Search NASA⌕ Search

SEARCH · Search NASA

Results for “Effect of layer thickness”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
NASA NTRS1979

An evaluation of four single element airfoil analytic methods

A comparison of four computer codes for the analysis of two-dimensional single element airfoil sections is presented for three classes of section geometries. Two of the computer codes utilize vortex singularities methods to obtain the potential flow solution. The other two codes solve the full inviscid potential flow equation using finite differencing techniques, allowing results to be obtained for transonic flow about an airfoil including weak shocks. Each program incorporates boundary layer routines for computing the boundary layer displacement thickness and boundary layer effects on aerodynamic coefficients. Computational results are given for a symmetrical section represented by an NACA 0012 profile, a conventional section illustrated by an NACA 65A413 profile, and a supercritical type section for general aviation applications typified by a NASA LS(1)-0413 section. The four codes are compared and contrasted in the areas of method of approach, range of applicability, agreement among each other and with experiment, individual advantages and disadvantages, computer run times and memory requirements, and operational idiosyncrasies.

Freuler, R. J.↗
NASA NTRS1989

Large eddy simulation of the flow in a transpired channel

The flow in a transpired channel has been computed by large eddy simulation. The numerical results compare very well with experimental data. Blowing decreases the wall shear stress and enhances turbulent fluctuations, while suction has the opposite effect. The wall layer thickness normalized by the local wall shear velocity and kinematic viscosity increases on the blowing side of the channel and decreases on the suction side. Suction causes more rapid decay of the spectra, larger mean streak spacing and higher two-point correlations. On the blowing side, the wall layer structures lie at a steeper angle to the wall, whereas on the suction side this angle is shallower.

Piomelli, Ugo↗
NASA NTRS1991

Numerical simulation of transverse fuel injection

A review of recent work at NASA Langley Research Center to compare the predictions of transverse fuel injector flow fields and mixing performance with experimental results is presented. Various cold (non-reactive) mixing studies were selected for code calibration which include the effects of boundary layer thickness and injection angle for sonic hydrogen injection into supersonic air. Angled injection of helium is also included. This study was performed using both the three-dimensional elliptic and the parabolized Navier-Stokes (PNS) versions of SPARK. Axial solution planes were passed from PNS to elliptic and elliptic to PNS in order to efficiently generate solutions. The PNS version is used both upstream and far downstream of the injector where the flow can be considered parabolic in nature. The comparisons are used to identify experimental deficiencies and computational procedures to improve agreement.

Mao, Marlon↗
NASA NTRS1989

Updated users' guide for TAWFIVE with multigrid

A program for the Transonic Analysis of a Wing and Fuselage with Interacted Viscous Effects (TAWFIVE) was improved by the incorporation of multigrid and a method to specify lift coefficient rather than angle-of-attack. A finite volume full potential multigrid method is used to model the outer inviscid flow field. First order viscous effects are modeled by a 3-D integral boundary layer method. Both turbulent and laminar boundary layers are treated. Wake thickness effects are modeled using a 2-D strip method. A brief discussion of the engineering aspects of the program is given. The input, output, and use of the program are covered in detail. Sample results are given showing the effects of boundary layer corrections and the capability of the lift specification method.

Melson, N. Duane↗
NASA NTRS1976

Effect of grazing flow on steady-state resistance of isolated square-edged orifices

Steady state diagnostic testing of an isolated orifice has shown the nature of the interaction between grazing and orifice flow causing the large increase in orifice resistance for both inflow and outflow. A simple inviscid interaction model is developed which uses thin aerofoil theory to account for pressure forces exerted at the interface between the orifice and grazing flow together with a one-dimensional discharge coefficient concept. The effect of grazing flow boundary layer thickness is also included in the model. Resistance measurements for each orifice tested, over a wide range of grazing flow speeds and flow rates, collapse into a single curve when plotted in terms of effective discharge coefficient against orifice to grazing velocity ratio. The correlation curves for inflow and outflow are different. Data for clustered orifices collapse in the same way as those for the single orifice. The effect of boundary layer thickness is compared with model predictions.

Rogers, T.↗
NASA NTRS1989

Reflection/suppression coatings for 900 - 1200 A radiation

The design and performance of multiple-layer, selective-reflection, selective-suppression coatings for the 900 - 1200 A band are described. These coatings are designed to optimize both high reflectivity at a desirable wavelength and low reflectivity at an undesirable wavelength. The minimum structure for a selective coating consists of a thin metal or metal oxide layer (50 - 150 A thickness) over an aluminum substrate protected with a semi-transparent dielectric (100 - 1000 A thickness). Predicted coating performance is strongly effected by varying the layer combination and thickness. A graphical method of optimizing the coating layer structure is developed. Aluminum, silicon, their oxides, and gold have been investigated as coating layer materials. A very simple coating with a 1026 to 1216 A reflectivity ratio greater than 100 was fabricated. Such reflection/suppression coatings may be of great utility to spaceborne EUV spectrographs.

