Search NASA⌕ Search

SEARCH · Search NASA

Results for “DIMETHYLFORMAMIDE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3

X-ray and Synchrotron Diffraction Studies of 2-(Pyridin-2-yl)-1,10- Phenanthroline in the Role of Ligand for Two Copper Polymorphs or Hydrogen bonded with 2,2,6,6-Tetramethyl-4-oxopiperidinium Hexafluorophosphate

Different extended packing motifs of dichloro-[2-(pyridin-2-yl)-1,10-phenanthroline]copper(II), CuCl2 (C17H11N3Cl2) are obtained depending on the crystallization conditions. A triclinic form (I) is obtained from dimethylformamide-diethyl ether or methanol whereas crystallization from dimethylformamide-water yields a monoclinic form (II). In each case, the CuII center is in a 5-coordinate, distorted square-pyramidal geometry. The extended packing for both forms can be described as a highly-offset π stacking arrangement with interlayer distances of 3.674 (3) and 3.679 (3) Å for (I) and (II), respectively. The reaction of diprotonated Pt(tmpip2NCN)Cl (tmpip2NCN = 2,6-bis(2,2,6,6-tetramethylpiperidylmethyl)- benzyl) with AgPF6 under acidic conditions followed by the addition of 2-(pyridin-2-yl)-1,10-phenanthroline, results in a hydrogen bonded co-crystal, 2,2,6,6-tetramethyl-4-oxopiperidinium hexafluorophosphate- 2-(pyridin-2-yl)-1,10-phenanthroline (1/1),C9H18NO+.PF6-.C17H11N3.(III). The extended packing maximizes π-π interactions in a parallel, faceto-face arrangement with an interlayer stacking distance of 3.4960 (14) Å.

copper complexes↗

Surface molecular pump enables ultrahigh catalyst activity

The performance of electrocatalysts is critical for renewable energy technologies. While the electrocatalytic activity can be modulated through structural and compositional engineering following the Sabatier principle, the insufficiently explored catalyst-electrolyte interface is promising to promote microkinetic processes such as physisorption and desorption. By combining experimental designs and molecular dynamics simulations with explicit solvent in high accuracy, we demonstrated that dimethylformamide can work as an effective surface molecular pump to facilitate the entrapment of oxygen and outflux of water. Dimethylformamide disrupts the interfacial network of hydrogen bonds, leading to enhanced activity of the oxygen reduction reaction by a factor of 2 to 3. This strategy works generally for platinum-alloy catalysts, and we introduce an optimal model PtCuNi catalyst with an unprecedented specific activity of 21.8 ± 2.1 mA/cm 2 at 0.9 V versus the reversible hydrogen electrode, nearly double the previous record, and an ultrahigh mass activity of 10.7 ± 1.1 A/mg Pt .

Science & Technology - Other Topics↗

Cure, Mechanical and Swelling Properties of Biocomposites from Chicken Feather Fibre and Acrylonitrile Butadiene Rubber

Biocomposites of acrylonitrile butadiene rubber (NBR) reinforced with chicken feather fibre (CF) were prepared using dicumyl peroxide (DCP) as vulcanizing agent. Composites with three series of chicken feather fibres were studied i.e., raw (RCF), sterilized (SCF) and alkali treated (ACF). The cure characteristics of composites were studied. The mechanical properties of NBR were found to be improved by the incorporation of chicken feather fibre in all forms. Surface modification of the fibre was done by alkaline treatment to improve the interfacial adhesion and it characterised by FTIR. Better properties are shown by the composites with ACF. The swelling behaviour of the composites in N,N-dimethylformamide, acetonitrile, dimethyl sulfoxide and water were analyzed for the swelling coefficient values. The biodegradable characteristics of CF reinforced NBR composites were studied by soil burial test which indicated that it is an eco-friendly and acceptable material. Scanning electron microscopy studies support the results of mechanical properties. The outcome obtained from this study is believed to assist the development of environmentally–friendly composites especially for specific product applications like oil seals, hoses and automobile bushes etc.

