Search NASA⌕ Search

SEARCH · Search NASA

Results for “Direct numerical simulation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3

Estimating uncertainties in statistics computed from direct numerical simulation

Rigorous assessment of uncertainty is crucial to the utility of direct numerical simulation (DNS) results. Uncertainties in the computed statistics arise from two sources: finite statistical sampling and the discretization of the Navier–Stokes equations. Due to the presence of non-trivial sampling error, standard techniques for estimating discretization error (such as Richardson extrapolation) fail or are unreliable. This work provides a systematic and unified approach for estimating these errors. First, a sampling error estimator that accounts for correlation in the input data is developed. Then, this sampling error estimate is used as part of a Bayesian extension of Richardson extrapolation in order to characterize the discretization error. These methods are tested using the Lorenz equations and are shown to perform well. These techniques are then used to investigate the sampling and discretization errors in the DNS of a wall-bounded turbulent flow at Reτ ≈ 180. Both small (Lx/δ × Lz/δ = 4π × 2π) and large (Lx/δ × Lz/δ = 12π × 4π) domain sizes are investigated. For each case, a sequence of meshes was generated by first designing a “nominal” mesh using standard heuristics for wall-bounded simulations. These nominal meshes were then coarsened to generate a sequence of grid resolutions appropriate for the Bayesian Richardson extrapolation method. In addition, the small box case is computationally inexpensive enough to allow simulation on a finer mesh, enabling the results of the extrapolation to be validated in a weak sense. For both cases, it is found that while the sampling uncertainty is large enough to make the order of accuracy difficult to determine, the estimated discretization errors are quite small. This indicates that the commonly used heuristics provide adequate resolution for this class of problems. However, it is also found that, for some quantities, the discretization error is not small relative to sampling error, indicating that the conventional wisdom that sampling error dominates discretization error for this class of simulations needs to be reevaluated.

Oliver, Todd A.↗

Simulation scaling studies of reactor core two-phase flow using direct numerical simulation

Tremendous growth in supercomputing power in recent years has resulted in the emergence of high-resolution flow analysis methods as an advanced research tool to evaluate single and two-phase flow behavior. In particular, unstructured mesh-based methods have been applied to analyze flows in complex reactor core geometries, including those of light water reactors (LWR). The finite-element based code, PHASTA, is utilized to perform large-scale simulations of two-phase bubbly flows in LWR geometries. Given the large computational cost of direct numerical simulation (DNS) coupled with interface tracking methods (ITM), typical domains encompass a portion of a single subchannel. In the presented research, the state-of-the-art analysis of turbulent two-phase flows in complex LWR subchannel geometries are demonstrated at both prototypical reactor parameters as well as scaled low pressure conditions. Three different cases are studied, a high-pressure simulation in prototypical reactor subchannel geometry, a low-pressure case in prototypical geometry and a final low-pressure case in a geometry scaled up to conserve the ratio between the bubble size and the domain pitch. Utilizing advanced statistical processing tools, these simulation conditions are compared to shed light on the relevancy of two-phase flow characteristics given the significant differences between LWR and low-pressure conditions. These findings can lead to the generation of useful guiding principles when researchers need to scale the two-phase flow behavior captured at low pressure and temperature conditions to those at reactor operating conditions.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

A physics-based model for frost buildup under turbulent flow using direct numerical simulations

We present a new model for frost buildup under turbulent (and laminar) flow using direct numerical simulations. The physical model consists of two layers, the air and the frost. The air layer is fully resolved and consists of solving for the velocity, temperature, and vapor mass fraction fields. The frost layer thickness is resolved using conservation of mass and energy. Both phases are dynamically coupled using the immersed boundary method. Three-dimensional simulations are conducted in an open-channel configuration. A number of challenges need to be overcome to make these simulations feasible. First, to enforce far-field conditions of zero gradient and prescribed mean temperature and humidity, a source term is added to the energy and transport equations in the flow solver. Second, the mean frost thickness is subtracted after each time step to ensure a constant mean flow thickness and level of turbulence in the numerical domain. Third, a slow-time acceleration approach, which accelerates the frost buildup by a predetermined factor, is employed to bridge the gap between the fast turbulent and slow frost buildup time scales. Finally, a frost densification scheme is used to overcome the difficulties of vertically varying frost properties. The model is validated by comparing the frost thickness and frost thickness buildup rate over a period of one hour from a cooled flat plate experiment. As a result, both quantities compare favorably with experiments.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Direct numerical simulations of premixed and stratified flame propagation in turbulent channel flow

