Search NASA⌕ Search

SEARCH · Search NASA

Results for “FOSSIL FUEL”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Microwave-assisted dehydrogenation of fossil fuels using iron-based alumina nanocomposites

Hydrogen is mainly produced via steam reforming of methane and gasification of coal, with enormous CO 2 emissions in both cases. Microwave-assisted thermocatalytic decomposition (pyrolysis) is of interest as a method for hydrogen production from fossil fuels with no CO 2 emissions. For successful implementation of this technology, it is necessary to develop decomposition catalysts that are also good microwave absorbers and can be produced from inexpensive materials via a robust synthetic route. Recently, iron-based alumina nanocomposites, fabricated by solution combustion synthesis (SCS), have shown promising microwave-absorbing and catalytic properties in the pyrolysis of plastics. The reported project explored the feasibilities of improving such catalysts and using them for the microwave-assisted pyrolysis of liquid fossil fuels, viz., diesel fuel, gasoline, and crude oil. The research focused on how SCS parameters affect the material properties and pyrolysis performance.

02 PETROLEUM↗
DOE OSTI2015

Annual Fossil-Fuel CO2 Emissions: Mass of Emissions Gridded by One Degree Latitude by One Degree Longitude (NDP-058.2015)

The 2015 version of this database presents a time series recording 1° latitude by 1° longitude CO2 emissions in units of million metric tons of carbon per year from anthropogenic sources for 1751-2011. Detailed geographic information on CO2 emissions can be critical in understanding the pattern of the atmospheric and biospheric response to these emissions. Global, regional, and national annual estimates for 1751 through 2011 were published earlier (Boden et al. 2015). Those national, annual CO2 emission estimates were based on statistics about fossil-fuel burning, cement manufacturing and gas flaring in oil fields as well as energy production, consumption, and trade data, using the methods of Marland and Rotty (1984). The national annual estimates were combined with gridded 1° data on political units and 1984 human populations to create the new gridded CO2 emission time series. The same population distribution was used for each of the years as proxy for the emission distribution within each country. The implied assumption for that procedure was that per capita energy use and fuel mixes are uniform over a political unit. The consequence of this first-order procedure is that the spatial changes observed over time are solely due to changes in national energy consumption and nation-based fuel mix. Increases in fossil-fuel CO2 emissions over time are apparent for most areas.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2015

Annual Fossil-Fuel CO2 Emissions: Global Stable Carbon Isotope Signature

This database contains estimates of the annual mean global value of delta 13C of CO2 emissions from fossil-fuel consumption and cement manufacture for 1751-2014. These estimates of the carbon isotopic signature account for the changing mix of coal, petroleum, and natural gas being consumed and for the changing mix of petroleum from various producing areas with characteristic isotopic signatures. This time series of fossil-fuel delta 13C signature provides an additional constraint for balancing the sources and sinks of the global carbon cycle and complements the atmospheric delta 13C measurements that are used to partition the uptake of fossil carbon emissions among the ocean, atmosphere, and terrestrial biosphere reservoirs.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

Single-column cryogenic air separation: enabling efficient oxygen production with rapid startup and low capital costs—application to low-carbon fossil-fuel plants

The rapid integration of intermittent renewable sources into the electricity grid is driving the need for more flexible, low-carbon fossil-fuel plants with lower capital costs. This then drives the need to improve the cryogenic air separation unit (ASU). To address this changing landscape, we explore a Praxair single-column ASU (PSC-ASU) design with the goal of reducing costs and improving flexibility, compared to a conventional double-column ASU. The PSC-ASU incorporates partial air condensation and air pre-separation in the bottom reboiler with a phase separator as well as N2-enriched vapor condensation in the upper reboiler to decrease energy consumption, as compared to Linde's single-column ASU. All three of the above-mentioned ASU designs are simulated in Aspen Plus and analyzed. An economic analysis is applied to evaluate the relative cost savings of the PSC-ASU compared to the double-column ASU. Results suggest that the specific energy consumption of the PSC-ASU is significantly lower than that of Linde's single-column ASU due to a drastically improved oxygen recovery rate. Although this improved oxygen recovery rate is still lower than that of the double-column ASU, the required pressure ratio of the main air compressor is 21% lower than that of the double-column ASU. As a result, the specific energy consumption of the PSC-ASU is only 1.9% greater than that of the double-column ASU for producing 95.1 mol% O2. However, the PSC-ASU reduces the hourly capital cost by 19% due to the elimination of a high-pressure column. This would effectively decrease the total hourly cost of the ASU, and thus the total hourly cost of low-carbon, fossil-fuel power plants that require oxygen.

