Search NASA⌕ Search

SEARCH · Search NASA

Results for “Finite-element methods”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
NASA NTRS1975

Application of an advanced computerized structural design system to an arrow-wing supersonic cruise aircraft

A structural design study of an arrow-wing supersonic cruise aircraft has been made using the integrated design system, ATLAS, and a relatively large analytical finite-element model containing 8500 degrees of freedom. This paper focuses on structural design methods developed and used in support of the study with emphasis on aeroelasticity. The use of ATLAS permitted (1) automatic resizing of the wing structure for multiple load conditions, (2) rapid evaluation of aeroelastic effects, and (3) an iterative approach to the correction of flutter deficiencies. The significant results of the study are discussed along with the advantages derived from the use of an advanced structural design system in preliminary design studies.

Robinson, J. C.↗
NASA NTRS1974

Analytical Dynamics and Nonrigid Spacecraft Simulation

Application to the simulation of idealized spacecraft are considered both for multiple-rigid-body models and for models consisting of combination of rigid bodies and elastic bodies, with the elastic bodies being defined either as continua, as finite-element systems, or as a collection of given modal data. Several specific examples are developed in detail by alternative methods of analytical mechanics, and results are compared to a Newton-Euler formulation. The following methods are developed from d'Alembert's principle in vector form: (1) Lagrange's form of d'Alembert's principle for independent generalized coordinates; (2) Lagrange's form of d'Alembert's principle for simply constrained systems; (3) Kane's quasi-coordinate formulation of D'Alembert's principle; (4) Lagrange's equations for independent generalized coordinates; (5) Lagrange's equations for simply constrained systems; (6) Lagrangian quasi-coordinate equations (or the Boltzmann-Hamel equations); (7) Hamilton's equations for simply constrained systems; and (8) Hamilton's equations for independent generalized coordinates.

Likins, P. W.↗
NASA NTRS1975

A method for the dynamic and thermal stress analysis of space shuttle surface insulation

The thermal protection system of the space shuttle consists of thousands of separate insulation tiles bonded to the orbiter's surface through a soft strain-isolation layer. The individual tiles are relatively thick and possess nonuniform properties. Therefore, each is idealized by finite-element assemblages containing up to 2500 degrees of freedom. Since the tiles affixed to a given structural panel will, in general, interact with one another, application of the standard direct-stiffness method would require equation systems involving excessive numbers of unknowns. This paper presents a method which overcomes this problem through an efficient iterative procedure which requires treatment of only a single tile at any given time. Results of associated static, dynamic, and thermal stress analyses and sufficient conditions for convergence of the iterative solution method are given.

Ojalvo, I. U.↗
NASA NTRS1974

Nonlinear finite-element analysis of laminated composite shells

Two aspects of the geometrically nonlinear analysis of laminated composite shells are considered in this paper. The first pertains to the simplifications and computational advantages resulting from the use of group-theoretic methods in conjunction with computerized symbolic (algebraic) manipulation in the element development. The second aspect pertains to the combined effects of shear deformation and nonlinearity on the accuracy and convergence of two-dimensional, shear-flexible stiffness finite element models.

Noor, A. K.↗
NASA NTRS1972

Dynamic response analysis of geometrically non-linear structures subjected to high impact.

Description of an efficient digital computer method for the determination of the propagation of elastic stresses and deformations in certain geometrically nonlinear structures subjected to high impact loading. The finite-element matrix displacement approach utilizing curved quadrilateral shell elements in conjunction with a nodewise predictor-corrector method employing Runge-Kutta extrapolation techniques has been adopted for the present solution. The related computer program written in FORTRAN V for the UNIVAC 1108 computer has proved to be effective for the solution of a range of practical problems including rectangular and cylindrical panels. Numerical results are presented for a relevant structure, the cell container, and the negative electrode of an impact-resistant battery subjected to high impact, simulating its free landing on a planetary surface.

