Search NASA⌕ Search

SEARCH · Search NASA

Results for “FERRIMAGNETIC MATERIALS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3

Magnetic Studies of Mutiferroic Bi{sub 1-x}La{sub x}FeO{sub 3} Ceramics Synthesized By Solution Combustion Technique

Bi{sub 1-x}La{sub x}FeO{sub 3} (x = 0.0, 0.05, 0.10, 0.15) ceramic samples were prepared by solution combustion technique. X-ray diffraction patterns confirmed the formation of perovskite structured Bi{sub 1-x}La{sub x}FeO{sub 3} phase. Saturation magnetization (M{sub s}) increases with increasing La concentration from x = 0.0 to x = 0.15. Weak ferromagnetism is observed at room temperature in all the doped and undoped BFO samples. Mossbauer spectroscopy confirmed the presence of single-phase material for the doped compositions. Improvement in magnetic behavior appears to arise from a combination of the propensity of the samples to form pure phase material, partial destruction of spin cycloids and increased canting of spins.

36 MATERIALS SCIENCE↗

Physical Property of Magnesium Doped Barium Hexaferrite Particles By Citrate Precursor Route In Presence Of Surfactants

M-type Barium Magnesium hexaferrite with the composition BaMg{sub 2}Fe{sub 10}O{sub 19} was successfully prepared with and without surfactant by using a citrate precursor route. The obtained precursors were calcined at various temperatures. The crystalline structure, phase analysis and particle size were investigated by using X-ray diffraction (XRD), Fourier Transform infrared spectroscopy (FTIR), Scanning Electron Microscopy (SEM) techniques. It is observed that the surfactant addition controls the microstructure of the formed Barium Magnesium hexaferrite particles and the type of surfactant plays a crucial role in deciding the morphology of particles.

36 MATERIALS SCIENCE↗

Growth rate induced monoclinic to tetragonal phase transition in epitaxial BiFeO{sub 3} (001) thin films

Epitaxial BiFeO{sub 3} thin films were deposited on SrRuO{sub 3} buffered SrTiO{sub 3} (001) substrates at different growth rates by varying the radio frequency sputtering power. With increasing growth rate, the crystal structure of BiFeO{sub 3} films develops from monoclinic lattice to a mixture phase of tetragonal lattice T{sub 1} with c/a{approx}1.05 and giant tetragonal lattice T{sub 2} with c/a{approx}1.23, finally to a single tetragonal phase T{sub 2}, as shown by high resolution synchrotron x-ray diffraction reciprocal space mappings. The observed phase transitions, induced by film growth rate, offer an alternative strategy to manipulate crystalline phases in epitaxial ferroelectric thin films.

36 MATERIALS SCIENCE↗

Functional properties of BaTiO{sub 3}-Ni{sub 0.5}Zn{sub 0.5}Fe{sub 2}O{sub 4} magnetoelectric ceramics prepared from powders with core-shell structure

In the present work, diphasic ceramic composites with core-shell nanostructures formed by Ni{sub 0.50}Zn{sub 0.50}Fe{sub 2}O{sub 4} core and BaTiO{sub 3} shell were investigated. Their properties were compared with those of composites prepared by coprecipitation. The core-shell structure was confirmed by microstructural powder analysis. Homogeneous microstructures with a good phase mixing and percolated dielectric phase by the magnetic one were obtained from coprecipitated powders. Less homogeneous microstructures resulted in ceramics produced from the powder prepared by core-shell method, with isolated small ferrite grains besides large ferrite aggregates embedded into the BaTiO{sub 3} matrix. Both the ferroelectric and magnetic phases preserve their basic properties in bulk composite form. However, important differences in the dielectric relaxation and conduction mechanisms were found as result of the microstructural difference. Extrinsic contributions play important roles in modifying the electric properties in both ceramics, causing space charge effect, Maxwell-Wagner relaxations and hopping conductivity, mainly due to the ferrite low resistivity phase. The conductivity and dielectric modulus spectra analysis allowed to identify different polaron contributions associated with the microstructural differences. It results that by using the core-shell method, improved dielectric properties and limited hopping contributions can be realized.

