Search NASA⌕ Search

SEARCH · Search NASA

Results for “EFFECTIVE CHARGE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3

Negative space charge effects in photon-enhanced thermionic emission solar converters

In thermionic energy converters, electrons in the gap between electrodes form a negative space charge and inhibit the emission of additional electrons, causing a significant reduction in conversion efficiency. However, in Photon Enhanced Thermionic Emission (PETE) solar energy converters, electrons that are reflected by the electric field in the gap return to the cathode with energy above the conduction band minimum. These electrons first occupy the conduction band from which they can be reemitted. This form of electron recycling makes PETE converters less susceptible to negative space charge loss. While the negative space charge effect was studied extensively in thermionic converters, modeling its effect in PETE converters does not account for important issues such as this form of electron recycling, nor the cathode thermal energy balance. Here, we investigate the space charge effect in PETE solar converters accounting for electron recycling, with full coupling of the cathode and gap models, and addressing conservation of both electric and thermal energy. The analysis shows that the negative space charge loss is lower than previously reported, allowing somewhat larger gaps compared to previous predictions. For a converter with a specific gap, there is an optimal solar flux concentration. The optimal solar flux concentration, the cathode temperature, and the efficiency all increase with smaller gaps. For example, for a gap of 3 μm the maximum efficiency is 38% and the optimal flux concentration is 628, while for a gap of 5 μm the maximum efficiency is 31% and optimal flux concentration is 163.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Observation and simulation of space-charge effects in a radio-frequency photoinjector using a transverse multibeamlet distribution.

We report on an experimental study of space-charge effects in a radio-frequency (rf) photoinjector. A 5 MeV electron bunch, consisting of a number of beamlets separated transversely, was generated in an rf photocathode gun and propagated in the succeeding drift space. The collective interaction of these beamlets was studied for different experimental conditions. The experiment allowed the exploration of space-charge effects and its comparison with 3D particle-in-cell simulations. Our observations also suggest the possible use of a multibeam configuration to tailor the transverse distribution of an electron beam.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Influence of image charge effect on exciton fine structure in an organic-inorganic quantum well material

We have investigated experimentally excitonic properties in organic-inorganic hybrid multi quantum well crystals, (C{sub 4}H{sub 9}NH{sub 3}){sub 2}PbBr{sub 4} and (C{sub 6}H{sub 5}−C{sub 2}H{sub 4}NH{sub 3}){sub 2}PbBr{sub 4}, by measuring photoluminescence, reflectance, photoluminescence excitation spectra. In these materials, the excitonic binding energies are enhanced not only by quantum confinement effect (QCE) but also by image charge effect (ICE), since the dielectric constant of the barrier layers is much smaller than that of the well layers. By comparing the 1s-exciton and 2s-exciton energies, we have investigated the influence of ICE with regard to the difference of the Bohr radius.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Space Charge Effects on Ion Mobility Spectrometry

We study the space charge limited maximal current density j″ of mobility-selected ions that can be transmitted in ion mobility spectrometry (IMS). Theory and experiments focus on differential mobility analyzers (DMAs), but are readily generalizable to other IMS devices. Repulsion between the ions in the cloud leads to beam spreading, with significant broadening once the ion number density n becomes comparable to the space charge saturation limit n{sub sat} = ε{sub o}E{sub o}/(eΔ). Δ is the distance traversed by the ions in the direction of an externally imposed electric field E{sub o}, and e is the charge on each ion. For ions of electrical mobility Z, j″ is then limited below j″{sub sat} = ZE{sub o}en{sub sat} = Zε{sub o}E{sub o}{sup 2}/Δ. A theory including diffusion and space charge effects is developed that reduces to Burgers’ exactly solvable equation. The theory is tested in experiments with room temperature electrosprays (ES) of 100 mM [ethyl{sub 3}N{sup +}-formate{sup −}] in methanol. This spray produces primarily a single ionic species at very high initial concentration n, which may be tuned above or below n{sub sat} by varying the distance from the ES emitter to the inlet slit of the DMA. Mobility-selected ion densities n > 3.10{sup 8} ions/cm{sup 3} are achieved, with n~n{sub sat}, and with drastically broadened mobility peak shapes having the approximate top hat-predicted shapes. However, the largest n values approaching n{sub sat} are not quantitatively measurable because the densest sprays do not fill the outlet slit length. .

