The roles of deep convection and extratropical mixing in the tropical tropopause layer: An in situ measurement perspective
Explore the source record for details and available documents.
Maryann R. Sargent↗
SEARCH · Search NASA
Results for “Convective mixing layer”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Dual Wall Angles Would Enhance Performance Of A Solar Pond
Proposed dual-angle design for Sun-facing wall of solar pond enhances solar-energy-storage performance of pond; increase in performance over that of similar pond with conventional (single-angle) wall estimated to be 25 percent. Design compromises between maximizing heating and minimizing convection. Top part of Sun-facing wall optimized for top colder layer of water, less tendency toward convective mixing. Bottom part of wall optimized for bottom, warmer layer of water, greater tendency towards convection. Optimization involves consideration of both anticipated temperature-vs.-depth profile (affects tendency toward convection) and latitude (affects angle of incidence of solar radiation and rate of heating).
Noever, David A.↗
Atmospheric Aerosol and Thermal Structure in the Boundary Layer Over the Los Angeles Basin
A field study using a mobile lidar was recently conducted in the L. A. Basin, California, to (1) examine the relationship between the vertical aerosol and the thermal structure, and (2) map the vertical aerosol structure in the atmospheric boundary layer over the basin. These data are needed for use in the development of a mixing-depth submodel required for photochemical air Quality simulation models. Toward these ends, a series of lidar aerosol measurements in conjunction with balloon and aircraft temperature soundings were taken at a site in El Monte, and in a mobile mode along a 90-mile freeway loop between El Monte, Santa Monica, and Long Beach. The lidar data are presented in the form of time-height and distance-height cross sections. The results indicate that, although aerosol concentrations are frequently present above the base of the marine inversion, these are generally in stratified layers in contrast to the more uniform nature of the lower convective layer, permitting the mixing depth to be distinguished on this basis. The lidar-derived mixing depths are well correlated (within 100 m) with daytime temperature inversions. Other significant features shown by the lidar data include large Basin-wide mixing-depth variations, waves with amplitudes of 200-300 m and wavelengths of 1000-1500 m on the lower aerosol layer, and apparent aerosol "chimneys" with overrunning in the vicinity of convergence zones.
Johnson, Warren B.↗
Scalar mixing in the supersonic shear layer
Experiments were conducted in a two-stream planar mixing layer facility at convective Mach numbers of 0.28 and 0.62. Mie scattering from condensed alcohol droplets and planar laser-induced fluorescence (PLIF) of nitric oxide were used for flow visualization in both the side and plan views. The PLIF signals were approximately proportional to mixture fraction and were used to generate statistical quantities. Visualizations using both the Mie scattering and PLIF indicate the structure is essentially two-dimensional at Mc = 0.28 and three-dimensional at Mc = 0.62. Perspective renderings of side view images show the structures are streamwise ramped at Mc = 0.28 and cross-stream ramped at Mc = 0.62. This difference appears to be associated with decreasing streamwise structure spacings at the higher Mc condition. The statistical analysis suggests that with increasing compressibility, the scalar fluctuations are smaller, and the fraction of mixed fluid is higher.
Clemens, N. T.↗
Mixing of a chemically buoyant layer at the top of a thermally convecting fluid: Implications for mantle dynamics with application to Venus
Partial melting to generate the crust of a planet can create a buoyant residual layer at the top of the mantle which may have important implications for episodic planetary evolution. However, the rate of mixing of such a chemically buoyant layer with a thermally convecting mantle is an important unresolved question. Except for a few laboratory and numerical studies designed to address questions related to convection in the Earth's mantle, previous studies have generally treated on the mixing of passive tracers. The inhibiting role of chemical buoyancy on mixing is intuitively obvious but not fully understood quantitatively. In this study, we examine the dynamics of an intrinsically buoyant fluid layer at the top of a deeper, thermally convecting, infinite Prandtl number fluid that is heated from below.
Parmentier, E. M.↗
The origin of the Crab Nebula and the electron capture supernova in 8-10 M solar mass stars
The chemical composition of the Crab Nebula is compared with several presupernova models. The small carbon and oxygen abundances in the helium-rich nebula are consistent with only the presupernova model of the star whose main sequence mass was MMS approximately 8-9.5 M. More massive stars contain too much carbon in the helium layer and smaller mass stars do not leave neutron stars. The progenitor star of the Crab Nebula lost appreciable part of the hydrogen-rich envelope before the hydrogen-rich and helium layers were mixed by convection. Finally it exploded as the electron capture supernova; the O+Ne+Mg core collapsed to form a neutron star and only the extended helium-rich envelope was ejected by the weak shock wave.
