Search NASA⌕ Search

SEARCH · Search NASA

Results for “Enthalpy method”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Modeling of aqueous species interaction energies prior to nucleation in cement-based gel systems

Arguably the most ubiquitous construction material in modern civilization, concrete is enabling the development of megacities around the globe together with increasing living standards in developing nations. However, the exact formation mechanisms of the strength-giving calcium-rich gels remain a topic of debate. Using density functional modeling, we simulate the fundamental solution-based building blocks of cement hydrates (calcium ions and silicate and aluminate monomers) and their propensity to form pair-wise complexes with bonding environments characteristic of those found in calcium-silicate-hydrate, calcium-alumino-silicate-hydrate and sodium-containing calcium-alumino-silicate-hydrate gels, as assessed from Gibbs free energies of chemical reactions. By accurately simulating the high pH pore solution chemistry in Portland cements and related systems, along with discrete solvation of the species, we hypothesize potential early age formation routes of the gels and discuss limitations and future work associated with this approach.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Energy and mechanical properties predictions in Fe-Ni binary system by ab initio calculations

Here, the fcc random solid solutions in Fe-Ni binary system were investigated using ab initio calculations. Density functional theory (DFT) was applied along with supercells generated by the Special Quasi-Random Structure (SQS) method to predict the enthalpy of mixing and magnetic and elastic properties. The results were compared with relevant experimental and computational data produced by other groups. The effect of SQS supercell size and relaxation procedure on the predicted properties of the alloys were also studied. Our calculations show that 16-atoms SQS model provides adequate approach to the mixing energy of the alloy. However, calculation of mechanical properties requires larger supercell. Excellent agreement between experimental and calculated elastic properties was found in fcc region of Fe-Ni system.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Experimental Investigation of Thermodynamic Stabilization in Boron Imidazolate Frameworks (BIFs) Synthesized by Mechanochemistry

This study experimentally explores the energetics for the formation of boron–imidazolate frameworks (BIFs), which are synthesized by mechanochemistry. The topologically similar frameworks employ the same tetratopic linker based on tetrakis(imidazolyl)boric acid but differ in the monovalent cation metal nodes. This permits assessment of the stabilizing effect of metal nodes in frameworks with sodalite (SOD) and diamondoid (dia) topologies. The enthalpy of formation from endmembers (metal oxide and linker), which define thermodynamic stability of the structures, has been determined by use of acid solution calorimetry. The results show that heavier metal atoms in the node promote greater energetic stabilization of denser structures. Overall, in BIFs the relation between cation descriptors (ionic radius and electronegativity) and thermodynamic stability depends on framework topology. Thermodynamic stability increases with the metallic character of the cation employed as the metal node, independent of the framework topology. In conclusion, the results suggest unifying aspects for thermodynamic stabilization across MOF systems.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS2004

Thermodynamics of the Si-O-H System

Thermodynamic functions for Si(OH)4(g) and SiO(OH)2(g) have been measured using the transpiration method. A second law enthalpy of formation and entropy and a third law enthalpy of formation has been calculated for Si(OH)4. The results are in very good agreement with previous experimental measurements, ab-initio calculations, and estimates.

Jacobson, Nathan S.↗
NASA NTRS1990

Recent advances, trends and new perspectives via enthalpy-based finite element formulations for applications to solidification problems

The present paper describes recent advances and trends in finite element developments and applications for solidification problems. In particular, in comparison to traditional methods of approach, new enthalpy-based architectures based on a generalized trapezoidal family of representations are presented which provide different perspectives, physical interpretation and solution architectures for effective numerical simulation of phase change processes encountered in solidification problems. Various numerical test models are presented and the results support the proposition for employing such formulations for general phase change applications.

Tamma, Kumar K.↗
NASA NTRS2011

Bulk Enthalpy Calculations in the Arc Jet Facility at NASA ARC

The Arc Jet Facilities at NASA Ames Research Center generate test streams with enthalpies ranging from 5 MJ/kg to 25 MJ/kg. The present work describes a rigorous method, based on equilibrium thermodynamics, for calculating the bulk enthalpy of the flow produced in two of these facilities. The motivation for this work is to determine a dimensionally-correct formula for calculating the bulk enthalpy that is at least as accurate as the conventional formulas that are currently used. Unlike previous methods, the new method accounts for the amount of argon that is present in the flow. Comparisons are made with bulk enthalpies computed from an energy balance method. An analysis of primary facility operating parameters and their associated uncertainties is presented in order to further validate the enthalpy calculations reported herein.

