Search NASA⌕ Search

SEARCH · Search NASA

Results for “First principles calculations”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
DOE OSTI2018

A First-Principle Calculation and de Haas-van Alphen Effect Simulation in Superconductor LaNiC{sub 2}

In this article the electronic structure and de Haas-van Alphen effect of LaNiC{sub 2} have been calculated by using the first-principle calculations. The antisymmetric spin-orbit coupling effect causes splitting estimated to be 62.9 and 27.5 meV in the two bands crossing the Fermi level. Regular translations between spin-up and spin-down states have been observed and calculated in discrete ranges of energy. Spin-orbit coupled Fermi surfaces are derived and the related de Hass-van Alphen effects have been simulated from the ELK-flapw calculations. The unusual disconnections in low-frequency area have been discussed in details. The Fermi surface topology of spin-up (l + 1/2) is very different from that of spin-down (l − 1/2) which is also evident by the proportions of electron-like bands. Finally the relationship between simulation results and Fermi surface details has been discussed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2018

The Electronic Structures and Ferromagnetism of Cu-Doped ZnO: the First-Principle Calculation Study

We have carried out first-principle spin-polarized calculations to investigate the electronic structures and the magnetic properties of Cu-doped wurtzite ZnO. It was found that the Cu{sub Zn} substitution can introduce 1 μ{sub B} local magnetic moment into the doped system, whereas the ferromagnetic coupling between Cu{sub Zn}s is so weak that the system cannot keep ferromagnetism at higher temperature. In Zn vacancy (V{sub Zn}) and Cu{sub Zn} coexisted system, Cu is in the Cu {sup 2+}/Cu {sup 3+} mixed valence under the influence of acceptor defect V{sub Zn}. Cu-3d electrons couple with O(around V{sub Zn})-sp electrons and then form Cu{sup 2+} −V{sub Zn} −Cu{sup 2+} or Cu{sup 2+} −VZn−−Cu{sup 3+} bound magnetic polaron (BMP) in the range of 1.27 ∼ 1.90 nm. The overlapping between BMPs is the main ferromagnetism origin of ZnO/Cu. According to our analysis, we thought that ZnO/Cu system will display stronger ferromagnetism when the Cu concentration attains 3% in atomic percentage. The calculated results and analysis will shed light on the origin of ferromagnetism in ZnO/Cu.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2024

First-principles calculations of defects and electron–phonon interactions: Seminal contributions of Audrius Alkauskas to the understanding of recombination processes

First-principles calculations of defects and electron–phonon interactions play a critical role in the design and optimization of materials for electronic and optoelectronic devices. The late Audrius Alkauskas made seminal contributions to developing rigorous first-principles methodologies for the computation of defects and electron–phonon interactions, especially in the context of understanding the fundamental mechanisms of carrier recombination in semiconductors. Alkauskas was also a pioneer in the field of quantum defects, helping to build a first-principles understanding of the prototype nitrogen-vacancy center in diamond, as well as identifying novel defects. Here, we describe the important contributions made by Alkauskas and his collaborators and outline fruitful research directions that Alkauskas would have been keen to pursue. Audrius Alkauskas’ scientific achievements and insights highlighted in this article will inspire and guide future developments and advances in the field.

36 MATERIALS SCIENCE↗
DOE OSTI2018

First-principles calculations of lattice dynamics and thermodynamic properties for Yb 14 MnSb 11

Systematic first-principles calculations were performed to study the lattice dynamics of Yb 14 MnSb 11 and hence to obtain a wide range of its thermodynamic properties at high temperatures. Here, the calculated results were analyzed in terms of the lattice contribution and the electronic contribution, together with a comparison with a collection of experimental thermochemical data. At 0 K, the electronic density of states showed the typical feature of a p-type semiconductor—a small amount of unoccupied electronic states exclusively made of the major spin by a range of ~0.6 eV above the Fermi energy. It showed that the Mn atom had a ferromagnetic spin moment of ~4 μ B . Lastly, as a semiconductor, it was found that the electronic contribution to the heat capacity was substantial, with an electronic heat capacity coefficient of ~0.0006 J/mole-atom/K 2 .

