Search NASA⌕ Search

SEARCH · Search NASA

Results for “Engine efficiency”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Demonstration of Better than Diesel Efficiency and Soot Emissions using Gasoline Compression Ignition in a Light Duty Engine with a Fuel Pressure Limitation

Increasing regulatory demand to reduce CO2 emissions has led to a focus on advanced combustion strategy development to improve overall engine efficiency. Gasoline compression ignition (GCI) has been demonstrated by others to have the potential to meet future CO2 regulations and emissions while achieving comparable to better efficiency than conventional diesel compression ignition (DCI). Soot and NOx emissions are also reduced significantly by using gasoline instead of diesel in compression ignition engines due to differences in composition, fuel properties, and reactivity. In comparison with diesel fuel, gasoline has a higher volatility and more resistance to autoignition, therefore, its longer ignition delay time will allow for better mixing of the air-fuel charge before combustion. In this study, a GCI combustion system has been tested in a Hyundai 2.2L engine as part of a US Department of Energy funded project. A double-injection strategy was tested from mid-to-high loads (5-20 bar BMEP) and for engine speeds in the range of 1200-3000 rpm. Up to 43.4% brake thermal efficiency was achieved using the GCI mode versus 41% using DCI mode. The GCI mode has demonstrated two distinct strategies that work at different load ranges, partially premixed compression ignition (PPCI) and mixing-controlled compression ignition (MCCI). Overall, this study shows that for similar engine-out NOx levels, GCI mode had higher brake thermal efficiency than DCI with lower fuel pressure and EGR required.

02 PETROLEUM↗
DOE OSTI2023

Holistic energy landscape management in 2D/3D heterojunction via molecular engineering for efficient perovskite solar cells

Constructing two-dimensional (2D) perovskite atop of 3D with energy landscape management is still a challenge in perovskite photovoltaics. Here, we report a strategy through designing a series of π-conjugated organic cations to construct stable 2D perovskites and to realize delicate energy level tunability at 2D/3D heterojunctions. As a result, the hole transfer energy barriers can be reduced both at heterojunctions and within 2D structures, and the preferable work function shift reduces charge accumulation at interface. Leveraging these insights and also benefitted from the superior interface contact between conjugated cations and poly(triarylamine) (PTAA) hole transporting layer, a solar cell with power conversion efficiency of 24.6% has been achieved, which is the highest among PTAA-based n-i-p devices to the best of our knowledge. The devices exhibit greatly enhanced stability and reproducibility. This approach is generic to several hole transporting materials, offering opportunities to realize high efficiency without using the unstable Spiro-OMeTAD.

14 SOLAR ENERGY↗
DOE OSTI2024

Grain boundary engineering for efficient and durable electrocatalysis

Grain boundaries in noble metal catalysts have been identified as critical sites for enhancing catalytic activity in electrochemical reactions such as the oxygen reduction reaction. However, conventional methods to modify grain boundary density often alter particle size, shape, and morphology, obscuring the specific role of grain boundaries in catalytic performance. This study addresses these challenges by employing gold nanoparticle assemblies to control grain boundary density through the manipulation of nanoparticle collision frequency during synthesis. We demonstrate a direct correlation between increased grain boundary density and enhanced two-electron oxygen reduction reaction activity, achieving a significant improvement in both specific and mass activity. Additionally, the gold nanoparticle assemblies with high grain boundary density exhibit remarkable electrochemical stability, attributed to boron segregation at the grain boundaries, which prevents structural degradation. This work provides a promising strategy for optimizing the activity, selectivity, and stability of noble metal catalysts through precise grain boundary engineering.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Electrolyte Engineering for Efficient Electrochemical Nitrate Reduction to Ammonia on a Titanium Electrode