Thompson, Corinna S.↗
NASA NTRS1974

High-temperature mass spectrometry - Vaporization of group 4-B metal carbides

The high temperature vaporization of the metal-carbon systems TiC, ZrC, HfC, and ThC was studied by the Knudsen effusion - mass spectrometric method. For each system the metal dicarbide and tetracarbide molecular species were identified in the gas phase. Relative ion currents of the carbides and metals were measured as a function of temperature. Second- and third-law methods were used to determine enthalpies. Maximum values were established for the dissociation energies of the metal monocarbide molecules TiC, ZrC, HfC, and ThC. Thermodynamic functions used in the calculations are discussed in terms of assumed molecular structures and electronic contributions to the partition functions. The trends shown by the dissociation energies of the carbides of Group 4B are compared with those of neighboring groups and discussed in relation to the corresponding oxides and chemical bonding. The high temperature molecular beam inlet system and double focusing mass spectrometer are described.

Stearns, C. A.↗
NASA NTRS2002

Enthalpy By Energy Balance for Aerodynamic Heating Facility at NASA Ames Research Center Arc Jet Complex

The NASA Ames Research Center (ARC) Arc Jet Facilities' Aerodynamic Heating Facility (AHF) has been instrumented for the Enthalpy By Energy Balance (EB2) method. Diagnostic EB2 data is routinely taken for all AHF runs. This paper provides an overview of the EB2 method implemented in the AHF. The chief advantage of the AHF implementation over earlier versions is the non-intrusiveness of the instruments used. For example, to measure the change in cooling water temperature, thin film 1000 ohm Resistance Temperature Detectors (RTDs) are used with an Anderson Current Loop (ACL) as the signal conditioner. The ACL with 1000 ohm RTDs allows for very sensitive measurement of the increase in temperature (Delta T) of the cooling water to the arc heater, which is a critical element of the EB2 method. Cooling water flow rates are measured with non-intrusive ultrasonic flow meters.

Hightower, T. Mark↗
NASA NTRS1982

Solutions of the compressible Navier-Stokes equations using the integral method

The integral representation method was used to obtain numerical solutions of the compressible, unsteady, two-dimensional Navier-Stokes equations for subsonic flows. The equations were written with the vorticity, the dilatation, the density, and the enthalpy as the dependent variables. The method was tested by solving the following problems: the flow over a flat plate, around a circular cylinder, and around a Joukowski airfoil. The last two problems involved massive flow separation. The approach offers the capability of confining the domain of computations to the region where two quantities, the vorticity and the difference in dilatation between the real flow and the potential flow around the body, are non-negligible.

Elrefaee, M. M.↗
NASA NTRS1982

The measurement of heats of solution of high melting metallic systems in an electromagnetic levitation field

A method was tested for measuring the enthalpies of mixing of liquid metallic alloying systems, involving the combination of two samples in the electromagnetic field of an induction coil. The heat of solution is calculated from the pyrometrically measured temperature effect, the heat capacity of the alloy, and the heat content of the added sample. The usefulness of the method was tested experimentally with iron-copper and niobium-silicon systems. This method should be especially applicable to high-melting alloys, for which conventional measurements have failed.

Frohberg, M. G.↗
NASA NTRS1993

Reliability enhancement of Navier-Stokes codes through convergence enhancement

Reduction of total computing time required by an iterative algorithm for solving Navier-Stokes equations is an important aspect of making the existing and future analysis codes more cost effective. Several attempts have been made to accelerate the convergence of an explicit Runge-Kutta time-stepping algorithm. These acceleration methods are based on local time stepping, implicit residual smoothing, enthalpy damping, and multigrid techniques. Also, an extrapolation procedure based on the power method and the Minimal Residual Method (MRM) were applied to the Jameson's multigrid algorithm. The MRM uses same values of optimal weights for the corrections to every equation in a system and has not been shown to accelerate the scheme without multigriding. Our Distributed Minimal Residual (DMR) method based on our General Nonlinear Minimal Residual (GNLMR) method allows each component of the solution vector in a system of equations to have its own convergence speed. The DMR method was found capable of reducing the computation time by 10-75 percent depending on the test case and grid used. Recently, we have developed and tested a new method termed Sensitivity Based DMR or SBMR method that is easier to implement in different codes and is even more robust and computationally efficient than our DMR method.