Here, direct numerical simulations are performed to investigate the transient upstream flame propagation (flashback) through homogeneous and fuel-stratified hydrogen-air mixtures transported in fully developed turbulent channel flows. Results indicate that, for both cases, the flame maintains steady propagation against the bulk flow direction, and the global flame shape and the local flame characteristics are both affected by the occurrence of fuel stratification. Globally, the mean flame shape undergoes an abrupt change when the approaching reactants transition from an homogeneous to a stratified mixing configuration. A V-shaped flame surface, whose leading-edge is located in the near-wall region, characterizes the nonstratified, homogeneous mixture case, while a U-shaped flame surface, whose leading edge propagates upstream at the channel centerline, distinguishes the case with fuel stratification (fuel-lean in the near-wall region and fuel-rich away from the wall). The characteristic thickness, wrinkling, and displacement speed of the turbulent flame brush are subject to considerable changes across the channel due to the dependence of the turbulence and mixture properties on the distance from the channel walls. More specifically, the flame transitions from a moderately wrinkled, thin-flamelet combustion regime in the homogeneous mixture case to a strongly wrinkled flame brush more representative of a thickened-flame combustion regime in the near-wall region of the fuel-stratified case. The combustion regime may be related to the Karlovitz number, and it is shown that a nominal channel-flow Karlovitz number, Ka ch in , based on the wall-normal variation of canonical turbulence ( t η =(ν/ε) 1/2 ) and chemistry ( t l = δ l / S l ) timescales in fully developed channel flow, compares well with an effective Karlovitz number, Ka ch fl , extracted from the present DNS datasets using conditionally sampled values of t η and t l in the immediate vicinity of the flame (0.1 < C < 0.3).

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Direct Numerical Simulation of the Turbulent Flow Through PWR Spacer Grid and Mixing Vanes

Direct numerical simulation (DNS) has been regarded as a reliable data source for the development and validation of turbulence models along with experiments. The realization of DNS usually involves a very fine mesh that should be able to resolve all relevant turbulence scales down to Kolmogorov scale. As the most computationally expensive approach compared to other CFD techniques, DNS applications used to be limited to flow studies at very low Reynolds numbers. Thanks to the tremendous growth of computing power over the past decades, the simulation capability of DNS has now started overlapping with some of the most challenging engineering problems. One of those examples in nuclear engineering is the turbulent coolant flow inside reactor cores. In Light Water Reactor (LWR) cores, the nuclear fuel rods are arranged together as rod bundles in a triangular or square pattern. The fuel rod bundles are supported by the spacer grids. The mixing vanes are also installed to promote the turbulence intensity in coolant flow. An understanding of spacer grid and mixing vanes effect is important because it has a direct impact on the heat removal efficiency from the fuel rod surface. In the presented work, the DNS of turbulent flows are performed in three different types of geometries: (a) a regular Pressurized Water Reactor (PWR) subchannel; (b) a special PWR subchannel with reduced size spacer grid and mixing vanes (SGMV); (c) a special PWR subchannel with reduced size SGMV, but with a longer domain size. The springs and dimples of the spacer grid are not represented for the simplicity in the present investigation. The mean flow velocity and turbulent kinetic energy profiles are averaged from the instantaneous DNS data in different types of geometries as well as various downstream locations with respect to SGMV region. The results will help better assess the influence of spacer grid and mixing vanes on core coolant flows.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Direct numerical simulation of Taylor-Couette flow subjected to a radial temperature gradient