Gupta, K. K.↗
NASA NTRS1972

Automated procedures for sizing aerospace vehicle structures /SAVES/

Results from a continuing effort to develop automated methods for structural design are described. A system of computer programs presently under development called SAVES is intended to automate the preliminary structural design of a complete aerospace vehicle. Each step in the automated design process of the SAVES system of programs is discussed, with emphasis placed on use of automated routines for generation of finite-element models. The versatility of these routines is demonstrated by structural models generated for a space shuttle orbiter, an advanced technology transport,n hydrogen fueled Mach 3 transport. Illustrative numerical results are presented for the Mach 3 transport wing.

Giles, G. L.↗
NASA NTRS1974

Cyclic-stress analysis of notches for supersonic transport conditions

The feasibility of using the finite element method to account for the effects of cyclic load and temperature on local stresses and strains at a notch was demonstrated. The behavior of a notched titanium panel was studied under variable loads and temperatures representative of flight conditions for the lower wing surface of a Supersonic Transport (SST). The analysis was performed with the use of the BOPACE finite-element computer program which provides capability to determine high temperature and large viscoplastic effects caused by cyclic thermal and mechanical loads. The analysis involves the development of the finite-element model as well as determination of the structural behavior of the notched panel. Results are presented for twelve SST flights comprised of five different load-temperature cycles. The results show the approach is feasible, but material response to cyclic loads, temperatures, and hold times requires improved understanding to allow proper modeling of the material.

Source record↗
NASA NTRS1975

Analytical study of mixing and reacting three-dimensional supersonic combustor flow fields

An analytical investigation is presented of mixing and reacting hydrogen jets injected from multiple orifices transverse and parallel to a supersonic airstream. The COMOC computer program, based upon a finite-element solution algorithm, was developed to solve the governing equations for three-dimensional, turbulent, reacting, boundary-region, and confined flow fields. The computational results provide a three-dimensional description of the velocity, temperature, and species-concentration fields downstream of hydrogen injection. Detailed comparisons between cold-flow data and results of the computational analysis have established validity of the turbulent-mixing model based on the elementary mixing-length hypothesis. A method is established to initiate computations for reacting flow fields based upon cold-flow correlations and the appropriate experimental parameters of Mach number, injector spacing, and pressure ratio. Key analytical observations on mixing and combustion efficiency for reacting flows are presented and discussed.

Baker, A. J.↗
NASA NTRS1976

Optimization of continuous one-dimensional structures under steady harmonic excitation

The paper examines some questions relating to the optimal design of continuous one-dimensional structures driven by harmonically oscillating loads. Optimal-control methods are applied to a cantilever bar driven sinusoidally by an axial force at its tip to illustrate the minimum-weight design of one-dimensional structures under dynamic excitation. Realistic constraints are imposed during the optimizations, including a maximum allowable stress amplitude at any point along the bar and a minimum cross-sectional area. It is shown that in the absence of damping, the design space may contain many disjoint feasible regions, and multiple optima can exist. Detailed solutions are obtained for continuous bars with an excitation frequency less than, and then greater than, the fundamental free-vibration frequency. It is found that above a certain excitation frequency, two or more arcs with different constraints characterize the optimal designs. It is concluded that when more than two different constrained arcs characterize the optimal solution, the continuum approach may be impractical, and finite-element approximations may offer the only alternative.

Johnson, E. H.↗
NASA NTRS1972

Two-dimensional finite-element temperature variance analysis

The finite element method is extended to thermal analysis by forming a variance analysis of temperature results so that the sensitivity of predicted temperatures to uncertainties in input variables is determined. The temperature fields within a finite number of elements are described in terms of the temperatures of vertices and the variational principle is used to minimize the integral equation describing thermal potential energy. A computer calculation yields the desired solution matrix of predicted temperatures and provides information about initial thermal parameters and their associated errors. Sample calculations show that all predicted temperatures are most effected by temperature values along fixed boundaries; more accurate specifications of these temperatures reduce errors in thermal calculations.

