Search NASA⌕ Search

SEARCH · Search NASA

Results for “DOLOMITE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Simulated CO 2 storage efficiency factors for saline formations of various lithologies and depositional environments using new experimental relative permeability data

Saline formations are attractive geologic reservoirs for permanent carbon dioxide (CO 2 ) storage. Here, the U.S. Department of Energy's National Energy Technology Laboratory (DOE-NETL) has worked to develop and refine methods and tools for the calculation of CO 2 storage potential in subsurface reservoirs. DOE-NETL's CO 2 -SCREEN provides an online tool for executing these storage methods. CO 2 storage efficiency terms are input parameters in DOE-NETL's methods and equations embedded in the CO 2 -SCREEN, which assesses pore space available for CO 2 storage. In this work, a modeling workflow was initiated to refine two CO 2 storage efficiency terms - volumetric displacement (E V ) and microscopic displacement (E d ). The models are based on new experimental relative permeability data that are specific to homogenous lithology and depositional environments of key subsurface saline formations targeted for CO 2 storage. In future work, heterogenous features will be added to this initial modeling effort to update efficiency factors as described in DOE-NETL's methods and CO 2 -SCREEN tool. E V accounts for the volume utilized in the reservoir under the areal plume, while E d accounts for saturation values in the plume to assess efficiency of CO 2 storage at the pore scale. The results of this work are significant in that prior values were based on a limited geologically non-specific relative permeability data set that were collected prior to 2009. Specifically, we applied numerical simulations using TOUGH3 models to update CO 2 storage efficiency values for supercritical CO 2 injection into brine-saturated reservoirs for three lithologies (clastics, limestone, dolomite) and six depositional environments (Marginal Marine, Strand Plain, Deltaic Complex Fluvial, Aeolian, Shallow Marine, and Reef) that have a high potential for geologic CO 2 storage. Experimental relative permeability data in cores from these environments were utilized in the models with corresponding rock type/sedimentary environment. Results of this study showed that dolomite followed by limestone generated higher ranges of storage efficiency compared to clastics. The updated values provided a tighter efficiency range for clastics, lower P 10 but higher P 90 range for limestone, and higher P 10 and P 90 for dolomite. In general, tighter reservoirs with relatively low permeability and porosity were associated with higher E V and E d , showing efficient reservoir and pore utilization in these scenarios. High reservoir pressure and temperature associated with increasing depth increased the E V , and high CO 2 injection rates resulted in increases in E V and E d , while the impact of permeability anisotropy was minimal after the 30-year injection period.

03 NATURAL GAS↗
DOE OSTI2023

Grain boundary widening controls siderite (FeCO3) replacement of limestone (CaCO3)

Abstract The microstructure of minerals and rocks can significantly alter reaction rates. This study focuses on identifying transport paths in low porosity rocks based on the hypothesis that grain boundary widening accelerates reactions in which one mineral is replaced by another (replacement reaction). We conducted a time series of replacement experiments of three limestones (CaCO 3 ) of different microstructures and solid impurity contents using FeCl 2 . Reacted solids were analyzed using chemical imaging, small angle X-ray and neutron scattering and Raman spectroscopy. In high porosity limestones replacement is reaction controlled and complete replacement was observed within 2 days. In low porosity limestones that contain 1–2% dolomite impurities and are dominated by grain boundaries, a reaction rim was observed whose width did not change with reaction time. Siderite (FeCO 3 ) nucleation was observed in all parts of the rock cores indicating the percolation of the solution throughout the complete core. Dolomite impurities were identified to act as nucleation sites leading to growth of crystals that exert force on the CaCO 3 grains. Widening of grain boundaries beyond what is expected based on dissolution and thermal grain expansion was observed in the low porosity marble containing dolomite impurities. This leads to a self-perpetuating cycle of grain boundary widening and reaction acceleration instead of reaction front propagation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Surfactant-Aided Low-Salinity Waterflooding for Low-Temperature Carbonate Reservoirs

