Search NASA⌕ Search

SEARCH · Search NASA

Results for “Electrical propertied and parameters”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Study of the crystal structure of SnS thin films by atomic layer deposition

Tin monosulfide, SnS, absorbs visible light and holds promise for thin-film photovoltaics. However, the optoelectronic properties of this material vary among the different structural phases, and control over the phase of vapor deposited SnS thin films is not well understood. In order to study the phases and crystallographic orientations of SnS films, films with thicknesses of 90 nm–750nm were prepared by atomic layer deposition (ALD) at temperatures between 80 °C and 200 °C on amorphous silicon dioxide (a-SiO2) and single-crystal sodium chloride (NaCl). We show that the crystal structures and orientations of the ALD-SnS thin films vary with deposition temperature, film thickness, and substrate. We confirm the presence of metastable cubic π-SnS in co-existence with the thermodynamically stable orthorhombic α-SnS and find that the π phase is more prevalent at lower deposition temperatures. The films grown on a-SiO2 are textured, the degree of texturing increases with lower temperature or higher thickness, and the deposited phase is also thickness dependent. Upon annealing, which is known to promote SnS grain growth, all films revert to orthorhombic α-SnS. The films grown on the NaCl(100) substrate exhibit a much higher degree of texturing and show different preferred orientations dependent on the phase: π-(400) and α-(111) or α-(040). In addition, we demonstrate a proof-of-concept device made from the highly oriented SnS grown on NaCl.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Relationship between charge transfer state electroluminescence and the degradation of organic photovoltaics

The degradation of archetype organic photovoltaics comprising both vacuum and solution-deposited bulk heterojunction active regions is investigated and quantified using a theory based on detailed balance, which relates the open-circuit voltage to the efficiency of charge transfer state emission. To describe this relationship, we account for the difference between electroluminescent external quantum efficiency and the charge transfer emission efficiency. Here, an empirical factor, m, is introduced to distinguish between nonradiative defect sites both within, m = 1, and outside, m >1, of the photoactive heterojunction. The m-factor is used to determine the primary sources of degradation for archetype solution- and vacuum-processed material systems. We conclude that degradation occurs primarily within the donor–acceptor heterojunction for the vacuum-processed devices (where m = 1.020 ± 0.002) and outside of the photoactive heterojunction for the solution-processed devices studied, both with and without an anode buffer layer (where m = 2.93 ± 0.09 and m = 1.90 ± 0.01, respectively).

14 SOLAR ENERGY↗
DOE OSTI2021

Analytic evaluation of energy first derivatives for spin–orbit coupled-cluster singles and doubles augmented with noniterative triples method: General formulation and an implementation for first-order properties

The paper reports a formulation of analytic energy first derivatives for the coupled-cluster singles and doubles augmented with noniterative triples [CCSD(T)] method with spin–orbit coupling included at the orbital level and an implementation for evaluation of first-order properties. Here, the new development extends the applicability of relativistic coupled cluster methods for heavy-element chemistry and spectroscopy. Benchmark calculations of first-order properties including dipole moments and electric-field gradients using the corresponding exact two-component property integrals are presented for heavy-element containing molecules to demonstrate the usefulness of the present analytic scheme.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2021

Contact-free reversible switching of improper ferroelectric domains by electron and ion irradiation

Focused ion beam (FIB) and scanning electron microscopy (SEM) are used to reversibly switch improper ferroelectric domains in the hexagonal manganite ErMnO 3 . Surface charging is achieved by local ion (positive charging) and electron (positive and negative charging) irradiation, which allows controlled polarization switching without the need for electrical contacts. Polarization cycling reveals that the domain walls tend to return to the equilibrium configuration obtained in the as-grown state. The response of sub-surface domains is studied by FIB cross-sectioning, enabling imaging in the direction perpendicular to the applied electric field. The results clarify how the polarization reversal in hexagonal manganites progresses at the level of domains, resolving both domain wall movements and the nucleation and growth of new domains. Our FIB-SEM based switching approach is applicable to all ferroelectrics where a sufficiently large electric field can be built up via surface charging, facilitating contact-free high-resolution studies of the domain and domain wall response to electric fields in 3D.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Example of exponentially enhanced magnetic reconnection driven by a spatially bounded and laminar ideal flow