Direct numerical simulations have been performed to study the Taylor-Couette (TC) flow between two rotating, coaxial cylinders in the presence of a radial temperature gradient. Specifically, the influence of the buoyant force and the outer cylinder rotation on the turbulent TC flow system with the radius ratio η = 0.912 was examined. For the co-rotating TC flows with Re{sub i} (inner cylinder) =1000 and Re{sub o} (outer cylinder) =100, a transition pathway to highly turbulent flows is realized by increasing σ, a parameter signifying the ratio of buoyant to inertial force. This nonlinear flow transition involves four intriguing states that emerge in sequence as chaotic wavy vortex flow for σ = 0, wavy interpenetrating spiral flows for σ = 0.02 and 0.05, intermittent turbulent spirals for σ = 0.1 and 0.2, and turbulent spirals for σ = 0.4. Overall, the fluid motion changes from a centrifugally driven flow regime characterized by large-scale wavy Taylor vortices (TVs) to a buoyancy-dominated flow regime characterized by small-scale turbulent vortices. Commensurate changes in turbulence statistics and heat transfer are seen as a result of the weakening of large-scale TV circulations and enhancement of turbulent motions. Additionally, the influence of variation of the outer cylinder rotation, −500 < Re{sub o} < 500 in presence of buoyancy (σ = 0.1) with Re{sub i} = 1000, has been considered. Specifically, it is demonstrated that this variation strongly influences the azimuthal and axial mean flows with a weaker influence on the fluctuating fluid motions. Of special interest, here are the turbulent dynamics near the outer wall where a marked decrease of turbulence intensity and a sign inversion of the Reynolds stress R{sub rz} are observed for the strongly counter-rotating regimes (Re{sub o} = − 300 and −500). To this end, it has been shown that the underlying flow physics for this drastic modification are associated with the modification of the correlation between the radial and axial fluctuating motions. In turn, the intriguing effects of this modification on the mean axial flow, turbulent statistics, force balance, and dynamic processes such as turbulence production and dissipation are discussed.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Direct numerical simulation and Reynolds-averaged Navier-Stokes modeling of the sudden viscous dissipation for multicomponent turbulence

Simulations of a turbulent multicomponent fluid mixture undergoing isotropic deformations are carried out to investigate the sudden viscous dissipation. This dissipative mechanism was originally demonstrated using simulations of an incompressible single-component fluid [S. Davidovits and N. J. Fisch, Phys. Rev. Lett. 116, 105004 (2016)]. By accounting for the convective and diffusive transfer of various species, the current work aims to increase the physical fidelity of previous simulations and their relevance to inertial confinement fusion applications. Direct numerical simulations of the compressed fluid show that the sudden viscous dissipation of turbulent kinetic energy is unchanged from the single-component scenario. More importantly, the simulations demonstrate that the mass fraction variance and covariance for the various species also exhibit a sudden viscous decay. Reynolds-averaged Navier-Stokes simulations were carried out using the $k - l$ model to assess its ability to reproduce the sudden viscous dissipation. Results show that the standard $k - l$ formulation does not capture the sudden decay of turbulent kinetic energy, mass-fraction variance, and mass-fraction covariance for simulations with various compression and expansion rates, or different exponents for the power-law model of viscosity. A new formulation of the $k - l$ model that is based on previous improvements to the $k - ε$ family of models is proposed, which leads to consistently good agreement with the direct numerical simulations for all the isotropic deformations under consideration.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Direct Numerical Simulation of Particle Behaviour in a Gas-Solid Three Dimensional Plane Jet

In this paper, direct numerical simulations (DNS) of a three-dimensional (3D), non-reacting, temporally evolving planar jet laden with mono-dispersed solid particles in the two-way coupling (TWC) regime are performed. Three different particles Stokes numbers (St = 0.1, 1, 10) have been considered. This has been achieved by varying the particle diameter while keeping the particle mass loading (fm = 1) and the jet Reynolds number (Rejet = 2000) unchanged. The objective is to study the effect of the particle Stokes number TWC regime on the temporal development of the planar jet. Two-way coupled momentum and heat transfer has been studied by investigating mean relative velocity and temperature. Results indicate that the relative parameters are more pronounced on the edges of the jet and decrease in time in general. At the center of the jet however, the mean value first increases and then decreases again. Additionally, lighter particles spread farther than heavier particles from the center of the jet. Furthermore, the heavier particles delay the development of the jet due to TWC effects.