Carbonate reservoirs tend to be oil-wet/mixed-wet and heterogeneous because of mineralogy and diagenesis. The objective of this study is to improve oil recovery in low-temperature dolomite reservoirs using low-salinity and surfactant-aided spontaneous imbibition. The low-salinity brine composition was optimized using ζ-potential measurements, contact-angle (CA) experiments, and a novel wettability-alteration measure. Significant wettability alteration was observed on dolomite rocks at a salinity of 2,500 ppm. We evaluated 37 surfactants by performing CA, interfacial-tension (IFT), and spontaneous-imbibition experiments. Here, three (quaternary ammonium) cationic and one (sulfonate) anionic surfactants showed significant wettability alteration and produced 43–63% of original oil in place (OOIP) by spontaneous imbibition. At a low temperature (35°C), oil recovery by low-salinity effect is small compared with that by wettability-altering surfactants. Coreflood tests were performed with a selected low-salinity cationic surfactant solution. A novel coreflood was proposed that modeled heterogeneity and dynamic imbibition into low-permeability regions. The results of the “heterogeneous” coreflood were consistent with that of spontaneous-imbibition tests. These experiments demonstrated that a combination of low-salinity brine and surfactants can make originally oil-wet dolomite rocks more water-wet and improve oil recovery from regions bypassed by waterflood at a low temperature of 35°C.

02 PETROLEUM↗
DOE OSTI2020

Potential Formation Damage: An Integrated Reservoir Characterization Study of the Naturally Fractured Carbonate Middle Duperow Formation at the Kevin Dome, Montana

In this study, we integrate geologic and engineering data of a naturally fractured carbonate reservoir at the Kevin Dome, Montana. Well test data are correlated with core description, geochemical and lithology study to determine the flow behavior and communication within the injection test interval and to the surrounding area. Based on a dual-continuum geologic model, numerical brine injection simulations are carried out to validate the interpretation results from our well test analytical models and forecast the probability of CO 2 injection success using current reservoir properties. As a result, our well test analytical models as well as lithology/core description suggest that fluid flow may be mainly restricted to the injection interval and the assumption of radial (horizontal) flow may be appropriate. The well test models also indicate that there is potentially formation damage with a positive skin factor although prior to brine injection well tests, well stimulation through acid treatment was performed. Our numerical simulation results appear to confirm this formation damage by showing additional pressure buildup in the injection data during later test periods. To explain this, acid may have dissolved dolomite then dolomite or calcite may have been formed again further into the matrix/fracture system. Another possible explanation is mechanical clogging of the fractures due to acid dissolving dolomite and dislodging fine grains. Our work also predicts that if no additional well stimulation is performed, the project will have a lower probability of successfully injecting 1 million tons of CO 2 into the Middle Duperow formation over 4 years.

42 ENGINEERING↗
DOE OSTI2022

Wabash CarbonSAFE Static and Dynamic Modeling: Task 9.0 (Technical Report)

The objective of the Wabash CarbonSAFE project’s static and dynamic modeling task is to assess the feasibility of storing 50 million tonnes (1.67 million metric tonnes annually; MMTA) of industrially-sourced carbon dioxide (CO 2 ) in a commercial-scale geological storage complex at Wabash Valley Resources LLC (WVR) gasification facility near Terre Haute, Indiana over a period of 30 years. The targeted formations for storing CO 2 are: 1) Mt. Simon Sandstone (MSS) and the 2) Potosi Dolomite (Knox Group). All of the available data from the recently drilled Wabash #1 stratigraphic test well (now plugged and abandoned) were used in the construction of both the static and dynamic models. Geologic models were constructed to characterize both the Mt. Simon Sandstone and Potosi Dolomite storage complexes. Dynamic simulation models were constructed and used to assess the feasibility of injecting CO 2 into the Mt. Simon and Potosi formations. The geocellular models for the Potosi Dolomite and Mt. Simon Sandstone were built using Petrel™, Schlumberger’s reservoir modeling software. The dynamic simulations were run using Landmark’s Nexus ® reservoir simulation software.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗
DOE OSTI2021

Tools for uranium characterization in carbonate samples: case studies of natural U–Pb geochronology reference materials

