Search NASA⌕ Search

SEARCH · Search NASA

Results for “Extreme event statistics”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3

Pooling Data Improves Multimodel IDF Estimates over Median-Based IDF Estimates: Analysis over the Susquehanna and Florida

Traditional multimodel methods for estimating future changes in precipitation intensity, duration, and frequency (IDF) curves rely on mean or median of models’ IDF estimates. Such multimodel estimates are impaired by large estimation uncertainty, shadowing their efficacy in planning efforts. Here, assuming that each climate model is one representation of the underlying data generating process, i.e., the Earth system, we propose a novel extension of current methods through pooling model data: (i) evaluate performance of climate models in simulating the spatial and temporal variability of the observed annual maximum precipitation (AMP), (ii) bias-correct and pool historical and future AMP data of reasonably performing models, and (iii) compute IDF estimates in a nonstationary framework from pooled historical and future model data. Pooling enhances fitting of the extreme value distribution to the data and assumes that data from reasonably performing models represent samples from the “true” underlying data generating distribution. Through Monte Carlo simulations with synthetic data, we show that return periods derived from pooled data have smaller biases and lesser uncertainty than those derived from ensembles of individual model data. We apply this method to NA-CORDEX models to estimate changes in 24-h precipitation intensity–frequency (PIF) estimates over the Susquehanna watershed and Florida peninsula. Our approach identifies significant future changes at more stations compared to median-based PIF estimates. The analysis suggests that almost all stations over the Susquehanna and at least two-thirds of the stations over the Florida peninsula will observe significant increases in 24-h precipitation for 2–100-yr return periods.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Climatic controls on erosional efficiency vary with lithology across the Himalaya

Although climate can strongly influence erosional efficiency (i.e., erosion rate for a given topography), demonstrating its impact in tectonically active areas has been challenging due to other confounding controlling factors, such as lithology. Here, we show that 10 Be-derived erosion rates and efficiencies in the Himalayan orogen exhibit distinct relationships with climatic factors depending on lithology. We compile 173 10 Be-derived, basin-averaged erosion rates across the orogen, including 12 newly measured rates from the Dibang and Lohit valleys in the easternmost Himalaya, regions characterized by high precipitation magnitudes and variability. We group basins based on lithologies separated by orogen-scale thrust faults and quantify erosional efficiency coefficients based on the relationships between erosion rates and topographic metrics. Our results show that erosion rates and erosional efficiency from sedimentary and metasedimentary rocks along the Himalayan range front display a positive, nonlinear correlation with climatic factors, such as the number of extreme rainfall events and mean annual precipitation rates. In contrast, erosion rates from crystalline lithologies in the hanging wall of the Main Central thrust show a strong correlation with fluvial topography, whereas erosional efficiency shows no statistically significant correlation with climatic factors. Rapid erosion rates and high erosional efficiencies in the eastern Himalayan range front are likely driven by extreme precipitation on tectonically active, steep slopes composed of mechanically weak metasedimentary rocks. Our findings highlight the importance of the interplay between controlling factors, which include tectonics, lithology, and climate, that drive surface erosion and influence the topographic evolution of orogenic systems.

Channel steepness↗

Object-Based Evaluation of Dynamical and Statistical Downscaled Precipitation Products over CONUS