97 MATHEMATICS AND COMPUTING↗

A petascale direct numerical simulation study of the modelling of flame wrinkling for large-eddy simulations in intense turbulence

A new set of petascale direct numerical simulations (DNS) modelling lean hydrogen combustion with detailed chemistry in a temporally evolving slot-jet configuration is presented as a database for the development and validation of models for premixed turbulent combustion. The jet Reynolds number is 10,000, requiring grid numbers up to nearly seven billion, which was achieved by computation on 120,000 processor cores. In contrast to many prior DNS studies, a mean shear exists that drives strong turbulent mixing within the flame structure. Three cases are simulated with different Damköhler numbers, while Reynolds number is held fixed. Basic statistics are presented showing that integrated burning rates up to approximately six times the laminar burning rate are obtained. It is shown that increased flame surface area accounts for most of the enhanced burning while increases in the burning rate per unit area also play an important contribution. The database is then used to assess a new model of flame wrinkling intended for large-eddy simulations (LES). The approach draws on concepts from fractal geometry, requiring the modelling of an inner cut-off scale representing the smallest scale of flame wrinkling, and the fractal dimension controlling the resolution dependence of the unresolved flame surface area. In contrast to previous modelling, it is argued that the inner cut-off should be filter-size invariant in an inertial range. Then, dimensional and physical reasoning together with Damköhler’s limiting scaling laws for the turbulent flame speed are used to infer the cut-off and fractal dimension in limiting regimes. Two methods of determining the fractal dimension are proposed: a static, algebraic expression or a dynamic approach exploiting a Germano-type identity. Finally the model is compared against the DNS in a priori tests and is found to give excellent results, quantitatively capturing the trends with time, space, filter size and Damköhler number.

Energy & Fuels↗

Direct numerical simulation of flame stabilization assisted by autoignition in a reheat gas turbine combustor

A three-dimensional direct numerical simulation (DNS) is performed for a turbulent hydrogen-air flame, represented with detailed chemistry, stabilized in a model gas-turbine combustor. The combustor geometry consists of a mixing duct followed by a sudden expansion and a combustion chamber, which represents a geometrically simplified version of Ansaldo Energia’s GT26/GT36 sequential combustor design. In this configuration, a very lean blend of hydrogen and vitiated air is prepared in the mixing duct and convected into the combustion chamber, where the residence time from the inlet of the mixing duct to the combustion chamber is designed to coincide with the ignition delay time of the mixture. The results show that when the flame is stabilized at its design position, combustion occurs due to both autoignition and flame propagation (deflagration) modes at different locations within the combustion chamber. A chemical explosive mode analysis (CEMA) reveals that most of the fuel is consumed due to autoignition in the bulk-flow along the centerline of the combustor, and lower amounts of fuel are consumed by flame propagation near the corners of the sudden expansion, where the unburnt temperature is reduced by the thermal wall boundary layers. An unstable operating condition is also identified, wherein periodic auto-ignition events occur within the mixing duct. These events appear upstream of the intended stabilization position, due to positive temperature fluctuations induced by pressure waves originating from within the combustion chamber. This DNS investigation represents the initial step of a comprehensive research effort aimed at gaining detailed physical insight into the rate-limiting processes that govern the sequential combustor behavior and avoid the insurgence of the off-design auto-ignition events.

20 FOSSIL-FUELED POWER PLANTS↗

Direct numerical simulation of hypersonic turbulent boundary layers: effect of spatial evolution and Reynolds number

Direct numerical simulations (DNS) are performed to investigate the spatial evolution of flat-plate zero-pressure-gradient turbulent boundary layers over long streamwise domains ( >300δ i , with δ i the inflow boundary-layer thickness) at three different Mach numbers, 2.5, 4.9 and 10.9, with the surface temperatures ranging from quasiadiabatic to highly cooled conditions. The settlement of turbulence statistics into a fully developed equilibrium state of the turbulent boundary layer has been carefully monitored, either based on the satisfaction of the von Kármán integral equation or by comparing runs with different inflow turbulence generation techniques. The generated DNS database is used to characterize the streamwise evolution of multiple important variables in the high-Mach-number, cold-wall regime, including the skin friction, the Reynolds analogy factor, the shape factor, the Reynolds stresses, and the fluctuating wall quantities. The data confirm the validity of many classic and newer compressibility transformations at moderately high Reynolds numbers (up to friction Reynolds number Re τ ≈1200 ) and show that, with proper scaling, the sizes of the near-wall streaks and superstructures are insensitive to the Mach number and wall cooling conditions. The strong wall cooling in the hypersonic cold-wall case is found to cause a significant increase in the size of the near-wall turbulence eddies (relative to the boundary-layer thickness), which leads to a reduced-scale separation between the large and small turbulence scales, and in turn to a lack of an outer peak in the spanwise spectra of the streamwise velocity in the logarithmic region.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Direct numerical simulation of supercritical oxy-methane mixing layers with CO 2 substituted counterparts