36 MATERIALS SCIENCE↗

Integrated Polymer Dissolution and Solution Blow Spinning Coupled with Solvent Recovery for Expanded Polystyrene Recycling

With increasing buoyant plastic wastes entering into oceans and food chains, the disposal and recycling of waste expanded polystyrene (WPS) has become an imminent environmental problem. In this work, a recycling scheme for waste WPS is proposed that combines the polymer dissolution recycling approach with the solution blow spinning (SBS) technique that facilitates the high-volume bulk WPS transportation and the value-addition of WPS to nanofibers. Solvent selection is critical for an economical and environmentally favorable implementation of this recycling scheme at large scale. Here, the effect of three solvents with distinct volatility, viz. ethyl acetate, toluene, and N, N- dimethylformamide (DMF) have been studied on the fiber formation and the ease of the solvent recovery, in order to ascertain the practicability of using these solvents for the recycling process. The fiber formation is experimentally demonstrated for the WPS-solvent systems using the SBS process. It is found that the fiber morphology varies for the different WPS-solvent systems. A solvent recovery scheme to recover the solvent from the air-solvent mixture (leaving SBS) is evaluated using ASPEN Plus simulation. The % solvent recovery is determined as a function of the required energy input for different process parameters including compressor pressure and air to polymer solution feed ratio. The simulation studies show that a lower feed air to polymer solution ratio and higher compressor pressure are required to obtain > 70% solvent recovery for high volatility solvents (ethyl acetate and toluene) with lower energy input and optimal operating condenser temperature (~ 0 °C). Conversely, significant solvent losses occur in the SBS process with a lower volatility solvent (DMF), leading to a lower solvent recovery for the whole process. The % DMF recovery can be improved upon by using higher feed air to polymer solution ratio although at a higher energy penalty.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Hexanuclear and Heptanuclear Nickel(II) Complexes of with a Non-Schiff-Base Tetradentate Ligand: an Example of Slow Motion Ferromagnetic Phase Transition at Very Low Temperature

Hexanuclear and heptanuclear nickel(II) complexes with N,N′-bis(2-hydroxy-3,5-dimethylbenzyl-1,2-ethanediamine (H{sub 2}hdde), [Ni{sub 6}(hdde){sub 3}(OH){sub 4}(NO{sub 3}){sub 2}(H{sub 2}O){sub 2}]·2dmf (dmf = N,N-dimethylformamide) and [Ni{sub 7}(hdde){sub 3}(OH){sub 6}(dmac){sub 3}](ClO{sub 4}){sub 2} (dmac = N,N-dimethylacetamide), were investigated. The latter complex was newly synthesized and the single-crystal X-ray structure analysis revealed a wheel-shaped heptanuclear cluster. These complexes showed a ferromagnetic interaction in the temperature dependence of magnetic susceptibilities. The micro-SQUID data of the former complex did not show SMM property, whereas the AC susceptibility measurements suggested SMM-like behavior and the zero-field-cooled and field-cooled studies showed a ferromagnetic transition near 240 mK for the latter complex.

36 MATERIALS SCIENCE↗

Coordination polymers based on zinc(II) and manganese(II) with 1,4-cyclohexanedicarboxylic acid

Three new metal-organic coordination polymers were obtained namely, [Mn{sub 3}(chdc){sub 3}-(NMP){sub 2}(DMF){sub 2}] (1, chdc{sup 2–} is trans-1,4-cyclohexanedicarboxylate, NMP is N-methylpyrrolidone, DMF is N,N-dimethylformamide), [Zn{sub 3}(chdc){sub 3}(NMP){sub 2}]•2NMP (2), and [Zn{sub 3}(chdc){sub 3}(ur)-(DMF){sub 0.5}]•DMF (3, ur is the urotropine). The crystal structures of polymers 1, 2, and 3 were determined by single-crystal X-ray crystallography. All three compounds were found to contain a trinuclear secondary building unit {M_3(OOC)_6}. Coordination polymers 1 and 2 have a layered structure, while polymer 3 has a three-dimensional coordination framework with isolated pores formed due to the presence of urotropine bridging molecules. Compounds 1 and 3 were characterized by IR spectroscopy, thermogravimetric and elemental analysis data, powder X-ray diffraction. Compound 3 was also characterized by UV-Vis diffuse reflectance spectrum.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

The impact of mixed solvents on the complexation thermodynamics of Eu(III) by simple carboxylate and amino carboxylate ligands

To gain insight on the role of mixed solvents on the thermodynamic driving forces for the complexation between trivalent f-elements and organic ligands, solution phase thermodynamic parameters were determined for Eu(III) complexation with 2-hydroxyisobutyric acid (HIBA) and 2-aminoisobutyric acid (AIBA) in mixed methanol (MeOH)-water and N,N-dimethylformamide (DMF)-water solvents. Included in this study were the determination of mixed solvent autoprotolysis constants (pK α ) as well as the thermodynamic formation constants: log β, ΔG, ΔH, and ΔS, for ligand protonation and Eu(III)-ligand complexation utilizing potentiometry and calorimetry techniques. The results presented are conditional thermodynamic values determined at an ionic strength of 1.0 M NaClO 4 and a temperature of 298 K. It was found that moving from an aqueous solution to a binary aqueous-organic solvent affected all solution equilibria to some degree and that the extent of change depended on both the type of mixed solvent and the ligand in each study. Here, the ability to understand and predict these changes in thermodynamic values as a function of solvent composition provides important information about the chemistry of the trivalent f-elements.

