Search NASA⌕ Search

SEARCH · Search NASA

Results for “Effects”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Size Effect of Negative Capacitance State and Subthreshold Swing in Van der Waals Ferrielectric Field–Effect Transistors

Analytical calculations corroborated by the finite element modeling show that thin films of Van der Waals ferrielectrics covered by a 2D-semiconductor are promising candidates for the controllable reduction of the dielectric layer capacitance due to the negative capacitance (NC) effect emerging in the thin films. The NC state is conditioned by energy-degenerated poly-domain states of the ferrielectric polarization induced in the films under incomplete screening conditions in the presence of a dielectric layer. Calculations performed for the FET-type heterostructure “ferrielectric CuInP 2 S 6 film—2D-MoS 2 single-layer—SiO 2 dielectric layer” reveal the pronounced size effect of the multilayer capacitance. Derived analytical expressions for the electric polarization and multilayer capacitance allow to predict the thickness range of the dielectric layer and ferrielectric film for which the NC effect is the most pronounced in various Van der Waals ferrielectrics, and the corresponding subthreshold swing becomes much less than the Boltzmann's limit. Obtained results can be useful for the size and temperature control of the NC effect in the steep-slope ferrielectric FETs.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Effects of knock intensity measurement technique and fuel chemical composition on the research octane number (RON) of FACE gasolines: Part 2 – Effects of spark timing

The Research and Motor Octane Number (RON, MON) characterize a fuel’s knock resistance by rating the knock intensity of a sample fuel relative to that of Primary Reference Fuels (PRF) in a Cooperative Fuel Research (CFR) Engine. A fuel’s octane number is regulated to prevent damage from autoignition leading to knocking combustion in spark-ignition engines. The operational differences between the standard RON rating and modern engine operation are explored in a three-part publication series. The previous study focused on the effects of lambda and knock characterization. This second study primarily focuses on the effects of spark timing on RON determination. Following the findings from the first publication, the knock intensity was captured by the knockmeter and by the maximum amplitude of pressure oscillations (MAPO) at the lambda of peak knock intensity and stoichiometry. Knock-limited spark advance tests were conducted for a set of seven Fuels for Advanced Combustion Engines (FACE) from the Coordinating Research Council (CRC) with varying chemical composition, PRFs, and Toluene Standardization Fuels (TSFs). For retarded spark timings, pre-spark low-temperature heat release was found for low RON PRFs. Low RON PRFs also showed knocking characteristics before reaching the center of combustion suggesting that the use of knock-limited spark advance (KLSA) was preferred over the knock-limited combustion phasing. Primarily paraffinic fuels tended towards increased pressure oscillations while dominantly aromatic fuels experienced higher pressure rise rates. A MAPO-based KLSA correlated best to Octane Index at a negative K-factor suggesting beyond RON operation despite being at otherwise RON conditions. At stoichiometry, the MAPO-based KLSA did neither correlate to RON nor Octane Index. Finally, good agreement was found between KLSA-based effective RON from this study to the MAPO-based effective RON from the first study.

10 SYNTHETIC FUELS↗
DOE OSTI2022

Effects of Exercise During Radiation Therapy on Physical Function and Treatment-Related Side Effects in Men With Prostate Cancer: A Systematic Review and Meta-Analysis

Radiation therapy is a commonly used treatment for prostate cancer; however, the side effects may negatively affect quality of life and cause patients to be less physically active. Although exercise has been shown to mitigate radiation therapy–related fatigue in men with prostate cancer during radiation therapy, other adverse effects of treatment such as physical deconditioning, urinary symptoms, or sexual dysfunction have not been systematically reviewed in this patient population. Thus, the purpose of this review was to investigate the effect of exercise on physical function and treatment-related side effects in men with prostate cancer undergoing radiation therapy.

62 RADIOLOGY AND NUCLEAR MEDICINE↗
DOE OSTI2025

Coexistence of unconventional spin Hall effect and antisymmetric planar Hall effect in IrO 2

Crystal symmetry plays an important role in the Hall effects. Unconventional spin Hall effect (USHE), characterized by Dresselhaus and out-of-plane spins, has been observed in materials with low crystal symmetry. Recently, antisymmetric planar Hall effect (APHE) was discovered in rutile RuO 2 and IrO 2 (101) thin films, which also exhibit low crystal symmetry. In this study, we report the observation of both USHE and APHE in IrO 2 (111) films, using spin-torque ferromagnetic resonance and harmonic Hall measurements, respectively. Notably, the unconventional spin-torque efficiency from Dresselhaus spin was more than double that of a previous report. Additionally, the temperature dependence of APHE suggests that it arises from the Lorentz force, constrained by crystal symmetry. Here, symmetry analysis supports the coexistence of USHE and APHE and demonstrates that both originate from the crystal symmetry of IrO 2 (111), paving the way for a deeper understanding of Hall effects and related physical phenomena.