Edelstein, Jerry↗
NASA NTRS1979

Influence of corrugation-roughness shape on aerodynamic heating in thick turbulent boundary layers

The results of an experimental program to evaluate the effects of wave shape on heat transfer and pressure distributions of corrugation roughened flat plates in thick turbulent boundary layers are presented. The wave shaping effects studied were wavelength, wave amplitude, and wave radius. The experimental program consisted of tests in the sidewall boundary layer of the Langley Continuous Flow Hypersonic Tunnel at a Mach number of 10.3 and Reynolds numbers from 1.3 to 8.2 x 10 to the 6th per meter. The effects of wave shape are analyzed, correlated and compared with previous data obtained in both thick and thin boundary layers. The correlations include the effects of a large range of geometric, inviscid flow, internal boundary layer, and bulk boundary layer parameters in supersonic and hypersonic flow.

Brandon, H. J.↗
NASA NTRS1997

Effect of Pressure Gradients on Plate Response and Radiation in a Supersonic Turbulent Boundary Layer

Using the model developed by the author for zero-pressure gradient turbulent boundary layers, results are obtained for adverse and favorable pressure gradients. It is shown that when a flexible plate is located in an adverse pressure gradient area, it vibrates more than if it were in a favorable pressure gradient one. Therefore the noise generated by the plate in an adverse pressure gradient is much greater than that due to the plate in a favorable pressure gradient. The effects of Reynolds number and boundary layer thickness are also analyzed and found to have the same effect in both adverse and favorable pressure gradient cases. Increasing the Reynolds number is found to increase the loading on the plate and therefore acoustic radiation. An increase in boundary layer thickness is found to decrease the level of the high frequencies and therefore the response and radiation at these frequencies. The results are in good qualitative agreement with experimental measurements.

Frendi, Abdelkader↗
NASA NTRS2024

BOLT-2 Roughness Side Flight Data Results and Analysis

This report provides an in-depth review of the flight data obtained from Side B, also known as the roughness side, of BOLT-2, which was developed and designed to measure the effectiveness of boundary layer trips at hypersonic conditions. Three discrete-roughness trips were implemented on Side B at specific locations, with the necessary sensor layout, to investigate the flight conditions at which they no longer maintained turbulence behind them. All three trips were the same type that were scaled and sized based on predictions of local boundary layer thicknesses to provide the same level of effectiveness. One trip was on the vehicle centerline, where the boundary layer is relatively thick, while the other two were symmetrically located outboard where the boundary layer is much thinner. The relative difference in boundary layer thickness between these locations was roughly on the order of 3-to-1, thus the centerline trip was geometrically about three times larger than the outboard trips. A first order assessment of the Side B flight results is indicated by these three trips forcing transition onset at the same time during flight. The enclosed flight data shows that the performance of each individual trip was nearly identical, with allowances for minor variations attributed to measurement accuracy.

Flight Data↗
NASA NTRS2020

Applying Orbital Multi-Angle Photopolarimetric Observations to Study Properties of Aerosols in the Earth's Atmosphere: Implications of Measurements in the 1.378 µm Spectral Channel to Retrieve Microphysical Characteristics and Composition of Stratospheric Aerosols

We analyze the possibilities of orbital photopolarimetric measurements to study properties of aerosols in the Earth's atmosphere. As an example, we consider the case when such measurements are performed within a narrow spectral channel centered at 1.378 µm that allows to retrieve microphysical characteristics of stratospheric aerosols separately from those of tropospheric aerosols. We consider the case of stratospheric aerosols caused by volcanic eruption, and adopt the model of the stratosphere in the form of a homogeneous plane-parallel layer composed of polydisperse spherical particles. We use numerically exact solutions of the vector radiative transfer equation to theoretically simulate measurements carried out at various numbers of scattering angles, including: (i) radiance measurements alone; (ii) polarization measurements alone; and (iii) radiance and polarization measurements together. The results of computations show that the simultaneous use of radiance and polarization measurements at a sufficiently large number of scattering angles enables one to retrieve the optical thickness, effective radius, and refractive index of aerosols with adequate accuracy. We demonstrate how the accuracy of the derived values of the optical parameters of aerosols depends on the accuracy of measurements of the intensity and polarization of the reflected light, optical thickness of aerosol layer itself, effective radius of aerosols, width of the particle size distribution, and number of viewing angles.

Aerosols↗
NASA NTRS1987

Shock structure in jets of arbitrary exit geometry

The shock structure and hydrodynamic stability of single and twin jets with arbitrary exit geometry are studied. Both vortex sheets and realistic mean profiles are considered for the jet shear layer. The boundary element method is used to predict the shock spacing and screech tones in a vortex sheet model of a single jet. Results are given for circular, elliptic and rectangular jets and the results compared with analysis and experiment. A finite difference technique is used to examine the effect of finite mixing layer thickness for a single jet. The hydrodynamic stability of twin circular jets is also considered. The variation of the stability characteristics are presented for the vortex sheet case for several separation distances. The formulation of the problem to account for finite thickness effects is also given.