High-resolution precipitation data, generated through dynamical downscaling (DD) or statistical downscaling (SD) of global climate model output, provide critical information for regional climate assessment and adaptation planning. Most downscaling development and validation have focused on accurate gridscale precipitation construction and ignored the spatial structure of precipitation across model grids and at the event scale. However, many applications, e.g., hydrologic modeling and the analysis using the downscaled precipitation, require a reasonable representation of the spatial structure of precipitation within watersheds. Therefore, a set of standard metrics to evaluate the representation of the spatial structure of individual storms across diverse downscaled precipitation products is desired. To address this need, we conducted an object-based evaluation of precipitation in decades-long DD and SD products over the contiguous United States (CONUS). Specifically, we evaluate their ability to reproduce various features of precipitation objects in the observations: total volume, precipitation area, peak intensity, and spatial structure. Multiple metrics (bias, Perkins score, and nonparametric statistical tests) are used to quantify model performance. Our evaluation reveals notable variations in performance among individual products across different climate zones and seasons, as well as between extreme and nonextreme events. In general, most DD products exhibit balanced performance across the four precipitation object features, while SD products vary more significantly in their performance across products. Based on this comprehensive evaluation, we provide guidance on choosing downscaled products for specific regions, seasons, and precipitation object features. These findings and recommendations can inform precipitation-relevant modeling and analysis over CONUS, guide future downscaling technique developments, and provide actionable information for climate impact assessment and adaptation.

Downscaling↗

Deployable sensor system using mesh networking and satellite communication

A sensor system may be configured for continuous operation in a low resource environment and/or in extreme environmental conditions. The sensor system may have sufficient processing capabilities to provide scientific computing for pre-processing, quality control, statistical analysis, event classification, data compression and corrections (e.g., spikes in the data), autonomous decisions and actions, triggering other nodes, and information assurance functions that provide data confidentiality, data integrity, authentication, and non-repudiation. The hardware may have both mesh networking and satellite and cellular communication capability, and may be available for relatively low cost. Such a network provides the flexibility to have potentially any number of nodes be completely independent from one another. Thus, the network may scale across a diverse terrain.

Frigo, Janette↗

Multi-Scenario Extreme Weather Simulator

The Multi-scenario Extreme Weather Simulator (MEWS) takes existing historical weather data and inserts trends and extreme events such as heat waves, hurricanes, extreme precipitation, or winter storms. The code includes functionality for projecting increasing frequency and duration of such events over a large range of statistically sampled realizations of the future. These weather files can then be used in building energy simulations through the Energy Plus software created by DOE. Sandia National Laboratories is a multimission laboratory managed and operated by National Technology & Engineering Solutions of Sandia, LLC, a wholly owned subsidiary of Honeywell International Inc., for the U.S. Department of Energy’s National Nuclear Security Administration under contract DE-NA0003525 SAND2021-8658 O

Villa, Daniel↗

pyTCR: A tropical cyclone rainfall model for python

pyTCR is a climatology software package developed in the Python programming language. It integrates the capabilities of several legacy physical models and increases computational efficiency to allow rapid estimation of tropical cyclone (TC) rainfall consistent with the large-scale environment. Specifically, pyTCR implements a horizontally distributed and vertically integrated model [Zhu et al., 2013] for simulating rainfall driven by TCs. Along storm tracks, rainfall is estimated by computing the cross-boundary-layer, upward water vapor transport caused by different mechanisms including frictional convergence, vortex stretching, large-scale baroclinic effect (i.e., wind shear), topographic forcing, and radiative cooling [Lu et al., 2018]. The package provides essential functionalities for modeling and interpreting spatio-temporal TC rainfall data. pyTCR requires a limited number of model input parameters, making it a convenient and useful tool for analyzing rainfall mechanisms driven by TCs. To sample rare (most intense) rainfall events that are often of great societal interest, pyTCR adapts and leverages outputs from a statistical-dynamical TC downscaling model [Lin et al., 2023] capable of rapidly generating a large number of synthetic TCs given a certain climate. As a result, pyTCR significantly reduces computational effort and improves the efficiency in capturing extreme TC rainfall events at the tail of the distributions from limited datasets. Furthermore, the TC downscaling model is forced entirely by large-scale environmental conditions from reanalysis data or coupled General Circulation Models (GCMs), simplifying the projection of TC-induced rainfall and wind speed under future climate using pyTCR. Finally, pyTCR can be coupled with hydrological and wind models to assess risks associated with independent and compound events (e.g., storm surges and freshwater flooding).

