Results for “Complex reflection coefficients” — Page 3

DOE OSTI2019

csapr2cfrmrhi (a1)

The C-Band Scanning ARM Precipitation Radar is a dual-polarization Doppler weather radar that operates in a simultaneous transmit and receive (STAR) mode, splitting the transmit signal so that power is transmitted on both horizontal and vertical polarizations at the same time. The CSAPR can also transmit on a single polarization (horizontal or vertical) and measure linear depolarization ratio (LDR). In addition to the first three Doppler moments (reflectivity, radial velocity, and spectra width), the CSAPR also provides differential reflectivity, correlation coefficient, and specific differential phase. The dual-polarization variables enable the provision of rainfall rate estimates and identification of precipitation types. For the 2018–2019 Cloud, Aerosol, and Complex Terrain Interactions (CACTI) field campaign in Argentina, ARM deployed a second-generation CSAPR, known as CSAPR2. CACTI data from the CSAPR2 are now available as b1-level products. Building on the original CACTI operational data, the b1-level products feature improved data quality resulting from extensive analyses and corrections. The data are cross-calibrated to a common point, datastreams are corrected for operational issues that occurred during the campaign, and several data quality masks and basic derived products are incorporated. For more information, read the CACTI radar b1-level processing report.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2018

csapr2cfrrhi (a1)

The C-Band Scanning ARM Precipitation Radar is a dual-polarization Doppler weather radar that operates in a simultaneous transmit and receive (STAR) mode, splitting the transmit signal so that power is transmitted on both horizontal and vertical polarizations at the same time. The CSAPR can also transmit on a single polarization (horizontal or vertical) and measure linear depolarization ratio (LDR). In addition to the first three Doppler moments (reflectivity, radial velocity, and spectra width), the CSAPR also provides differential reflectivity, correlation coefficient, and specific differential phase. The dual-polarization variables enable the provision of rainfall rate estimates and identification of precipitation types. For the 2018–2019 Cloud, Aerosol, and Complex Terrain Interactions (CACTI) field campaign in Argentina, ARM deployed a second-generation CSAPR, known as CSAPR2. CACTI data from the CSAPR2 are now available as b1-level products. Building on the original CACTI operational data, the b1-level products feature improved data quality resulting from extensive analyses and corrections. The data are cross-calibrated to a common point, datastreams are corrected for operational issues that occurred during the campaign, and several data quality masks and basic derived products are incorporated. For more information, read the CACTI radar b1-level processing report.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2018

csapr2cfrcrc (a1)

The C-Band Scanning ARM Precipitation Radar is a dual-polarization Doppler weather radar that operates in a simultaneous transmit and receive (STAR) mode, splitting the transmit signal so that power is transmitted on both horizontal and vertical polarizations at the same time. The CSAPR can also transmit on a single polarization (horizontal or vertical) and measure linear depolarization ratio (LDR). In addition to the first three Doppler moments (reflectivity, radial velocity, and spectra width), the CSAPR also provides differential reflectivity, correlation coefficient, and specific differential phase. The dual-polarization variables enable the provision of rainfall rate estimates and identification of precipitation types. For the 2018–2019 Cloud, Aerosol, and Complex Terrain Interactions (CACTI) field campaign in Argentina, ARM deployed a second-generation CSAPR, known as CSAPR2. CACTI data from the CSAPR2 are now available as b1-level products. Building on the original CACTI operational data, the b1-level products feature improved data quality resulting from extensive analyses and corrections. The data are cross-calibrated to a common point, datastreams are corrected for operational issues that occurred during the campaign, and several data quality masks and basic derived products are incorporated. For more information, read the CACTI radar b1-level processing report.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2018

csapr2cfrppi (a1)

The C-Band Scanning ARM Precipitation Radar is a dual-polarization Doppler weather radar that operates in a simultaneous transmit and receive (STAR) mode, splitting the transmit signal so that power is transmitted on both horizontal and vertical polarizations at the same time. The CSAPR can also transmit on a single polarization (horizontal or vertical) and measure linear depolarization ratio (LDR). In addition to the first three Doppler moments (reflectivity, radial velocity, and spectra width), the CSAPR also provides differential reflectivity, correlation coefficient, and specific differential phase. The dual-polarization variables enable the provision of rainfall rate estimates and identification of precipitation types. For the 2018–2019 Cloud, Aerosol, and Complex Terrain Interactions (CACTI) field campaign in Argentina, ARM deployed a second-generation CSAPR, known as CSAPR2. CACTI data from the CSAPR2 are now available as b1-level products. Building on the original CACTI operational data, the b1-level products feature improved data quality resulting from extensive analyses and corrections. The data are cross-calibrated to a common point, datastreams are corrected for operational issues that occurred during the campaign, and several data quality masks and basic derived products are incorporated. For more information, read the CACTI radar b1-level processing report.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2018

csapr2cfrzppi (a1)