36 MATERIALS SCIENCE↗
DOE OSTI2017

Multilayered vacuum-arc nanocomposite TiN/ZrN coatings before and after annealing: Structure, properties, first-principles calculations

Highlights: • Multilayer TiN/ZrN films were deposited using sequential vacuum-arc deposition of Ti and Zr targets in nitrogen atmosphere; • Several samples were annealed in air at the temperature 700 °C; • First-principles calculations of TiN(111), ZrN(111) structures and TiN(111)/ZrN(111) multilayer were carried out; • All deposited samples were highly polycrystalline with quite large 20–25 nm crystals; • The nanohardness and elastic modulus of non-annealed coatings reached 42 GPa and 348 GPa, respectively; • Deposited coatings demonstrate good wear and oxidation resistance; - Abstract: Nanoscale multilayered TiN/ZrN films were deposited using sequential vacuum-arc deposition of Ti and Zr targets in a nitrogen atmosphere. Studies of film's properties were carried out using various modern methods of analysis, such as XRD, STEM, HRTEM, SIMS combined with results of nanoindentation and tribological tests. To interpret the mechanical properties of the deposited multilayer films first-principles calculations of TiN(111), ZrN(111) structures and TiN(111)/ZrN(111) multilayer were carried out. To study the influence of thermal annealing, several samples were annealed in air at the temperature 700 °C. All deposited samples were highly polycrystalline with quite large 20–25 nm crystals. The crystalline planes were very ordinated and demonstrated an excellent coordinated growth. The nanohardness and elastic modulus of non-annealed coatings reached 42 GPa and 348 GPa, respectively. Annealing in air at the temperature 700 °C led to partial oxidation of the multilayered coatings, however hardness of the non-oxidized part of the coatings remained as high, as for initial coatings. All deposited coatings demonstrate good wear resistance.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2021

Photoluminescence spectra of point defects in semiconductors: Validation of first-principles calculations

Optically and magnetically active point defects in semiconductors are interesting platforms for the development of solid state quantum technologies. Their optical properties are usually probed by measuring photoluminescence spectra, which provide information on excitation energies and on the interaction of electrons with lattice vibrations. We present a combined computational and experimental study of photoluminescence spectra of defects in diamond and SiC, aimed at assessing the validity of theoretical and numerical approximations used in first-principles calculations, including the use of the Franck-Condon principle and the displaced harmonic oscillator approximation. We focus on prototypical examples of solid state qubits, the divacancy centers in SiC and the nitrogen-vacancy in diamond, and we report computed photoluminescence spectra as a function of temperature that are in very good agreement with the measured ones. As expected we find that the use of hybrid functionals leads to more accurate results than semilocal functionals. Interestingly our calculations show that constrained density functional theory (CDFT) and time-dependent hybrid DFT perform equally well in describing the excited state potential energy surface of triplet states; our findings indicate that CDFT, a relatively cheap computational approach, is sufficiently accurate for the calculations of photoluminescence spectra of the defects studied here. Finally, we find that only by correcting for finite-size effects and extrapolating to the dilute limit can one obtain a good agreement between theory and experiment. Our results provide a detailed validation protocol of first-principles calculations of photoluminescence spectra, necessary both for the interpretation of experiments and for robust predictions of the electronic properties of point defects in semiconductors.

36 MATERIALS SCIENCE↗
DOE OSTI2017

Elucidating the Formation Mechanisms of Silver Nanoparticles from a Comprehensive Simulation Based on First-Principles Calculations

The nucleation and growth of silver nanoparticles are modeled and simulated based on first-principles calculations. The formation energy of single-crystal and multiply twinned particles is calculated to elucidate the thermodynamic properties of particles and modeled as a function of geometric parameters. On the basis of the calculated formation energy and the molecular collision theory, Kinetic Monte Carlo simulations are performed to trace the formation process of silver nanoparticles. In particular, the temporal change of size distribution and morphology are obtained and used to elucidate the governing mechanism in each stage of the formation process. It is demonstrated that the formation process is separated into four phases depending on the power-law time dependence of the particle formation and they are characterized by the size difference between coalescent particles. The temperature dependence of size distribution and morphology is also studied to elucidate the underlying mechanisms. The findings are compared with classical theories quantitatively and a strategy to control the morphology of silver nanoparticles is discussed.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2016