Nitrates from agricultural runoff and industrial waste streams are a notorious waste product and hazardous pollutant. Traditional electrochemical water remediation approaches aim to solve this problem by converting nitrates to environmentally benign N 2 while minimizing the production of environmentally hazardous side products such as ammonia and nitrous oxide in a process known as “denitrification”. We modify this concept and outline an opportunity to optimize the conversion of nitrates into ammonia, which is also a key commodity product used as a fertilizer, potential fuel, and chemical precursor. The electrochemical conversion of nitrates to ammonia recycles the fixed nitrogen and offers an appealing and supplementary alternative to the energy- and resource-intensive Haber-Bosch process. In this study, we investigated the effect of varying electrochemical conditions (pH, nitrate concentration, and applied potential) on the selective reduction of nitrate to ammonia at a titanium cathode. We observed that high concentrations of both protons and nitrate ions are needed to achieve high selectivity, reaching a peak of 82% Faradaic efficiency to ammonia at an applied potential of -1 V versus RHE and a partial current density to NH 3 of -22 mA/cm 2 , using 0.4 M [NO 3 – ] at pH ~0.77. The Ti electrode, as a poor hydrogen evolution catalyst with notable corrosion resistance, provides a large window of operating conditions to achieve high selectivity in the reduction of nitrate anions. Stability of the system was evaluated, and we found a high Faradaic efficiency throughout the course of an 8 h experiment. After electrochemical testing, titanium hydride was observed at the cathode surface. We also show a preliminary technoeconomic study, indicating that it may be feasible to employ an electrochemical strategy for the production of ammonium nitrate.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Integrated linker-regulation and ring-fusion engineering for efficient additive-free non-fullerene organic solar cells

The rational molecular design and structural modification of quasi-two-dimensional fused perylene diimide (quasi-2D FPDI) acceptors have received growing attention for application in non-fullerene organic solar cells (NF-OSCs). Herein, we designed and synthesized two pairs of FPDI acceptors, one in the form of FPDI–π-bridge–FPDI with the π-bridge being either an axisymmetric thiophene (T) or a centrosymmetric thienothiophene (TT) unit, and the other being the corresponding ring-fusion counterpart. Additionally, four small molecule acceptors, namely T-FPDI, TT-FPDI, FT-FPDI and FTT-FPDI, were paired with a common PTB7-Th polymeric electron donor as active materials for a comparative study of the effects of linkers and ring fusion on their photovoltaic performances. The T-FPDI-based NF-OSC exhibited a decent power conversion efficiency (PCE) of 5.50%, while a higher PCE of 7.17% with a simultaneous enhancement in the open circuit voltage ( V oc ), the short-circuit current density ( J sc ) and the fill factor (FF) was achieved for the TT-FPDI-based solar cells. The solar cells based on the ring-fused FT-FPDI and FTT-FPDI acceptors displayed PCEs of 6.75% and 7.66%, respectively, both higher than those of the corresponding non-fused counterparts. Notably, the trade-off between the J sc and V oc , commonly observed in fullerene OSCs, is alleviated in these systems. It is also worth noting that the NF-OSCs based on these FPDI acceptors do not need any solvent additives. Overall, this successful molecular engineering based on novel quasi-2D FPDI building blocks may inspire the development of emergent electron acceptors for high performance additive-free NF-OSCs.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Potential Economic Values of Low-Vapor-Pressure Gasoline-Range Bio-Blendstocks: Property Estimation, and Blending Optimization

Adding non-traditional blendstocks derived from biomass into gasoline has gained renewed interest since it will reduce greenhouse gas emissions and potentially enhance fuel properties and boost engine efficiencies. A competitive bio-blendstock candidate should have either lower prices or superior properties or both relative to conventional gasoline blending components. Gasoline is a mixture of hundreds compounds specified by properties rather than compositions. The addition of bio-blendstocks, most likely oxygenates, will modify the property mixing rules due to the non-ideal interactions between polar and nonpolar components. This paper presents an equation-of-state-based model for predicting Reid vapor pressure, reduced order non-linear property blending models for computing key properties of final gasoline products, and a blending optimization approach to identify key economic drivers. This paper also evaluates the economic values of bio-blendstocks to petroleum refiners using those models. In additional to ethanol, six low-vapor-pressure bio-blendstock candidates were evaluated: i-propanol, n-propanol, i-butanol, diisobutylene, cyclopentanone, and a mixture of furans. Reid vapor pressure, distillation temperatures, and octane numbers were identified as the key economic drivers of adding bio-blendstock. The economic values of those bio-blendstocks range from 2.22 to 4.00 US dollar per gasoline gallon equivalent in 2013 to 2017 5-year averaged price basis. The bio-blendstocks with higher octane numbers may have higher economic values. The uncertainties in property predictions may lead to roughly 15% deviation in the economic value evaluation.

