Search NASA⌕ Search

SEARCH · Search NASA

Results for “F STACK”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3

Improved Light Extraction in Organic Light‐Emitting Diodes via Semiconductor Dilution

Increasing the internal light extraction efficiency of organic light‐emitting diodes (OLEDs) is key to improving their performance for solid‐state lighting applications; however, it is challenging to do this in a way that is compatible with high volume manufacturing. Here, it is shown that the outcoupling efficiency of OLEDs can be improved by diluting their hole transport layer (HTL) with the low refractive index material trifluoropropyl oligomeric silsesquioxane (F‐POSS). Specifically, co‐evaporating 40 vol.% F‐POSS in the HTL of single and multi‐stack phosphorescent OLEDs decreases its refractive index by Δ n ≈ 0.2, which in turn yields a ≈12% increase in their outcoupling efficiency with no impact on electrical performance or operational lifetime. This result is significant because F‐POSS is a small molecule that sublimes cleanly, does not aggregate, and is compatible with state‐of‐the‐art HTL materials, making it a realistic path to increase light extraction in commercial OLEDs manufactured on existing production lines.

36 MATERIALS SCIENCE↗

Feasibility Study of Measuring Degree of Linear Polarization of the Solar F-Corona Using Filter Observations on the COronal Diagnostic EXperiment

One of the most unrevealed pieces of information about solar F-corona is its polarization. We propose the possibility of measuring the degree of linear polarization (D F ) of the F-corona along the radial distance from the Sun using the signal of two filters installed on the COronal Diagnostic EXperiment (CODEX), which will be mounted on board the International Space Station in December 2023. By analyzing the signal and noise of CODEX with Monte-Carlo simulations, we can derive D F with a 1.4 nm-width narrow bandpass filter centered at 393.55 nm and a 10 nm-width broad bandpass filter centered at 393.5 nm by stacking six images and integrating over 1R ⊙ × 1R ⊙ . The D F measured by CODEX will help reduce the uncertainty of the K-coronal polarization (pB K ), a main target of the mission, as well as to provide a better understanding of the F-corona.

Solar F corona↗

Understanding Water Transport in Polymer Electrolyte Fuel Cells Using Coupled Continuum and Pore-Network Models

Water management remains a critical issue for polymer electrolyte fuel cell performance and durability, especially at lower temperatures and with ultrathin electrodes. To understand and explain experimental observations better, water transport in gas diffusion layers (GDLs) with macroscopically heterogeneous morphologies was simulated using a novel coupling of continuum and pore-network models. X-ray computed tomography was used to extract GDL material parameters for use in the pore-network model. The simulations were conducted to explain experimental observations associated with stacking of anode GDLs, where stacking of the anode GDLs increased the limiting current density. Through imaging, it is shown that the stacked anode GDL exhibited an interfacial region of high porosity. The coupled model shows that this morphology allowed more efficient water movement through the anode and higher temperatures at the cathode compared to the single GDL case. As a result, the cathode exhibited less flooding and hence better low temperature performance with the stacked anode GDL.

30 DIRECT ENERGY CONVERSION↗

Sensitivity of resonance properties of all-dielectric multilayers driven by statistical fluctuations

In photonics and emerging fields of quantum and topological materials, increasing demands are placed upon the state and control of electromagnetic fields. Dielectric multilayer materials may be designed and optimized to possess extremely sharp spectral and angular photonic resonances allowing for the creation of fields orders of magnitude larger than the exciting field. With enhancements of 10 4 and higher, the extreme nature of these resonances places high constraints on the statistical properties of the physical and optical characteristics of the materials. To what extent the spectral and angular shifts occur as a result of fluctuations in the refractive indices and morphologies of the involved low-loss subdomains have not been considered previously. Here, we present how parameter variations such as those caused by fluctuations in deposition rate, yielding bias, random and compensated errors, may affect the resonance properties of low-loss all-dielectric stacks.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

The x ray properties of a large, uniform QSO sample: Einstein observations of the LBQS

Although there are large numbers of Quasi Stellar Objects (QSO's) now observed in X rays, extensive X-ray observations of uniformly selected, 'complete' QSO samples are more rare. The Large Bright QSO Survey (LBQS) consists of about 1000 objects with well understood properties, most brighter than B = 18.8 and thus amenable to X-ray detections in relatively brief exposures. The sample is thought to be highly complete in the range 0.2 less than z less than 3.3, a significantly broader interval than many other surveys. The Einstein IPC observed 150 of these objects, mostly serendipitously, during its lifetime. We report the results of an analysis of these IPC data, considering not only the 20 percent of the objects we find to have positive X-ray detections, but also the ensemble X-ray properties derived by 'image stacking'.