Laser ablation U–Pb analyses of carbonate (LAcarb) samples has greatly expanded the potential for U–Pb dating to a variety of carbonate-producing settings. Carbonates that were previously considered impossible to date using isotope dilution methods may preserve radiogenic domains that can be dated using spatially resolved laser ablation geochronology techniques. Work is ongoing to identify reference materials and to consider best practices for LAcarb. In this study we apply standard and emerging characterization tool sets on three natural samples with the dual goal of enhancing the study of carbonates and establishing a new set of well-characterized natural reference materials for LAcarb studies. We start with the existing carbonate reference material WC-1 from the Permian Reef Complex of Texas, building on the published description to offer a deeper look at U and associated trace elements. We consider a tufa sample from the Miocene Barstow Formation of the Mojave Block, California, as a possible secondary calcite reference material due to its well-behaved U–Pb systematics. There are currently no natural dolomite standards. We present an unusual dolomite sample with very well-behaved U–Pb systematics from the Miocene of the Turkana Basin of Kenya as a possible dolomite reference material for LAcarb dating. In addition to using X-ray fluorescence (XRF) mapping and spectroscopy to better understand U in these natural samples, we have analyzed multiple aliquots of each of them for 87 Sr/ 86 Sr by thermal ionization mass spectrometry (TIMS). The Sr isotope compositions are analytically homogeneous within petrographically homogeneous regions of all three samples, and thus these materials could be used as Sr isotope standards as well. While not part of the current contribution, this combination could streamline simultaneous LA analyses of 87 Sr/ 86 Sr and U–Pb geochronology.

36 MATERIALS SCIENCE↗
NASA NTRS2002

Major Element Analysis of the Target Rocks at Meteor Crater, Arizona

We collected approximately 400 rock chips in continuous vertical profile at Meteor Crater, Arizona, representing, from bottom to top, the Coconino, Toroweap, Kaibab, and Moenkopi Formations to support ongoing compositional analyses of the impact melts and their stratigraphic source depth(s) and other studies at Meteor Crater that depend on the composition of the target rocks. These rock chips were subsequently pooled into 23 samples for compositional analysis by XRF (x ray fluorescence) methods, each sample reflecting a specific stratigraphic "subsection" approximately 5-10 in thick. We determined the modal abundance of quartz, dolomite, and calcite for the entire Kaibab Formation at vertical resolutions of 1-2 meters. The Coconino Formation composes the lower half of the crater cavity. It is an exceptionally pure sandstone. The Toroweap is only two inches thick and compositionally similar to Coconino, therefore, it is not a good compositional marker horizon. The Kaibab Formation is approximately 80 in thick. XRD (x ray diffraction) studies show that the Kaibab Formation is dominated by dolomite and quartz, albeit in highly variable proportions; calcite is a minor phase at best. The Kaibab at Meteor Crater is therefore a sandy dolomite rather than a limestone, consistent with pronounced facies changes in the Permian of SE Arizona over short vertical and horizontal distances. The Moenkopi forms the 12 in thick cap rock and has the highest Al2O3 and FeO concentrations of all target rocks. With several examples, we illustrate how this systematic compositional and modal characterization of the target ideologies may contribute to an understanding of Meteor Crater, such as the depth of its melt zone, and to impact cratering in general, such as the liberation of CO2 from shocked carbonates.

See, Thomas H.↗
NASA NTRS1995

Stable isotopic compositions of carbonates from the Mesoproterozoic Bangemall Group, northwestern Australia

Marine carbonate rocks from the Mesoproterozoic Bangemall Group of northwestern Australia show little deviation (+/-1.3%) in whole-rock delta 13C(carb)-values about a mean of -0.5%. This narrow range persists despite close sampling (every 10-20 m) through long sections (up to 2500 m) that are geographically widespread (up to 250 km apart), over many depositional environments (supralittoral to outer shelf), sediment sources (stromatolitic bioherms to detrital calcilutites) and rock types (pure limestones to dolomitic shales). The only major excursions from the norm seem related to unusual environmental or post-depositional processes, as they are correlated with large enrichments (to -3%) or depletions (to -16%) in 18O. Relatively heavy delta 13C-values, up to +2.5%, occur in a single bed of brecciated ferruginous dolostone at a single locality; these abnormal values may result from local evaporitic conditions. Limey and shaley nodular dolostones have delta 13C-values as low as -4.3%, probably caused by remineralization of organic matter during late and patchy dolomitization. Most notably, sharp negative excursions in delta 13C, up to -8.4%, occur in bleached kerogen-free rocks with mineral assemblages of dolomite + quartz + calcite +/- tremolite + talc, reflecting isotopic re-equilibration in thick metamorphic aureoles around dolerite intrusions. General environmental variations are minor, with delta 13C-values of peritidal facies tending to be slightly positive whereas those of subtidal facies are slightly negative. There are no strong secular trends, but subtle fluctuations within the range -2 to +l% can be correlated along the northwestern margin of the basin. This resembles the pattern seen in other Mesoproterozoic successions, but is markedly unlike the heavy background (> +5%) and extreme variations (up to l0%) in delta 13C evident in Neoproterozoic successions of similar thickness and environmental setting. Hence, in contrast to the Neoproterozoic, the global rate of organic carbon burial was probably fairly constant during deposition of the Bangemall Group, and perhaps generally during the Mesoproterozoic, as was the redox state of the atmosphere and hydrosphere.