Jiang, Yuan↗
DOE OSTI2022

Hot-Casting-Assisted Liquid Additive Engineering for Efficient and Stable Perovskite Solar Cells

High-performance inorganic–organic lead halide perovskite solar cells (PSCs) are often fabricated with a liquid additive such as dimethyl sulfoxide (DMSO), which retards crystallization and reduces roughness and pinholes in the perovskite layers. However, DMSO can be trapped during perovskite film formation and induce voids and undesired reaction byproducts upon later processing steps. Here, it is shown that the amount of residual DMSO can be reduced in as-spin-coated films significantly through use of preheated substrates, or a so-called hot-casting method. Hot casting increases the perovskite film thickness given the same concentration of solutions, which allows for reducing the perovskite solution concentration. By reducing the amount of DMSO in proportion to the concentration of perovskite precursors and using hot casting, it is possible to fabricate perovskite layers with improved perovskite–substrate interfaces by suppressing the formation of byproducts, which increase trap density and accelerate degradation of the perovskite layers. The best-performing PSCs exhibit a power conversion efficiency (PCE) of 23.4% (23.0% stabilized efficiency) under simulated solar illumination. Furthermore, encapsulated devices show considerably reduced post-burn-in decay, retaining 75% and 90% of their initial and post-burn-in efficiencies after 3000 h of operation with maximum power point tracking (MPPT) under high power of ultraviolet (UV)-containing continuous light exposure.

perovskite-substrate interface↗
DOE OSTI2024

Molecular Precision Engineering for Efficient Binary Organic Photovoltaics through Energy Level and Fibrillar Structure Modulation

Adjusting the energy levels and fibrillar morphology is paramount to enhancing the power conversion efficiency (PCE) of organic solar cells (OSCs). In the present study, an increase in the open-circuit voltage (VOC) is facilitated through the elongation of the alkyl chain within AQx (namely AQx-8), aiming to decrease the free volume ratio (FVR). This reduction in FVR attenuates electron-phonon coupling, thereby augmenting emission efficiency and diminishing the non-radiative energy loss (ΔEnr). To further refine the energy levels and morphological characteristics, the external undecyl chain of AQx-8 is substituted with a shorter carbon chain and cyclohexane noted for its considerable steric hindrance (AQx-H). Additionally, this alteration significantly mitigates intermolecular aggregation, expands the bandgap, and elevates the lowest unoccupied molecular orbital (LUMO) energy level, culminating in an elevated VOC of 0.923 V in devices based on AQx-H. Morphological analysis reveals that blends based on AQx-H exhibit an enhanced multi-length-scale fibrillar structure, which is conducive to exciton dissociation and charge transport, thereby contributing to a high fill factor (FF) nearing 80%. Consequently, this study reports one of the highest binary PCEs documented, standing at 19.5% (with certification at 19.0%).

14 SOLAR ENERGY↗
DOE OSTI2025

Dual aggregation steering in bulk-heterojunction via solvent engineering toward efficient and stable binary organic solar cells

In high-performance organic solar cells (OSCs), efficient charge transport hinges on a well-optimized morphology of the photoactive layer, which depends critically on controlled aggregation and favorable interactions between donor and acceptor materials. In this work, we introduce a cascade solvent system comprising high-boiling-point ethylbenzene (EB) and low-boiling-point chloroform (CF) to finely tune the aggregation behavior of the D18 donor and L8-BO acceptor. The incorporation of EB not only promotes the H-aggregation of D18 and the J-aggregation of L8-BO but also facilitates the formation of ideal nanoscale phase separation, thereby suppressing bimolecular recombination. As a result, devices processed with the EB/CF solvent blend achieve a best power conversion efficiency (PCE) of 19.6 % and enhanced operational stability, outperforming those fabricated with pure CF (17.1 %). In conclusion, this study offers a reliable and effective strategy for optimizing donor and acceptor aggregation, providing a viable pathway toward higher-performance OSCs.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Analysis of pumped thermal energy storage using particle media integrated with concentrating solar power