Crystal structure↗
DOE OSTI2021

Effects of Radiation-Induced Defects on Corrosion

The next generation of nuclear reactors will expose materials to conditions that, in some cases, are even more extreme than those in current fission reactors, inevitably leading to new materials science challenges. Radiation-induced damage and corrosion are two key phenomena that must be understood both independently and synergistically, but their interactions are often convoluted. In the light water reactor community, a tremendous amount of work has been done to illuminate irradiation-corrosion effects, and similar efforts are under way for heavy liquid metal and molten salt environments. While certain effects, such as radiolysis and irradiation-assisted stress corrosion cracking, are reasonably well established, the basic science of how irradiation-induced defects in the base material and the corrosion layer influence the corrosion process still presents many unanswered questions. In this review, we summarize the work that has been done to understand these coupled extremes, highlight the complex nature of this problem, and identify key knowledge gaps.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Evaluating Probability of Containment Effectiveness at a GCS Sites using integrated assessment modeling approach with Bayesian decision Networks

Improved scientific and engineering understanding of the behavior of geologic CO2 storage together with established regulatory framework and incentive structures raise the prospects for accelerated, large-scale deployment of this greenhouse gas emissions reduction approach. Incentive structures call for the establishment of appropriate verification and accounting approaches to support claims of the integrity of a geologic storage complex and to justify taking credit for long-term storage. In this study, we present a framework for assessing the probability of containment effectiveness over the lifetime of a geologic carbon storage site (e.g., after 70 years of injection and post-injection site performance) using forward stochastic model realizations based on site characterization data and using a monitoring-informed Bayesian network based on hypothetical detectability from surface seismic surveys over the site injection and post-injection phases. The National Risk Assessment Partnership’s open-source Integrated Assessment Model (NRAP-Open-IAM) was utilized to develop an ensemble of 10,000 a priori stochastic forecasts of CO2 containment. Those simulations were used to train the Bayesian network model to estimate the prior probabilities of the CO2 leakage mass into overlying, monitorable aquifers considering the uncertainties in the reservoir properties, permeability of potentially leaky wells and the overlying aquifers. The conditional probabilities in the Bayesian network were either learned from the NRAP-Open-IAM simulations or derived from the predefined detection thresholds for the monitoring method. Observations obtained from monitoring, over time during the site operation phases were then used to generate updated posterior probabilities of containment (and any loss from containment) in the Bayesian network by propagating the prior probabilities through the conditional probabilities. We demonstrate how to construct and use the Bayesian network for verifying the long-term storage complex effectiveness informed by monitoring based on the NRAP-Open-IAM simulations previously developed for the FutureGen 2.0 site. This approach may have relevance for stake holders to demonstrate secure geologic storage, provide a defensible, probabilistic approach to claim credit for geologic storage, and to estimate the likelihood that any fraction of the claimed credit may need to be refunded to the creditor based on available monitoring information.

Bayesian network, Risk assessment, Monitoring, car↗
DOE OSTI2021

Engineering integration in elementary science classrooms: Effects of disciplinary language scaffolds on English learners' content learning and engineering identity

Abstract Background Limited research examines the effects of integrated science and engineering (SE) instruction emphasizing disciplinary literacy and language activities on engineering identity and content understanding. Far fewer studies target English learners (ELs). Purpose The impact of an SE intervention on the development of science, engineering, and technology knowledge as well as engineering identity was examined. To address ELs' learning needs, the curricular design was built on a validated SE model by integrating (1) developmental, (2) language scaffolds, and (3) culturally based accommodations. Design/Method Separate analysis of variance examined the effects of the intervention on science, engineering, and technology knowledge as well as engineering identity. The relationship among engineering identity and content outcomes was also examined. ELs from kindergarten to second grade classrooms were randomly assigned to the integrated SE group or control group. Results Integrated SE instruction significantly increased ELs' science, engineering, and technology knowledge as well as a substantially developed engineering identity. Overall, ELs' engineering identity is associated with an increase in science, engineering, and technology content knowledge. However, second grade girls' identity development was not associated with learning measures. These correlations suggest the context of the engineering activity may have reinforced gendered stereotypes and reduced the effects for girls' engineering attitudes. Conclusions Integrated SE instruction emphasizing disciplinary literacy and cultural accommodations increases early elementary ELs' learning and engineering identity. Future studies should examine the unique effects of language scaffolds and cultural modifications on student learning and the impact of gender stereotypes on girls' engineering attitudes.