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Space Charge Effects in Low Energy Magnetized Electron Beams

Magnetized electron cooling of the ion beam is one of the major approaches towards obtaining the required high luminosity in the proposed Electron-Ion Collider (EIC). To increase the cooling efficiency, a bunched electron beam with a high bunch charge and high repetition rate is required. However, these features can combine to enhance the collective interactions, such as the space charge effect. A magnetized electron beam was successfully generated at the Thomas Jefferson National Accelerator Facility (JLab) using a compact, 300 kV DC high voltage photo-gun with an inverted insulator geometry and bi-alkali antimonide photocathode. The beam magnetization was characterized using a modest diagnostic beamline to measure beam sizes, rotation angles, and normalized transverse emittance as a function of magnetic field at the photocathode, laser spot size, and gun high-voltage. Simultaneously, simulations were performed using the A Space Charge Tracking Algorithm (ASTRA) and General Particle Tracer (GPT) programs. Further, sustained high average current magnetized beam up to 28 mA was demonstrated, and the photocathode lifetime for different magnetized electron beam currents was investigated. In the second part of the project, the space charge effect in low-energy magnetized electron beams was studied and compared with GPT simulations. The high bunch charge studies showed evidence of space charge current limitations starting at 0.3 nC and limited the maximum delivered bunch charge to 0.7 nC. To reach the high bunch charge goal of a few nC, the existing DC photo-gun design was modified using CST Studio Suite’s electromagnetic field solver, and a way to cancel the beam deflection exerted by the non-symmetric nature of the inverted insulator photo-gun geometry was discovered. This thesis presents a detailed description of the generation, characterization, and simulation of high current, high bunch charge magnetized electron beams at JLab, as well as the modified photo-gun design. Together with measurements and simulations, the purpose of this thesis is to provide a solid background on the theoretical aspects and the experimental challenges associated with magnetized electron beams for accelerator applications.

Wijethunga, W M Sajini↗

Long-term simulation of space-charge effects

The long-term macroparticle tracking simulation is computationally challenging but needed in order to study space-charge effects in high intensity circular accelerators. To address the challenge, in this paper, we proposed using a fully symplectic particle-in-cell model for the long-term space-charge simulation. We analyzed the artificial numerical emittance growth in the simulation and suggested using threshold numerical filtering in frequency domain to mitigate the emittance growth in the simulation. Furthermore, we also explored alternative frozen space-charge simulations and observed qualitative agreement with the self-consistent simulations.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Comparative study of the pressure dependence of optical-phonon transverse-effective charges and linewidths in wurtzite InN

In this work, we investigate the hydrostatic pressure dependence of the zone center optical phonons of c -plane and a -plane wurtzite InN epilayers grown on GaN substrates. The longitudinal to transverse mode splitting for the A 1 and E 1 modes was found to increase with increasing pressure, whereas the associated transverse effective charge decreases for both modes as e T * ( A 1 ) = 2.93 – 9.9 × 10 - 3 P and e T * ( E 1 ) = 2.80 – 10.6 × 10 - 3 P (in units of elementary charge and P in GPa). These observations are well in line with results for other II–VI, III–V, and group-IV semiconductor compounds as far as the relation between the magnitude and sign of the pressure derivative of e T * and the bond ionicity is concerned. As the latter increases so does | ∂ e T * / ∂ P | with a sign change from positive to negative for bond ionicities around f i = 0.46 for compounds with anions belonging to the first row of the Periodic Table. A comparison of the results for InN and other nine tetrahedrally bonded compounds indicate that the pressure behavior of the transverse effective charge is mainly determined by the strength of the Pauli repulsion between cation valence electrons and those of the anion core. We also perform ab initio calculations in order to address the origin of the observed increase in linewidth of the E 2 high mode which is found to arise from a pressure-induced increase in the rate of two-phonon decay processes. In conclusion, this broadening is associated with tuning into resonance of a steep edge in the two-phonon density of states around 460 cm - 1 with the frequency of the E 2 high mode.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Evaluating Born and Local Effective Charges in Nanoscale MnO