Pumped Thermal Energy Storage (PTES) is an electricity storage system that converts electricity into thermal energy which is stored and later transformed back into electricity. Previous work has illustrated that particles have low capital costs and can be operated over a wide range of temperatures. PTES with particle storage achieves higher round-trip efficiency and specific power output than when molten salt thermal energy storage is used. This article explores hybrid systems that combine PTES with Concentrating Solar Power (CSP). Hybrid systems share the majority of components thereby reducing costs compared to two stand-alone devices. In addition, hybrid systems can provide multiple services (such as renewable power generation and electricity storage services). Using particle thermal storage in these hybrid concepts provides freedom in choosing the design conditions, since a wide range of operating temperatures is allowable, therefore making it possible to identify hybrid system designs that have good performance. In this article, two concepts for hybrid PTES-CSP are introduced. Thermodynamic models are developed and these are used to evaluate the performance of two hybrid systems. These models account for turbomachinery efficiency, and approach temperature and pressure loss in heat exchangers, as well as other sources of inefficiency, such as motor-generator losses, and air fan power. The “Solar Top-Up” Concept uses CSP to increase the temperature delivered by the charging heat pump. The discharging system uses a topping gas cycle and a bottoming steam cycle to fully exploit the available energy. Using solar heat to increase the maximum temperature from 750 K to 1100 K increases the round-trip efficiency from 41 % to 62 % and the specific work output from 88 kJ/kg to 301 kJ/kg. The second concept is a “Dual-Mode” device which provides both electricity storage and solar electricity generation with the same set of components. The PTES-mode and CSP-mode performance are optimized at different design values but careful parameter selection leads to good performance of both modes: one design produces PTES round-trip efficiency > 60 %, CSP heat engine efficiency > 40 %, and specific work outputs > 150 kJ/kg (for both cycles), when the particle receiver temperature is > 1200 K and maximum heat pump temperature is 1100 K.

14 SOLAR ENERGY↗
DOE OSTI2022

Substrate multiplexed protein engineering facilitates promiscuous biocatalytic synthesis

Enzymes with high activity are readily produced through protein engineering, but intentionally and efficiently engineering enzymes for an expanded substrate scope is a contemporary challenge. One approach to address this challenge is Substrate Multiplexed Screening (SUMS), where enzyme activity is measured on competing substrates. SUMS has long been used to rigorously quantitate native enzyme specificity, primarily for in vivo settings. SUMS has more recently found sporadic use as a protein engineering approach but has not been widely adopted by the field, despite its potential utility. Here, we develop principles of how to design and interpret SUMS assays to guide protein engineering. This rich information enables improving activity with multiple substrates simultaneously, identifies enzyme variants with altered scope, and indicates potential mutational hot-spots as sites for further engineering. These advances leverage common laboratory equipment and represent a highly accessible and customizable method for enzyme engineering.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2023

Silver nanoparticle enhanced metal-organic matrix with interface-engineering for efficient photocatalytic hydrogen evolution

Integrating plasmonic nanoparticles into the photoactive metal-organic matrix is highly desirable due to the plasmonic near field enhancement, complementary light absorption, and accelerated separation of photogenerated charge carriers at the junction interface. The construction of a well-defined, intimate interface is vital for efficient charge carrier separation, however, it remains a challenge in synthesis. Here we synthesize a junction bearing intimate interface, composed of plasmonic Ag nanoparticles and matrix with silver node via a facile one-step approach. The plasmonic effect of Ag nanoparticles on the matrix is visualized through electron energy loss mapping. Moreover, charge carrier transfer from the plasmonic nanoparticles to the matrix is verified through ultrafast transient absorption spectroscopy and in-situ photoelectron spectroscopy. The system delivers highly efficient visible-light photocatalytic H 2 generation, surpassing most reported metal-organic framework-based photocatalytic systems. This work sheds light on effective electronic and energy bridging between plasmonic nanoparticles and organic semiconductors.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Exploiting the fraternal twin nature of thermoelectrics and topological insulators in Zintl phases as a tool for engineering new efficient thermoelectric generators