The C-Band Scanning ARM Precipitation Radar is a dual-polarization Doppler weather radar that operates in a simultaneous transmit and receive (STAR) mode, splitting the transmit signal so that power is transmitted on both horizontal and vertical polarizations at the same time. The CSAPR can also transmit on a single polarization (horizontal or vertical) and measure linear depolarization ratio (LDR). In addition to the first three Doppler moments (reflectivity, radial velocity, and spectra width), the CSAPR also provides differential reflectivity, correlation coefficient, and specific differential phase. The dual-polarization variables enable the provision of rainfall rate estimates and identification of precipitation types. For the 2018–2019 Cloud, Aerosol, and Complex Terrain Interactions (CACTI) field campaign in Argentina, ARM deployed a second-generation CSAPR, known as CSAPR2. CACTI data from the CSAPR2 are now available as b1-level products. Building on the original CACTI operational data, the b1-level products feature improved data quality resulting from extensive analyses and corrections. The data are cross-calibrated to a common point, datastreams are corrected for operational issues that occurred during the campaign, and several data quality masks and basic derived products are incorporated. For more information, read the CACTI radar b1-level processing report.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2018

csapr2cfrmmisc (a1)

The C-Band Scanning ARM Precipitation Radar is a dual-polarization Doppler weather radar that operates in a simultaneous transmit and receive (STAR) mode, splitting the transmit signal so that power is transmitted on both horizontal and vertical polarizations at the same time. The CSAPR can also transmit on a single polarization (horizontal or vertical) and measure linear depolarization ratio (LDR). In addition to the first three Doppler moments (reflectivity, radial velocity, and spectra width), the CSAPR also provides differential reflectivity, correlation coefficient, and specific differential phase. The dual-polarization variables enable the provision of rainfall rate estimates and identification of precipitation types. For the 2018–2019 Cloud, Aerosol, and Complex Terrain Interactions (CACTI) field campaign in Argentina, ARM deployed a second-generation CSAPR, known as CSAPR2. CACTI data from the CSAPR2 are now available as b1-level products. Building on the original CACTI operational data, the b1-level products feature improved data quality resulting from extensive analyses and corrections. The data are cross-calibrated to a common point, datastreams are corrected for operational issues that occurred during the campaign, and several data quality masks and basic derived products are incorporated. For more information, read the CACTI radar b1-level processing report.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2018

csapr2cfrhsrhi (a1)

The C-Band Scanning ARM Precipitation Radar is a dual-polarization Doppler weather radar that operates in a simultaneous transmit and receive (STAR) mode, splitting the transmit signal so that power is transmitted on both horizontal and vertical polarizations at the same time. The CSAPR can also transmit on a single polarization (horizontal or vertical) and measure linear depolarization ratio (LDR). In addition to the first three Doppler moments (reflectivity, radial velocity, and spectra width), the CSAPR also provides differential reflectivity, correlation coefficient, and specific differential phase. The dual-polarization variables enable the provision of rainfall rate estimates and identification of precipitation types. For the 2018–2019 Cloud, Aerosol, and Complex Terrain Interactions (CACTI) field campaign in Argentina, ARM deployed a second-generation CSAPR, known as CSAPR2. CACTI data from the CSAPR2 are now available as b1-level products. Building on the original CACTI operational data, the b1-level products feature improved data quality resulting from extensive analyses and corrections. The data are cross-calibrated to a common point, datastreams are corrected for operational issues that occurred during the campaign, and several data quality masks and basic derived products are incorporated. For more information, read the CACTI radar b1-level processing report.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2015

Measurements and simulations of the optical gain and anti-reflection coating modal reflectivity in quantum cascade lasers with multiple active region stacks