54 ENVIRONMENTAL SCIENCES↗

From Ensemble Climate to Ensemble Impacts

Many climate-risk tools rely on ensemble mean projections or endpoint climate snapshots to characterize future hazards. Although convenient for communication, these representations remove the statistical, temporal, and physical information that real infrastructure systems respond to. Infrastructure degradation and failure arise from extremes, sequences, cumulative stress, compound hazards, and nonlinear fragility relationships, none of which survive ensemble averaging or temporal compression. Power-system failure statistics and cascading failure models further show that infrastructure risk is dominated by tail events and path-dependent dynamics rather than by mean conditions. This paper demonstrates why ensemble mean or endpoint-only climate representations are mathematically and physically inconsistent with engineering-grade risk analysis. We outline a model-resolved, time-series-based workflow that preserves extremes, variability, and sequencing by propagating each climate-model realization independently through hazard formation, exposure, fragility, and cascading failure mechanisms. Taking the ensemble of impacts—rather than the ensemble of climate—provides a defensible, physically coherent foundation for infrastructure resilience planning, regulatory compliance, and long-term investment decisions.

54 - ENVIRONMENTAL SCIENCES/GLOBAL CLIMATE CHANGE ↗

Stochastic Simulation of Daily Suspended Sediment Concentration Using Multivariate Copulas

Estimation of daily suspended sediment concentration (SSC) is required for water resources and environment management. In this paper, a copula-based stochastic method was proposed for daily SSC simulation. Here, the multivariate copula function, constructed based on a bivariate copula and two bivariate conditional probability distributions, was used to model the temporal and cross dependence structures in daily SSCs. Then, the daily SSCs were generated by sampling from the multivariate conditional distribution. As a result, synthetic long-term SSCs data beyond the limited observation period can be provided for water resources managers, which plays a critical role in accurately estimating frequency and magnitude of extreme SSCs events. The proposed method was under rigorous examination by applying to a case study at Pingshan station in the Jinsha River Basin, China. Results showed that the generated daily SSC sequences not only had a high degree of accuracy in preserving the statistical characteristics of the daily SSC observations, but also captured both the temporal correlation and the cross-correlation between the daily streamflow and daily SSC. Specifically, the average daily relative error values corresponding to mean, standard deviation, skewness, lag-1 temporal correlation, and cross correlation were 0.87%, 4.24%, 7.52%, 0.51% and 2.02%, respectively. The multivariate copula framework proposed here can accurately and efficiently generate long-term daily SSC data for water resources management such as frequency analysis and risk assessment of extreme SSC events.

54 ENVIRONMENTAL SCIENCES↗

Extreme Weather Events and PV Systems Impact

The impact of extreme weather events on PV performance was studied by comparing the National Oceanic and Atmospheric Administration database on severe weather with the National Renewable Energy Laboratory's (NREL) PV Fleet database on continuous PV performance. We identified 170 systems that were immediately impacted by weather events. These severe weather events lead to a median loss of only 1 % of annual production. However, flooding and high wind events were found to have an extremely long tail extending to 60 % loss, showing that these discrete events can pose a substantial risk to PV systems. Besides the short-term impact of lost production due to outages, we also found a statistically significant increased performance loss rate (PLR) for high wind events above 90 kilometer/hour, by comparing PLR before and after these events. Similarly, hail events caused higher PLR for hail sizes of and above 25 mm indicating that more stringent hail testing for PV modules is required. In addition, very high snow loads may also cause increased PLRs, but more data are required to better quantify the impact. These findings illustrate the substantial risk extreme weather events pose short-and long-term to fielded PV installations.

extreme weather↗

Extreme Weather Events and the Impact on PV Time Series Data

The impact of extreme weather events on PV performance was studied by comparing the National Oceanic and Atmospheric Administration database on severe weather with the PV Fleet database on continuous PV performance. We identified 170 systems that were immediately impacted by weather events. These severe weather events lead to a median loss of only 1% of annual production. However, flooding and high wind events were found to have an extremely long tail extending to 60 % loss showing that these discrete events can pose a substantial risk to PV systems. Besides the short-term impact of lost production due to outages, we also found a statistically significant increased performance loss rate (PLR) for high wind events comparing PLR before and after these weather events. In addition, hail events caused a higher PLR for 2 out of 3 systems. More data are required to better quantify the impact, but these first results illustrate the substantial risk these events pose short-and long-term.