Heuser, J. S.↗
NASA NTRS1972

Computer program: Jet 3 to calculate the large elastic plastic dynamically induced deformations of free and restrained, partial and/or complete structural rings

A user-oriented FORTRAN 4 computer program, called JET 3, is presented. The JET 3 program, which employs the spatial finite-element and timewise finite-difference method, can be used to predict the large two-dimensional elastic-plastic transient Kirchhoff-type deformations of a complete or partial structural ring, with various support conditions and restraints, subjected to a variety of initial velocity distributions and externally-applied transient forcing functions. The geometric shapes of the structural ring can be circular or arbitrarily curved and with variable thickness. Strain-hardening and strain-rate effects of the material are taken into account.

Wu, R. W.↗
NASA NTRS1974

Development of solution techniques for nonlinear structural analysis

Nonlinear structural solution methods in the current research literature are classified according to order of the solution scheme, and it is shown that the analytical tools for these methods are uniformly derivable by perturbation techniques. A new perturbation formulation is developed for treating an arbitrary nonlinear material, in terms of a finite-difference generated stress-strain expansion. Nonlinear geometric effects are included in an explicit manner by appropriate definition of an applicable strain tensor. A new finite-element pilot computer program PANES (Program for Analysis of Nonlinear Equilibrium and Stability) is presented for treatment of problems involving material and geometric nonlinearities, as well as certain forms on nonconservative loading.

Vos, R. G.↗
NASA NTRS1975

Application of NASTRAN for stress analysis of left ventricle of the heart

Knowing the stress and strain distributions in the left ventricular wall of the heart is a prerequisite for the determination of the muscle elasticity and contractility in the process of assessing the functional status of the heart. NASTRAN was applied for the calculation of these stresses and strains and to help in verifying the results obtained by the computer program FEAMPS which was specifically designed for the plane-strain finite-element analysis of the left ventricular cross sections. Adopted for the analysis are the true shape and dimensions of the cross sections reconstructed from multiplanar X-ray views of a left ventricle which was surgically isolated from a dog's heart but metabolically supported to sustain its beating. A preprocessor was prepared to accommodate both FEAMPS and NASTRAN, and it has also facilitated the application of both the triangular element and isoparameteric quadrilateral element versions of NASTRAN. The stresses in several crucial regions of the left ventricular wall calculated by these two independently developed computer programs are found to be in good agreement. Such confirmation of the results is essential in the development of a method which assesses the heart performance.

Pao, Y. C.↗
NASA NTRS1974

Finite-element analysis of vibration and flutter of cantilever anisotropic plates

The hybrid stress finite element method is used to study the effects of filament angle and orthotropicity parameter on the vibration and flutter characteristics of cantilevered anisotropic plates. The results indicate a generally strong lack of monotonic dependence on filament angle. Also, the natural frequency in certain cases involving the first few modes, can become relatively insensitive to both filament angle and orthotropicity parameter for a range of filament angle beyond 70 deg. Values of critical dynamic pressure are obtained by a modal approach, in which the mode shapes are obtained by the hybrid stress method. Convergence of the modal method is rather rapid for the configurations analyzed, and a comparison of the method with an exact solution for the case of an isotropic simply supported plate shows that use of six modes gives excellent agreement.

Rossettos, J. N.↗
NASA NTRS1975

Finite-element formulations for problems of large elastic-plastic deformation

An Eulerian finite element formulation is presented for problems of large elastic-plastic flow. The method is based on Hill's variational principle for incremental deformations, and is ideally suited to isotropically hardening Prandtl-Reuss materials. Further, the formulation is given in a manner which allows any conventional finite element program, for 'small strain' elastic-plastic analysis, to be simply and rigorously adapted to problems involving arbitrary amounts of deformation and arbitrary levels of stress in comparison to plastic deformation moduli. The method is applied to a necking bifurcation analysis of a bar in plane-strain tension. The paper closes with a unified general formulation of finite element equations, both Lagrangian and Eulerian, for large deformations, with arbitrary choice of the conjugate stress and strain measures. Further, a discussion is given of other proposed formulations for elastic-plastic finite element analysis at large strain, and the inadequacies of some of these are commented upon.

Mcmeeking, R. M.↗