We report spectrally resolved gain measurements and simulations for quantum cascade lasers (QCLs) composed of multiple heterogeneous stacks designed for broadband emission in the mid-infrared. The measurement method is first demonstrated on a reference single active region QCL based on a double-phonon resonance design emitting at 7.8 μm. It is then extended to a three-stack active region based on bound-to-continuum designs with a broadband emission range from 7.5 to 10.5 μm. A tight agreement is found with simulations based on a density matrix model. The latter implements exhaustive microscopic scattering and dephasing sources with virtually no fitting parameters. The quantitative agreement is furthermore assessed by measuring gain coefficients obtained by studying the threshold current dependence with the cavity length. These results are particularly relevant to understand fundamental gain mechanisms in complex semiconductor heterostructure QCLs and to move towards efficient gain engineering. Finally, the method is extended to the measurement of the modal reflectivity of an anti-reflection coating deposited on the front facet of the broadband QCL.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

DOE OSTI2025

Virtual Critical Coupling in High-Power Resonant Systems

Power reflections are a fundamental challenge in high-power resonant systems, causing energy loss, limiting per- formance, and potentially damaging critical components. This problem is particularly acute in applications such as lower hybrid current drive (LHCD) for tokamak-based nuclear fusion, where efficient, stable power transfer to the plasma is paramount. In this work, we introduce and experimentally demonstrate the virtual critical coupling (VCC) mechanism, a nonmechanical method to achieve reflection-free excitation in high-power S-band resonators. VCC utilizes a temporally shaped excitation signal with a precise complex frequency, tailored to the resonator’s characteristics to enable complete energy absorption. Using a custom low-level RF system and a 5-MW S-band klystron, we conducted experiments from low power (32 mW) to high power (600 kW). Furthermore, the results demonstrate a greater than ninefold reduction in the reflection coefficient compared to conventional monochromatic excitation. This signal processing-based approach offers a robust path toward enhancing the efficiency and stability of high-power resonant systems, with significant implications for particle accelerators and the advancement of nuclear fusion energy.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

DOE OSTI2020

Optical properties of cubic boron arsenide

The ultrahigh thermal conductivity of cubic boron arsenide (BAs) makes it a promising material for next-generation electronics and optoelectronics. Here, we report measured optical properties of BAs crystals, including the complex dielectric function, refractive index, and absorption coefficient in the ultraviolet, visible, and near-infrared wavelength range. In this work, the data were collected at room temperature using spectroscopic ellipsometry and transmission and reflection spectroscopy. We further calculated the optical response using density functional theory and many-body perturbation theory, considering quasiparticle and excitonic corrections. The computed values for the direct and indirect bandgaps (4.25 eV and 2.07 eV) agree well with the measured results (4.12 eV and 2.02 eV). Our findings pave the way for using BAs in future electronic and optoelectronic applications that take advantage of its demonstrated ultrahigh thermal conductivity and predicted high ambipolar carrier mobility.

74 ATOMIC AND MOLECULAR PHYSICS↗

DOE OSTI2017

Specular reflection treatment for the 3D radiative transfer equation solved with the discrete ordinates method

The contribution of this paper relies in the development of numerical algorithms for the mathematical treatment of specular reflection on borders when dealing with the numerical solution of radiative transfer problems. The radiative transfer equation being integro-differential, the discrete ordinates method allows to write down a set of semi-discrete equations in which weights are to be calculated. The calculation of these weights is well known to be based on either a quadrature or on angular discretization, making the use of such method straightforward for the state equation. Also, the diffuse contribution of reflection on borders is usually well taken into account. However, the calculation of accurate partition ratio coefficients is much more tricky for the specular condition applied on arbitrary geometrical borders. This paper presents algorithms that calculate analytically partition ratio coefficients needed in numerical treatments. The developed algorithms, combined with a decentered finite element scheme, are validated with the help of comparisons with analytical solutions before being applied on complex geometries.

97 MATHEMATICS AND COMPUTING↗

DOE OSTI2017

Self-Referenced Method for Estimating Refractive Index and Absolute Absorption of Loose Semiconductor Powders

