Search NASA⌕ Search

SEARCH · Search NASA

Results for “Convective boundary layer”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Connection Between Mass Flux Transport and Eddy Diffusivity in Convective Atmospheric Boundary Layers

Turbulence parameterizations for convective boundary layer in coarse-scale atmospheric models usually consider a combination of the eddy-diffusive transport and a non-local transport, typically in the form of a mass flux term, such as the widely adopted eddy-diffusivity mass-flux (EDMF) approach. These two types of turbulent transport are generally considered to be independent of each other. Using results from large-eddy simulations, here, we show that a Taylor series expansion of the updraft and downdraft mass-flux transport can be used to approximate the eddy-diffusivity transport in the atmospheric surface layer and the lower part of the mixed layer, connecting both eddy-diffusivity and mass-flux transport theories in convective conditions, which also quantifies departure from the Monin-Obukhov similarity (MOS) in the surface layer. This study provides a theoretical support for a unified EDMF parameterization applied to both the surface layer and mixed layer and highlights important correction required for surface models relying on MOS

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

Towards a self-consistent model of the convective core boundary in upper main sequence stars: I. 2.5D and 3D simulations

There is strong observational evidence that the convective cores of intermediate-mass and massive main sequence stars are substantially larger than those predicted by standard stellar-evolution models. However, it is unclear what physical processes cause this phenomenon or how to predict the extent and stratification of stellar convective boundary layers. Convective penetration is a thermal-timescale process that is likely to be particularly relevant during the slow evolution on the main sequence. We use our low-Mach-number S EVEN -L EAGUE H YDRO code to study this process in 2.5D and 3D geometries. Starting with a chemically homogeneous model of a 15 M ⊙ zero-age main sequence star, we construct a series of simulations with the luminosity increased and opacity decreased by the same factor, ranging from 10 3 to 10 6 . After reaching thermal equilibrium, all of our models show a clear penetration layer; its thickness becomes statistically constant in time and it is shown to converge upon grid refinement. The penetration layer becomes nearly adiabatic with a steep transition to a radiative stratification in simulations at the lower end of our luminosity range. This structure corresponds to the adiabatic ‘step overshoot’ model often employed in stellar-evolution calculations. The simulations with the highest and lowest luminosity differ by less than a factor of two in the penetration distance. The high computational cost of 3D simulations makes our current 3D data set rather sparse. Depending on how we extrapolate the 3D data to the actual luminosity of the initial stellar model, we obtain penetration distances ranging from 0.09 to 0.44 pressure scale heights, which is broadly compatible with observations.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2020

Unified Entrainment and Detrainment Closures for Extended Eddy-Diffusivity Mass-Flux Schemes

The extended Eddy Diffusivity Mass Flux (EDMF) scheme is used as a unied parameterization that simulates subgrid-scale dynamics across a range of regimes.This work presents unied entrainment and detrainment closures that allow this scheme to simulate the dry convective boundary layer, shallow convection and deep convection , while adjacent works present other necessary closures for this unied scheme and test its performance for stable, stratocumulus topped and convective boundary layers. Entrainment and detrainment are modeled as a combination of turbulent and dynamical processes. The turbulent component is taken as downgradient diffusion between subdomains. The dynamical component is based on a ratio of buoyancy and vertical velocity that ensures consistent treatment of the ratio of mass-flux at vanishing area fraction. Dynamical detrainment is controlled by the difference in relative humidity between subdomains when liquid water is present. These closures are rst evaluated with entrainment and detrainment diagnosed from Large Eddy Simulations where decaying tracers are used to identify the different subdomains and mass exchanges between them. When implemented in a single column model (SCM), these closures are tested in simulations of several observationally motivated cases of dry convective boundary layer, shallow convection and deep convection. Results show good agreement between the SCM and Large Eddy Simulations in key properties for climate models and profiles of first, second and third moments. The development of diurnal cycles and the onset of and precipitation (with simplified microphysics) are well predicted by the SCM.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

Convective Boundary-Layer Spatial Heterogeneity Experiment Field Campaign Report

Earth system models (ESMs) require accurate heat, mass, and momentum exchanges between components, which requires accurate observations and modeling of the atmospheric boundary layer. Over the land, the daytime convective atmospheric boundary layer (CBL, also called the convective mixing layer) develops and evolves daily, driven by solar surface heating. Doppler lidar (DL) measurements of vertical velocities provide an effective way to document the diurnal cycle of CBL (Chu et al. 2023). With the support of the U.S. Department of Energy (DOE) Atmospheric Research (ASR) program, we studied convective mixing-layer heights (MLH) across multiple DOE Atmospheric Radiation Measurement (ARM) Southern Great Plains (SGP) observatory sites based on DL measurements.