degradation↗

Object-Based Evaluation of Dynamical and Statistical Downscaled Precipitation Products over CONUS

High-resolution precipitation data, generated through dynamical downscaling (DD) or statistical downscaling (SD) of global climate model output, provide critical information for regional climate assessment and adaptation planning. Most downscaling development and validation have focused on accurate gridscale precipitation construction and ignored the spatial structure of precipitation across model grids and at the event scale. However, many applications, e.g., hydrologic modeling and the analysis using the downscaled precipitation, require a reasonable representation of the spatial structure of precipitation within watersheds. Therefore, a set of standard metrics to evaluate the representation of the spatial structure of individual storms across diverse downscaled precipitation products is desired. To address this need, we conducted an object-based evaluation of precipitation in decades-long DD and SD products over the contiguous United States (CONUS). Specifically, we evaluate their ability to reproduce various features of precipitation objects in the observations: total volume, precipitation area, peak intensity, and spatial structure. Multiple metrics (bias, Perkins score, and nonparametric statistical tests) are used to quantify model performance. Our evaluation reveals notable variations in performance among individual products across different climate zones and seasons, as well as between extreme and nonextreme events. In general, most DD products exhibit balanced performance across the four precipitation object features, while SD products vary more significantly in their performance across products. Based on this comprehensive evaluation, we provide guidance on choosing downscaled products for specific regions, seasons, and precipitation object features. These findings and recommendations can inform precipitation-relevant modeling and analysis over CONUS, guide future downscaling technique developments, and provide actionable information for climate impact assessment and adaptation.

Environmental sciences↗

Classification and computation of extreme events in turbulent combustion

In the design of practical combustion systems, ensuring safety and reliability is an important requirement. For instance, reliably avoiding lean blowout, flame flashback or inlet unstart is critical for ensuring safe operation. Currently, the science of predicting such events is based on prior experience, limited modeling or diagnostic tools and purely statistical approaches. Even though computational and experimental tools for studying combustion devices have vastly advanced in the last three decades, the analysis of such failure events has not been pursued widely. While the use of data for model development and calibration is being widely accepted, the extension to failure events introduces numerous challenges. In particular, the focus here is on so-called data-poor problems, where the cost of generating data is extremely high and is not easily amenable to existing computational and experimental approaches. Data-poor problems are particularly relevant when related to extreme events (also called anomalous events) that can lead to catastrophic failure of the system. It is argued that transient events that describe such failure can have different causal mechanisms. To develop the scientific inference process, a classification of such problems is used to determine specific modeling paths as well as computational tools needed. Research opportunities in the emerging field of extreme event prediction are highlighted in order to identify critical and immediate needs.

97 MATHEMATICS AND COMPUTING↗

Modelling climate analogue regions for a central European city

In this study, we describe a methodology to derive climate analogue cities for spatially highly resolved future climate scenarios. For the computation, a reduced and in hindsight bias-adjusted EURO-CORDEX EUR-11 dataset is used based on two climate scenarios (RCP4.5 and RCP8.5). A total of 389 European cities are processed by the algorithm, which uses five statistical climate variables (2-m air temperature average and amplitude, precipitation sum and amplitude, correlation between 2-m air temperature average and precipitation sum). Additionally, extreme weather events (hot days, summer days, tropical nights, extreme precipitation events) are calculated for further comparison and validation. Finding an appropriate analogue permits a more accurate derivation and depiction of necessary climate adaptation efforts and therefore assist decision-making in city planning. As an example of our method, we searched for plausible climate twins for the mid-sized city of Aachen (Germany) at the end of the twenty-first century. Our results show that the French city of Dijon is highly likely to become Aachen’s climate twin by the end of the century for RCP4.5. As for the scenario RCP8.5, no clear European analogue city could be determined, indicating that the city might enter a novel climate. The nearest match suggests the cities of Florence and Prato in Tuscany. However, considering climate indices, the encompassing region of the French–Spanish city triangle Bordeaux–Toulouse–Bilbao is a better fit. The developed algorithm can be applied to any of the cities included in the dataset.

