Search NASA⌕ Search

SEARCH · Search NASA

Results for “EXPLOSIVE FORMING”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
NASA NTRS1990

Diamonds in detonation soot

Diamonds 4 to 7 nm in diameter have been identified and partially isolated from soot formed in detonations of carbon-forming composite explosives. The morphology of the soot has been examined by transmission electron microscopy (TEM), and the identity of the diamond has been established by the electron diffraction pattern of the TEM samples and by the X-ray diffraction (XRD) pattern of the isolated solid. Graphite is also present in the form of ribbons of turbostatic structure with a thickness of 2 to 4 nm. A fraction, about 25 percent of the soot by weight, was recovered from the crude soot after oxidation of the graphite with fuming perchloric acid. This fraction showed a distinct XRD pattern of diamond and the diffuse band of amorphous carbon. The IR spectrum of these diamonds closely matches that of diamonds recovered from meteorites (Lewis et al., 1987), perhaps indicating similar surface properties after the oxidation. If these diamonds are produced in the detonation itself or during the initial expansion, they exhibit a phenomenal crystal growth rate (5 nm/0.00001 s equal 1.8 m/hr) in a medium with a very low hydrogen/carbon ratio. Because the diamonds will be carried along with the expanding gases, they will be accelerated to velocities approaching 8 km/s.

Greiner, N. Roy↗
NASA NTRS2009

Impulsive Reconnection in the Sun's Atmosphere

Recent high-resolution observations from the Hinode mission show dramatically that the Sun's atmosphere is filled with explosive activity ranging from chromospheric explosions that reach heights of Mm, to coronal jets that can extend to solar radii, to giant coronal mass ejections (CME) that reach the edge of the heliosphere. The driver for all this activity is believed to be 3D magnetic reconnection. From the large variation observed in the temporal behavior of solar activity, it is clear that reconnection in the corona must take on a variety of distinct forms. The explosive nature of jets and CMEs requires that the reconnection be impulsive in that it stays off until a substantial store of free energy has been accumulated, but then turns on abruptly and stays on until much of this free energy is released. The key question, therefore, is what determines whether the reconnection is impulsive or not. We present some of the latest observations and numerical models of explosive and non-explosive solar activity. We argue that, in order for the reconnection to be impulsive, it must be driven by a quasi-ideal instability. We discuss the generality of our results for understanding 31) reconnection in other contexts.

Antiochos, Spiro K.↗
DOE OSTI2023

A history of mild shocks experienced by the regolith particles on hydrated asteroid Ryugu

Micrometeorites, a possible major source of Earth’s water, are thought to form from explosive dispersal of hydrated chondritic materials during impact events on their parental asteroids. However, this provenance and formation mechanism have yet to be directly confirmed using asteroid returned samples. Here, we report evidence of mild shock metamorphism in the surface particles of asteroid Ryugu based on electron microscopy. All particles are dominated by phyllosilicates but lack dehydration textures, which are indicative of shock-heating temperatures below ~500°C. Microfault-like textures associated with extensively shock-deformed framboidal magnetites and a high-pressure polymorph of Fe–Cr–sulfide have been identified. These findings indicate that the average peak pressure was ~2 GPa. The vast majority of ejecta formed during impact on Ryugu-like asteroids would be hydrated materials, larger than a millimetre, originating far from the impact point. These characteristics are inconsistent with current micrometeorite production models, and consequently, a new formation mechanism is required.

58 GEOSCIENCES↗
DOE OSTI2020

Thermo-hydrologic processes in maar eruptions: The role of vapor transport and condensation

Phreatomagmatic eruptions occur when magma interacts directly with water or slurries, commonly from groundwater in the shallow crust, resulting in rapid conversion of thermal energy to mechanical energy in a set of processes known as molten fuel-coolant interaction (MFCI). The efficiency of MFCI is controlled by properties of the magma and coolant, contact surface geometry, and system conditions, such as pressure and temperature; phreatomagmatic behavior can range from passive thermal granulation to violent thermohydraulic explosions (Zimanowski et al., 2015). Maar-diatreme eruptions, characterized by repetitive phreatomagmatic explosions, can form in a wide range of near-surface environments, from soft sediment substrate (e.g., Tecuitlapa, Mexico, Ort and Carrasco-Núñez, 2009; Hopi Buttes, AZ, Lefebvre et al., 2013) to hard, fractured country rock (e.g., West Eifel volcanic field, Germany and Massif Central, France, Lorenz, 2003). Country-rock structure, including faults and joints, rock type, and shallow crustal hydrologic properties, can influence an eruption’s behavior by controlling how much and at what rate water can be supplied to the magma (hydraulic flow rate), and determining the sediment: water ratio in the case of soft-sediment substrate eruptions. In a “soft” substrate environment, volcanic tremor can lead to liquefaction of saturated sediment, producing a slurry that may then interact with magma in unique ways (White, 1996; Auer, et al., 2006).