Non-NASA Center↗
NASA NTRS1990

Carbonate deposition during the late Proterozoic Era: an example from Spitsbergen

Carbonate sediments reflect the physico-chemical and biological circumstances of their formation; thus, features of limestones and dolomites may provide insights into both environmental and evolutionary change through geological time. The Upper Proterozoic (approx 800-700 Ma) Akademikerbreen Group, Spitsbergen, comprises 2000 m of carbonates, with only minor intercalations of quartz arenite and shale. Although Proterozoic carbonates are often seen as predominantly dolomitic, the Akademikerbreen Group is about 45 percent limestone. Stromatolites are conspicuous in outcrop but constitute only 25 percent of the total section. Micrites and coarser intraclastic carbonates derived mainly from micritric precursors comprise 60 percent of the group, while oolites make up the remaining 15 percent. Distinctive sedimentary features of the group include giant (up to 16 mm) ooids, very early diagenetic calcite nodules and cements, micrites containing subaqueous shrinkage cracks filled with equant microspar cement, and strong 13C enrichment in both carbonates and co-occurring organic matter. The principal features of Akademikerbreen carbonates are widely distributed in coeval successions. However, these rocks appear to differ from older limestones and dolomites in their relative abundance of grainstones and, perhaps, micrites, as well as their paucity of tufa-like laminates and columnar or coniform stromatolites that preserve petrographic evidence of in situ precipitation as a dominant means of carbonate accretion. Upper Proterozoic carbonates also differ from Paleozoic accumulations, but the transition is not abrupt. Most changes accompanying the Proterozoic/Phanerozoic transition can be interpreted in terms of the consequences rather than the causes of metazoan and metaphyte evolution, including the evolution of biomineralization. Carbonate sedimentology reinforces data from other sources which indicate the last 200 to 300 Ma of the Proterozoic Eon was a distinctive interval of Earth history.

NASA Discipline Number 52-30↗
NASA NTRS2008

Remote Raman Spectroscopy of Minerals at Elevated Temperature Relevant to Venus Exploration

We have used a remote time-resolved telescopic Raman system equipped with 532 nm pulsed laser excitation and a gated intensified CCD (ICCD) detector for measuring Raman spectra of a number of minerals at high temperature to 970 K. Remote Raman measurements were made with samples at 9-meter in side a high-temperature furnace by gating the ICCD detector with 2 micro-sec gate to minimize interference from blackbody emission from mineral surfaces at high temperature as well as interference from ambient light. A comparison of Raman spectra of gypsum (CaSO4.2H2O), dolomite (CaMg(CO3)2), and olivine (Mg2Fe2-xSiO4), as a function of temperature shows that the Raman lines remains sharp and well defined even in the high-temperature spectra. In the case of gypsum, Raman spectral fingerprints of CaSO4.H2O at 518 K were observed due to dehydration of gypsum. In the case of dolomite, partial mineral dissociation was observed at 973 K at ambient pressure indicating that some of the dolomite might survive on Venus surface that is at approximately 750 K and 92 atmospheric pressure. Time-resolved Raman spectra of low clino-enstatite (MgSiO3) measured at 75 mm from the sample in side the high-temperature furnace also show that the Raman lines remains sharp and well defined in the high temperature spectra. These high-temperature remote Raman spectra of minerals show that time-resolved Raman spectroscopy can be used as a potential tool for exploring Venus surface mineralogy at shorter (75 mm) and long (9 m) distances from the samples both during daytime and nighttime. The remote Raman system could also be used for measuring profiles of molecular species in the dense Venus atmosphere during descent as well as on the surface.