54 ENVIRONMENTAL SCIENCES↗

Probabilistic Hazard Assessment for Tornadoes, Straight-Line Wind, and Extreme Precipitation at the Savannah River Site

Recent data sets for three meteorological phenomena with the potential to inflict damage on SRS facilities – tornadoes, straight-line winds, and heavy precipitation – are analyzed using appropriate statistical techniques to estimate the occurrence probabilities for these events in the future. Summaries of the results for DOE-mandated return periods and comparisons to similar calculations performed in 2013 by Werth et al. (W2013) are given. Using tornado statistics for i) the combined states of Georgia and South Carolina, and ii) a 2⁰ square area surrounding SRS, we calculated the probability per year of any location at SRS being struck by a tornado (the ‘strike’ probability) and the probability that any point will experience winds above set thresholds. The strike probability was calculated to be 7.04E-4 (1 chance in 1420) per year and tornadic wind speeds for DOE mandated return periods of 50,000 years (corresponding to wind design category 3 (WDC-3), and 125,000 years (meeting WDC-4) (USDOE, 2016) were estimated to be 132 mph and 147 mph, respectively. By contrast, default tornado wind speeds taken from ANSI/ANS-2.3-2011 are somewhat higher: 161 mph for return periods of 50,000 years and 173 mph every 125,000 years (ANS, 2011). Although the ANS and the SRS evaluation used the same basic model (Ramsdell and Rishel, 2007), the region defined in ANS 2.3 that encompasses the SRS also includes areas of the Great Plains and lower Midwest, regions with much higher occurrence frequencies of strong tornadoes. The SRS straight-line wind values associated with various return periods were calculated by fitting existing wind data to a GEV1 distribution and extrapolating the values for any return period from the tail of that function. For the DOE mandated return periods, we expect straight-line winds of 117 mph every 2500 years (the required WDC-3 standard) and 125 mph every 6250 years (WDC-4) at any point within the SRS. These values are similar to those from the ANS-2.3-2011 report, which has wind speeds of 125mph and 133 mph for return periods of 2500 years and 6250 years, respectively. For extreme precipitation, we compared the fits of two different theoretical extreme-value distributions and applied the one that fit the data best for each of several accumulation periods. The DOE mandated 6-hr accumulated rainfall for return periods of 10,000 years (corresponding to precipitation design category 3 (PDC-3) and 25,000 years (PDC-4) were estimated as 9.1 inches and 10.1 inches, respectively. For the 24-hr rainfall return periods of 10,000 years and 25,000 years, total rainfall estimates were 12.02 inches and 13.17 inches, respectively, higher than comparable values provided in the W2013 report.

54 ENVIRONMENTAL SCIENCES↗

Statistical evaluation of microscale stress conditions leading to void nucleation in the weak shock regime