Cheng, Mao↗
DOE OSTI2022

Low-Cost Sulfur Thermal Storage for Increased Flexibility and Improved Economics of Fossil-Fueled Electricity Generating Units (Final Report)

The US electric grid relies on conventional fossil fuel power plants for reliable and secure power, but these plants suffer from physical and financial strain due to the influx of inexpensive and variable solar and wind electricity. Conventional power plants need to generate electricity flexibly and on-demand to accommodate these renewable resources on the grid. Integrating a low-cost thermal energy storage (TES) gives fossil assets the ability to regulate their output efficiently and optimize the plant operation to maximize revenue in the wholesale electricity market. Element 16’s TES concept uses sulfur, a byproduct of the oil & gas industry, as the storage media that is 10 times cheaper than molten salt used in commercial two-tank TES technology. In this project, the team completed a detailed feasibility and technoeconomic study establishing the impact, cost and performance of molten sulfur TES system integrated with fossil assets.

20 FOSSIL-FUELED POWER PLANTS↗
DOE OSTI2018

Partial replacement of fossil fuels in a cement plant: Assessment of human health risks by metals, metalloids and PCDD/Fs

Highlights: • The environmental concentrations of metals and dioxins were not significantly modified. • Non-carcinogenic risks (metals and dioxins) were lower than the safety value (HQ• Carcinogenic risks were below the Spanish 10{sup −5} threshold. • The use of wastes as alternative fuels is being a good option for waste management. In 2009, a cement plant located in Alcanar (South Catalonia, Spain) started co-processing a special kind of refuse-derived fuel (RDF) called ENERFUEL™. In April 2014 and 2017, 5 and 8 years after RDF co-processing, the concentrations of metals and metalloids (As, Cd, Co, Cr, Cu, Hg, Mn, Ni, Pb, Sb, Tl, V and Zn) and PCDD/Fs were measured in samples of soils, herbage and air collected in the vicinity of the facility. The comparison of the current concentrations with those obtained in a baseline study (2008), when fossil fuels were used solely, has shown that the environmental concentrations of metals, metalloids and PCDD/Fs were not significantly modified. The concentrations of metals, metalloids and PCDD/Fs in soil, vegetation and air of Alcanar are in the low part of the ranges found around other cement plants in Catalonia (in general, below 50th percentile). Non-carcinogenic risks due to exposure to metals, metalloids and PCDD/Fs were lower than the safety value (HQ<1). In turn, carcinogenic risks were below the 10{sup −5} Spanish threshold. The present results corroborate that, from an environmental point of view, the use of wastes as alternative fuels (AF) in a cement plant, which is operating with suitable technical conditions, is a good option for waste management. It contributes towards overcoming challenges such as climate change and fossil fuel depletion, while utilizing principles of circular economy.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2016

Annual Fossil-Fuel CO2 Emissions: Global Stable Carbon Isotope Signature (DB1013, V. 2016)

The 2016 revision of this database contains estimates of the annual, global mean value of δ 13C of CO2 emissions from fossil-fuel consumption and cement manufacture for 1751-2013. These estimates of the carbon isotopic signature account for the changing mix of coal, petroleum, and natural gas being consumed and for the changing mix of petroleum from various producing areas with characteristic isotopic signatures. This time series of global fossil-fuel del 13C signature provides an additional constraint for balancing the sources and sinks of the global carbon cycle and complements the atmospheric δ 13C measurements that are used to partition the uptake of fossil carbon emissions among the ocean, atmosphere, and terrestrial biosphere reservoirs.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2026

Multiphysics and Multiscale Simulation Methods for Electromagnetic Energy Assisted Fossil Fuel to Hydrogen Conversion (Final Scientific/Technical Report)