54 ENVIRONMENTAL SCIENCES↗
NASA NTRS2019

A New Method to Retrieve the Diurnal Variability of Planetary Boundary Layer Height from Lidar Under Different Thermodynamic Stability Conditions

The planetary boundary layer height (PBLH) is an important parameter for understanding the accumulation of pollutants and the dynamics of the lower atmosphere. Lidar has been used for tracking the evolution of PBLH by using aerosol backscatter as a tracer, assuming aerosol is generally well-mixed in the PBL; however, the validity of this assumption actually varies with atmospheric stability. This is demonstrated here for stable boundary layers (SBL), neutral boundary layers (NBL), and convective boundary layers (CBL) using an 8-year dataset of micropulse lidar (MPL) and radiosonde (RS) measurements at the ARM Southern Great Plains, and MPL at the GSFC site. Due to weak thermal convection and complex aerosol stratification, traditional gradient and wavelet methods can have difficulty capturing the diurnal PBLH variations in the morning and forenoon, as well as under stable conditions generally. A new method is developed that combines lidar-measured aerosol backscatter with a stability dependent model of PBLH temporal variation (DTDS). The latter helps “recalibrate” the PBLH in the presence of a residual aerosol layer that does not change in harmony with PBL diurnal variation. The hybrid method offers significantly improved PBLH detection, with better correlation and smaller biases, under most thermodynamic conditions, especially for SBL and CBL. Relying on the physical process of PBL diurnal development, different schemes are developed for growing, maintenance, and decaying periods. Comprehensive evaluation of this new method shows much better tracking of diurnal PBLH variation and significantly smaller biases under various pollution levels.

Tianning Su↗
NASA NTRS1985

Large-Eddy Simulation in Planetary Boundary-Layer Research

The structure and dynamics of the convective boundary layer are discussed. The vertical transport of a conservative, passive scalar was simulated. Also studied were the statistics by top-down and bottom-up scalar fields. Substantial differences were found between them due, presumably, to the asymmetry in the convective boundary layer. A generalization of mixed-layer scaling was developed which allows one to include the effects of top-down diffusion.

Wyngaard, J. C.↗
NASA NTRS1985

The structure of the convective atmospheric boundary layer as revealed by lidar and Doppler radars

Results on the structure of the convective atmospheric boundary layer based on the analyses of data from the instrumented NSSL-KTVY tower, airborne Doppler lidar, and ground-based Doppler radars are presented. The vertically averaged wind over the boundary layer was found to be insensitive to baroclinicity, supporting the hypothesis of Arya and Wyngaard (1975). The computed momentum flux profiles were affected by baroclinicity. Horizontal wind spectra from lidar, radar, and tower data compared well with each other both in shape and magnitude. A consistent peak found near 4 km in all the computed spectra might have been caused by horizontally symmetric cells with horizontal wavelength 4 times the boundary-layer height as shown in Kuettner (1971) for the case of weak wind shear.

Eilts, M. D.↗
NASA NTRS2003

Lidar Measurements of Wind, Moisture and Boundary Layer Evolution in a Dryline During IHOP2002

Variability in the convective boundary layer moisture, wind and temperature fields and their importance in the forecasting and understanding of storms have been discussed in the literature. These variations have been reported in relation to frontal zones, stationary boundaries and during horizontal convective rolls. While all three vary substantially in the convective boundary layer, moisture poses a particular challenge. Moisture or water vapor concentration (expressed as a mass mixing ratio, g/kg), is conserved in all meteorological processes except condensation and evaporation. The water vapor mixing ratio often remains distinct across an air -mass boundary even when the temperature difference is indistinct. These properties make it an ideal choice in visualizing and understanding many of the atmosphere's dynamic features. However, it also presents a unique measurement challenge because water vapor content can vary by more than three orders of magnitude in the troposphere. Characterization of the 3D-distribution of water vapor is also difficult as water vapor observations can suffer from large sampling errors and substantial variability both in the vertical and horizontal. This study presents groundbased measurements of wind, boundary layer structure and water vapor mixing ratio measurements observed by three co-located lidars. This presentation will focus on the evolution and variability of moisture and wind in the boundary layer during a dry line event that occurred on 22 May 2002. These data sets and analyses are unique in that they combine simultaneous measurements of wind, moisture and CBL structure to study the detailed thermal variability in and around clear air updrafts during a dryline event. It will quantify the variation caused by, in and around buoyant plumes and across a dryline. The data presented here were collected in the panhandle of Oklahoma as part of the International BO Project (IHOP-2002), a field experiment that took place over the Southern Great Plains (SGP) of the United States from 13 May to 30 June 2002. The chief goal of IHOP-2002 is to improve characterization of the four-dimensional (4-D) distribution of water vapor and its application to improving the understanding and prediction of convection