Here, we investigate the heterogeneity of the stress state driven by anisotropic deformation response at the single crystal level through five statistical volume element (SVE) calculations of polycrystalline BCC tantalum. This work focuses on grain boundaries as a prominent material defect type prone to void nucleation based upon experimental observations of predominantly intergranular void nucleation in this material. The SVEs are constructed to be statistically representative of larger volumes of material and are meshed such that mean and standard deviation of grain size and orientation information is reconstructed. The computational meshes feature hexahedral (brick) elements and smooth conformal grain boundaries where significant stress concentration is known to occur, a tail effect of interest in the extreme events process of dynamic ductile damage. An existing micromechanical crystallographic plasticity model shown to capture the single crystal behavior of BCC tantalum well is used to perform the polycrystal calculations. The model includes representation of the non-Schmid effect of non-planar screw dislocation kinetics in tantalum. A three-dimensional stress state time profile predicted by damage modeling of a flyer plate impact experiment is applied as boundary conditions to each SVE. Resulting grain boundary stress state statistics are strongly non-Gaussian. Significant structural evolution is observed within the compressive hold before unloading into tension in the stress profile. Strong angular dependence of grain boundary traction magnitude with shock direction is observed. Non-Schmid effects continue to suggest their influence on propensity of microstructural defect types to nucleate voids. A general void nucleation criterion is proposed using probability theory. The general framework is specified to polycrystalline BCC tantalum in the weak shock regime to include the SVE calculations and literature molecular dynamics calculations of grain boundary void nucleation strength. Probability density functions (PDFs) are used to describe the interaction between the local stress state heterogeneity and the distributed grain boundary void nucleation strength state. A causation entropy maximization procedure removes the requirement for ad hoc selection of a PDF functional form and provides a rigorous procedure for data-based PDF determination. The resulting physically informed PDF describes the spatial appearance frequency of nucleated voids as a function of applied macroscale pressure. Lower length scale physics are thus packaged in a precise and computationally efficient way to provide computational plasticity insight to macroscale dynamic ductile damage models.

36 MATERIALS SCIENCE↗

Quantifying the impact of climate change on erosion - 20397

The New York State Energy Research and Development Authority (NYSERDA) is the owner of the Western New York Nuclear Service Center (WNYNSC), a 1,351-ha (3,338-ac) site located approximately 48 km (30 mi) south of Buffalo, New York. In 1962, Nuclear Fuel Services, Inc. (NFS) entered into Agreements with the Atomic Energy Commission and New York State to construct the first commercial reprocessing plant of nuclear fuel in the United States. NFS, a private company, built and operated the spent fuel reprocessing plant and waste disposal facilities, processing 640 Mg (metric tons, or 705 short tons) of spent nuclear fuel from 1966 to 1972 under an Atomic Energy Commission license. Nuclear fuel reprocessing operations ended in 1972 and never reopened, leaving behind radioactive and chemical wastes. Erosion can play an important role in the fate and transport of waste at sites where disposal of long-lived waste is anticipated. The statistical characterization of key processes related to erosion is essential to the understanding of site stability through time. One of the key processes governing erosion is extreme precipitation and it is critical that trends in the distribution of extreme precipitation events through time be represented. The evidence of climate change is increasingly well documented and projected impacts on extreme precipitation events should be incorporated in performance assessment studies when relevant. Not evaluating future climate states in a performance assessment is contradictory to good modeling practice. Specifically, excluding climate change limits development of modeling information that could aid in effective decision making. The current climate literature provides both observational evidence and climate model projections of climate trends and/or climate change in the late 20. and early 21. centuries for North America and the northeast United States. In this work, this information was used to assess the impacts of potential changes in climate on erosion processes. The goal was to understand how projections of future climate relate to the performance of the WNYNSC through time. In the first stage of this work multi-temporal historical aerial images were analyzed in conjunction with orthophotography and Lidar data to develop probability distributions for variables representing important erosion processes. The information from these analyses was then used in conjunction with simulated data from the West Valley Erosion Working Group (EWG). Analysis of EWG simulations provides estimates for the change in erosion rates through time that is driven by changes in climate. The time-varying rates of erosion change were applied to the historical aerial imagery data in order to inform time-varying rates of erosion that are driven by changes in climate. Ultimately, this process resulted in the identification of locations for features like gully heads using both the Lidar dataset and projection of the estimated location from the historical aerial photo under consideration back to the Lidar dataset. The distance between the estimate of the location from the historical image and that of the Lidar dataset was the estimated distance the feature has moved. This distance was then divided by the number of years between the Lidar dataset and the year of the historical aerial image of interest to get a rate of movement through time. This was done for several dozen points on each historical aerial image. The analyses from the EWG were used to characterize the relative impact of climate change on the erosion rates. This relative impact was quantified by comparing the LEM based estimates of erosion that were derived using historical climate data with LEM based estimates of erosion that were derived using projections of future climate. The relative increase in the erosion rates was then applied to the historical estimates of erosion derived from the analysis of the historical aerial imagery. This approach was used since the LEM-based estimated of the historical erosion rates from the past century have a bias towards underestimating erosion. This underestimation is hypothesized to be a consequence of an inability of the LEMs to account for the impacts of land-use change (i.e. deforestation) which had been shown to significantly increase erosion in similar Northern hardwood forest ecosystems. In summary, gully head retreat rate and gully widening rate were characterized using statistical probability distributions from the historical aerial image analysis. Simulated data from the EWG was used to estimate the climatically-driven changes in erosion rates through time. The changes through time from the EWG were applied to the gully head retreat rate and gully widening rate characterized using the historical aerial image analysis. This information can be used to inform PPA models to project future risks from a given site. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Exacerbated drought impacts on global ecosystems due to structural overshoot