Sharma, Shiv K.↗
DOE OSTI2021

Enabling phase quantification of anhydrous cements via Raman imaging

The phase composition of Portland cements is typically determined using conventional techniques like X-ray Diffraction (XRD) Rietveld analysis, optical microscopy point counting, and electron microscopy. However, these techniques have several limitations that may affect their accuracy in certain sample-specific scenarios. Here, we report a highly accurate phase quantification of 11 different types of commercial, anhydrous cements using a new and complementary technique: Raman imaging. Specifically, for the 4 principal phases, composition from our extensive data (250,000 Raman spectra per sample, error < 0.71%) and those obtained from XRD Rietveld and supplier data have high coefficients of determination (R{sup 2} > 0.98, mean deviation <2%). Additionally, we also quantify 8 secondary phases present in cement clinkers (gypsum, anhydrite, bassanite, syngenite, dolomite, calcite, quartz, and portlandite) with a high degree of confidence, thereby demonstrating that Raman imaging is a highly versatile tool for anhydrous phase quantification in a broad variety of cements.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Geochemical Assessment for Carbon Sequestration in the Conasauga Group, Northwest Georgia, USA

Sedimentary geological formations are known to be great candidates for geological carbon sequestration. Published studies suggest the southeast of the United States contains many formations suitable for carbon storage. The Cassville 1 Stratigraphic Borehole well could act as a potential carbon reservoir for nearby energy resource facilities in Georgia, United States. Although studies have shown that porous formations are adequate for geological carbon sequestration, it is important to understand possible geochemical reactions between CO 2 and the targeted geological formation before injecting any fluids. In this study, a sandstone sample from the Cassville 1 well is being considered for geological carbon sequestration in the Conasauga Group in Northwest Georgia. Here, the collected sandstone sample, consisting of quartz, K-feldspar, micas, kaolinite, and carbonate minerals such as calcite and dolomite, has a 6% porosity. Leveraging the formation composition and porosity, a one-dimensional continuum reactive transport model was built using CrunchFlow to assess possible geochemical reactions between injected CO 2 and the geological formation. Simulation results show that the carbonate minerals, calcite and dolomite, dissolve during the injection period of 10,000 days, increasing formation porosity from 6% to as much as 30%. The rate and extent of carbonate mineral dissolution and resulting porosity increase are highly sensitive to mineral reactive surface area values. No evidence of mineral precipitation was observed, suggesting that dissolution reactions will control porosity evolution during the CO 2 injection period.

42 ENGINEERING↗
DOE OSTI2020

Large isotopic variability at the micron-scale in ‘Shuram’ excursion carbonates from South Australia

Ediacaran-aged (635–541 million years ago) marine sediments contain a large negative carbon isotope (δ 13 C) excursion, in which carbonate δ 13 C values reach -12‰ (VPDB). Known as the ‘Shuram’ excursion, many workers have interpreted this δ 13 C record as an unprecedented perturbation to the global carbon cycle, leading to speculation about a causal connection to the broadly contemporaneous rise of animal life. Others have interpreted the δ 13 C signal as a product of diagenesis, thereby minimizing its relevance for understanding the evolution of metazoans. In this work, we present SEM imaging and in-situ δ 13 C and δ 18 C values measured by secondary ion mass spectrometry (SIMS) to assess these competing hypotheses in the Wonoka Formation of South Australia. Our results from the minimum of the excursion show that rounded sedimentary grains of calcite have δ 13 C values between -12.8 to -10.6‰ and δ 18 C values between 17.8 to 15.5‰ (VPDB). Euhedral dolomite that appears to have grown unimpeded in open sedimentary pore spaces also is present. These early-stage dolomites are interpreted as early authigenic in origin and have δ 13 C values that reach +5‰, requiring a formation fluid with a substantially different δ 13 C composition from basin waters or bulk sediment. Together, these results provide little evidence for the hypothesis that a late diagenetic overprint has generated the ‘Shuram’ excursion in the Wonoka. Instead, they suggest the presence of a large carbon isotopic gradient in the surface environment, with shallow waters capable of precipitating carbonates with very low δ 13 C (down to 12‰) and deeper shelf and/or marine pore waters generating carbonates with positive carbon isotope values (up to +5‰). Because negative isotope excursions of similar magnitude are found in widely dispersed Ediacaran basins, it is likely that this gradient was characteristic of shelf environments of this period and that a still-unknown global process led to the ‘Shuram’ excursion in shallow water carbonates.