36 MATERIALS SCIENCE↗

Processing and Switching Behavior of Multiferroic (Bi{sub 0.7}Dy{sub 0.3}FeO{sub 3}) Microstructure Arrays

Multiferroic systems, which exhibit coexistence of both ferroelectric and ferromagnetic ordering at room temperature, are of great importance for a variety of device applications. Due to coupling between the two order parameters, it is possible to bring polarization in the multiferroic systems by either means (applying electric or magnetic field). We have been successful in developing material (Bi{sub 0.7}Dy{sub 0.3}FeO{sub 3}) which exhibits the multiferroic behavior at room temperature with significant coupling in bulk as well as thin films. We therefore propose to develop a procedure to fabricate multiple memory devices using this new compound.

36 MATERIALS SCIENCE↗

A large polarization in Ce-modified bismuth ferrite thin films

Bi{sub 0.95}Ce{sub 0.05}FeO{sub 3} (BCFO) thin films were grown on SrRuO{sub 3}/TiO{sub 2}/SiO{sub 2}/Si(100) substrates via radio frequency sputtering. The BCFO thin film has a (111) orientation with a high phase purity. Improved dielectric behavior is observed for the BCFO thin film as compared with that of pure bismuth ferrite thin film. A large remanent polarization of 2P{sub r} {approx} 183.9 {mu}C/cm{sup 2} is induced in the BCFO thin film, owing to the (111) orientation and the introduction of Ce. The local phase decomposition induced by larger depolarization fields and the oxygen vacancies dominates the fatigue resistance of the BCFO thin film.

36 MATERIALS SCIENCE↗

Preparation of magnetic CoFe{sub 2}O{sub 4}-functionalized graphene sheets via a facile hydrothermal method and their adsorption properties

Magnetic CoFe{sub 2}O{sub 4}-functionalized graphene sheets (CoFe{sub 2}O{sub 4}-FGS) nanocomposites have been synthesized by hydrothermal treatment of inorganic salts and thermal exfoliated graphene sheets. Scanning electron microscopy (SEM) and transmission electron microscopy (TEM) observations show that cobalt ferrite nanoparticles with sizes of 10-40 nm are well dispersed on graphene sheets. OH{sup -} was recognized as a tie to integrate the inorganic salts with the graphene sheets, which made reaction started and developed on the surface of graphene sheets and formed cobalt ferrite nanoparticles on graphene sheets. The adsorption kinetics investigation revealed that the adsorption of methyl orange from aqueous solution over the as-prepared CoFe{sub 2}O{sub 4}-FGS nanocomposites followed pseudo-second-order kinetic model and the adsorption capacity was examined as high as 71.54 mg g{sup -1}. The combination of the superior adsorption of FGS and the magnetic properties of CoFe{sub 2}O{sub 4} nanoparticles can be used as a powerful separation tool to deal with water pollution. -- Graphical abstract: OH{sup -} was recognized as a tie to integrate the inorganic salts with the graphene sheets, which made reaction started and developed on the surface of graphene sheets and formed cobalt ferrite nanoparticles on graphene sheets. Display Omitted Research highlights: {yields} CoFe{sub 2}O{sub 4}-FGS have been prepared via a facile hydrothermal method. {yields} CoFe{sub 2}O{sub 4} nanoparticles with sizes of 10-40 nm are well dispersed on graphene sheets. {yields} CoFe{sub 2}O{sub 4}-FGS with superior adsorption can be used for water treatment.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Seed-mediated synthesis, properties and application of {gamma}-Fe{sub 2}O{sub 3}-CdSe magnetic quantum dots

Seed-mediated growth of fluorescent CdSe quantum dots (QDs) around {gamma}-Fe{sub 2}O{sub 3} magnetic cores was performed at high temperature (300 deg. C) in the presence of organic surfactants. Bi-functional magnetic quantum dots (MQDs) with tunable emission properties were successfully prepared. The as-synthesized MQDs were characterized by high-resolution transmission electron microscopy (HRTEM) and dynamic light scattering (DLS), which confirmed the assembly of heterodimers. When a longer growth period was employed, a homogeneous dispersion of QDs around a magnetic nanoparticle was obtained. The magnetic properties of these nanocomposites were examined. The MQDs were superparamagnetic with a saturation magnetization of 0.40 emu/g and a coercivity of 138 Oe at 5 K. To demonstrate their potential application in bio-labeling, these MQDs were coated with a thin silica shell, and functionalized with a polyethylene glycol (PEG) derivative. The functionalized MQDs were effectively used for the labeling of live cell membranes of 4T1 mouse breast cancer cells and HepG2 human liver cancer cells. - Graphical abstract: (a) HRTEM image of oleic acid capped MPs. The size of MPs ranges from 8 to 10 nm. (b) XRD pattern of {gamma}-Fe{sub 2}O{sub 3} MPs. Highlights: > The fabrication of MQDs through a seed-mediated approach has been demonstrated. > The formation and assembly of these bi-functional nanocomposites have been elucidated. > The MQDs exhibit superparamagnetism and tunable emissions characteristic of the components. > MQDs with thin silica coating were successfully employed in the labeling of cancer cell membranes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Structural behavior and thermoelectric properties of the brownmillerite system Ca{sub 2}(Zn{sub x}Fe{sub 2-x})O{sub 5}