Aguirre‐Muñoz, Zenaida↗
DOE OSTI2022

Effect of ash in paper sludge on enzymatic hydrolysis

The valorization of paper sludge is a high-potential process to develop renewable fuels and chemicals, which can be integrated with pulp and paper mills. Calcium carbonate is the main ash component in sludge, which plays a role in buffering pH and potentially lowering the conversion during enzymatic hydrolysis. Therefore, it is important to investigate the effect of ash on sugar yields and examine pH change to introduce efficient and economical enzymatic hydrolysis of sludge. Carbohydrate conversion was enhanced when the ash was removed by fractionation. On the other hand, the highest sugar recovery was obtained when the sludge contained 20% ash content. The pH change during enzymatic hydrolysis was influenced by ash and explained why sludge-derived hydrolysate showed lower carbohydrate conversion. Therefore, a high shear process with the increased acid amount is suggested to prohibit the negative effect of ash and enhance the accessibility of cellulase to fibers. Finally, this study highlights the feasibility of using wet waste streams generated by the paper industry.

09 BIOMASS FUELS↗
DOE OSTI2024

Mesoscale Modeling of the Effects of Accelerated Burnup on UO2 Microstructural Evolution

Accelerating the nuclear fuel qualification process will rely on some combination of advanced modeling and simulation techniques with accelerated irradiation testing and separate effects experiments to enable the development of new fuel concepts in a shorter time frame. One of the key challenges to successfully leveraging accelerated irradiation tests will be understanding the artifacts that may be introduced with accelerated accumulation of dose and/or burnup. This work presents phase field (MARMOT) simulations of the evolution of representative 2D UO2 microstructures up to 40 MWd/kgU. Simulations were performed under both commercial light water reactor fuel conditions as well as those that would be expected for highly accelerated (~10x) burnup conditions similar to those used in the MiniFuel irradiations in Oak Ridge National Laboratory’s High Flux Isotope Reactor. The phase field model was coupled with a discrete nucleation algorithm to model re- structuring at high burnup. The effect of the different fission rates in both microstructures was investigated at two temperatures: 650?C and 800?C. The lower temperature simulations both showed an onset of restructuring at nearly 60 MWd/kgU. More extensive restructuring was obtained in the MiniFuel microstructure compared with that of the PWR fuel. At 800?C, no restructuring was obtained as a result of the thermally activated diffusion of Xe atoms and U vacancies to fission gas bubbles, which reduces the nucleation driving force. These results highlight the importance of using modeling and simulation tools to inform the environmental conditions during targeted accelerated irradiation tests to extract the most useful fuel performance data.

accelerated fuel qualification, Phase Field, Restr↗
DOE OSTI2021

A General Strategy for Batch Development of High-Performance and Cost-Effective Sodium Layered Cathodes

High-performance and low-cost transition metal (TM) layered oxides using earth abundant elements are promising cathodes for Na-ion batteries. However, it is challenging to obtain desired materials because the large Na size, different Na occupations and various layer stacking sequences multiply the complication in determining the structure of a given composition and exacerbate uncertainty to the structure-property correlation. In this work, we use the attainment of desired NaxMnyNiZTM1-y-zO2-based cathode materials as an example to demonstrate a general roadmap for batch development of sodium layered cathodes towards practical applications. A synthesis phase diagram of NaxMnyNi1-yO2 was created for pre-screening and rational selection of the platform material of P2/O3-structured Na0.85Mn0.6Ni0.4O2. Cationic potential was leveraged in elemental substitution to further promote the material structural stability and electrochemical performance. Several cost-effective O3 and P2/O3 hybrid cathode materials have been obtained, all of which demonstrate excellent performance. In particular, the Na0.85Mn0.5Ni0.4Ti0.1O2 delivers a high specific capacity of ~130 mAh/g between 2-4 V and 91% retention after 500 cycles. The work discovers multiple materials as high-performance and cost-effective Na-ion battery cathodes and offers critical guidance to the rational design of future layered cathode materials.

