Search NASA⌕ Search

SEARCH · Search NASA

Results for “FREQUENCY ANALYSIS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3

A radio-frequency analysis of paraboloidal antennas located near diffracting fences

The cylindrical waves associated with the Sommerfeld solution for a diffracting half-plane are applied in the evaluation of the effects of secondary radiation on the focal-region-fields of paraboloids. A cross-correlation between the computed focal-region-fields and the feed-antenna-fields is then introduced to determine the modified radiation pattern of paraboloidal antennas. The half-plane solution is adapted to estimate the effects of a polygonal fence on 9-meter S-band and 3-meter S- and Ku-band antennas at the Merrit Island, Fl Spacecraft Tracking and Data Network Station.

Schmidt, R. F.↗

Ultrasonic spectrum analysis using frequency-tracked gated RF pulses

A new method of ultrasonic frequency analysis is introduced which employs frequency-tracked gated RF drive pulses rather than shock-excited broadband spikes to generate the ultrasonic waveform. The new technique, a variation of the sampled-continuous wave technique, eliminates problems associated with finite pulse widths of conventional methods. It is shown to yield correct ultrasonic wave velocity measurements of the sample irrespective of receiver gate width or position provided any portions of two successive echoes are gated simultaneously into the spectrum analyzer. The experimental observations are substantiated by a theoretical model based on the time-frequency domain formulation of ultrasonic frequency analysis.

Cantrell, J. H., Jr.↗

Software For Multivariable Frequency-Domain Analysis

FREQ (Multivariable Frequency Domain Singular Value Analysis Package) software package of subroutines performing frequency-domain analysis of: continuous- or discrete-multivariable linear systems; any continuous system for which one calculates transfer matrix at points on imaginary axis; or any discrete system for which one calculates transfer matrix at points on unit circle. Four different versions available. Single-precision brief version LAR-14119, single-precision complete version LAR-14120, double-precision brief version LAR-14121, and double-precision complete version LAR-14122. Written in ANSI standard FORTRAN 77.

Armstrong, Ernest S.↗

Method and apparatus for frequency spectrum analysis

A method for frequency spectrum analysis of an unknown signal in real-time is discussed. The method is based upon integration of 1-bit samples of signal voltage amplitude corresponding to sine or cosine phases of a controlled center frequency clock which is changed after each integration interval to sweep the frequency range of interest in steps. Integration of samples during each interval is carried out over a number of cycles of the center frequency clock spanning a number of cycles of an input signal to be analyzed. The invention may be used to detect the frequency of at least two signals simultaneously. By using a reference signal of known frequency and voltage amplitude (added to the two signals for parallel processing in the same way, but in a different channel with a sampling at the known frequency and phases of the reference signal), the absolute voltage amplitude of the other two signals may be determined by squaring the sine and cosine integrals of each channel and summing the squares to obtain relative power measurements in all three channels and, from the known voltage amplitude of the reference signal, obtaining an absolute voltage measurement for the other two signals by multiplying the known voltage of the reference signal with the ratio of the relative power of each of the other two signals to the relative power of the reference signal.

Cole, Steven W.↗

Linearized blade row compression component model. Stability and frequency response analysis of a J85-3 compressor

NASA developed stability and frequency response analysis techniques were applied to a dynamic blade row compression component stability model to provide a more economic approach to surge line and frequency response determination than that provided by time-dependent methods. This blade row model was linearized and the Jacobian matrix was formed. The clean-inlet-flow stability characteristics of the compressors of two J85-13 engines were predicted by applying the alternate Routh-Hurwitz stability criterion to the Jacobian matrix. The predicted surge line agreed with the clean-inlet-flow surge line predicted by the time-dependent method to a high degree except for one engine at 94% corrected speed. No satisfactory explanation of this discrepancy was found. The frequency response of the linearized system was determined by evaluating its Laplace transfer function. The results of the linearized-frequency-response analysis agree with the time-dependent results when the time-dependent inlet total-pressure and exit-flow function amplitude boundary conditions are less than 1 percent and 3 percent, respectively. The stability analysis technique was extended to a two-sector parallel compressor model with and without interstage crossflow and predictions were carried out for total-pressure distortion extents of 180 deg, 90 deg, 60 deg, and 30 deg.