First-principles calculations of lattice dynamics and thermal properties of polar solids

Although the theory of lattice dynamics was established six decades ago, its accurate implementation for polar solids using the direct (or supercell, small displacement, frozen phonon) approach within the framework of density-function-theory-based first-principles calculations had been a challenge until recently. It arises from the fact that the vibration-induced polarization breaks the lattice periodicity, whereas periodic boundary conditions are required by typical first-principles calculations, leading to an artificial macroscopic electric field. In conclusion, the article reviews a mixed-space approach to treating the interactions between lattice vibration and polarization, its applications to accurately predicting the phonon and associated thermal properties, and its implementations in a number of existing phonon codes.

36 MATERIALS SCIENCE↗
DOE OSTI2018

Insight into the oxidation mechanism of Nb3Si(111) surface: First-principles calculations

Highlights: • Oxygen adsorption behavior on Nb{sub 3}Si(111) is studied by using first-principles. • O atom tends to be adsorbed on the NbSi bridge site. • The capacity of oxidation follow the order of Cr > Al > Si. • Cr can improve the Nb{sub 3}Si’s oxidation resistance because of Cr d-orbital effect. - Abstract: The oxidation resistance plays an important role in high-temperature ceramics. Although transition metal silicides exhibit the better oxidation behavior, the improvement of oxidation resistance is still a great challenge for their applications. Here, we apply first-principles calculations to investigate the oxidation mechanism and the influence of alloying elements (Cr and Al) on the oxidation resistance of Nb{sub 3}Si(111) surface. The calculated results show that the O atom is adsorbed on the NbSi-bridge site because of the charge interaction between O-2p state, Si-3p state and Nb-4d state. We further find that Cr-doping is more thermodynamically stable than that of Al-doping. In particular, the capacity of oxidation resistance follows the order of Cr > Al > Si. Finally, we conclude that Cr-doping can effectively improve the oxidation resistance of Nb{sub 3}Si(111) surface. The calculated electronic structure shows that Cr d-orbital plays a crucial role in oxidation resistance.

36 MATERIALS SCIENCE↗
DOE OSTI2016

First-principles calculations of the electronic and structural properties of GaSb

In this paper, we carried out first-principles calculations in order to investigate the structural and electronic properties of the binary compound gallium antimonide (GaSb). This theoretical study was carried out using the Density Functional Theory within the plane-wave pseudopotential method. The effects of exchange and correlation (XC) were treated using the functional Local Density Approximation (LDA), generalized gradient approximation (GGA): Perdew–Burke–Ernzerhof (PBE), Perdew-Burke-Ernzerhof revised for solids (PBEsol), Perdew-Wang91 (PW91), revised Perdew–Burke–Ernzerhof (rPBE), Armiento–Mattson 2005 (AM05) and meta-generalized gradient approximation (meta-GGA): Tao–Perdew–Staroverov–Scuseria (TPSS) and revised Tao–Perdew–Staroverov–Scuseria (RTPSS) and modified Becke-Johnson (MBJ). We calculated the densities of state (DOS) and band structure with different XC potentials identified and compared them with the theoretical and experimental results reported in the literature. It was discovered that functional: LDA, PBEsol, AM05 and RTPSS provide the best results to calculate the lattice parameters (a) and bulk modulus (B{sub 0}); while for the cohesive energy (E{sub coh}), functional: AM05, RTPSS and PW91 are closer to the values obtained experimentally. The MBJ, Rtpss and AM05 values found for the band gap energy is slightly underestimated with those values reported experimentally.