Xiao, Biwei↗
DOE OSTI2023

Future precipitation increase constrained by climatological pattern of cloud effect

The fractional increase in global mean precipitation (?P ¯/P ¯) is a first-order measure of the hydrological cycle intensification under anthropogenic warming. However, ?P ¯/P ¯ varies by a factor of more than three among model projections, hindering credible assessments of the associated climate impacts. The uncertainty in ?P ¯/P ¯ stems from uncertainty in both hydrological sensitivity (global mean precipitation increase per unit warming) and climate sensitivity (global mean temperature increase per forcing). Here, by investigating hydrological and climate sensitivities in a unified surface-energy-balance perspective, we find that both sensitivities are significantly correlated with surface shortwave cloud feedback, which is further linked to the climatological pattern of cloud shortwave effect. The observed pattern of cloud effect thus constrains both sensitivities and consequently constrains ?P ¯/P ¯. The 5%-95% uncertainty range of ?P ¯/P ¯ from 1979-2005 to 2080-2100 under the high-emission (moderate-emission) scenario is constrained from 6.34±3.53% (4.19±2.28%) in the raw ensemble-model projection to 7.03±2.59% (4.63±1.71%). The constraint thus suggests a higher most-likely ?P ¯/P ¯ and reduces the uncertainty by ~25%, providing valuable information for impact assessments.

Zhou, Wenyu↗
DOE OSTI2024

An antiferromagnetic diode effect in even-layered MnBi 2 Te 4

In a p–n junction, the separation of positive and negative charges leads to diode transport, in which charge flows in only one direction. Non-centrosymmetric polar conductors are intrinsic diodes that could be of use in the development of nonlinear applications. Such systems have recently been extended to non-centrosymmetric superconductors, and the superconducting diode effect has been observed. Here, in this paper, we report an antiferromagnetic diode effect in a centrosymmetric crystal without directional charge separation. We observed large second-harmonic transport in a nonlinear electronic device enabled by the compensated antiferromagnetic state of even-layered MnBi 2 Te 4 . We show that this antiferromagnetic diode effect can be used to create in-plane field-effect transistors and microwave-energy-harvesting devices. We also show that electrical sum-frequency generation can be used as a tool to detect nonlinear responses in quantum materials.

electronic properties and materials↗
DOE OSTI2022

Artificial dynamical effects in quantum field theory

In Newtonian mechanics, studying a system in a non-Galilean reference frame can lead to inertial pseudoforces appearing, such as the centrifugal force that seems to arise in dynamics analysed in a rotating frame. Likewise, artificial effects may arise in relativistic quantum field theory (QFT) if a system is studied in a framework that violates Poincaré invariance. Here, we highlight how such issues complicate the traditional canonical quantization of QFTs and can lead to a subjective description of natural phenomena. By contrast, the treatment of the same problem using light-front quantization is free from spurious pseudoeffects because Poincaré invariance is effectively preserved for all practical intents and purposes. We illustrate these statements using several examples: the Gerasimov-Drell-Hearn (GDH) relation, a fundamental feature of QFT; the absence of any measurable impact of Lorentz contraction in high-energy collisions; and the fictitious character of vacuum fluctuation contributions to the cosmological constant.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2021

Effects of nanoconfinement and surface charge on iron adsorption on mesoporous silica

Here, we present a combined molecular dynamics (MD) simulation and X-ray absorption fine structure (XAFS) spectroscopic investigation of aqueous iron adsorption on nanoconfined amorphous silica surfaces. The simulation models examine the effects of pore size, pH (surface charge), iron valency, and counter-ion (chloride or hydroxide). The simulation methods were validated by comparing the coordination environment of adsorbed iron with coordination numbers and bond lengths derived from XAFS. In the MD models, nanoconfinement effects on local iron coordination were investigated by comparing results for unconfined silica surfaces and in confined domains within 2 nm, 4 nm, and 8 nm pores. Experimentally, coordination environments of iron adsorbed onto mesoporous silica with 4 nm and 8 nm pores at pH 7.5 were investigated. The effect of pH in the MD models was included by simulating Fe(II) adsorption onto negatively charged SiO 2 surfaces and Fe(III) adsorption on neutral surfaces. The simulation results show that iron adsorption depends significantly on silica surface charge, as expected based on electrostatic interactions. Adsorption on a negatively charged surface is an order of magnitude greater than on the neutral surface, and simulated surface coverages are consistent with experimental results. Pore size effects from the MD simulations were most notable in the adsorption of Fe(II) at deprotonated surface sites (SiO - ), but adsorption trends varied with concentration and aqueous Fe speciation. The coordination environment of adsorbed iron varied significantly with the type of anion. Considerable ion pairing with hydroxide anions led to the formation of oligomeric surface complexes and aqueous species, resulting in larger iron hydroxide clusters at higher surface loadings.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