Margon, B.↗

Synthesis and structure of synthetically pure and deuterated amorphous (basic) calcium carbonates

It is generally believed that H 2 O and OH - are the key species stabilizing and controlling amorphous calcium carbonate “polyamorph” forms, and may in turn control the ultimate crystallization products during synthesis and in natural systems. Yet, the locations and hydrogen-bonding network of these species in ACC have never been measured directly using neutron diffraction. In this paper, we report a synthesis route that overcomes the existing challenges with respect to yield quantities and deuteration, both of which are critically necessary for high quality neutron studies.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Outside the Lyman-break box: detecting Lyman continuum emitters at 3.5 < z < 5.1 with CLAUDS

ABSTRACT Identifying non-contaminated sample of high-redshift galaxies with escaping Lyman continuum (LyC) flux is important for understanding the sources and evolution of cosmic reionization. We present CLAUDS (CFHT Large Area u-band deep survey) u-band photometry of the COSMOS field to probe LyC radiation from spectroscopically confirmed galaxies at $z$ ≥ 3.5 and outside the standard Lyman-break galaxy colour-selection expectations. Complementary to the CLAUDS data, we use Subaru multifilter photometry, Hubble Space Telescope (HST) multifilter imaging, and the spectroscopic surveys D10K, VUDS, and 3D-HST. We present a sample of Lyman continuum galaxy (LCG) candidates in the redshift range 3.5 ≲ $z$ ≲ 5.1. Here, we introduce 5 LCG candidates, where two are flagged quality 1 and three quality 2. The estimated $f_{\rm esc}^{\rm abs}$ for quality 1 candidates are in the range $\sim 5 - 73{{\ \rm per\ cent}}$ and $\sim 30 - 93{{\ \rm per\ cent}}$. These estimates are based on our derived parameters from individual galaxies as inputs to a range of BPASS models as well as mean intergalactic medium (IGM) and maximal intergalactic and circumgalactic media (IGM+CGM) transmission. We conclude that our search for LCGs is most likely biased to lines of sight with low H i densities or free from Lyman limit systems. Our two best LCG candidates have EW (Lyα) ≤ 50 Å and we find no correlation or anticorrelation between EW (Lyα), $f_{\rm esc}^{\rm abs}$, and Robs, the ratio of ionizing to non-ionizing observed flux in the measured passbands. Stacking candidates without solid LyC detections (S/N < 3) results in an estimated $f_{\rm esc}^{\rm abs}$ from galaxies not greater than $1{{\ \rm per\ cent}}$.

Meštrić, U.↗

Tests of N-85, N-86 and N-87 airfoil sections in the 11-inch high speed wind tunnel

Three airfoils, the N-85, the N-86, and the N-87, were tested at the request of the Bureau of Aeronautics, Navy Department, to determine the suitability of these sections for use as propeller-blade sections. Further tests of the NACA 0009-64 airfoil were also made to measure the aerodynamic effect of thickening the trailing edge in accordance with current propeller practice. The N-86 and the N-87 airfoils appear to be nearly equivalent aerodynamically and both are superior to the N-85 airfoil. Comparison of those airfoils with the previously developed NACA 2409-34 airfoils indicate that the NACA 2409-34 is superior, particularly at high speeds. Thickening the trailing edge appears to have a detrimental effect, although the effect may be small if the trailing-edge radius is less than 0.5 percent of the cord. The N-86 and the N-87 airfoils appear to be nearly equivalent.

Stack, John↗

The Compressibility Burble and the Effect of Compressibility on Pressures and Forces Acting on a Airfoil

Simultaneous air-flow photographs and pressure-distribution measurements were made of the NACA 4412 airfoil at high speeds to determine the physical nature of the compressibility burble. The tests were conducted in the NACA 24-inch high-speed wind tunnel. The flow photographs were obtained by the Schlieren method and the pressures were simultaneously measured for 54 stations in the 5-inch-chord airfoil by means of a multiple-tube manometer. Following the general program, a few measurements of total-pressure loss in the wake of the airfoil at high speeds were made to illustrate the magnitude of the losses involved and the extent of the disturbed region; and, finally, in order to relate this work to earlier force-test data, a force test of a 5-inch-chord NACA 4412 airfoil was made. The results show the general nature of the phenomenon known as the compressibility burble. The source of the increased drag is shown to be a compression shock that occurs on the airfoil as its speed approaches the speed of sound. Finally, it is indicated that considerable experimentation is needed in order to understand the phenomenon completely.