This report summarizes the technical accomplishments of the four-year research project “Multiphysics and Multiscale Simulation Methods for Electromagnetic Energy Assisted Fossil Fuel to Hydrogen Conversion” (Award No. DE-FE0032092), conducted at Howard University and the University of Houston (subawardee) from September 2021 to August 2025. The project successfully achieved all four major objectives: 1. 3D Structural Characterization – Developed 3D optical imaging and mechanical sectioning methods to characterize catalyst distribution and support morphology in nickel foam substrates. Successfully reconstructed 3D geometries and imported them into COMSOL Multiphysics for electromagnetic simulations. 2. EM Hotspot Simulation – Created all-frequency stable electromagnetic formulations and 3D nodal discontinuous Galerkin (NDG) methods for coupled electromagnetic-thermal-fluid problems in multiscale catalytic media. Demonstrated stable solutions from DC to microwave frequencies. 3. Multiphysics Coupling – Developed multiscale simulation methods coupling FEM electromagnetic solvers with thermal transport equations. Reactive molecular dynamics (ReaxFF MD) simulations were performed to investigate catalytic reaction mechanisms at the atomistic level. Demonstrated electromagnetic-thermal co-simulation capabilities for porous catalyst structures. 4. System Optimization – Designed and optimized EM-assisted catalytic systems using nickel foam and carbon foam structures, demonstrating significant temperature increases due to microwave heating. Observed and characterized plasma generation in carbon fiber catalysts. Investigated multiple reaction chamber geometries for improved microwave energy deposition. The project produced significant scientific contributions including 15+ peer-reviewed publications, trained multiple Ph.D. students and undergraduate researchers, and advanced the understanding of microwave-assisted hydrogen production from fossil fuels.

08 HYDROGEN↗
DOE OSTI2025

Rate expressions and kinetic parameters for metal ferrites in relation to applications of fossil fuel conversion to hydrogen: Part 1 of 2

Here, the goal of the present work was to provide the necessary reaction emulation information to enable detailed process simulation of a chemical looping H 2 production system from fossil fuels using CaFe 2 O 4 . This specifically pertained to the necessary kinetic data, reaction model development, and model rate parameters required for reaction emulation in both reducing and oxidizing environments. A logical methodology was defined, which included discretization of the reaction network, establishing a core model for reaction emulation that could be adapted based on the system phenomena, and development of a rate parameter regression tool designed around the core model. An extensive array of data sets was acquired by which parametric regressions were performed. The work presented and tabulated a comprehensive set of rate parameters for the reduction and oxidation reactions of CaFe 2 O 4 and descendent phases of Ca 2 Fe 2 O 5 , FeO, Fe 3 O 4 , Fe, and CaO to emulate reaction behavior in a looping-based process environment. This included direct reduction using CH 4 , H 2 , and CO, and direct oxidation reactions with steam, CO 2 and O 2 . Dynamic equilibrium was quantified for reactions that could utilize H 2 O and CO 2 as soft oxidants to re-saturate lattice oxygen in the depleted structure/phases. The kinetics associated with the oxidative mechanisms with the soft oxidants were quantified and compared to those of the reducing counterparts. The analysis provided critical insight to emulate reactions for a process that seeks to use natural gas (NG) or other fossil fuels as a direct reductant for the end goal of H 2 production.

calcium ferrite oxygen carriers↗
DOE OSTI2016

Fossil-fueled development (SSP5): An energy and resource intensive scenario for the 21st century

Here, this paper presents a set of energy and resource intensive scenarios based on the concept of Shared Socio-Economic Pathways (SSPs). The scenario family is characterized by rapid and fossil-fueled development with high socio-economic challenges to mitigation and low socio-economic challenges to adaptation (SSP5). A special focus is placed on the SSP5 marker scenario developed by the REMIND-MAgPIE integrated assessment modeling framework. The SSP5 scenarios exhibit very high levels of fossil fuel use, up to a doubling of global food demand, and up to a tripling of energy demand and greenhouse gas emissions over the course of the century, marking the upper end of the scenario literature in several dimensions. The SSP5 marker scenario results in a radiative forcing pathway close to the highest Representative Concentration Pathway (RCP8.5), and represents currently the only socio-economic scenario family that can be combined with climate model projections based on RCP8.5. This paper further investigates the direct impact of mitigation policies on the energy, land and emissions dynamics confirming high socio-economic challenges to mitigation in SSP5. Nonetheless, mitigation policies reaching climate forcing levels as low as in the lowest Representative Concentration Pathway (RCP2.6) are accessible in SSP5. Finally, the SSP5 scenarios presented in this paper aim to provide useful reference points for future climate change, climate impact, adaption and mitigation analysis, and broader questions of sustainable development.