This review article presents a radical overview of the rich chemistry and physics of Zintl phases as it relates to their interesting structure–property relationships. In particular, it unveils the evolution of topological insulator (TI) and thermoelectric (TE) properties in Zintl materials as having a common origin and as such are driven by the same materials properties ranging from a narrow band gap to a strong spin-orbit coupling effect. To this end, excellent TE properties are ubiquitous in many TIs and because of the ever-increasing interest in the studies of topological properties of matter, several robust theoretical frameworks now exist to provide us with additional intuitive nature and understanding of this exotic phase of matter. Here, this invariably has also led to the screening of tens of thousands of materials for the presence of nontrivial topology using the combined predictive power of machine learning and ab-initio first-principles calculations. On the other hand, studies on TE materials are still largely based on some sort of hit-and-miss approach. Here we leveraged on the similar materials features and intersection between TE and TIs and review several Zintl materials that are already identified as TIs and present how exploiting their bulk and surface states properties can be harnessed for developing highly efficient TE materials for practical purposes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Process systems engineering enables efficient and sustainable membrane-based critical material separations

This presentation summarizes work completed over the past year for PrOMMiS Task 2.1. The first half of the preseation motivates the need to develop sustainable critical mineral separation technology, and how PSE is particularly well-suited to tackle this problem. The second half of the presentation presents preliminary results for the custom cost model for diafiltration (2.1) using the superstructure flowsheet developed by Carnegie Mellon University. The presentation serves to emphasize the multi-disciplinary and collaborate nature of developing a circular economy of critical minerals and materials.

Dougher, Molly↗
DOE OSTI2021

Impact of Materials Properties on Higher-Temperature Engine Operation

Here, we examine the effects on materials temperatures and engine efficiency via simulations of engines operating at temperatures which exceed the thermal limits of today’s materials. Potential focus areas include high-speed, high-load operation (in the fuel-enrichment zone) as well as conditions of selective cooling at lower speeds and loads. We focus on a light-duty DISI and a heavy-duty CI engine using GT-Power. Temperature distributions within the head, block, piston, and valves were obtained from 3D FEA simulations coupled with 1D GT-Power representations of the engine’s gas flow and combustion regions. We use experimentally measured thermal properties of current commercial alloys for specific engine components, as well as candidate developmental alloys with improved temperature tolerance, to gauge the effects of materials properties on engine performance, particularly focusing on operating areas where materials which can withstand higher temperatures can enable intensified combustion conditions and increased specific output. The outcome of this work is guidance on materials selection targets and benefits as OEMs meet engine-performance needs in the coming decades, to include Class 8 line-haul freight vehicles with reduced emissions, as well as design of future near net zero-carbon light-duty range extenders for more rapid electrification of medium- and heavy-duty vehicles.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Efficient turbine engine using integrated ammonia fuel processing

A gas turbine engine includes a core engine that includes a core flow path where air is compressed in a compressor section, communicated to a combustor section, mixed with an ammonia based fuel and ignited to generate a high energy combusted gas flow that is expanded through a turbine section. The turbine section is mechanically coupled to drive the compressor section. An ammonia flow path communicates an ammonia flow to the combustor section. A cracking device is disposed in the ammonia flow path. The cracking device is configured to decompose the ammonia flow into a fuel flow containing hydrogen (H2). At least one heat exchanger is upstream of the cracking device that provides thermal communication between the ammonia flow and a working fluid flow such that the ammonia fluid flow accepts thermal energy from the working fluid flow.

Smith, Lance L.↗
DOE OSTI2022

In-situ optical monitoring of gas turbine blade coatings under operational extreme environments

High temperature material systems consisting of thermal barrier coatings and the underlying superalloys are key to achieving higher gas temperatures which in turn control engine efficiencies and reduce emissions. With engine temperatures in excess of the limits that metallic blades and vanes can endure, advanced monitoring techniques that ensure the integrity and durability of these coatings are paramount to continuous and safe operation. Optical methods have the benefit of being non-invasive and are able to capture data under limited access available for monitoring the hot-section of turbines. Addressing Topic 5 on Advanced Instrumentation, the research and development effort for this project titled “In situ optical monitoring of gas turbine blade coatings under operational extreme environments” was completed by University of Central Florida researchers, including Raghavan (PI) and Ghosh (co-PI). In this project, the research team leveraged intrinsic properties of coatings and rare-earth dopants as active and intelligent “sensors” through their optical properties. The outcomes of this project pave the way for diagnostics of turbine blade coatings, under operating environments, through the development of the sensing thermal barrier coating configurations, calibration and associated instrumentation while ensuring coating integrity and durability goals are concurrently met.

42 ENGINEERING↗