Phonons are exquisitely sensitive to finite-length scale effects in complex materials because they are intimately connected to charge, polarizability, and structure, and a quantitative analysis of their behavior can reveal microscopic aspects of chemical bonding. To investigate these effects in a model correlated oxide, we measured the infrared vibrational properties of 8-nm particles of MnO, compared the results with the analogous bulk material, and quantified the phonon confinement with a calculation of the Born effective charge. Our analysis reveals that the Born effective charge decreases by {approx}20%, compared to the bulk material. Moreover, this change impacts both ionicity and polarizability. Specifically, we find that MnO nanoparticles are {approx}12% less ionic than the corresponding bulk. This discovery is important for understanding finite-length scale effects in this simple binary oxide and the more complicated functional oxides that emanate from this parent compound.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Measurement of space charge effects and energy calibration in ProtoDUNE-SP

The single-phase liquid argon prototype at CERN (ProtoDUNE-SP) acts as a validation of the design for the DUNE single-phase far detector. With a total mass of 770 tons, it is the largest monolithic liquid argon single-phase time projection chamber in the world. ProtoDUNE-SP collected test-beam in autumn of 2018 and has been collecting cosmic and special calibration data since the end of 2018.The accumulation of positive ions in a LArTPC located on the surface can distort the electric field and the reconstructed particle trajectories. It is critical to understand and correct for the space charge effects in order to achieve the desired spatial and calorimetric resolutions in the LArTPC. This talk will present the measurement of space charge effects and the calorimetric measurements of the detector in ProtoDUNE-SP.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Surface-charging effect of capacitively coupled plasmas driven by combined dc/rf sources

The surface charging effect in hybrid dc/rf capacitively coupled plasmas is investigated by particle-in-cell/Monte Carlo simulations with an equivalent-circuit module. When the thickness of the dielectric is fixed, the self-bias dc voltage induced by the charge accumulated in the dielectric first increases and then decreases with increased dc voltage. The ratio of electron-to-ion charge flowing into the dielectric increases from -1.195 to -2.582. Increasing the dc voltage results in the number of high-energy ions bombarding the dielectric decreasing. The average electron energy at the dielectric decreases to the minimum value at the biggest self-bias dc voltage in the beginning and then rapidly increases. While fixing the dc source with thickening the dielectric, the self-bias dc voltage rises, but the charge ratio decreases. The average electron energy decreases monotonically and the ion-energy distributions (IEDs) at the dielectric are shifted toward the higher energy region. The results imply that the applied dc voltage may increase the electron flux and average energy to the dielectric at the cost of reduced etching rate, which may mitigate the notching effect. The applied dc voltage can also serve as a tool to modulate the ion IEDs. At the same time, a thicker dielectric will require higher applied dc voltage.

36 MATERIALS SCIENCE↗

Hydrogen Bonding Inside Anionic Polymeric Brush Layer: Machine Learning-Driven Exploration of the Relative Roles of the Polymer Steric Effect, Charging, and Type of Screening Counterions