Global gyrokinetic study of shaping effects on electromagnetic modes at NSTX aspect ratio with ad hoc parallel magnetic perturbation effects

Plasma shaping may have a stronger effect on global turbulence in tight-aspect-ratio tokamaks than in conventional-aspect-ratio tokamaks due to the higher toroidicity and more acute poloidal asymmetry in the magnetic field. In addition, previous local gyrokinetic studies have shown that it is necessary to include parallel magnetic field perturbations in order to accurately compute growth rates of electromagnetic modes in tight-aspect-ratio tokamaks. In this work, the effects of elongation and triangularity on global, ion-scale, linear electromagnetic modes are studied at National Spherical Torus Experiment (NSTX) aspect ratio and high plasma β using the global gyrokinetic particle-in-cell code XGC. The effects of compressional magnetic perturbations are approximated via a well-known modification to the particle drifts that was developed for flux-tube simulations [Joiner et al., Phys. Plasmas 17, 072104 (2010)], without proof of its validity in a global simulation, with the gyrokinetic codes GENE and GEM being used for local verification and global cross-verification. Magnetic equilibria are re-constructed for each distinct plasma profile that is used. Coulomb collision effects are not considered. Within the limitations imposed by the present study, it is found that linear growth rates of electromagnetic modes (collisionless microtearing modes and kinetic ballooning modes) are significantly reduced in a high-elongation and high-triangularity NSTX-like geometry compared to a circular NSTX-like geometry. For example, growth rates of kinetic ballooning modes at high- β are reduced to the level of that of collisionless trapped electron modes.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2024

The nontrivial effects of annealing on superconducting properties of Nb single crystals

The effect of annealing on the superconducting properties of niobium single crystals was studied using optical, magnetic, and scanning tunneling microscopy (STM) methods. Pieces of the same crystal boule were studied before and after the annealing at 800 ${^\circ}\textrm{C}$, 1400 ${^\circ}\textrm{C}$, and near the melting point of niobium (2477 ${^\circ}\textrm{C}$). The initial samples had a high hydrogen content and low-temperature imaging revealed large hydrides (hundreds of micrometers) appearing below 190 K. The formation of these large precipitates is already completely suppressed by annealing at 800 ${^\circ}\textrm{C}$. However, the overall superconducting properties of the annealed samples did not improve and, in fact, worsened. In particular, the superconducting transition temperature decreased, the upper critical field increased, and the pinning strength increased. In the STM study, the sample was annealed initially at 400 ${^\circ}\textrm{C}$, measured, annealed at 1700 ${^\circ}\textrm{C}$, and measured again. The STM revealed a ‘dirty’ superconducting gap with a significant spatial variation in tunneling conductance after annealing at 400 ${^\circ}\textrm{C}$. The clean gap was recovered after annealing at 1700 ${^\circ}\textrm{C}$. This is likely due to oxygen redistribution near the surface, which is always covered by oxide layers in as-grown crystals. Our results indicate that vacuum annealing at least up to 1400 ${^\circ}\textrm{C}$, while removing a large percentage of hydrogen, introduces additional nanosized defects, likely hydride precipitates, that act as efficient pair-breaking and pinning centers. The dimensionless scattering rate is estimated to have increased from $\Gamma = 0.2$ to about $\Gamma = 0.4$ after annealing at 1400 ${^\circ}\textrm{C}$. These results on single crystals differ drastically from those obtained in polycrystalline bulk niobium (i.e. cut from superconducting radio-frequency cavities), where annealing is known to have a significant positive effect that is attributed to the improvement of the crystalline structure masking the more subtle influence of the hydrides.

43 PARTICLE ACCELERATORS↗