02 PETROLEUM↗
DOE OSTI2018

The Open-source Data Inventory for Anthropogenic CO 2 , version 2016 (ODIAC2016): a global monthly fossil fuel CO 2 gridded emissions data product for tracer transport simulations and surface flux inversions

The Open-source Data Inventory for Anthropogenic CO 2 (ODIAC) is a global high-spatial-resolution gridded emissions data product that distributes carbon dioxide (CO 2 ) emissions from fossil fuel combustion. The emissions spatial distributions are estimated at a 1 × 1 km spatial resolution over land using power plant profiles (emissions intensity and geographical location) and satellite-observed nighttime lights. This work describes the year 2016 version of the ODIAC emissions data product (ODIAC2016) and presents analyses that help guide data users, especially for atmospheric CO 2 tracer transport simulations and flux inversion analysis. Since the original publication in 2011, we have made modifications to our emissions modeling framework in order to deliver a comprehensive global gridded emissions data product. Major changes from the 2011 publication are (1) the use of emissions estimates made by the Carbon Dioxide Information Analysis Center (CDIAC) at the Oak Ridge National Laboratory (ORNL) by fuel type (solid, liquid, gas, cement manufacturing, gas flaring, and international aviation and marine bunkers); (2) the use of multiple spatial emissions proxies by fuel type such as (a) nighttime light data specific to gas flaring and (b) ship/aircraft fleet tracks; and (3) the inclusion of emissions temporal variations. Using global fuel consumption data, we extrapolated the CDIAC emissions estimates for the recent years and produced the ODIAC2016 emissions data product that covers 2000–2015. Our emissions data can be viewed as an extended version of CDIAC gridded emissions data product, which should allow data users to impose global fossil fuel emissions in a more comprehensive manner than the original CDIAC product. Our new emissions modeling framework allows us to produce future versions of the ODIAC emissions data product with a timely update. Such capability has become more significant given the CDIAC/ORNL's shutdown. The ODIAC data product could play an important role in supporting carbon cycle science, especially modeling studies with space-based CO 2 data collected in near real time by ongoing carbon observing missions such as the Japanese Greenhouse gases Observing SATellite (GOSAT), NASA's Orbiting Carbon Observatory-2 (OCO-2), and upcoming future missions. The ODIAC emissions data product including the latest version of the ODIAC emissions data (ODIAC2017, 2000–2016) is distributed from http://db.cger.nies.go.jp/dataset/ODIAC/ with a DOI (https://doi.org/10.17595/20170411.001).

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

Shifting from Fossil Fuel Reliance to Green Energy Sovereignty: Ute Mountain Ute Tribe

Self-determination has been an on-going effort for Native American people and gained much traction with the passing of The Energy Policy Act of 2005, which included the Indian Tribal Energy Development and Self-Determination Act. Congress passed this act to assist Native American tribes and Alaska Native villages with planning, development, and assistance to achieve their energy goals. The Ute Mountain Ute Tribe (UMUT) has relied on oil and natural gas for economic support the last 70 years. Burning fossil fuels, along with oil and gas development, decreases the quality of air and leads to increased greenhouse gas emissions. Subsequently, the burning of fossil fuels to produce energy is now more costly than many renewable energy sources, including solar photovoltaic (PV) systems. Environmental stewardship, along with the need to maintain revenue generation, has led UMUT’s efforts to achieve energy self-determinism employing PV and exploring other technology. In the past, the tribe completed a 1 megawatt PV project near Towaoc, Colorado, which serves as a case study on the tribe’s energy goals: a future where renewables will dominate their energy landscape. This paper explores UMUT’s past and on-going efforts toward energy independence and how it relates to the broader landscape of Native American energy sovereignty.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗
DOE OSTI2023

Fog and Froth-based Post Combustion CO 2 Capture in Fossil Fuel Power Plants

The University of Kentucky (UK) project titled “Fog+Froth-Based Post-Combustion CO 2 Capture in Fossil Fuel Power Plant”, DE-FE0031733, was conducted from 5/1/2019 to 12/31/2023 in two Budget Periods (BPs), with BP1 from 5/1/2019 to 1/31/2021 and with BP2 from 2/1/2021 to 12/31/2023. The overall goal is to reduce the CO 2 capture capital and operating cost by reducing the absorber size. Other participants included Industrial Climate Solutions, Inc. (ICSI), ALL4 and NexantECA. All project deliverables, milestones, and success criteria were met. Scaled-up demonstration of the compact absorber is planned and two specific aspects of the project demonstration, the solvent spray and the low absorber bottom packing temperature, have been incorporated into the overall UK CO 2 capture process which is on the road to large scale verification and commercialization.