Nomoto, K.↗
Effective temperatures and luminosities of very hot o-type subdwarfs
Twelve very hot O-type subdwarfs were observed with the IUE-satellite in the low dispersion mode. Temperatures were derived from the slopes of the UV continua and distances were estimated from the color excesses. Most of them are hotter than 60,000 K, i.e., they are the hottest known subdwarfs. From their spectral appearance and location in a H.R.-diagram they form a rather inhomogeneous group. Three of them turned out to be central stars or nearly central stars, and four are definitely near the white dwarf stage. The surface helium to hydrogen ratio varies from about normal to the extreme case. Most of them appear to be post EHB objectives of 0.5 solar mass with a helium burning shell as their energy source, and their peculiar helium-to-hydrogen ratios are most likely the result of diffusion and convective mixing in surface layers.
Schoenberner, D.↗
Effective temperatures and luminosities of very hot O type subdwarfs
Twelve very hot O-type subdwarfs were observed with the IUE-satellite in the low dispersion mode. Temperatures were derived from the slopes of the UV continua and distances were estimated from the color excesses. Most of them are hotter than 60,000 K, i.e., they are the hottest known subdwarfs. From their spectral appearance and location in a H.R.-diagram, they form a rather inhomogeneous group. Three of them turned out to be central stars or nearly central stars, and four are definitely near the white dwarf stage. The surface helium to hydrogen ratio varies from about normal to the extreme case. Most of them appear to be post EHB objectives of 0.5 solar mass with a helium burning shell as their energy source, and their peculiar helium-to-hydrogen ratios are most likely the result of diffusion and convective mixing in surface layers. Previously announced in STAR as N83-23254
Schonberner, D.↗
Analysis of Doppler lidar wind measurements
Doppler lidar and multiple Doppler radar data were obtained in a convectively mixed planetary boundary layer. The lidar measurements were possible due to scattering from existing aerosols; radar reflecting chaff was released in the atmosphere to make it visible to the multiple Doppler radar network. The data were analyzed to obtain detailed horizontal wind structures. The divergence of the horizontal wind was calculated and the anelastic continuity equation integrated to obtain vertical air motions. Differences between the areally averaged quantities and the grid point values provided a measure of the fluctuations in the wind components or the turbulent wind fluctuations. Vertical profiles of the mean winds and quantities related to the turbulent kinetic energy components and the turbulent momentum transfers were also calculated.
Srivastava, R. C.↗
Exploring the Continuum of Stratiform and Cumulus Cloudiness: Observational Insights Related to Marine Boundary Layer Clouds
Low-level marine clouds take on a wide range of morphological states owing to external forcing and internal feedbacks. Rarely are shallow marine clouds adequately described by a single simplified framework but instead exhibit features that partially conform to several states that could be considered “limiting”. Perhaps the most apparent dichotomy is whether to consider shallow clouds as existing within a surface-driven mixed layer or as convective “plume” elements positioned on top. Do the rules that govern the limiting cases transition smoothly through the hybrid scenarios found in nature, or are there particular regions of attraction or repulsion?We have identified 3 ”axes” along which to investigate how the energetics, thermodynamics and cloud macro structure relate to the intermediate spaces between idealizations.
Ewan Crosbie↗
A Method for Obtaining High Time and Spatial Resolution Convective Cloud Top Data for the TTL
A method for obtaining high time and spatial resolution convective cloud top data for the TTL Leonhard Pfister, Eric Jensen, Rei Ueyama, Eliot Atlas, and Maria Navarro Convective systems in the tropics have a maximum in the cloud top altitude distribution of about 13.5 km. However, there is a significant tail to this distribution -- a few percent reach the cold point tropopause (CPT) at 16.5 km, and there has been clear evidence of convective mass deposited as high as 19 km in the tropics. The region between 13.5 km and the cold point tropopause is transitional, between the free tropical troposphere where convective mixing dominates, and the stratosphere where slow upward ascent dominates. In this region (the Tropical Tropopause Layer), convective injection, slow ascent, and mixing from midlatitudes all have similar time scales. So, even though only a few percent of convective systems reach the CPT, convection is important. Space Based Lidar and cloud radar measurements have yielded information about long term average statistical distributions of cloud altitude as a function of location. However, we also need time-dependent cloud top altitude and cloud top potential temperature information, primarily to understand the water vapor and TTL cloud distributions. This is because the effect of convection depends on the local temperature, and on the subsequent temperature history. Time dependent cloud top information is also needed to understand short-lived tracers because cross-isentropic flow is time and space dependent. This paper presents a method of obtaining time and space dependent convective cloud top theta (and altitude) information using 3-hourly geostationary brightness temperature data, coupled with global 3 -hourly rainfall estimates and temperature analyses. We explore different mixing algorithms to obtain the most reasonable agreement with near-simultaneous observations by cloudsat and calipso. Observations of short-lived tracers from ATTREX, coupled with short-term trajectories are used to test the method's accuracy. An important caveat is the ambiguity of evaluating convective cloud top altitudes under from combined cloudsat and calipso measurements.