Choi, K.-Y.↗
NASA NTRSDate not supplied

Metal Hydroxide and Oxyhydroxide Gas Database

In a high temperature combustion situation such as a gas turbine or rocket engine, combustion products include water vapor. This water vapor reacts with oxides in the hot-gas-path to form volatile hydroxides and oxyhydroxides. The oxides may be structural oxide components or protective oxides on alloys or non-oxide ceramics. In either case, this enhanced volatilization leads to degradation of components. Reliable thermochemical data for many metal hydroxides and oxyhydroxides has not been available. We review a database put together at NASA over many years based on experimental and ab initio computations for thermochemical data of Al, Si, Ti, Cr, Mn, Y, Zr, La, Ta, Gd, and Yb hydroxides and oxyhydroxides. Experimental methods for measuring thermodynamic quantities of metal hydroxides and oxyhydroxides are limited since the required high temperatures and high pressures preclude many conventional methods. Nonetheless, transpiration has proven a valuable tool in our laboratories for the Si-O-H, Cr-O-H, and Ti-O-H systems. Data are analyzed with second and third law methods. These data can be leveraged with quantum chemistry to provide reliable free energy functions for the third law calculation and comparison to the derived enthalpies of formation. Both wave function and DFT methods can be utilized for deriving the thermodynamic functions for the various metal hydroxides and oxyhydroxides. We have found that, in general, reasonable molecular geometries and spectroscopic data can be derived with a relatively low level of theory, i.e. DFT with the B3LYP functional. Accurate calculations of the enthalpy of formation require higher levels of theory, such as the Coupled Cluster, Singles, Doubles, and perturbative Triples CCSD(T) approach with complete basis sets (CBS). Also, corrections for hindered rotations and anharmonicity are necessary. For some symmetries, the anharmonic correction has proven to be a challenge and we have found that this is only treated properly by certain codes. The database lists the fHo(298), So(298), and Cp in the form Cp = A + BT + CT2 + D/T + E/T2, where A, B, C, D, and E are the fitting constants. Thus, it can be easily used in any of the common computational thermochemistry codes. To date, the database contains 51 gaseous species of the formula MOx(OH)y.

Metal Hydroxides↗
DOE OSTI2026

A methodology for domain overlapping coupling of thermal-hydraulic systems

Multi-scale coupling has increasingly drawn attention as a promising approach for modeling thermal systems. Traditional system codes provide fast and robust predictions at the plant scale, while high-fidelity computational fluid dynamics (CFD)-based tools resolve localized flow and heat transfer phenomena with greater accuracy. By combining these complementary strengths, co-simulations enable multi-scale analysis that would otherwise be computationally prohibitive for a standalone CFD code. Here, this work introduces a robust and problem-agnostic domain overlapping (DO) coupling between the system thermal-hydraulic (STH) code System Analysis Module (SAM) and the coarse-mesh CFD code Pronghorn. Both applications belong to the Comprehensive Reactor Analysis Bundle (BlueCRAB) code suite, a code suite in active development at the Idaho National Laboratory (INL), tailored for multi-physics analysis of advanced reactors. Unlike previous approaches, BlueCRAB supports an agnostic interface between codes based on different fidelity, while its coupling formulation can address arbitrary flow geometries with multiple inlets and outlets in coupled components. The implemented method leads to consistent pressure drops, enthalpies, and scalar concentrations between coupled SAM and Pronghorn simulations. The methodology is demonstrated through two verification tests, which ensure the numerical consistency and conservation across the codes, and through one validation test against experimental data. The proposed problems explore different physical aspects inherent to thermal systems, with particular attention given to nuclear reactor analysis. These include buoyancy-driven flows, complex flow patterns, and setups with multiple inlets and outlets, representing challenges in advanced reactor applications.