In laboratory and natural plasmas of practical interest, the spatial scale Δ d at which magnetic field lines lose distinguishability differs enormously from the scale a of magnetic reconnection across the field lines. In the solar corona, plasma resistivity gives a/Δ d ~ 10 12 , which is the magnetic Reynold number R m . The traditional resolution of the paradox of disparate scales is for the current density j associated with the reconnecting field Brec to be concentrated by a factor of Rm by the ideal evolution, so j ~ B rec /µ 0 Δ d . A second resolution is for the ideal evolution to increase the ratio of the maximum to minimum separation between pairs of arbitrarily chosen magnetic field lines, Δ max /Δ min , when calculated at various points in time. Reconnection becomes inevitable where Δ max /Δ min ~ R m . A simple model of the solar corona will be used for a numerical illustration that the natural rate of increase in time is linear for the current density but exponential for Δ max /Δ min . Reconnection occurs on a time scale and with a current density enhanced by only ln(a/Δ d ) from the ideal evolution time and from the current density B rec /µ 0 a. In both resolutions, once a sufficiently wide region, Δ r , has undergone reconnection, the magnetic field loses static force balance and evolves on an Alfv´enic time scale. The Alfv´enic evolution is intrinsically ideal but expands the region in which Δ max /Δ min is large.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2021

Explaining an unusual electromigration behavior—A comprehensive experimental and theoretical analysis using finite element method

In metallic interconnects, it is generally assumed that electromigration (EM) failure location is independent of the applied electrical current and always occurs at the highest-current-density area. Our experiments show otherwise. We designed an Al interconnect that alters its failure location by only varying the applied current density. The failure occurs near the high for a current above 2 × 10 7 A/cm 2 , but at a location with 59% of the maximum for lower current densities. Thermoreflectance thermal imaging is employed to gather time-dependent high-resolution spatial temperature distributions of the Al interconnect during EM. More importantly, we propose a computationally inexpensive 2D finite element method that tracks EM evolution in time and matches well with the observations from different experimental conditions. A detailed analysis covering the major driving forces of EM is carried out to understand the complex physics behind EM. The atomic depletion rate contributed by each force is quantitatively studied. By examining the results from every tested experimental condition, the model reveals that the temperature gradient is the key reason causing atomic depletion near the failure location. Graphical illustrations and qualitative analysis are provided to intuitively show the key findings of our work.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2021

Illumination-induced modulation of conductivity and Gunn oscillation properties in epitaxial GaAs

In this work, we illuminate a gallium arsenide (GaAs) Gunn device and study the light-induced changes of Gunn oscillation properties. We observe that illumination leads to the modulation of the Gunn threshold voltage, the Gunn oscillation magnitude, and the coherency of Gunn oscillation, with the nature of the modulation being closely related to the position of illumination on the device. These effects are attributed to the generation of optically excited carriers, which results in the modulation of conductivity and the electric field profile along the device. The finite element method is used to simulate the change of the field profile of the Gunn device caused by illumination. We also report an unexpected phenomenon of Gunn oscillation property manipulation with an optical chopper. In addition, wavelength-dependent, power-dependent, and pulsed illumination measurements are performed to help with further understanding the observations.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2021

Defect characterization and charge transport measurements in high-resolution Ni/n-4H-SiC Schottky barrier radiation detectors fabricated on 250 μ m epitaxial layers

Advances in the growth processes of 4H-SiC epitaxial layers have led to the continued expansion of epilayer thickness, allowing for the detection of more penetrative radioactive particles. In this work, we report the fabrication and characterization of high-resolution Schottky barrier radiation detectors on 250 μm thick n-type 4H-SiC epitaxial layers, the highest reported thickness to date. Several 8 × 8 mm 2 detectors were fabricated from a diced 100 mm diameter 4H-SiC epitaxial wafer grown on a conductive 4H-SiC substrate with a mean micropipe density of 0.11 cm -2 From the Mott–Schottky plots, the effective doping concentration was found to be in the range (0.95–1.85) × 10 14 cm -3 , implying that full depletion could be achieved at ~5.7 kV (0.5 MV/cm at the interface). The current-voltage characteristics demonstrated consistently low leakage current densities of 1–3 nA/cm 2 at a reverse bias of -800 V. This resulted in the pulse-height spectra generated using a 241Am alpha source (5486 keV) manifesting an energy resolution of less than 0.5% full width at half maximum (FWHM) for all the detectors at -200 V. The charge collection efficiencies (CCEs) were measured to be 98–99% with no discernable correlation to the energy resolution. A drift-diffusion model fit to the variation of CCE as a function of bias voltage, revealed a minority carrier diffusion length of ~10 μm. Deep level transient spectroscopy measurements on the best resolution detector revealed that the excellent performance was the result of having ultralow concentrations of the order of 1011 cm-3 lifetime limiting defects—Z 1/2 and EH 6/7 .