58 GEOSCIENCES↗
DOE OSTI2024

Data Science Enabled Enabled Discovery of Superconductors (Final Progress Report)

This Final Technical Report describes efforts by 4 PIs at the University of Florida (Peter Hirschfeld, Richard Hennig, Greg Stewart and James Hamlin), over the period September 2019-August 2023, to use data science and machine learning techniques to discover new conventional superconductors. The PIs constructed a discovery loop with two theorists and two experimentalists to: develop algorithms to machine learn descriptors correlating strongly with the critical temperature Tc (PI's Peter Hirschfeld, UF Physics and Richard Hennig, UF Materials Science and En), synthesize and measure properties of promising materials, and feed back the knowledge gained into the prediction algorithm. This work was motivated by the theoretical prediction and experimental discovery of high-pressure, high-pressure hydride superconductors, and to find ways to recreate the high critical temperatures in these systems at ambient pressure. Highlights from the grant include: 1) a new equation for Tc in terms of moments of the electron-phonon spectral function, improving on the so-called Allen-Dynes equation (1975); 2) study of the metastable A15 superconductor Nb3Si, formed under explosive compression at ~1000GPa to determine the kinetic barrier to the ground state structure; 3) the development of ultra-fast machine-learned atomic potentials for molecular dynamics, and 4) the discovery of superconductivity at 19K in WB2 arising from metastable defect structures in the crystal.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
NASA NTRS1977

Shatter cones formed in large-scale experimental explosion craters

In 1968, a series of 0.5-ton and 100-ton TNT explosion experiments were conducted in granitic rock near Cedar City, Utah, as part of a basic research program on cratering and shock wave propagation. Of special interest was the formation of an important type of shock metamorphic feature, shatter cones. A description is presented of the first reported occurrence of shatter cones in high explosion trials. A background to shatter cone studies is presented and attention is given to the test program, geology and physical properties of the test medium, the observed cratering, and the formational pressures for shatter cones. The high explosion trials conducted demonstrate beyond any doubt, that shatter cones can be formed by shock wave processes during cratering and that average formational pressures in these crystalline rocks are in the 20-60 kb range.

Roddy, D. J.↗
NASA NTRS1986

Barberton greenstone belt volcanism: Succession, style and petrogenesis

The Barberton Mountain Land is an early Archean greenstone belt along the eastern margin of the Kaapvaal Craton of southern Africa. Detailed mapping in the southern portion of the belt leads to the conclusion that a substantial thickness is due to original deposition of volcanics and sediments. In the area mapped, a minimum thickness of 12km of predominantly mafic and ultramafic volcanics comprise the Komati, Hooggenoeg, and Kromberg Formations of the Onverwacht Group, and at least one km of predominantly pyroclastic and epiclastic sediments derived from dacitic volcanics comprise the Fig Tree Group. The Barberton greenstone belt formed primarily by ultramafic to mafic volcanism on a shallow marine platform which underwent little or no concurrent extension. Vents for this igneous activity were probably of the non-constructional fissure type. Dacitic volcanism occurred throughout the sequence in minor amounts. Large, constructional vent complexes were formed, and explosive eruptions widely dispersed pyroclastic debris. Only in the final stages of evolution of the belt did significant thrust-faulting occur, generally after, though perhaps overlapping with, the final stage of dacitic igneous activity. A discussion follows.

Byerly, G. R.↗
NASA NTRS1987

Abundance and distribution of ultramafic microbreccia in Moses Rock Dike: Quantitative application of AIS data

Moses Rock dike is a Tertiary diatreme containing serpentinized ultramafic microbreccia (SUM). Field evidence indicates the SUM was emplaced first followed by breccias derived from the Permian strata exposed in the walls of the diatreme and finally by complex breccias containing basement and mantle derived rocks. SUM is found primarily dispersed throughout the matrix of the diatreme. Moses Rock dike was examined with Airborne Imaging Spectrometer (AIS) to map the distribution and excess of SUM in the matrix and to better understand the nature of the eruption which formed this explosive volcanic feature. AIS data was calibrated by dividing the suite of AIS data by data from an internal standard area and then multiplying this relative reflectance data by the absolute bidirectional reflectance of a selected sample from the standard area which was measured in the lab. From the calibrated AIS data the minerals serpentine, gypsum, and illite as well as desert varnish and the lithologies SUM and other sandstones were identified. SUM distribution and abundance in the matrix of the diatreme were examined in detail and two distinct styles of SUM dispersion were observed. The two styles are discussed in detail.