The Ca{sub 2}(Zn{sub x}Fe{sub 2-x})O{sub 5} series was synthesized and characterized to determine the influence of zinc dopant on the brownmillerite structure for thermoelectric applications. All single-phase compounds exhibited Pnma symmetry at room temperature up to the solubility limit at x=0.10. High-temperature X-ray powder diffraction was used to show that the nature of the Pnma-Imma(0 0 {gamma})s00 transition in Ca{sub 2}Fe{sub 2}O{sub 5} is modified by the presence of zinc. While the Zn-free composition transitions to an incommensurate phase, the Zn-containing phases transition instead to a commensurate phase, Imma(0 0 {gamma})s00 with {gamma}=1/2. Both the Neel temperature and the onset temperature of the Pnma-Imma(0 0 {gamma})s00 phase transition decreased with increasing zinc concentration. Rietveld analysis of the in situ diffraction pattern for the x=0 sample at 1300 deg. C demonstrates that the structure contains statistically disordered chain orientations as described by space group Imma. Thermoelectric properties were analyzed in air from 100 to 800 deg. C. The positive Seebeck coefficient revealed hole-type conduction for all compositions. Doped samples exhibited electrical conductivities up to 3.4 S/cm and thermal conductivity of 1.5 W/mK. Transport analysis revealed thermally activated mobility consistent with polaron conduction behavior for all compositions. - Graphical Abstract: Preferential substitution by zinc for iron at the tetrahedral sites of brownmillerite dicalcium ferrite modifies the high temperature Imma(0 0 {gamma})s00 phase from incommensurate to commensurate. Highlights: > Preferential tetrahedral occupancy by zinc in brownmillerite dicalcium ferrite. > Ca{sub 2}Fe{sub 2}O{sub 5} exhibits two additional phase transitions above 1000 deg. C: a commensurately modulated Imma(0 0 {gamma})s00 phase and a statistically disordered Imma phase. > Thermal hysteresis in phase transition increased with increasing zinc. > Electrical conductivity up to 3.4 S/cm at 800 deg. C.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Influence of annealing atmosphere on the magnetic properties of SiO{sub 2}/Fe/SiO{sub 2} sandwiched nanocomposite films

The magnetic properties of SiO{sub 2}/Fe/SiO{sub 2} nanocomposite films are studied by magnetic force microscopy and vibrating sample magnetometer. The films were fabricated by alternately depositing SiO{sub 2}, Fe, and SiO{sub 2} on Si substrates with magnetron sputtering followed by thermal annealing. It is found that the annealing atmosphere significantly influences the sample structure, composition, and magnetic properties. The samples annealed in forming gas show much better magnetic properties than those annealed in vacuum and in N{sub 2}. The saturation magnetization can reach 200 emu/g, fairly close to the value of bulk Fe, and the coercivity can reach 400 Oe, much higher than 10 Oe of the bulk Fe. X-ray photoelectron spectroscopic depth profile measurement was carried out to study the mechanism of the strong influence of annealing atmosphere. For the samples annealed in forming gas, Fe nanoparticles are mildly oxidized, forming thin shells of Fe{sub 2}O{sub 3} surrounding them, which is beneficial for maintaining the ferromagnetic behavior and enhancing the coercivity of nanoparticles.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Effect of B{sub 2}O{sub 3}-Bi{sub 2}O{sub 3}-SiO{sub 2}-ZnO glass on the dielectric and magnetic properties of ferroelectric/ferromagnetic composite for low temperature cofired ceramic technology

Ni-Cu-Zn ferrite/BaTiO{sub 3} composites with different additive amounts of B{sub 2}O{sub 3}-Bi{sub 2}O{sub 3}-SiO{sub 2}-ZnO (BBSZ) glass have been prepared by a conventional solid-reaction method and sintered at 900 deg. C to adapt to low temperature cofired ceramic (LTCC) technology. The dielectric and magnetic properties of the composites can be effectively improved with increasing BBSZ content. Here, the BBSZ glass mainly plays two roles, one is as a sintering aid promoting grain growth and the other is as a low permittivity phase or nonmagnetic phase leading to dilution effect on the dielectric or magnetic properties of the composites. The effect degree of above two roles is related to the variation in BBSZ content and has been discussed combining with the effective medium theory. The lower and upper bounds for the effective permittivity and permeability have been given by the Maxwell-Garnett rules.