58 GEOSCIENCES↗
DOE OSTI2021

Machine learning to discover mineral trapping signatures due to CO 2 injection

Mineral trapping is pursued as a geological CO 2 sequestration (GCS) mechanism because it permanently stores CO 2 in solid phases or minerals. However, CO 2 mineral-trapping mechanisms are poorly understood due to (1) lack of sufficient field and laboratory data characterizing these complex processes, and (2) challenges to develop site-specific reactive-transport models coupling fluid flow and geochemical reactions occurring at various temporal (from milliseconds to years) and spatial (from pore (millimeters) to field (kilometers)) scales. Reactive transport with additional complexities such as heterogeneity can make the simulation outputs even more difficult to interpret because of complex nonlinearity and multi-scale interdependencies. Furthermore, the values of model outputs such as concentrations can vary by several orders of magnitude, making it harder to correlate and characterize the impact of the variables via traditional data interpretation techniques such as exploratory data analyses. Recently, machine learning (ML) has shown promise in feature discovery and in highlighting hidden mechanisms that cannot be obtained by existing data-analytics and statistical methods. In this study, we applied an unsupervised ML approach, non-negative matrix factorization with custom -means clustering (NMF) to the data generated by reactive-transport simulations of GCS. The reactive-transport data consisted of 19 attributes, including four physio-chemical variables (pH, porosity, aqueous CO 2 , and sequestered CO 2 ), six chemical species (K + , Na + , HCO, Ca 2+ , Mg 2+ , Fe 2+ ), and four carbonate minerals (calcite, dolomite, siderite, and ankerite), a feldspar mineral (albite), and four clay minerals (illite, clinochlore, kaolinite, and smectite) over a period of 200 years of simulation time. Furthermore, the simulation data used was for Morrow B sandstone at the Farnsworth hydrocarbon unit in Texas. Data are sampled at two locations within the model domain: (1) at the injection well and (2) 200 m west of the injection well. The injection was performed for a period of 10 years. Using NMF, we estimated the temporal interdependencies among the 19 attributes over a span of 200 years. We found that NMF was able to identify four reaction stages and their dominant attributes; these cannot be directly discerned through traditional visualization (e.g., line plots, Pareto analysis, Glyph-based visualization methods) or exploratory data analysis tools of the simulation data. The four stages were: reactions in the injection phase followed by short-, mid-, and long-term reactions. The NMF analysis also revealed that 10 among the 19 attributes are dominant. These dominant attributes for mineral trapping include calcite, dolomite at injection well, siderite at 200 m away from the injection well, clinochlore, kaolinite, Na + , K + , Ca 2+ , Mg 2+ , pH, and aqeuous CO 2 . Finally, at late times (65–200 years), our results showed that calcite plays a major role in mineral trapping with insignificant contribution from siderite, ankerite, and clay minerals. These findings make the proposed unsupervised ML-model attractive for reactive-transport sensing towards real-time GCS monitoring.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

Carbonate Minerals and Dissimilatory Iron-Reducing Organisms Trigger Synergistic Abiotic and Biotic Chain Reactions under Elevated CO 2 Concentration

Increasing CO 2 emission has resulted in pressing climate and environmental issues. While abiotic and biotic processes mediating the fate of CO 2 have been studied separately, their interactions and combined effects have been poorly understood. To explore this knowledge gap, an iron-reducing organism, Orenia metallireducens, was cultured under 18 conditions that systematically varied in headspace CO 2 concentrations, ferric oxide loading, and dolomite (CaMg(CO 3 ) 2 ) availability. The results showed that abiotic and biotic processes interactively mediate CO 2 acidification and sequestration through "chain reactions", with pH being the dominant variable. Specifically, dolomite alleviated CO 2 stress on microbial activity, possibly via pH control that transforms the inhibitory CO 2 to the more benign bicarbonate species. The microbial iron reduction further impacted pH via the competition between proton (H + ) consumption during iron reduction and H + generation from oxidization of the organic substrate. Under Fe(III)-rich conditions, microbial iron reduction increased pH, driving dissolved CO 2 to form bicarbonate. Spectroscopic and microscopic analyses showed enhanced formation of siderite (FeCO 3 ) under elevated CO 2 , supporting its incorporation into solids. In conclusion, the results of these CO 2 -microbe-mineral experiments provide insights into the synergistic abiotic and biotic processes that alleviate CO 2 acidification and favor its sequestration, which can be instructive for practical applications (e.g., acidification remediation, CO 2 sequestration, and modeling of carbon flux).