Mustard, John F.↗
NASA NTRS1993

Recondensation of chondritic material in the early solar system: Results of thermodynamic simulation

We have performed a thermodynamic simulation of the recondensation of evaporated meteoritic material. We suggest that evaporation and recondensation occurred in impact events during the intercollision of planetesimals during the early evolution of the solar system. The source materials adopted for our model are the chondrites CI Orgueil and H5 Richardton. These chondrites are representative examples of the two extremes regarding volatile content and oxidation state. We calculated equilibrium mineral compositions of the closed systems of the Orgueil's and Richardton's elemental composition at the P-T conditions characteristic of the explosion cloud formed at a planetesimal collision. The P-T conditions are as follows: 10(exp -4) bar, and 1500 and 2000 K. The results are presented.

Dorofeyeva, V. A.↗
NASA NTRS1995

Evaluation of Rhenium Joining Methods

Coupons of rhenium-to-Cl03 flat plate joints, formed by explosive and diffusion bonding, were evaluated in a series of shear tests. Shear testing was conducted on as-received, thermally-cycled (100 cycles, from 21 to 1100 C), and thermally-aged (3 and 6 hrs at 1100 C) joint coupons. Shear tests were also conducted on joint coupons with rhenium and/or Cl03 electron beam welded tabs to simulate the joint's incorporation into a structure. Ultimate shear strength was used as a figure of merit to assess the effects of the thermal treatment and the electron beam welding of tabs on the joint coupons. All of the coupons survived thermal testing intact and without any visible degradation. Two different lots of as-received, explosively-bonded joint coupons had ultimate shear strengths of 281 and 310 MPa and 162 and 223 MPa, respectively. As-received, diffusion-bonded coupons had ultimate shear strengths of 199 and 348 MPa. For the most part, the thermally-treated and rhenium weld tab coupons had shear strengths slightly reduced or within the range of the as-received values. Coupons with Cl03 weld tabs experienced a significant reduction in shear strength. The degradation of strength appeared to be the result of a poor heat sink provided during the electron beam welding. The Cl03 base material could not dissipate heat as effectively as rhenium, leading to the formation of a brittle rhenium-niobium intermetallic.

Reed, Brian D.↗
NASA NTRS1997

Shoemaker-Levy 9 and Plume-Forming Collisions on Earth

Computational models for the July, 1994 collision of comet Shoemaker Levy 9 with Jupiter have provided a framework for interpreting the observational data. Imaging, photometry, and spectroscopy data from ground-based, Hubble Space Telescope, and Galileo spacecraft instruments are consistent with phenomena that were dominated by the generation of incandescent fireballs that were ballistically ejected to high altitudes, where they formed plumes that subsequently collapsed over large areas of Jupiter's atmosphere. Applications of similar computational models to collisions into Earth's atmosphere show that a very similar sequence of events should take place for NEO impacts with energies as low as 3 megatons, recurring on 100 year timescales or less. This result suggests that the 1908 Tunguska event was a plume-forming atmospheric explosion, and that some of the phenomena associated with it might be related to the ejection and collapse of a high plume. Hazards associated with plume growth and collapse should be included in the evaluation of the impact threat to Earth, and opportunities should be sought for observational validation of atmospheric impact models by exploiting data already being collected from the natural flux of multikiloton to megaton sized objects that constantly enter Earth's atmosphere on annual to decadal timescales.

Boslough, Mark B. E.↗
DOE OSTI2022

Bi-metallic anode for amplitude modulated magnetron

An anode structure for a magnetron provides for low eddy currents and efficient water cooling. The anode structure may be made by machining a bimetal blank including an out layer of a first metal and an inner layer of a second metal and formed by explosion bonding. The second metal has a resistivity lower than first metal and a thermal conductivity higher than the first metal. The machining may result in the anode structure with vanes each having a center (tip) portion made of the second metal and the rest made of the first metal. The machined anode structure may be coated with the second metal.

Neubauer, Michael L.↗