cold point tropopause (CPT)↗
An Automated Detection Methodology for Dry Well-Mixed Layers
The intense surface heating over arid land surfaces produces dry well-mixed layers (WML) via dry convection. These layers are characterized by nearly constant potential temperature and low, nearly constant water vapor mixing ratio. To further the study of dry WMLs, we created a detection methodology and supporting software to automate the identification and characterization of dry WMLs from multiple data sources including rawinsondes, remote sensing platforms, and model products. The software is a modular code written in Python, an open source language. Radiosondes from a network of synoptic stations in North Africa were used to develop and test the WML detection process. The detection involves an iterative decision tree that ingests a vertical profile from an input data file, performs a quality check for sufficient data density, and then searches upward through the column for successive points where the simultaneous changes in water vapor mixing ratio and potential temperature are less than the specified maxima. If points in the vertical profile meet the dry WML identification criteria, statistics are generated detailing the characteristics of each layer in the profile. At the end of the vertical profile analysis, there is an option to plot analyzed profiles in a variety of file formats. Initial results show that the detection methodology can be successfully applied across a wide variety of input data and North African environments and for all seasons. It is sensitive enough to identify dry WMLs from other types of isentropic phenomena such as subsidence layers and distinguish the current day’s dry WML from previous days.
Stephen D. Nicholls↗
Mixed-phase Convective Clouds in the Polar Marine Boundary Layer
This proposal, a collaboration between two universities, firstly aims to describe the high-latitude CAO cloud regime using the array of instruments at the NSA (Barrow, Alaska) and at two mobile ARM sites (MARCUS 2017-18, and COMBLE 2020). These ARM data, and the multi-sensor variables we propose to derive, allow detailed descriptions of mesoscale organization of precipitation, thermodynamic profiles, vertical velocity, cloud depth, and cloud and precipitation properties. These observations are key for our second goal, which is to use output from validated cloud- and eddy-resolving simulations to gain insights into the linkages between microphysical processes, the MBL vertical structure, and the MBL dynamics that control cloud macrostructure.
54 ENVIRONMENTAL SCIENCES↗
An Investigation of High Frequency Motions in the Tropical Tropopause Layer near Convection
Indirect evidence indicates a role for vertical mixing in the Tropical Tropopause Layer (TTL). In the past 20 years, high altitude NASA aircraft such as the ER-2, WB-57, and GLobal Hawk have been making 20hz measurements of vertical velocity and other meteorological parameters in the Upper Tropospere-Lower Stratosphere region, many in the tropics, most recently in connection with the Airborne Tropical TRopopause EXperiment (ATTREX). In the stable environment of the UTLS, high frequency activity occurs in bursts, presumably in connection with nearby convection or strong vertical shear associated with larger scale gravity waves. This paper examines tropical high frequency aircraft data to obtain some basic information about the distribution and character of high frequency activity in vertical velocity in the TTL. In particular, we focus on relating the high frequency activity to nearby tropical convection.
tropopause↗
Chemical differentiation of a convecting planetary interior: Consequences for a one-plate planet such as Venus
Chemically depleted mantle forming a buoyant, refractory layer at the top of the mantle can have important implications for the evolution of the interior and surface. On Venus, the large apparent depths of compensation for surface topographic features might be explained if surface topography were supported by variations in the thickness of a 100-200 km thick chemically buoyant mantle layer or by partial melting in the mantle at the base of such a layer. Long volcanic flows seen on the surface may be explained by deep melting that generates low-viscosity MgO-rich magmas. The presence of a shallow refractory mantle layer may also explain the lack of volcanism associated with rifting. As the depleted layer thickens and cools, it becomes denser than the convecting interior and the portion of it that is hot enough to flow can mix with the convecting mantle. Time dependence of the thickness of a depleted layer may create episodic resurfacing events as needed to explain the observed distribution of impact craters on the venusian surface. We consider a planetary structure consisting of a crust, depleted mantle layer, and a thermally and chemically well-mixed convecting mantle. The thermal evolution of the convecting spherical planetary interior is calculated using energy conservation: the time rate of change of thermal energy in the interior is equated to the difference in the rate of radioactive heat production and the rate of heat transfer across the thermal boundary layer. Heat transfer across the thermal boundary layer is parameterized using a standard Nusselt number-Rayleigh number relationship. The radioactive heat production decreases with time corresponding to decay times for the U, Th, and K. The planetary interior cools by the advection of hot mantle at temperature T interior into the thermal boundary layer where it cools conductively. The crust and depleted mantle layers do not convect in our model so that a linear conductive equilibrium temperature distribution is assumed. The rate of melt production is calculated as the product of the volume flux of mantle into the thermal boundary layer and the degree of melting that this mantle undergoes. The volume flux of mantle into the thermal boundary layer is simply the heat flux divided by amount of heat lost in cooling mantle to the average temperature in the thermal boundary layer. The degree of melting is calculated as the temperature difference above the solidus, divided by the latent heat of melting. A maximum degree of melting is prescribed corresponding to the maximum amount of basaltic melt that the mantle can initially generate. As the crust thickens, the pressure at the base of the crust becomes high enough and the temperature remains low enough for basalt to transform to dense eclogite.