22 - GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2025

BlueCRAB Domain Overlapping Coupling: Theory & Verification

Coupling low- and high-fidelity codes is a useful way to model complex engineering systems. Thanks to the high-fidelity code, complex phenomena can be resolved in areas of the system where this is required, yet the efficiency of the lower-fidelity code is still retained in modeling the rest of the system. This document details the theory and implementation of coupling two different thermal-hydraulic codes: the system thermal-hydraulics (STH) code System Analysis Module (SAM) and the coarse-mesh computational fluid dynamics (CFD) code Pronghorn. Both applications are included in the Comprehensive Reactor Analysis Bundle (BlueCRAB) code suite and are based on the Multiphysics Object-Oriented Simulation Environment (MOOSE) framework. The domain overlapping (DO) coupling approach was adopted, as it offers proven advantages over more conventional domain decomposition methods. In the DO coupling, SAM provides Pronghorn with boundary conditions that depend on the system-level simulation of the entire plant. In return, the overlapping coupled SAM components–termed “surrogate components”–receive friction factors and source terms computed online based on the Pronghorn simulation. The framework is designed to be generic and enable coupling regardless of geometry and the number of inlet/outlet boundaries in the DO coupled domain. The developed method leads to consistent pressure drops, enthalpies, and scalar concentrations when comparing the coupled SAM and Pronghorn simulations. This document presents the DO coupling approach, along with two verification and two demonstration cases. The proposed problems explore different physical aspects relevant to nuclear reactor analysis, including buoyancy-driven flows, complex flow patterns, and multiple inlets and outlets. Periodically, new versions of this “BlueCRAB Domain Overlapping Coupling: Theory & Verification” report will be issued to reflect future developments and verification tests.

22 - GENERAL STUDIES OF NUCLEAR REACTORS↗
NASA NTRS1955

Effect of dissociation on thermodynamic properties of pure diatomic gases

A graphical method is described by which the enthalpy, entropy, and compressibility factor for the equilibrium mixture of atoms and diatomic molecules for pure gaseous elements may be obtained and shown for any dissociating element for which the necessary data exist. Results are given for hydrogen, oxygen, and nitrogen. The effect of dissociation on the heat capacity is discussed briefly.

Woolley, Harold W↗
NASA NTRS2012

Photogrammetric recession measurements of an ablating surface

An instrument and method for measuring the time history of recession of an ablating surface of a test article during testing in a high enthalpy thermal test facility, such as an arcjet. The method advances prior art by providing time-history data over the full ablating surface without targets and without any modifications to the test article. The method is non-intrusive, simple to implement, requires no external light source, and does not interfere with normal operations of the arcjet facility.

Schairer, Edward T.↗
DOE OSTI2025

An extension of the localized artificial diffusivity method for immiscible and high density ratio flows

The localized artificial diffusivity (LAD) method is widely regarded as the preferred multi-material regularization scheme for the compact finite difference method, because it is conservative, easy to implement, and generally robust for a wide range of multi-material problems. However, traditional LAD methods face significant challenges when applied to flows with large density ratios and when maintaining thermodynamic equilibrium across material interfaces. These limitations arise from the formulation of the artificial diffusivity flux and the reliance on enthalpy diffusion for interface regularization. Additionally, traditional LAD methods struggle to ensure stability under large density ratio conditions, fail to maintain a finite interface thickness, and are therefore unsuitable for modeling immiscible interfaces. Here, in this work, we discuss the origins of these issues in traditional LAD methods and propose modifications which enable the simulation of large density ratio and immiscible flows. The proposed method targets the artificial diffusion fluxes at gradients and ringing in the volume fraction, rather than the mass fraction in traditional methods, to consistently regularize large density ratio interfaces. Furthermore, the proposed method introduces an artificial bulk density diffusion term to enforce equilibrium conditions across interfaces. To address the challenge of modeling immiscible flows, a conservative diffuse interface term is incorporated into the formulation to ensure a finite interface thickness. Specific consideration is taken in the design of the method to ensure that these crucial properties are maintained for N -material flows. The effectiveness of the proposed method is demonstrated through a series of canonical test cases, and its accuracy is validated by comparison with experimental data on micro-bubble collapse in water. These results highlight the method’s robustness and its ability to overcome the limitations of traditional LAD approaches.

Artificial diffusivity↗