This paper employs a combination of all-atom molecular dynamics (MD) simulations and unsupervised machine learning (ML) for studying the water-water hydrogen bonds (HBs) inside the anionic poly-acrylic acid (PAA) brushes modeled using all-atom MD simulations. PAA brush layer with different charge fraction (f), namely f=0, f=0.25, and f=1, is considered. Water-water interactions, both inside and outside the brush layer, are represented through distinct clusters of tupules of variables representing distances associated with the interacting water molecules. While clusters representing the HBs are present for water inside and outside the brushes, several clusters representing the long-range water-water interactions are missing for the water molecules inside the highly charged (f=1) PAA brushes. More importantly, inside highly charged brushes, the edge of the clusters representing the water-water HBs is progressively shortened, as compared to that in the bulk. Both these results stem from the presence of the PAA brushes imparting the steric effect and the charge effect, or the effect associated with enhanced interactions of water molecules with PE charges and counterions, thereby disrupting the water connectivity. This water-charged-species interaction also increases the water-water HB angle, i.e., makes the water-water HBs less stable inside the highly charged PAA brush layer. The narrowing of the clusters representing the HBs and the alteration of the angle characterizing the HBs confirm that the conditions defining the water-water HBs change inside the PAA brush layer as a function of the charges on the PAA brush layer. Furthermore, we show that the use of the generic definition of HBs, as compared to using our simulation-motivated modified definition of water-water HBs, overpredict the number of water-water HBs inside the PAA brush layer. Finally, we employ this all-atom-MD-ML framework to quantify the effect of other types of screening counterions (Li + , Ca 2+ , and Y 3+ ions) in determining the water-water interactions and water-water HB properties inside the PAA brush layer. Furthermore, the findings of the present study, confirming the weakening of water-water HBs inside the PAA brush layer, points to the possibility that the water molecules will be more available for hydrating the brush layer and counterions, thereby leading to a more pronounced wetting of the PAA brush layer.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Transverse space charge effect calculation in the Synergia accelerator modeling toolkit

This paper describes a transverse space charge effect calculation algorithm, developed in the context of accelerator modeling toolkit Synergia. The introduction to the space charge problem and the Synergia modeling toolkit short description are given. The developed algorithm is explained and the implementation is described in detail. As a result of this work a new space charge solver was developed and integrated into the Synergia toolkit. The solver showed correct results in comparison to existing Synergia solvers and delivered better performance in the regime where it is applicable.

43 PARTICLE ACCELERATORS↗

Vehicle charging effects during electron beam emission from the CHARGE-2 experiment

The CHARGE-2 sounding rocket payload has measured the transient and steady-state charging of a spacecraft in LEO during the emission of a low-power electron beam. The electron beam successfully escaped the emitting spacecraft above 240 km, rather than being degraded by the spacecraft's potentials. These potentials were limited to about half of the 1-kV beam accelerating potential at all latitudes, suggesting that the electron beam was able to escape at altitudes down to 160 km. Electrons created from beam-plasma interactions become increasingly important in the return current below 240 km, and increased with decreasing altitude.

Myers, Neil B.↗

Incorporating Beam Attenuation Calculations into an Integrated Data Analysis Model for Ion Effective Charge

Here, we have created a forward model for charge-exchange impurity density measurements that incorporates neutral beam attenuation measurements self-consistently for the purpose of determining the ion-effective charge Z eff . The model is constructed within an integrated data analysis framework to include a self-consistent calculation of neutral beam attenuation due to multiple impurity species into the measurement of a single impurity density. The model includes measurements of the beam Doppler-shift spectrum and shine-through particle flux to determine the neutral beam particle density which is attenuated by ion collisions. Synthetic data are generated from the diagnostic forward model using statistical and calibration uncertainties. These “noisy” data are used in the analysis to evaluate how accurately Z eff is determined. Methods of experimental design are employed to calculate the information gained from different diagnostic combinations. The analysis shows that while attenuation measurements alone do not provide a unique impurity density measurement in the case of a multispecies inhomogeneous plasma, they do provide an effective measurement of the Z eff profile and place constraints on the impurity density profiles.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Charging effect simulation model used in simulations of plasma etching of silicon

Understanding the consequences of local surface charging on the evolving etching profile is a critical challenge in high density plasma etching. Deflection of the positively charged ions in locally varying electric fields can cause profile defects such as notching, bowing, and microtrenching. We have developed a numerical simulation model capturing the influence of the charging effect over the entire course of the etching process. The model is fully integrated into ViPER (Virtual Plasma Etch Reactor)-a full featured plasma processing simulation software developed at Ilmenau University of Technology. As a consequence, we show that local surface charge concurrently evolves with the feature profile to affect the final shape of the etched feature. Using gas chopping (sometimes called time-multiplexed) etch process for experimental validation of the simulation, we show that the model provides excellent fits to the experimental data and both, bowing and notching effects are captured-as long as the evolving profile and surface charge are simultaneously simulated. In addition, this new model explains that surface scallops, characteristic of gas chopping technique, are eroded and often absent in the final feature profile due to surface charging. The model is general and can be applied across many etching chemistries.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