Parmentier, E. M.↗
Generating a stratocumulus-like cloud top in a convection-cloud chamber
Stratocumulus-topped boundary layers play a crucial role in influencing daily weather and earth energy balance. Entrainment at the stratocumulus cloud top affects the cloud’s lifetime, precipitation, and radiative properties, but our understanding remains limited due to the lack of resolution in both field observations and numerical simulations. A recently proposed convection-cloud chamber with detailed control of sidewall temperatures can provide a unique opportunity to explore this mechanism in a laboratory setting. In this work, we use numerical simulations to demonstrate that this design can produce a cloud top that mimics the entrainment interfacial layer in a stratocumulus cloud. Our results show that a steady-state cloud can be formed by cooling the lower portions of the sidewalls and warming the bottom surface, while a temperature inversion at the cloud top can be generated by keeping the upper sidewalls and top surface warmer than the bottom. The turbulent kinetic energy profile and budget are similar to those found in a convective boundary layer, and inhomogeneous mixing near the cloud top can be observed. These findings significantly enhance the scientific value of constructing the tall convection-cloud chamber.
54 ENVIRONMENTAL SCIENCES↗
Aerosol backscatter measurements at 10.6 microns with airborne and ground-based CO2 Doppler lidars over the Colorado High Plains. II - Backscatter structure
Measurements of tropospheric aerosol volume backscatter coefficients at 10.6-microns wavelength were obtained with airborne continuous wave and ground-based pulsed CO2 Doppler lidars over the Colorado High Plains during a 20-day period in summer 1982. A persistent 'background' layer was found between 6- and 10-km altitude, with a generally uniform backscatter mixing ratio of about 10 to the -10th sq m/kg per sr. The upper boundary of this background layer varied with the tropopause height; the lower boundary varied with the strength and diurnal cycle of convective mixing in the planetary boundary layer (PBL). For quiescent meteorological conditions, the transition from the PBL to the background layer was usually very sharp, with backscatter decreases sometimes as large as 3 decades in about 70 m. Sharp gradients were also found at the boundaries of shallow (tens of meters) subvisible cirrus clouds. For less stable conditions, associated with vertical aerosol transport by deep cumuliform clouds, backscatter tended to decrease exponentially with altitude.
Bowdle, David A.↗
Small Scale Motions Observed by Aircraft in the Tropical Tropopause Layer - Convective and Non-Convective Environments
Indirect evidence indicates a role for vertical mixing in the Tropical Tropopause Layer (TTL). In particular, detailed model studies suggest that such vertical mixing may be required to explain the value of the water vapor minimum in the TTL. There have been previous observations during the STEP Tropical aircraft campaign (1987) of bursts of high frequency activity associated with convectively generated gravity waves in the tropical western Pacific. Higher frequency, higher quality measurements from NASA high altitude aircraft (ER-2, WB-57, and Global Hawk) have been made available in the last 20 years. These include measurements of vertical velocity and other meteorological parameters. Most recently, during the ATTREX Global Hawk aircraft mission (Airborne Tropical TRopopause EXperiment), there have been extensive measurements at all altitudes of the TTL in both convective (winter western Pacific) and less convective (winter eastern Pacific) regions. This presentation represents an initial analysis of high frequency small scale (a few km max) meteorological measurements from the ATTREX dataset. We obtain some basic information about the distribution and character of high frequency activity in vertical velocity in the TTL. In particular, we focus on relating the high frequency activity to nearby tropical convection and to vertical shears associated with gravity and inertia-gravity waves.
convection↗