Direct numerical simulations (DNS) of temporally developing, three dimensional, CH 4 /CO 2 , CH 4 /O 2 and CO 2 /O 2 mixing layers, are conducted at a supercritical pressure of 300 atm. To effectively model the supercritical regime, the employed formulation includes the compressible form of the governing equations, the cubic Peng-Robinson equation of state and a generalized formulation for heat and mass flux vectors derived from non-equilibrium thermodynamics and fluctuation theory. A linear inviscid stability analysis is also performed for each case, to determine its most unstable wavelength. Flow visualizations reveal the presence of high density gradient magnitude regions for all three mixing layers, with conditional averages indicating increased presence of heavier fluid species within these regions. No significant departures are observed from perfect gas behavior, with compressibility factors very close to unity for all three mixing cases. Applicability of presumed probability density function methods (PDF) is examined for the three supercritical mixing layers. An a priori analysis is also conducted to investigate various simplifying assumptions employed in modeling various subgrid scale (SGS) flux models. Two additional terms are identified in the large eddy simulations (LES) equations, the gradient of SGS contribution of pressure in the momentum equation and the gradient of SGS contribution of heat flux in energy equation, whose magnitudes are similar and comparable with their respective resolved terms. The performance of the scale similarity model to represent these additional terms is investigated. Lastly, the performance of Smagorinsky, gradient and scale similarity models are also investigated.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Direct numerical simulation of temporally evolving luminous jet flames with detailed fuel and soot chemistry

Direct numerical simulations of 2D temporally-evolving luminous turbulent ethylene-air jet diffusion flames are performed using a high-order compressible Navier-Stokes solver. The simulations use a reduced mechanism derived from a detailed ethylene-air chemical kinetic mechanism that includes the reaction pathways for the formation of polycyclic aromatic hydrocarbons. The gas-phase chemistry is coupled with a detailed soot particle model based on the method of moments with interpolative closure that accounts for soot nucleation, coagulation, surface growth through HACA mechanism, and oxidation. Radiative heat transfer of CO{sub 2}, H{sub 2}O, and soot is treated by solving the radiative transfer equation using the discrete transfer method. This work presents preliminary results of radiation effects on soot dynamics at the tip of a jet diffusion flame with a particular focus on soot formation/oxidation.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Direct numerical simulation of transitional flow at high Mach number coupled with a thermal wall model

In transitional and turbulent high speed boundary-layer flows the wall thermal boundary conditions play an important role and in many cases an assumption of a constant temperature or a specified heat flux may not be appropriate for numerical simulations. In this paper we extend a formulation for direct numerical simulation of compressible flows to include a thin plate that is thermally fully coupled to the flow. Even without such thermal coupling compressible flows with shock waves and turbulence represent a challenge for numerical methods. In this paper we review the scaling properties of algorithms, based on explicit high-order finite differencing combined with shock capturing, that are suitable for dealing with such flows. An application is then considered in which an isolated roughness element is of sufficient height to trigger transition in the presence of acoustic forcing. With the thermal wall model included it is observed that the plate heats up sufficiently during the simulation for the transition process to be halted and the flow consequently re-laminarises.

Computer Science↗

Towards accelerating particle-resolved direct numerical simulation with neural operators

In this paper, we present our ongoing work aimed at accelerating a particle-resolved direct numerical simulation model designed to study aerosol–cloud–turbulence interactions. The dynamical model consists of two main components—a set of fluid dynamics equations for air velocity, temperature, and humidity, coupled with a set of equations for particle (i.e., cloud droplet) tracing. Rather than attempting to replace the original numerical solution method in its entirety with a machine learning (ML) method, we consider developing a hybrid approach. We exploit the potential of neural operator learning to yield fast and accurate surrogate models and, in this study, develop such surrogates for the velocity and vorticity fields. We discuss results from numerical experiments designed to assess the performance of ML architectures under consideration as well as their suitability for capturing the behavior of relevant dynamical systems.