01 COAL, LIGNITE, AND PEAT↗
DOE OSTI2016

A statistical approach for isolating fossil fuel emissions in atmospheric inverse problems

We study independent verification and quantification of fossil fuel (FF) emissions that constitutes a considerable scientific challenge. By coupling atmospheric observations of CO 2 with models of atmospheric transport, inverse models offer the possibility of overcoming this challenge. However, disaggregating the biospheric and FF flux components of terrestrial fluxes from CO 2 concentration measurements has proven to be difficult, due to observational and modeling limitations. In this study, we propose a statistical inverse modeling scheme for disaggregating winter time fluxes on the basis of their unique error covariances and covariates, where these covariances and covariates are representative of the underlying processes affecting FF and biospheric fluxes. The application of the method is demonstrated with one synthetic and two real data prototypical inversions by using in situ CO 2 measurements over North America. Also, inversions are performed only for the month of January, as predominance of biospheric CO 2 signal relative to FF CO 2 signal and observational limitations preclude disaggregation of the fluxes in other months. The quality of disaggregation is assessed primarily through examination of a posteriori covariance between disaggregated FF and biospheric fluxes at regional scales. Findings indicate that the proposed method is able to robustly disaggregate fluxes regionally at monthly temporal resolution with a posteriori cross covariance lower than 0.15 µmol m -2 s -1 between FF and biospheric fluxes. Error covariance models and covariates based on temporally varying FF inventory data provide a more robust disaggregation over static proxies (e.g., nightlight intensity and population density). However, the synthetic data case study shows that disaggregation is possible even in absence of detailed temporally varying FF inventory data.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

Catalytic Hydroprocessing of Single-Cell Oils to Hydrocarbon Fuels : Converting microbial lipids to fuels is a promising approach to replace fossil fuels

Microbial lipids hold great promise as biofuel precursors, and research efforts to convert such lipids to renewable diesel fuels have been increasing in recent years. In contrast to the numerous literature reviews on growing, characterising and extracting lipids from oleaginous microbes, and on converting vegetable oils to hydrocarbon fuels, this review aims to provide insight into aspects that are specific to hydroprocessing microbial lipids. While standard hydrotreating catalysts generally perform well with terrestrial oils, differences in lipid speciation and the presence of co-extracted compounds, such as chlorophyll and sterols, introduce additional complexities into the process for microbial lipids. Lipid cleanup steps can be introduced to produce suitable feedstocks for catalytic upgrading.

09 BIOMASS FUELS↗
DOE OSTI2022

Solution combustion synthesis of iron-based alumina nanocomposites for clean production of hydrogen from fossil fuels

Iron-based alumina nanocomposites are promising materials for microwave-assisted thermocatalytic dehydrogenation of fossil fuels, which has been proposed for the production of hydrogen with no CO2 emissions. Solution combustion synthesis (SCS) is an attractive technique for the fabrication of these materials because it has been used for synthesis of many nanoscale oxides. However, SCS can be carried out using different organic fuels and different heating equipment, and it is important to determine which fuel and heating mode generate materials with the best properties for dehydrogenation, such as maximized specific surface area. In the present work, the iron-based alumina nanocomposites were obtained by SCS using two different fuels (citric acid and glycine) and two different heating modes (a hotplate and a muffle furnace). The precursors/oxidizers were iron nitrate and aluminum nitrate. They were mixed with the fuel according to stoichiometry and dissolved in water. Heating the solution resulted in combustion synthesis. The products were characterized by X-ray diffraction analysis, Brunauer-Emmett-Teller surface area analysis, laser diffraction particle size analysis, scanning electron microscopy, and energy dispersive X-ray spectroscopy. The experiments have shown that the specific surface area of the iron-based alumina nanocomposites obtained by SCS can be dramatically increased by using citric acid instead of glycine, and additionally by using a muffle furnace instead of a hotplate.

Solution combustion synthesis, Nanoscale metal oxi↗
DOE OSTI2023

Fossil Fuel Transitions Framework: Case Studies of the Decision-Making Process for Energy and Economic Development Pathways

Each community is unique, and transitions must be tailored to local and national contexts, with recognition that access to financing is a key differentiator between wealthy and low-to-middle income countries. This analysis examines six community fossil fuel transitions in two different country contexts to provide insights on inclusive processes and decision-making criteria that bring forth positive outcomes for the communities. In both the United States and Chile, a coordination mechanism is established across government agencies and the importance of stakeholder engagement is recognized. In many cases, the government, local community groups, and electric utility or industry players have a critical role in transition planning and support.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