36 MATERIALS SCIENCE↗

Improved photoelectrochemical responses of Si and Ti codoped alpha-Fe{sub 2}O{sub 3} photoanode films

We studied photoelectrochemical performance of the undoped, Si-doped, Ti-doped, and codoped alpha-Fe{sub 2}O{sub 3} film prepared by ultrasonic spray pyrolysis. Since the ions radius of Si{sup 4+}<Fe{sup 3+}<Ti{sup 4+}, Si and Ti codoping can balance the ion radius difference between Fe{sup 3+} and Si{sup 4+} (or Ti{sup 4+}) and increase the donor concentration. Their donor concentrations, calculated from slopes of the Mott-Schottky plots, are 9.10x10{sup 18} cm{sup -3}, 1.89x10{sup 20} cm{sup -3}, 2.04x10{sup 20} cm{sup -3}, and 7.06x10{sup 20} cm{sup -3}, respectively. Incident photon to current efficiency of the codoped film is 34% at 365 nm and 0.6 V versus Ag/AgCl, much higher than 10%, 20%, and 22% for the undoped, Si-doped, and Ti-doped film, respectively.

36 MATERIALS SCIENCE↗

Dielectric, magnetic, and lattice dynamics properties of Y-type hexaferrite Ba{sub 0.5}Sr{sub 1.5}Zn{sub 2}Fe{sub 12}O{sub 22}: Comparison of ceramics and single crystals

We prepared multiferroic Y-type hexaferrite Ba{sub 0.5}Sr{sub 1.5}Zn{sub 2}Fe{sub 12}O{sub 22} ceramics and compared their magnetic and dielectric properties with single crystal. Magnetic susceptibility and microwave resonance measurement revealed magnetic phase transition at T{sub C}=312 K, similar as in single crystal. Ferroelectric (FE) phase can be induced by external magnetic field in all investigated samples and the phase diagram in ceramics qualitatively resembles that of the single crystal. The range of magnetic fields, where the FE phase is induced, broadens after annealing of single crystal. Ceramics quenched after sintering exhibit several orders of magnitude lower conductivity than the single crystal. Heavily damped magnetic resonance was discovered in terahertz spectra at 10 K and its frequency softens below 5 GHz near T{sub C}. Number and symmetry of observed infrared (IR) and Raman active phonons correspond to paraelectric phase with D{sub 3d}{sup 5} hexagonal structure. No evidence for a structural phase transition was found in the IR and Raman spectra on cooling (in zero magnetic field) or in the room-temperature IR spectra with external static magnetic field up to 0.3 T.

36 MATERIALS SCIENCE↗

In-situ lattice-strain analysis of a ferroelectric thin film under an applied pulse electric field

We developed an in-situ measurement system for characterizing the relationship between ferroelectricity and lattice distortion of a ferroelectric thin film at BL13XU, SPring-8. The dielectric polarization obtained and the lattice strain evaluated provide us with the electrostrictive coefficient of the film. The system for the method consists of a refractive lens for two dimensional micron focusing, ferroelectric characterization system, high-precision four-circle diffractometer, and time-resolved photon counting system. It enables in-situ measurements of the electric polarization of the film and an electric-field-induced strain using nano-second order time-resolved synchrotron diffraction. We applied the method to determining the lattice constant distorted by the electric field and the polarization value of a 410 nm-thick BiFeO{sub 3} thin film. The piezoelectric constant d{sub 33} evaluated was about 28 pm/V. The polarization observed allowed us to evaluate an electrostrictive coefficient Q of 1{center_dot}4x10{sup -2} m{sup 4}/C{sup 2}.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Combined effects of bilayer structure and ion substitutions on bismuth ferrite thin films