2-aminoisobutyric acid↗

Syntheses, structures, and luminescence of a series of novel trimetallic coordination polymers constructed by Cu-I clusters and alkaline-carboxyl- alkaline-earth building units

Seven novel trimetallic coordination polymers, namely, [Li{sub 2}SrCu{sub 2}I{sub 2}(IN){sub 4}(DMF){sub 3}]{sub n}·nDMF (1), [LiSr{sub 2}Cu{sub 2}I{sub 2}(IN){sub 5}(DMF){sub 2}]{sub n} (2), [NaSr{sub 2}Cu{sub 2}I{sub 2}(IN){sub 4}(NO{sub 3})(DMF){sub 4}]{sub n}·nDMF·0.5nH{sub 2}O (3), [NaSr{sub 2}Cu{sub 2}I{sub 2}(IN){sub 5}(DMF){sub 4}]{sub n}·3nDMF·3nH{sub 2}O (4), [Li{sub 2}BaCu{sub 2}I{sub 2}(IN){sub 4}(DMF){sub 3}]{sub n}·nDMF (5), [Li{sub 2}Ba{sub 2}Cu{sub 2}I{sub 2}(IN){sub 4}(OAc){sub 2}(DMF){sub 3}]{sub n}·nDMF·0.5nH{sub 2}O (6), [Li{sub 2}Ba{sub 2}Cu{sub 2}I(IN){sub 7}(H{sub 2}O){sub 1.5}]{sub n}·0.5nH{sub 2}O (7) (IN = isonicotinic anion, DMF = N, N-dimethylformamide) have been synthesized via solvothermal method. All of the coordination polymers were characterized by single-crystal X-ray diffraction, FT-IR spectroscopy, elemental analysis and thermogravimetric analysis. Single-crystal X-ray diffraction determinations revealed that compounds 1–7 were three dimensional frameworks. Compounds 1–6 were assembled by Cu{sub 2}I{sub 2} units and different alkaline-carboxyl- alkaline-earth rod building units with different topologies; while, compound 7 was constructed by Cu{sub 2}I units and alkaline-carboxyl- alkaline-earth honeycomb layers. The photoluminscent investigations revealed that the compounds 1, 3, 5 and 6 emitted strong yellow, while compounds 2, 4 and 7 emitted strong orange light.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Fluorescence of Zinc Complex with N,N'-Bis(5-Bromosalicylidene)Ethylenediamine

A Zn(II) complex with N,N'-bis(5-bromosalicylidene)ethylenediamine exhibiting intense visible blue luminescence is synthesized. It is found that the zinc complex fluoresces at 293 K in both polycrystalline form and in solutions (λ{sub max} = 440 and 450 nm, respectively); the relative fluorescence quantum yields of the complex are determined in dilute ethanol, dimethylformamide, and dimethylsulfoxide solutions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Polyacrylonitrile Interactions with Carbon Nanotubes in Solution: Conformations and Binding as a Function of Solvent, Temperature, and Concentration

Abstract Polyacrylonitrile (PAN) is among the most promising precursor polymers to produce strong and lightweight carbon fiber. Conformations in solution and the extent of binding to carbon nanotubes (CNTs) are critical during gel spinning and for alignment of graphitic layers upon carbonization. Here, quantitative insights into these processes are reported using molecular dynamics simulations at the atomic scale including virtual π electrons and comparisons to experimental data. Common solvents for fiber spinning induce significant differences in PAN conformation in dilute solutions at 25 °C with persistence lengths between 0.5 and 2 nm. Variations in conformation become smaller at 75 °C, in the presence of CNTs, and at higher PAN concentration. “Aging” of PAN conformations in dimethylformamide and dimethylsulfoxide at higher temperature is explained and a correlation between extended polymer conformations and increased binding to CNTs is identified in dilute solutions. PAN is overall barely attracted to CNTs under common solution conditions and enters significant surface contact only at higher concentration as solvent is physically removed. The impact of temperature is small, whereby binding increases at lower temperatures. The results provide guidance to control interactions of polymers with CNTs to induce distinct conformations and specific binding at the early stages of assembly.