54 ENVIRONMENTAL SCIENCES↗

Direct numerical simulation of single-species and binary-species boundary layers at high pressure

Direct numerical simulations of single-species and binary-species temporal boundary layers at high pressure are performed. The main objective is to investigate flow physics in a binary-species boundary layer at high pressure, with special attention to mass diffusion. The working fluids are nitrogen in the single-species cases, and a mixture of nitrogen and methane in the binary-species cases. An investigation of mean profiles shows that velocity and temperature profiles have steep gradients near the wall, whereas the mass fraction profiles do not have a steep gradient. This result indicates that the similarity law between velocity, temperature and mass fraction does not hold true in the binary-species boundary layer. The comparison of turbulent fluctuations shows that the qualitative characteristics of velocity and temperature are similar to each other. In contrast, profiles of mass fraction fluctuations are largely different from those of velocity and temperature. This result indicates that mass diffusion is not similar to momentum and thermal diffusions in binary-species boundary layers.

Toki, Takahiko↗

Direct Numerical Simulations of Autoignition in Stratified Dimethyl-ether (DME)/Air Turbulent Mixtures

In our paper, two- and three-dimensional direct numerical simulations (DNS) of autoignition phenomena in stratified dimethyl-ether (DME)/air turbulent mixtures are performed. A reduced DME oxidation mechanism, which was obtained using rigorous mathematical reduction and stiffness removal procedure from a detailed DME mechanism with 55 species, is used in the present DNS. The reduced DME mechanism consists of 30 chemical species. This study investigates the fundamental aspects of turbulence-mixing-autoignition interaction occurring in homogeneous charge compression ignition (HCCI) engine environments. A homogeneous isotropic turbulence spectrum is used to initialize the velocity field in the domain. Moreover, the computational configuration corresponds to a constant volume combustion vessel with inert mass source terms added to the governing equations to mimic the pressure rise due to piston motion, as present in practical engines. DME autoignition is found to be a complex three-staged process; each stage corresponds to a distinct chemical kinetic pathway. The distinct role of turbulence and reaction in generating scalar gradients and hence promoting molecular transport processes are investigated. Then, by applying numerical diagnostic techniques, the different heat release modes present in the igniting mixture are identified. In particular, the contribution of homogeneous autoignition, spontaneous ignition front propagation, and premixed deflagration towards the total heat release are quantified.

33 ADVANCED PROPULSION SYSTEMS↗

Direct numerical simulations for hybrid rocket boundary layers: Performance modeling and scaling

This paper presents a comprehensive performance and scaling analysis of direct numerical simulations for reacting boundary layers, focusing on slab burner configurations. Using a PETSc-based finite volume CFD framework, the study evaluates the scalability and computational cost of flow, chemistry, and radiation evaluations across 2D and 3D simulations. Polymethyl methacrylate (PMMA) is the fuel with pure O 2 as the oxidizer, modeled using a detailed chemical kinetics mechanism with 113 species and 660 reactions. A ray-tracing-based radiation solver, designed for distributed memory applications, is implemented to model radiation heat transfer. Parallel scalability is analyzed for the coupled flow, chemistry, and radiation heat transfer processes. Weak and strong scaling studies are conducted on up to 15,000 computational ranks, revealing robust performance when flow cells exceed 200 per rank. Chemistry evaluations dominate the computational cost in large 3D simulations, accounting for approximately 40% of the total runtime, while flow processes contribute around 35%, and radiation solver contributions remain below 10% due to reduced evaluation frequencies. GPU accelerated chemistry evaluation, implemented with Zero-RK, demonstrates significant promise, achieving up to a 4x speedup for workloads exceeding 30,000 cells per GPU. However, diminishing returns are observed for smaller workloads due to CPU-GPU communication overhead. This study identifies key challenges, including memory bottlenecks and the effects of domain partitioning on flow scalability, while highlighting the potential of GPU-accelerated chemistry to reduce computational costs. In conclusion, these findings provide realizable run configurations for 2D, 3D, and GPU-accelerated cases, offering insights for optimizing reactive flow solvers.

CFD Scalability↗