Tesch, W. A.↗

SCOLE dynamic analysis and frequency response using DISTEL software

The distributed element dynamic analysis package DISTEL is used to analyze the NASA/Institute of Electrical and Electronics Engineers' Spacecraft Control Laboratory Experiment (SCOLE). In this configuration, the Space Shuttle motion is coupled to the motion of a large dish antenna through a Shuttle-deployed flexible mast of 40 m long. Due to the high asymmetry of the system, the motions about the different axes (roll, pitch, yaw) are severely coupled. A general purpose software like DISTEL is especially suited for this kind of analysis. Modal frequencies of the complete spacecraft and impulse response (modal gains) to excitations at different locations are obtained. Mode-shape plots of the deformations of the entire system are given. Finally, results obtained at NASA and at Purdue University are compared to those found by the European space technology center, ESTEC.

Poelaert, D.↗

Advancements in Frequency Domain Analysis of Dual Centerline Propellant Tanks for Space Vehicle Stability and Design

This paper presents advancements in the frequency domain stability analysis for landing and ascent vehicle configurations with dual centerline propellant tanks, developed in support of Guidance, Navigation, and Control (GNC) insight activities for the Human Landing System project. The study focuses on the impact of axial thrust on the dual tank slosh danger zone solution. The frequency domain stability analysis tool is developed within the GeneraLized Aerospace Simulation in Simulink® (GLASS) framework at NASA Marshall Space Flight Center. The frequency domain stability analysis tool is used to determine slosh damping and control systems design requirements. The accuracy of the tool’s instability predictions is validated against time-domain outcomes within the GLASS simulation environment, showing consistent and anticipated results. Additionally, the method is validated by comparing its results with Frequency Domain Analysis and Comparison Tool Assuming Linearity (FRACTAL), a frequency domain analysis tool with extensive heritage and rigorous verification and validation using NASA Ares I-X and SLS flight data. The findings of this paper contribute to a better understanding of dual-tank slosh instability and support improved design and operation margins of space vehicles.

Han Woong (Brian) Bae↗

Advancements in Frequency Domain Analysis of Dual Centerline Propellant Tanks for Space Vehicle Stability and Design

This paper presents advancements in the frequency domain stability analysis for landing and ascent vehicle configurations with dual centerline propellant tanks, developed in support of Guidance, Navigation, and Control (GNC) insight activities for the Human Landing System project. The study focuses on the impact of axial thrust on the dual tank slosh danger zone solution. The frequency domain stability analysis tool is developed within the GeneraLized Aerospace Simulation in Simulink® (GLASS) framework at NASA Marshall Space Flight Center. The frequency domain stability analysis tool is used to determine slosh damping and control systems design requirements. The accuracy of the tool’s instability predictions is validated against time-domain outcomes within the GLASS simulation environment, showing consistent and anticipated results. Additionally, the method is validated by comparing its results with Frequency Domain Analysis and Comparison Tool Assuming Linearity (FRACTAL), a frequency domain analysis tool with extensive heritage and rigorous verification and validation using NASA Ares I-X and SLS flight data. The findings of this paper contribute to a better understanding of dual-tank slosh instability and support improved design and operation margins of space vehicles.

Han Woong (Brian) Bae↗

High-frequency Electrocardiogram Analysis in the Ability to Predict Reversible Perfusion Defects during Adenosine Myocardial Perfusion Imaging

Background: A previous study has shown that analysis of high-frequency QRS components (HF-QRS) is highly sensitive and reasonably specific for detecting reversible perfusion defects on myocardial perfusion imaging (MPI) scans during adenosine. The purpose of the present study was to try to reproduce those findings. Methods: 12-lead high-resolution electrocardiogram recordings were obtained from 100 patients before (baseline) and during adenosine Tc-99m-tetrofosmin MPI tests. HF-QRS were analyzed regarding morphology and changes in root mean square (RMS) voltages from before the adenosine infusion to peak infusion. Results: The best area under the curve (AUC) was found in supine patients (AUC=0.736) in a combination of morphology and RMS changes. None of the measurements, however, were statistically better than tossing a coin (AUC=0.5). Conclusion: Analysis of HF-QRS was not significantly better than tossing a coin for determining reversible perfusion defects on MPI scans.