Pramanik, Chandrani↗

Coordination Chemistry as a Universal Strategy for a Controlled Perovskite Crystallization

The most efficient and stable perovskite solar cells (PSCs) are made from complex mixture of precursors, which are practically always dissolved in combinations of the volatile (and toxic) N, N-Dimethylformamide (DMF), and the non-volatile (and green) dimethyl sulfoxide (DMSO) solvents. Typically, to then form a thin film, an extreme oversaturation of the perovskite precursor is initiated to trigger nucleation sites, e.g. by vacuum, an airstream or a so-called antisolvent. Unfortunately, most such oversaturation triggers do not expel the lingering (and highly coordinating) DMSO, which is highly coordinating, from the thin films; this detrimentally affects long-term stability. Here, for the first time, we introduce (the green) dimethyl sulfide (DMS) as a novel nucleation trigger for perovskite films combining, uniquely, high coordination and high vapor pressure. More precisely, DMS coordinates more strongly than all currently used solvents, hence replacing them, including DMSO, effectively during film formation. Crucially, DMS also has among the highest vapor pressures reported in literature, thus effectively leaving the thin film shortly after formation. This gives DMS a universal scope: DMS replaces other solvents by coordinating more strongly and removes itself once the film formation is finished. To demonstrate this novel coordination chemistry approach, we process MAPbI 3 PSCs, typically dissolved in hard-to-remove (and green) DMSO achieving 21.6% efficiency, among the highest reported efficiencies for this system. To confirm the universality of our strategy, we tested DMS for FAPbI 3 as another composition, which showed higher efficiency of 23.5% compared to 20.9% for fabricated device with CB. Finally, this work provides a universal strategy to control perovskite crystallization using coordination chemistry heralding the revival of perovskite compositions with pure DMSO, such as MAPbI 3 .

36 MATERIALS SCIENCE↗

Role of Solvent in the Oriented Growth of Conductive Ni‐CAT‐1 Metal‐Organic Framework at Solid–Liquid Interfaces

Abstract A controlled growth of two‐dimensional (2D) π‐conjugated metal‐organic frameworks (MOFs) on solid substrates can open exciting opportunities for the application of 2D MOFs as optoelectronic devices. Some factors like solvent composition and type of substrates are known to influence the properties of solution‐processed 2D MOF crystals; however, a mechanistic understanding of how interactions between solvent, substrate, and precursors affect heterogeneous nucleation has been limited. Here, it is reported that the structure of Ni‐catecholate (Ni‐CAT‐1) MOFs at a solid–liquid interface is controlled by solvent–substrate and solvent–MOF precursor interactions. Specifically, the structure of the MOF film can be controlled by varying the affinity of the solvent to the substrate. As a fraction of N , N ‐dimethylformamide (DMF) in a binary solvent mixture of water and DMF increases, the arrangement of Ni‐CAT‐1 crystals varies from vertically aligned nanorods to the graphite substrate to less ordered nanorods with the lower initial nucleation number density of Ni‐CAT‐1 crystals on the surface.

2D materials↗

Crosslinked Poly(tetrahydrofuran) as a Loosely Coordinating Polymer Electrolyte

Abstract Solid polymer electrolytes (SPEs) promise to improve the safety and performance of lithium ion batteries (LIBs). However, the low ionic conductivity and transference number of conventional poly(ethylene oxide) (PEO)‐based SPEs preclude their widespread implementation. Herein, crosslinked poly(tetrahydrofuran) (xPTHF) is introduced as a promising polymer matrix for “beyond PEO” SPEs. The crosslinking procedure creates thermally stable, mechanically robust membranes for use in LIBs. Molecular dynamics and density functional theory (DFT) simulations accompanied by 7 Li NMR measurements show that the lower spatial concentration of oxygen atoms in the xPTHF backbone leads to loosened O–Li + coordination. This weakened interaction enhances ion transport; xPTHF has a high lithium transference number of 0.53 and higher lithium conductivity than a xPEO SPE of the same length at room temperature. It is demonstrated that organic additives further weaken the O–Li + interaction, enabling room temperature ionic conductivity of 1.2 × 10 −4 S cm −1 with 18 wt% N,N ‐dimethylformamide in xPTHF. In a solid‐state LIB application, neat xPTHF SPEs cycle with near theoretical capacity for 100 cycles at 70 °C, with rate capability up to 1 C. The plasticized xPTHF SPEs operate at room temperature while maintaining respectable rate capability and capacity. The novel PTHF system demonstrated here represents an exciting platform for future studies involving SPEs.