Demoz, Belay↗
DOE OSTI2023

Daytime convective development over land: the role of surface forcing

Water availability at the Earth surface determines the portioning of the surface heat flux into its sensible and latent components, that is, the surface heat flux Bowen ratio. The two components affect differently the surface buoyancy flux and thus the development and growth of the convective boundary layer. As a result, the Bowen ratio has a strong impact on the daytime dry and moist convection development over land. Here, we use two canonical modeling test cases, one for the shallow convection and one for the shallow-to-deep convection transition, to document the impact of the surface Bowen ratio on daytime convection development. A simple approach is used where results from simulations featuring the original setup are contrasted with simulations where surface sensible heat flux takes on values of the latent heat flux and vice versa. Such a change illustrates the key impact of the surface water availability without changing the total surface heat flux. Because of the larger surface buoyancy flux, simulations with the reversed surface heat fluxes feature faster deepening of the convective boundary layer and wider clouds once moist convection develops. Mean cloud base width of cumulus clouds increases with the boundary layer depth. For shallow-to-deep convection transition, comparison of simulations with the observed large-scale flow that feature substantial lower-tropospheric shear with simulations with no mean horizontal flow suggests that the organization of convective circulations within the boundary layer strongly affects initial size and organization of shallow convection, as well as the subsequent width increase once convection deepens and eventually transitions to deep precipitating convection. A simple explanation is provided of why deeper well-mixed convective subcloud layer results in wider clouds. The key is the larger width of boundary layer coherent updraft structures when the mixed layer is deeper.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

Deep Learning for Subgrid‐Scale Turbulence Modeling in Large‐Eddy Simulations of the Convective Atmospheric Boundary Layer

Abstract In large‐eddy simulations, subgrid‐scale (SGS) processes are parameterized as a function of filtered grid‐scale variables. First‐order, algebraic SGS models are based on the eddy‐viscosity assumption, which does not always hold for turbulence. Here we apply supervised deep neural networks (DNNs) to learn SGS stresses from a set of neighboring coarse‐grained velocity from direct numerical simulations of the convective boundary layer at friction Reynolds numbers Re τ up to 1243 without invoking the eddy‐viscosity assumption. The DNN model was found to produce higher correlation between SGS stresses compared to the Smagorinsky model and the Smagorinsky‐Bardina mixed model in the surface and mixed layers and can be applied to different grid resolutions and various stability conditions ranging from near neutral to very unstable. The DNN model can capture key statistics of turbulence in a posteriori (online) tests when applied to large‐eddy simulations of the atmospheric boundary layer.

54 ENVIRONMENTAL SCIENCES↗
NASA NTRS2002

Lidar Measurements of Wind, Moisture, and Boundary Layer Evolution in a Dry Line during 1HOP 2002

Variability in the convective boundary layer moisture, wind and temperature fields and their importance in the forecasting and understanding of storms have been discussed in the literature. These . variations have been reported in relation to frontal zones, stationary boundaries and during horizontal convective rolls. While all three vary substantially in the convective boundary layer, moisture poses a particular challenge. Moisture or water vapor concentration (expressed as a mass mixing ratio, g/kg), is conserved in all meteorological processes except condensation and evaporation. The water vapor mixing ratio often remains distinct across an air-mass boundary even when the temperature difference is indistinct. These properties make it an ideal choice in visualizing and understanding many of the atmosphere's dynamic features. However, it also presents a unique measurement challenge because water vapor content can vary by more than three orders of magnitude in the troposphere. Characterization of the 3D-distribution of water vapor is also difficult as water vapor observations can suffer from large sampling errors and substantial variability both in the vertical and horizontal. This study presents ground-based measurements of wind, boundary layer structure and water vapor mixing ratio measurements observed by three co-located lidars. This presentation will focus on the evolution and variability of moisture and wind in the boundary layer during a dry line event that occurred on 22 May 2002. These data sets and analyses are unique in that they combine simultaneous measurements of wind, moisture and CBL structure to study the detailed thermal variability in and around clear air updrafts during a dryline event. It will quantify the variation caused by, in and around buoyant plumes and across a dryline. The data presented here were collected in the panhandle of Oklahoma as part of the International H2O Project (MOP-2002), a field experiment that took place over the Southern Great Plains (SGP) of the United States from 13 May to 30 June 2002. The chief goal of MOP-2002 is to improve characterization of the four-dimensional (4-D) distribution of water vapor and its application to improving the understanding and prediction of convection

Demoz, Belay↗