To understanding the combined effects of bilayer structure and ion substitutions on electrical behavior of BiFeO{sub 3} thin films, the Bi{sub 0.90}La{sub 0.10}Fe{sub 0.90}Zn{sub 0.10}O{sub 3}/Bi{sub 0.90}La{sub 0.10}Fe{sub 0.90}Sn{sub 0.10}O{sub 3} bilayers with different thickness ratios were fabricated on SrRuO{sub 3}/Pt/TiO{sub 2}/SiO{sub 2}/Si(100) substrates by radio frequency sputtering. Their dielectric constant increases and the fatigue endurance becomes better with increasing Bi{sub 0.90}La{sub 0.10}Fe{sub 0.90}Zn{sub 0.10}O{sub 3} thickness ratios. The bilayer with the thickness ratio of 210: 90 exhibits a high remanent polarization, and a better fatigue behavior is induced by higher driving electric fields and frequencies.

36 MATERIALS SCIENCE↗

Electromagnetic properties of microwave sintered ferromagnetic-ferroelectric composites for application in low temperature co-fired ceramic devices

In this paper, microwave sintering (MS) technology has been applied in the preparation of ferromagnetic-ferroelectric composites. Several kinds of (Ni{sub 0.3}Zn{sub 0.6}Cu{sub 0.1})Fe{sub 2}O{sub 4} (NiCuZn) ferrite with different contents of BaTiO{sub 3}(BT) have been fabricated by MS technology. We found that the sintering time and temperature were significantly reduced from 22 h and 1100 deg. C for the conventional sintering (CS) process to 2 h and 840 deg. C for MS process, respectively. Experiments show that MS treated NiCuZn-BT composites possess both excellent ferromagnetic and ferroelectric properties. For the composites of NiCuZn added with 15% BaTiO{sub 3}, the real part of permittivity is larger than 50 below 20 MHz and the real part of dielectric constant is larger than 18 below 1 GHz. Our results indicate that the microwave sintering method is a potential important technique in LTCC technology.

36 MATERIALS SCIENCE↗

Valence-driven electrical behavior of manganese-modified bismuth ferrite thin films

BiFe{sub 0.95}R{sub 0.05}O{sub 3} (Mn{sup 2+}, Mn{sup 3+}, and Mn{sup 4+}) thin films with (110) orientation were fabricated on SrRuO{sub 3}/Pt/TiO{sub 2}/SiO{sub 2}/Si(100) substrates via rf sputtering. With the increasing valence of Mn in BiFe{sub 0.95}R{sub 0.05}O{sub 3}, the concentration of Fe{sup 2+} increases, whereas the concentration of oxygen vacancies decreases. The electrical properties of BiFe{sub 0.95}R{sub 0.05}O{sub 3} are correlated with the valence of Mn. Their leakage current density is dependent on the concentration of oxygen vacancies caused by different valences of Mn. Their P-E loops become better with the increasing valence of Mn owing to a lower leakage current density in high electric field regions, and a large remanent polarization of 2P{sub r} {approx} 145.2 {mu}C/cm{sup 2} is obtained for the Mn{sup 4+}-doped film. For the Mn{sup 2+}-doped bismuth ferrite film, the space-charge-limited conduction and Schottky barrier dominate its leakage behavior under a negative electric field, the Ohmic conduction and Schottky barrier are involved in the leakage behavior under a positive electric field, and the interface-limited Fowler-Nordheim tunneling is their dominant mechanism in a high electric field region. In contrast, an Ohmic conduction dominates the leakage behavior of Mn{sup 3+}- and Mn{sup 4+}-doped films regardless of negative and positive directions or measurement temperatures.

36 MATERIALS SCIENCE↗

High-frequency magnetic properties of Zn ferrite films deposited by magnetron sputtering

The effect of thermal annealing on structural and magnetic properties has been investigated for Zn ferrite films deposited on Si (111) substrates using radio frequency magnetron sputtering. The saturation magnetization at room temperature was enhanced upto 303 emu/cm{sup 3} by annealing at relatively low temperature of 200 deg. C and decreased at higher temperatures. The complex permeability {mu}={mu}{sup '}-i{mu}{sup ''} values of the ferrite films as-deposited and annealed at 200 and 400 deg. C were measured at frequency upto 5 GHz. These films exhibited better high-frequency properties, especially, the film annealed at 200 deg. C had a large {mu}{sup '} of 19.5 and high resonance frequency f{sub r} of 1.61 GHz. And the reason was investigated preliminarily based on the bianisotropy model.

36 MATERIALS SCIENCE↗