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

Investigation of Coupled Processes in Fractures and the Bordering Matrix via a Micro‐Continuum Reactive Transport Model

Abstract In multi‐mineral fractured rocks, the altered porous layer on the fracture surface resulting from preferential dissolution of the fast‐reacting minerals can have profound impacts on subsequent chemical‐physical alteration of the fractures. This study adopts the micro‐continuum approach to provide further understanding of reactive transport processes in the altered layer (AL), and mass exchanges with the bordering matrix and fracture. The modeling framework couples the Darcy‐Brinkman‐Stokes (DBS) solver in COMSOL Multiphysics and the geochemical modeling capability of CrunchFlow. Three‐dimensional steady state simulations with systematically varied chemical‐physical parameters of the AL were performed to examine the impacts of individual factors and processes. Our simulation results confirm previous observations that dissolution of the fast‐reacting mineral (i.e., calcite) is largely controlled by diffusion across the AL. We also show that dissolution of the slow‐reacting mineral (i.e., dolomite), which controls AL development and fracture enlargement, increases with surface area and has a complex dependence on different local rate‐limiting processes. In particular, advection can result in evident spatial variations in the local dissolution rates of dolomite, although it does not affect the bulk chemistry significantly. The difference in the spatial patterns between simulations with and without advection in the AL is more noticeable in the locations with smaller apertures, with up to 20% difference in local reaction rates. Therefore, it is important to include a full depiction of advection, diffusion, and reactions for accurately capturing local dynamics that control long‐term fracture evolution.

58 GEOSCIENCES↗
DOE OSTI2025

Iron XANES measurements of carbonates and phyllosilicates in CM chondrites: A record of redox conditions during aqueous alteration

Multiple generations of calcite and dolomite precipitated in CM chondrites during ice melting events that led to episodes of liquid water. Models and laboratory analysis have suggested a long-term transition from oxidizing to reducing conditions during aqueous alteration on the CM parent body. We found that synchrotron X-ray absorption near edge spectroscopy (XANES) can detect relative differences in the oxidation state of trace iron within these carbonates. In CM chondrites, previous work interpreted Mn abundance in calcite as an indicator of relatively early or late formation, and dolomite is understood to form relatively late. In the CM1 chondrite Meteorite Hills 01070, XANES maps reveal that Mn-poor calcite contains more oxidized iron relative to Mn-rich calcite. While these measurements of carbonates support increasing iron reduction with progressive aqueous alteration in MET 01070, comparison among different CM chondrites suggests a complex picture of redox evolution. In addition to carbonates, we performed XANES measurements of the phyllosilicate-rich matrix of Allan Hills 83,100. Pre-edge centroid analysis indicates that this CM1/2 has an oxidation state similar to typical CM2 chondrites. While additional measurements are warranted to confirm the full span of redox trends in CM carbonates, our data do not support a correlation between redox state and petrologic type.

Bailey, Elizabeth [Univ. of California, Santa Cruz↗
DOE OSTI2022

Wabash CarbonSAFE: Detailed Site Characterization Plan, Task 11.0, Technical Report

Wabash CarbonSAFE established that commercial-scale CO 2 storage in the Potosi Dolomite –Maquoketa Group storage complex associated with the Wabash Valley Resources (WVR) plant site near Terre Haute, IN is highly feasible. The CarbonSAFE project team performed this evaluation through extensive data acquisition and analysis including 2D seismic reflection data, wireline logs, well testing, and core/cuttings from the Wabash #1 stratigraphic test well (now plugged and abandoned). This document summarizes work detailed in separate Wabash CarbonSAFE reports and consolidates the geologic characterization, well testing, and storage complex modeling results for the Mt. Simon Sandstone and Potosi Dolomite, two distinct reservoirs characterized at the Wabash CarbonSAFE project site. The report then presents recommendations for the next steps for site characterization, identifies data gaps for future activities, and provides an overall assessment of site potential.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