The absolute absorption coefficient, α(E), is a critical design parameter for devices using semiconductors for light harvesting associated with renewable energy production, both for classic technologies such as photovoltaics and for emerging technologies such as direct solar fuel production. While α(E) is well-known for many classic simple semiconductors used in photovoltaic applications, the absolute values of α(E) are typically unknown for the complex semiconductors being explored for solar fuel production due to the absence of single crystals or crystalline epitaxial films that are needed for conventional methods of determining α(E). In this work, a simple self-referenced method for estimating both the refractive indices, n(E), and absolute absorption coefficients, α(E), for loose powder samples using diffuse reflectance data is demonstrated. In this method, the sample refractive index can be deduced by refining n to maximize the agreement between the relative absorption spectrum calculated from bidirectional reflectance data (calculated through a Hapke transform which depends on n) and integrating sphere diffuse reflectance data (calculated through a Kubleka–Munk transform which does not depend on n). This new method can be quickly used to screen the suitability of emerging semiconductor systems for light-harvesting applications. The effectiveness of this approach is tested using the simple classic semiconductors Ge and Fe 2 O 3 as well as the complex semiconductors La 2 MoO 5 and La 4 Mo 2 O 11 . The method is shown to work well for powders with a narrow size distribution (exemplified by Fe 2 O 3 ) and to be ineffective for semiconductors with a broad size distribution (exemplified by Ge). As such, it provides a means for rapidly estimating the absolute optical properties of complex solids which are only available as loose powders.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2016

Experimental Effects on IR Reflectance Spectra: Particle Size and Morphology

For geologic and extraterrestrial samples it is known that both particle size and morphology can have strong effects on the species’ infrared reflectance spectra. Due to such effects, the reflectance spectra cannot be predicted from the absorption coefficients alone. This is because reflectance is both a surface as well as a bulk phenomenon, incorporating both dispersion as well as absorption effects. The same spectral features can even be observed as either a maximum or minimum. The complex effects depend on particle size and preparation, as well as the relative amplitudes of the optical constants n and k, i.e. the real and imaginary components of the complex refractive index. While somewhat oversimplified, upward-going amplitude in the reflectance spectrum usually result from surface scattering, i.e. rays that have been reflected from the surface without penetration, whereas downward-going peaks are due to either absorption or volume scattering, i.e. rays that have penetrated or refracted into the sample interior and are not reflected. While the effects are well known, we report seminal measurements of reflectance along with quantified particle size of the samples, the sizing obtained from optical microscopy measurements. The size measurements are correlated with the reflectance spectra in the 1.3 – 16 micron range for various bulk materials that have a combination of strong and weak absorption bands in order to understand the effects on the spectral features as a function of the mean grain size of the sample. We report results for both sodium sulfate Na2SO4 as well as ammonium sulfate (NH4)2SO4; the optical constants have been measured for (NH4)2SO4. To go a step further from the field to the laboratory we explore our understanding of particle size effects on reflectance spectra in the field using standoff detection. This has helped identify weaknesses and strengths in detection using standoff distances of up 160 meters away from the Target. The studies have shown that particle size has an enormous influence on the measured reflectance spectra of such materials; successful identification requires sufficient, representative reflectance data to include the particle sizes of interest.

Beiswenger, Toya N.↗

DOE OSTI2017

Propagation of a Strong Shock Over a Random Bed of Spherical Particles

Propagation of a strong shock through a bed of particles results in complex wave dynamics such as a reflected shock, a transmitted shock, and highly unsteady flow inside the particle bed. In this paper we present three-dimensional numerical simulations of shock propagation in air over a random bed of particles. We assume the flow is inviscid and governed by the Euler equations of gas dynamics. Simulations are carried out by varying the volume fraction of the particle bed at a fixed shock Mach number. We compute the unsteady inviscid streamwise and transverse drag coefficients as a function of time for each particle in the random bed as a function of volume fraction. We show that (i) there are significant variations in the peak drag for the particles in the bed, (ii) the mean peak drag as a function of streamwise distance through the bed decreases with a slope that increases as the volume fraction increases, and (iii) the deviation from the mean peak drag does not correlate with local volume fraction. We also present the local Mach number and pressure contours for the different volume fractions to explain the various observed complex physical mechanisms occurring during the shock-particle interactions. Since the shock interaction with the random bed of particles leads to transmitted and reflected waves, we compute the average flow properties to characterize the strength of the transmitted and reflected shock waves and quantify the energy dissipation inside the particle bed. Finally, to better understand the complex wave dynamics in a random bed, we consider a simpler approximation of a planar shock propagating in a duct with a sudden area change. We obtain Riemann solutions to this problem, which are used to compare with fully resolved numerical simulations.