Morris, P. J.↗
NASA NTRS1995

Numerical simulations of the flow in the HYPULSE expansion tube

Axisymmetric numerical simulations with finite-rate chemistry are presented for two operating conditions in the HYPULSE expansion tube. The operating gas for these two cases is nitrogen and the computations are compared to experimental data. One test condition is at a total enthalpy of 15.2 MJ/Kg and a relatively low static pressure of 2 kPa. This case is characterized by a laminar boundary layer and significant chemical nonequilibrium in the acceleration gas. The second test condition is at a total enthalpy of 10.2 MJ/Kg and a static pressure of 38 kPa and is characterized by a turbulent boundary layer. For both cases, the time-varying test gas pressure predicted by the simulations is in good agreement with experimental data. The computations are also found to be in good agreement with Mirels' correlations for shock tube flow. It is shown that the nonuniformity of the test gas observed in the HYPULSE expansion tube is strongly linked to the boundary layer thickness. The turbulent flow investigated has a larger boundary layer and greater test gas nonuniformity. In order to investigate possibilities of improving expansion tube flow quality by reducing the boundary layer thickness, parametric studies showing the effect of density and turbulent transition point on the test conditions are also presented. Although an increase in the expansion tube operating pressure level would reduce the boundary layer thickness, the simulations indicate that the reduction would be less than what is predicted by flat plate boundary layer correlations.

Wilson, Gregory J.↗
NASA NTRS1980

On optical imaging through aircraft turbulent boundary layers

Optical resolution quality as affected by aircraft turbulent boundary layers is analyzed. Wind-tunnel data was analyzed to obtained the variation of boundary layer turbulence scale length and mass density rms fluctuations with Mach number. The data gave good agreement with a mass density fluctuation turbulence spectrum that is either isotropic of orthogonally anisotropic. The data did not match an isotropic turbulence velocity spectrum which causes an anisotropic non-orthogonal mass density fluctuation spectrum. The results indicate that the average mass density rms fluctuation is about 10% of the maximum mass density across the boundary layer and that the transverse turbulence scale size is about 10% of the boundary layer thickness. The results indicate that the effect of the turbulent boundary layer is large angle scattering which decreases contrast but not resolution. Using extinction as a criteria the range of acceptable aircraft operating conditions are given.

Sutton, G. W.↗
NASA NTRS1982

Effects of Reynolds number on orifice induced pressure error

Data previously reported for orifice induced pressure errors are extended to the case of higher Reynolds number flows, and a remedy is presented in the form of a porous metal plug for the orifice. Test orifices with apertures 0.330, 0.660, and 1.321 cm in diam. were fabricated on a flat plate for trials in the NASA Langley wind tunnel at Mach numbers 0.40-0.72. A boundary layer survey rake was also mounted on the flat plate to allow measurement of the total boundary layer pressures at the orifices. At the high Reynolds number flows studied, the orifice induced pressure error was found to be a function of the ratio of the orifice diameter to the boundary layer thickness. The error was effectively eliminated by the insertion of a porous metal disc set flush with the orifice outside surface.

Plentovich, E. B.↗
NASA NTRS1990

Determination of the optical thickness and effective particle radius of clouds from reflected solar radiation measurements. I - Theory

A method is presented for determining the optical thickness and effective particle radius of stratiform cloud layers from reflected solar radiation measurements. A detailed study is presented which shows that the cloud optical thickness (tau c) and effective particle radius (r/e/) of water clouds can be determined solely from reflection function measurements at 0.75 micron and 2.16 microns, provided tau c is not less than 4 and r(e) is not less than 6 microns. For optically thin clouds, the retrieval becomes ambiguous, resulting in two possible solutions for the effective radius and optical thickness. Adding a third channel near 1.65 micron does not improve the situation noticeably, whereas the addition of a channel near 3.70 microns reduces the ambiguity in deriving the effective radius. The effective radius determined by the above procedure corresponds to the droplet radius at some optical depth within the cloud layer.

Nakajima, Teruyuki↗
NASA NTRS1974

Radiation-gas dynamic shock layer coupling

The present work considers theoretically the problem of radiation losses on the shock layer during hypersonic flight, and in particular, results are presented for the stagnation line shock layer for a wide variety of flight conditions, providing a new overview of radiation-gas dynamic coupling within a shock layer. The present results are based on a previous model (Engel, Farmer, et al., 1973) of a viscous radiating shock layer. An important result is that the radiation-gas dynamic coupling effect on the radiative heating can be related to a single parameter, namely, the radiative cooling parameter, whereas the effect on the shock layer thickness is not a simple function of this parameter.

Engel, C. D.↗
NASA NTRS1977

Swept wing aerodynamics

Technique analyzes viscosity-dependent aerodynamic characteristics of multielement infinite swept wings in incompressible flow. Use of source distributions rather than displacement thickness to represent boundary layer effect on potential flow and of iterative technique for matrix inversion reduces computer time for overall analysis.

Dvorak, F. A.↗