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2021

The impact of interfacial Si contamination on GaN-on-GaN regrowth for high power vertical devices

The development of gallium nitride (GaN) power devices requires a reliable selective-area doping process, which is difficult to achieve because of ongoing challenges associated with the required etch-then-regrow process. The presence of silicon (Si) impurities of unclear physical origin at the GaN regrowth interface has proven to be a major bottleneck. Furthermore, this paper investigates the origin of Si contamination at the epitaxial GaN-on-GaN interface and demonstrates an approach that markedly reduces its impact on device performance. An optimized dry-etching approach combined with UV-ozone and chemical etching is shown to greatly reduce the Si concentration levels at the regrowth interface, and a significant improvement in a reverse leakage current in vertical GaN-based p–n diodes is achieved.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Strong interlayer charge transfer due to exciton condensation in an electrically isolated GaAs quantum well bilayer

We introduce a design of electrically isolated “floating” bilayer GaAs quantum wells (QW), in which application of a large gating voltage controllably and highly reproducibly induces charges that remain trapped in the bilayer after removal of the gating voltage. At smaller gate voltages, the bilayer is fully electrically isolated from external electrodes by thick insulating barriers. This design permits full control of the total and differential densities of two coupled 2D electron systems. The floating bilayer design provides a unique approach for studying systems inaccessible by simple transport measurements. It also provides the ability to measure the charge transfer between the layers, even when the in-plane resistivities of the 2D systems diverge. We measure the capacitance and inter-layer tunneling spectra of the QW bilayer with independent control of the top and bottom layer electron densities. Our measurements display strongly enhanced inter-layer tunneling current at v T =1, a signature of exciton condensation of a strongly interlayer-correlated bilayer system. With fully tunable densities of individual layers, the floating bilayer QW system provides a versatile platform to access previously unavailable information on the quantum phases in electron bilayer systems.

42 ENGINEERING↗
DOE OSTI2021

Electronic and optical properties of Zn-doped β-Ga 2 O 3 Czochralski single crystals

β-Ga 2 O 3 has several soluble deep acceptors that impart insulating behavior. In this study, we investigate Zn doping (0.25at.%) in bulk Czochralski and vertical gradient freeze β-Ga 2 O 3 . Representative crystals were assessed for orientation (electron backscatter diffraction and Raman spectroscopy), purity (glow discharge mass spectrometry and secondary ion mass spectrometry), optical properties (ultraviolet to near infrared absorption), and electrical properties (resistivity and current–voltage). Purity measurements indicate that Zn evaporation is insufficient to inhibit doping of Zn into β-Ga 2 O 3 . Hybrid functional calculations show Zn substitutes nearly equally on tetrahedral and octahedral sites, with less than ~0.1eV preference for the octahedral (Ga II ) site. Furthermore, calculations show that Zn Ga acts as a deep acceptor with trapping levels ~1.3 and ~0.9eV above the valence band for one and two holes, respectively. The solubility and electronic behavior of Zn dopants are consistent with measured concentrations >1×10 18 atoms/cm 3 and electrical measurements that show resistivity 10 11 –10 13 Ωcm, with no p-type conduction.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Strong effect of scandium source purity on chemical and electronic properties of epitaxial Sc x Al 1–x N/GaN heterostructures

Epitaxial multilayer heterostructures of Sc x Al 1–x N/GaN with Sc contents x = 0.11–0.45 are found to exhibit significant differences in structural quality, chemical impurity levels, and electronic properties depending on the starting Sc source impurity levels. A higher purity source leads to a 2–3 orders of magnitude reduction in the carbon, oxygen, and fluorine unintentional doping densities in MBE-grown Sc x Al 1–x N/GaN multilayers. Electrical measurements of Sc x Al 1–x N/n + GaN single heterostructure barriers show a 5–7 orders of magnitude reduction in the electrical leakage for films grown with a higher purity Sc source at most Sc contents. The measured chemical and electrical properties of epitaxial Sc x Al 1–x N highlight the importance of the starting Sc source material purity for epitaxial device applications that need these highly piezoelectric and/or ferroelectric transition-metal nitride alloys.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Electrical characterization of freestanding complex oxide ferroelectrics: Artifacts and experimental precautions

Recently, freestanding complex oxide ferroelectric materials have gained attention due to their tremendous potential in electronic and mechanical engineering applications. Whether these materials in a freestanding form exhibit intrinsically different behavior than in a strongly bonded as-grown state is a topic of ongoing exploration. Several factors such as circuit configuration, substrates, and electronic measurement conditions can affect probing the intrinsic properties of these materials and complicate the conclusive outcome of such exploration. The importance of maintaining the same experimental conditions for a comparative study of these materials in as-grown and freestanding states is discussed here

36 MATERIALS SCIENCE↗
DOE OSTI2021

Magnetic field sensors for detection of trapped flux in superconducting radio frequency cavities

Superconducting radio-frequency (SRF) cavities are fundamental building block of modern particle accelerators. They operate at liquid helium temperatures 2-4 K to achieve very high quality factors 1e10-1e11. Trapping of magnetic flux within the superconductor is a significant contribution to the residual RF losses which limit the achievable quality factor. Suitable diagnostic tools are in high demand to understand the mechanisms of flux trapping in technical superconductors and the fundamental components of such diagnostic tool are magnetic field sensors. We have studied the performance of commercially available Hall probes, anisotropic magnetoresistive sensors and flux-gate magnetometers with respect to their sensitivity and capability to detect localized, low magnetic flux amplitudes, of the order of few tens of magnetic flux quantum at liquid helium temperature. Although Hall probes have the lowest magnetic field sensitivity (~96$ nV$/microT at 2 K), their physical dimensions are such that they have the ability to detect the lowest number of trapped vortices among the three type of sensors. Hall probes and anisotropic magnetoresistive sensors have been selected to be used in a setup to map regions of trapped flux on the surface of a single-cell SRF cavity.