42 ENGINEERING↗

DOE OSTI2024

Method to derive the infrared complex refractive indices n(λ) and k(λ) for organic solids from KBr pellet absorption measurements

Obtaining the complex refractive index vectors $n($$\tilde{v})$ and $k($$\tilde{v})$ allows calculation of the (infrared) reflectance spectrum that is obtained from a solid in any of its many morphological forms. Here, we report an adaptation to the KBr pellet technique using two gravimetric dilutions to derive quantitative $n($$\tilde{v})$/$k($$\tilde{v})$ for dozens of powders with greater repeatability. The optical constants of bisphenol A and sucrose are compared to those derived by other methods, particularly for powdered materials. The variability of the $k$ values for bisphenol A was examined by 10 individual measurements, showing an average coefficient of variation for $k$ peak heights of 5.6%. Though no established standards exist, the pellet-derived $k$ peak values of bisphenol A differ by 11% and 31% from their single-angle- and ellipsometry-derived values, respectively. These values provide an initial estimate of the precision and accuracy of complex refractive indices that can be derived using this method. Limitations and advantages of the method are discussed, the salient advantage being a more rapid method to derive $n$/$k$ for those species that do not readily form crystals or specular pellets.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

DOE OSTI2020

Assessment of the degree of hydration of ocular surface tissues using THz reflectometry

Using the effective medium model, the complex permittivity of the ocular surface system in the THz frequency range is considered. The penetration depth of THz radiation and the sensitivity of the reflected component to the dynamics of evaporation of the tear film are discussed. The results of in vivo experiments aimed to determine the reflection coefficient of the ocular surface using continuous THz reflectometers are well described using the developed model. (paper)

36 MATERIALS SCIENCE↗

DOE OSTI2019

Obtaining the complex optical constants n and k via quantitative absorption measurements in KBr pellets

Reflectance (emittance) spectroscopy, especially at infrared wavelengths, continues to grow in utility as an analytical technique for contact, standoff, and remote sensing. The reflectance spectra of solids, however, are complex, depending on many parameters, even for the same material. Granule or powder particle size, crystal morphology, layer thickness, and substrate material all affect the spectral distribution of reflected light. However, such phenomena can all be modeled if the optical constants n(?) and k(?) are available. If the quantitative absorption coefficient K(?) is known, the k value can be obtained via the relation k(?) = 2.303K(?)/4p?. The absorption coefficient can in turn be derived from a simple KBr-pellet infrared absorption measurement, provided the pellet mass ratio is prepared quantitatively. The method requires the pellet’s mass and diameter, along with the analyte mass fraction and density. In this paper we demonstrate the requisite experimental details in preparing the pellets, as well as methods to reduce light scattering in order to obtain more quantitative values. Theoretical methods to derive the related optical constants will also be detailed, in particular the assumptions used to obtain the scalar refractive index n. Ideally, this value is known or measured separately, but in some cases we have found that it can be approximated (first approximation) for most organic chemicals by n~1.5 at the shortest wavelength. The results are presented for a couple of species.

optical constants, solids, KBr pellet↗

DOE OSTI2026

Generation of random geological models using multi-randomization for machine learning

Generating high-fidelity geological models is essential for advancing machine learning (ML) methods in automated seismic interpretation. For instance, seismic images paired with corresponding fault labels are foundational for ML-based fault detection from seismic migration sections. While several open-access datasets of random geological models exist, open-source tools specifically designed to produce large volumes of such models for ML applications remain scarce. To address this gap, we present RGM (Random Geological Model), an open-source software package for efficiently generating 2D and 3D synthetic geological models tailored for ML workflows. RGM supports the creation of diverse model components, including medium property distributions (P-/S-wave velocities and density), seismic reflectivity images (i.e., synthetic migration sections), relative geological time, and discrete fault attributes such as probability, dip, strike, rake, and displacement. It also accommodates the creation of complex geological features such as salt bodies and unconformities. The model generation algorithm employs a multi-randomization strategy, yielding an effectively infinite-dimensional model space that encompasses a wide range of geological scenarios and associated seismic features. Furthermore, RGM incorporates a method to generate synthetic elastic migration images using analytical elastic reflection coefficients combined with frequency-dependent scaling. This functionality enables the creation of training datasets for ML models that leverage elastic seismic images. RGM is implemented in modern object-oriented Fortran, allowing users to flexibly control statistical parameters governing model variability. We demonstrate the capability, performance, and geological realism of the package through comprehensive 2D and 3D examples.

58 GEOSCIENCES↗