to a common point, datastreams are corrected for operational issues that occurred during the campaign, and several data quality masks and basic derived products are incorporated. For more information, read the CACTI radar b1-level processing report.

54 ENVIRONMENTAL SCIENCES↗