Vegetation dynamics are affected not only by the concurrent climate but also by memory-induced lagged responses. For example, favourable climate in the past could stimulate vegetation growth to surpass the ecosystem carrying capacity, leaving an ecosystem vulnerable to climate stresses. This phenomenon, known as structural overshoot, could potentially contribute to worldwide drought stress and forest mortality but the magnitude of the impact is poorly known due to the dynamic nature of overshoot and complex influencing timescales. Here, we use a dynamic statistical learning approach to identify and characterize ecosystem structural overshoot globally and quantify the associated drought impacts. We find that structural overshoot contributed to around 11% of drought events during 1981-2015 and is often associated with compound extreme drought and heat, causing faster vegetation declines and greater drought impacts compared to non-overshoot related droughts. The fraction of droughts related to overshoot is strongly related to mean annual temperature, with biodiversity, aridity and land cover as secondary factors. These results highlight the large role vegetation dynamics play in drought development and suggest that soil water depletion due to warming-induced future increases in vegetation could cause more frequent and stronger overshoot droughts.

54 ENVIRONMENTAL SCIENCES↗

Strangeness enhancement at its extremes: multiple (multi-)strange hadron production in pp collisions at \(\sqrt{s}=5.02\) TeV

The probability to observe a specific number of strange and multi-strange hadrons (nS), denoted as P(nS), is measured by ALICE at midrapidity (|y| < 0.5) in $$\sqrt{s}=5.02$$ TeV proton-proton (pp) collisions, dividing events into several multiplicity-density classes. Exploiting, for the first time, a technique based on counting the number of strange-particle candidates event-by-event, this measurement allows one to extend the study of strangeness production beyond the mean of the distribution. This constitutes a new test bench for production mechanisms, probing events with a large imbalance between strange and non-strange content. The analysis of a large-statistics data sample makes it possible to extract P(nS) up to a maximum nS of 7 for $${\text{K}}_{\text{S}}^{0}$$, 5 for Λ and $$\overline{\Lambda }$$, 4 for Ξ− and $${\overline{\Xi } }^{+}$$, and 2 for Ω− and $${\overline{\Omega } }^{+}$$. From this, the probability of producing strange hadron multiplets per event is calculated, thereby enabling the extension of the study of strangeness enhancement to extreme situations where several strange quarks hadronize in a single event at midrapidity. Moreover, comparing hadron combinations with different u and d quark compositions and equal overall s quark content, the contribution to the enhancement pattern coming from non-strangeness related mechanisms is isolated. The results are compared with state-of-the-art phenomenological models implemented in commonly used Monte Carlo event generators, including PYTHIA 8 Monash 2013, PYTHIA 8 with QCD-based Color Reconnection and Rope Hadronization (QCD-CR + Ropes), and EPOS LHC, which incorporates both partonic interactions and hydrodynamic evolution. These comparisons show that the new approach dramatically enhances the sensitivity to the different underlying physics mechanisms modeled by each generator.

Abualrob, I J↗