Tragardh, Elin↗

Hypersonic vehicle control law development using H(infinity) and micron-synthesis

Hypersonic vehicle control law development using H(infinity) and mu-synthesis is discussed. Airbreathing SSTO vehicles has a mutli-faceted mission that includes orbital operations, as well as re-entry and descent culminating in horizontal landing. However, the most challenging part of the operations is the ascent to orbit. The airbreathing propulsion requires lengthy atmospheric flight that may last as long as 30 minutes and take the vehicle half way around the globe. The vehicles's ascent is characterized by tight payload to orbit margins which translate into minimum fuel orbit as the performance criteria. Issues discussed include: SSTO airbreathing vehicle issues; control system performance requirements; robust control law framework; H(infinity) controller frequency analysis; and mu controller frequency analysis.

Gregory, Irene M.↗

User's Guide for MSAP2D: A Program for Unsteady Aerodynamic and Aeroelastic (Flutter and Forced Response) Analysis of Multistage Compressors and Turbines

This guide describes the input data required for using MSAP2D (Multi Stage Aeroelastic analysis Program - Two Dimensional) computer code. MSAP2D can be used for steady, unsteady aerodynamic, and aeroelastic (flutter and forced response) analysis of bladed disks arranged in multiple blade rows such as those found in compressors, turbines, counter rotating propellers or propfans. The code can also be run for single blade row. MSAP2D code is an extension of the original NPHASE code for multiblade row aerodynamic and aeroelastic analysis. Euler equations are used to obtain aerodynamic forces. The structural dynamic equations are written for a rigid typical section undergoing pitching (torsion) and plunging (bending) motion. The aeroelastic equations are solved in time domain. For single blade row analysis, frequency domain analysis is also provided to obtain unsteady aerodynamic coefficients required in an eigen analysis for flutter. In this manual, sample input and output are provided for a single blade row example, two blade row example with equal and unequal number of blades in the blade rows.

Reddy, T. S. R.↗

Investigation of Aperiodic Time Processes with Autocorrelation and Fourier Analysis

Autocorrelation and frequency analyses of a series of aperiodic time events, in particular, filtered noises and sibilant sounds, were made. The position and band width of the frequency ranges are best obtained from the frequency analysis, but the energies contained in the several bands are most easily obtained from the autocorrelation function. The mean number of zero crossings of the time function was determined from the curvature of the latter function in the vicinity of the zero crossing, and also with the aid of a decimal counter. The second method was found to be more exact.

Exner, Marie Luise↗

Flight-testing and frequency-domain analysis for rotorcraft handling qualities

A demonstration of frequency-domain flight-testing techniques and analysis was performed on a U.S. Army OH-58D helicopter in support of the OH-58D Airworthiness and Flight Characteristics Evaluation and of the Army's development and ongoing review of Aeronautical Design Standard 33C, Handling Qualities Requirements for Military Rotorcraft. Hover and forward flight (60 kn) tests were conducted in 1 flight hour by Army experimental test pilots. Further processing of the hover data generated a complete database of velocity, angular-rate, and acceleration-frequency responses to control inputs. A joint effort was then undertaken by the Airworthiness Qualification Test Dirtectorate and the U.S. Army Aeroflightdynamics Directorate to derive handling-quality information from the frequency-domain database using a variety of approaches. This report documents numerous results that have been obtained from the simple frequency-domain tests; in many areas, these results provide more insight into the aircraft dynmamics that affect handling qualities than do traditional flight tests. The handling-quality results include ADS-33C bandwidth and phase-delay calculations, vibration spectral determinations, transfer-function models to examine single-axis results, and a six-degree-of-freedom fully coupled state-space model. The ability of this model to accurately predict responses was verified using data from pulse inputs. This report also documents the frequency-sweep flight-test technique and data analysis used to support the tests.

Ham, Johnnie A.↗