Mackanic, David G.↗

Photomagnetic Switching of Heterometallic Complexes [M(dmf)[subscript 4](H[subscript 2]O)[subscript 3]([mu]-CN)Fe(CN)[subscript 5]]H[subscript 2]O (M=Nd, La, Gd, Y) Analyzed by Single-Crystal X-ray Diffraction and Ab Initio Theory

Single-crystal X-ray diffraction measurements have been carried out on [Nd(dmf){sub 4}(H{sub 2}O){sub 3}({mu}-CN)Fe(CN){sub 5}]{center_dot}H{sub 2}O (1; dmf=dimethylformamide), [Nd(dmf){sub 4}(H{sub 2}O){sub 3}({mu}-CN)Co(CN){sub 5}]{center_dot}H{sub 2}O (2), [La(dmf){sub 4}(H{sub 2}O){sub 3}({mu}-CN)Fe(CN){sub 5}]{center_dot}H{sub 2}O (3), [Gd(dmf){sub 4}(H{sub 2}O){sub 3}({mu}-CN)Fe(CN){sub 5}]{center_dot}H{sub 2}O (4), and [Y(dmf){sub 4}(H{sub 2}O){sub 3}({mu}-CN)Fe(CN){sub 5}]{center_dot}H{sub 2}O (5), at 15(2) K with and without UV illumination of the crystals. Significant changes in unit-cell parameters were observed for all the iron-containing complexes, whereas 2 showed no response to UV illumination. Photoexcited crystal structures have been determined for 1, 3, and 4 based on refinements of two-conformer models, and excited-state occupancies of 78.6(1), 84(6), and 86.6(7) % were reached, respectively. Significant bond-length changes were observed for the Fe-ligand bonds (up to 0.19 {angstrom}), the cyano bonds (up to 0.09{angstrom}), and the lanthanide-ligand bonds (up to 0.10{angstrom}). Ab initio theoretical calculations were carried out for the experimental ground-state geometry of 1 to understand the electronic structure changes upon UV illumination. The calculations suggest that UV illumination gives a charge transfer from the cyano groups on the iron atom to the lanthanide ion moiety, {l_brace}Nd(dmf){sub 4}(H{sub 2}O){sub 3}{r_brace}, with a distance of approximately 6 {angstrom} from the iron atom. The charge transfer is accompanied by a reorganization of the spin state on the {l_brace}Fe(CN)6{r_brace} complex, and a change in geometry that produces a metastable charge-transfer state with an increased number of unpaired electrons, thus accounting for the observed photomagnetic effect.

36 MATERIALS SCIENCE↗

Synthesis and Characterization of a Masked Terminal Nickel-Oxide Complex

In exploring terminal nickel-oxo complexes, postulated to be the active oxidant in natural and non-natural oxidation reactions, we report the synthesis of the pseudo-trigonal bipyramidal Ni II complexes (K)[Ni II (L Ph )(DMF)] (1[DMF]) and (NMe 4 ) 2 [Ni II (L Ph )(OAc)] (1[OAc]) (L Ph =2,2’,2’’-nitrilo-tris-(N-phenylacetamide); DMF=N,N-dimethylformamide; - OAc=acetate). Both complexes were characterized using NMR, FTIR, ESI-MS, and X-ray crystallography, showing the L Ph ligand to bind in a tetradentate fashion, together with an ancillary donor. The reaction of 1[OAc] with peroxyphenyl acetic acid (PPAA) resulted in the formation of [(L Ph )Ni III -O-H∙∙∙OAc] 2- , 2, that displays many of the characteristics of a terminal Ni=O species. 2 was characterized by UV-Vis, EPR, and XAS spectroscopies and ESI-MS. 2 decayed to yield a Ni II -phenolate complex 3 (through aromatic electrophilic substitution) that was characterized by NMR, FTIR, ESI-MS, and X-ray crystallography. 2 was capable of hydroxylation of hydrocarbons and epoxidation of olefins, as well as oxygen atom transfer oxidation of phosphines at exceptional rates. While the oxo-wall remains standing, this complex represents an excellent example of a masked metal-oxide that displays all of the properties expected of the ever elusive terminal M=O beyond the oxo-wall.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