47 OTHER INSTRUMENTATION↗
DOE OSTI2021

Wake-up and fatigue mechanisms in ferroelectric Hf 0.5 Zr 0.5 O 2 films with symmetric RuO 2 electrodes

In this work, the mechanisms leading to wake-up and fatigue in ferroelectric hafnium zirconium oxide thin film devices with symmetric RuO 2 electrodes are investigated via polarization, relative permittivity, dielectric nonlinearity, pyroelectric coefficient, and microfocus X-ray diffraction (XRD) measurements. The devices are observed to wake-up for up to 10 3 bipolar pulsed field cycles, after which fatigue occurs with the polarization approaching zero following 10 8 cycles. Wake-up is accompanied by a decrease in both high-field permittivity and hysteresis loop pinching and an increase in pyroelectric coefficient, indicating that the wake-up process involves a combination of transformations from the tetragonal to the orthorhombic phase and domain depinning from defect redistribution. Fatigue is observed to coincide with an increase in irreversible domain wall motion and a decrease in pyroelectric coefficient. Finite pyroelectric coefficients are measured on fully fatigued devices, indicating that domain pinning is a strong contributor to fatigue and that fatigued devices contain domain structures that are unable to switch under the fields applied for measurement. Microfocus XRD patterns measured on each device reveal that the phase constitution is qualitatively unaffected by the field cycling and resultant polarization fatigue. This data indicates that the wake-up process has contributions from both phase transformations and domain depinning, whereas the fatigue process is driven primarily by domain pinning, and the near-zero measured switchable polarization is actually a poled device with immobile domains. These observations provide insight into the physical changes occurring during field cycling of HfO 2 -based ferroelectrics while examining a possible oxide electrode material for silicon CMOS device implementation.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2021

Intrinsic synaptic plasticity of ferroelectric field effect transistors for online learning

Nanoelectronic devices emulating neuro-synaptic functionalities through their intrinsic physics at low operating energies is imperative toward the realization of brain-like neuromorphic computers. In this work, we leverage the non-linear voltage dependent partial polarization switching of a ferroelectric field effect transistor to mimic plasticity characteristics of biological synapses. Here, we provide experimental measurements of the synaptic characteristics for a 28nm high-k metal gate technology based device and develop an experimentally calibrated device model for large-scale system performance prediction. Decoupled read-write paths, ultra-low programming energies and the possibility of arranging such devices in a cross-point architecture demonstrate the synaptic efficacy of the device. Our hardware-algorithm co-design analysis reveals that the intrinsic plasticity of the ferroelectric devices has potential to enable unsupervised local learning in edge devices with limited training data

42 ENGINEERING↗
DOE OSTI2021

Molecular beam epitaxy of phase-pure antiperovskite Sr 3 SnO thin films

The antiperovskite oxide Sr 3 SnO has attracted substantial interest due to its topologically non-trivial band structure. Sr-deficient Sr3-xSnO can become superconducting, making it a candidate intrinsic topological superconductor. Here, we show that epitaxial, phase-pure Sr 3-x SnO films can be synthesized by molecular beam epitaxy (MBE) using solid Sr and SnO 2 sources. Here, we show that Sn-rich growth conditions result in a large amount of a Sn-rich impurity phase, which is challenging to detect in x-ray diffraction. Carrier densities and the amount of the impurity phase change systematically with the growth conditions, indicating that MBE provides excellent control over the films' stoichiometry. We discuss the electrical properties, including quantum interference phenomena, which support the topological nature of the films.

36 MATERIALS SCIENCE↗
DOE OSTI2022

A trapping tolerant drain current based temperature measurement of β -Ga 2 O 3 MOSFETs

The drain current temperature dependence is an efficient way to determine the channel temperature in semiconductor devices; however, it has been challenging to use due to the potential interference of trapping effects. A trapping tolerant method is proposed, illustrated here for Ga 2 O 3 MOSFETs, making in situ temperature measurements possible, allowing a thermal resistance of 59 K∙mm/W to be measured in Ga 2 O 3 MOSFETs. However, neglecting the effect of trapping causes an error of ~15% in the channel temperature measured using the drain current. 3D simulations show that the measured channel temperature is the average temperature value between source and drain contact.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