Stack, John↗

Characteristics of Low-Aspect-Ratio Wings at Supercritical Mach Numbers

The separation of the flow over wings precipitated by the compression shock that forms as speeds are increased into the supercritical Mach number range has imposed serious difficulties in the improvement of aircraft performance. Three difficulties rise principally as a consequence of the rapid drag rise and the loss of lift that causes serious stability changes when the wing shock-stalls. Favorable relieving effects due to the three-dimensional flow around the tips were obtained and these effects were of such magnitude that it is indicated that low-aspect-ratio wings offer a possible solution of the problems encountered.

Stack, John↗

Topographic Trends of the Geologic Units in Jezero Crater: Lake Levels, Potential Shorelines, and the Crater Floor Units

The Mars2020 Perseverance rover continues to explore the crater floor of Jezero crater working to understand the origins of these different crater floor geological units. Here, we model and analyze the modern and paleo-topography of various facets of Jezero crater to better constrain the evolution and origins of the various units and features observed. In general, we find that that a) the evidences for lake levels are largely unconstrained and are primarily supported by the outflow channel, western delta, and Kodiak, b) so far no convincing evidence has been found for continuous lake terraces (i.e., shorelines), and c) the contact surface of the lobate Crater Floor Fractured Rough (Cf-fr)unit dips to the southeast.

S F Sholes↗

Manufacturing Challenges and Benefits when Scaling the HIAD Stacked-Torus Aeroshell to a 15m Class System

Over a decade of work has been conducted in the development of NASA's Hypersonic Inflatable Aerodynamic Decelerator (HIAD) deployable aeroshell technology. This effort has included multiple ground test campaigns and flight tests culminating in the HIAD project's second generation (Gen-2) aeroshell system. The HIAD project team has developed, fabricated, and tested stacked-torus inflatable structures (IS) with flexible thermal protection systems (F-TPS) ranging in diameters from 3-6m, with cone angles of 60 and 70 deg. To meet NASA and commercial near term objectives, the HIAD team must scale the current technology up to 12-15m in diameter. The HIAD project's experience in scaling the technology has reached a critical juncture. Growing from a 6m to a 15m class system will introduce many new structural and logistical challenges to an already complicated manufacturing process. Although the general architecture and key aspects of the HIAD design scale well to larger vehicles, details of the technology will need to be reevaluated and possibly redesigned for use in a 15m-class HIAD system. These include: layout and size of the structural webbing that transfers load throughout the IS, inflatable gas barrier design, torus diameter and braid construction, internal pressure and inflation line routing, adhesives used for coating and bonding, and F-TPS gore design and seam fabrication. The logistics of fabricating and testing the IS and the F-TPS also become more challenging with increased scale. Compared to the 6m aeroshell (the largest HIAD built to date), a 12m aeroshell has four times the cross-sectional area, and a 15m one has over six times the area. This means that fabrication and test procedures will need to be reexamined to account for the sheer size and weight of the aeroshell components. This will affect a variety of steps in the manufacturing process, such as: stacking the tori during assembly, stitching the structural webbing, initial inflation of tori, and stitching of F-TPS gores. Additionally, new approaches and hardware will be required for handling and ground testing of both individual tori and the fully assembled HIADs. There are also noteworthy benefits of scaling up the HIAD aeroshell to 15m-class system. Two complications in working with handmade textiles structures are the non-linearity of the materials and the role of human accuracy during fabrication. Larger, more capable, HIAD structures should see much larger operational loads, potentially bringing the structural response of the materials out of the non-linear regime and into the preferred linear response range. Also, making the reasonable assumption that the magnitude of fabrication accuracy remains constant as the structures grow, the relative effect of fabrication errors should decrease as a percentage of the textile component size. Combined, these two effects improve the predictive capability and the uniformity of the structural response for a 12-15m class HIAD. In this paper, the challenges and associated mitigation plans related to scaling up the HIAD stacked-torus aeroshell to a 15m class system will be discussed. In addition, the benefits of enlarging the structure will be further explored.

Decellerators↗