36 MATERIALS SCIENCE↗
DOE OSTI2018

First-principles calculations and experimental studies of: XYZ 2 thermoelectric compounds: Detailed analysis of van der Waals interactions

First-principles calculations can accelerate the search for novel high-performance thermoelectric materials. However, the prediction of the thermoelectric properties is strongly dependent on the approximations used for the calculations. Here, thermoelectric properties were calculated with different computational approximations ( i.e. , PBE-GGA, HSE06, spin–orbit coupling and DFT-D3) for three layered XYZ 2 compounds (TmAgTe 2 , YAgTe 2 , and YCuTe 2 ). In addition to the computations, the structural, electrical and thermal properties of these compounds were measured experimentally and compared to the computations. Furthermore, an enhanced prediction of the crystal structure and heat capacity was achieved with the inclusion of van der Waals interactions due to more accurate modeling of the interatomic forces. In particular, a large shift of the acoustic phonons and low-frequency optical phonons to lower frequencies was observed from the dispersion-optimized structure. From the phonon dispersion curves of these compounds, the ultralow thermal conductivity in the investigated XYZ 2 compounds could be described by a recent developed minimum thermal conductivity model. Additionally, for the prediction of the electrical conductivity, a temperature-dependent relaxation time was used, and it was limited by acoustic phonons. While HSE06 has only a small influence on the electrical properties due to a computed band gap energy of >0.25 eV, the inclusion of both van der Waals interactions and spin–orbit coupling leads to a more accurate band structure, resulting in better prediction of electrical properties. Furthermore, the experimental thermoelectric properties of YAgTe 2 , TmAg 0.95 Zn 0.05 Te 2 and TmAg 0.95 Mg 0.05 Te 2 were measured, showing an increase in zT of TmAg 0.95 Zn 0.05 Te 2 by more than 35% ( zT = 0.47 ± 0.12) compared to TmAgTe 2 .

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2017

Probing Solid–Solid Interfacial Reactions in All-Solid-State Sodium-Ion Batteries with First-Principles Calculations

We present an exposition of first-principles approaches to elucidating interfacial reactions in all-solid-state sodium-ion batteries. We will demonstrate how thermodynamic approximations based on assumptions of fast alkali diffusion and multispecies equilibrium can be used to effectively screen combinations of Na-ion electrodes, solid electrolytes, and buffer oxides for electrochemical and chemical compatibility. We find that exchange reactions, especially between simple oxides and thiophosphate groups to form PO 4 3– , are the main cause of large driving forces for cathode/solid electrolyte interfacial reactions. A high reactivity with large volume changes is also predicted at the Na anode/solid electrolyte interface, while the Na 2 Ti 3 O 7 anode is predicted to be much more stable against a broad range of solid electrolytes. We identify several promising binary oxides, Sc 2 O 3 , SiO 2 , TiO 2 , ZrO 2 , and HfO 2 , that are similarly or more chemically compatible with most electrodes and solid electrolytes than the commonly used Al 2 O 3 is. Finally, we show that ab initio molecular dynamics simulations of the NaCoO 2 /Na 3 PS 4 interface model predict that the formation of SO 4 2– -containing compounds and Na 3 P is kinetically favored over the formation of PO 4 3– -containing compounds, in contrast to the predictions of the thermodynamic models. As a result, this work provides useful insights into materials selection strategies for enabling stable electrode/solid electrolyte interfaces, a critical bottleneck in designing all-solid-state sodium-ion batteries, and outlines several testable predictions for future experimental validation.

25 ENERGY STORAGE↗
DOE OSTI2016

Exploring phase stability, electronic and mechanical properties of Ce–Pb intermetallic compounds using first-principles calculations

The phase stability, electronic and mechanical properties of Ce–Pb intermetallics have been investigated by using first-principles calculations. Five stable and four metastable phases of Ce–Pb intermetallics were verified. Among them, CePb{sub 2} has been confirmed as HfGa{sub 2}-type structure. For Ce{sub 5}Pb{sub 3}, the high pressure phase transformation from D8{sub m} to D8{sub 8} with trivalent Ce has been predicted to occur at P=1.2 GPa and a high temperature phase transformation has been predicted from D8{sub m} to D8{sub 8} with tetravalent Ce at 531.5 K. The calculated lattice constants of the five stable phases are in good agreement with experimental values. The electronic density of states, charge density and electron localization function of Ce{sub 3}Pb have been calculated, which indicated that the Ce and Pb show ionic behavior. The polycrystalline bulk modulus, shear modulus, Young's modulus, and Poisson's ratio are also estimated from the calculated single crystalline elastic constants. All of the calculated elastic constants satisfy mechanical stability criteria. The microhardness and mechanical anisotropy are predicted. The anisotropic nature of the Ce–Pb intermetallic compounds are demonstrated by the three-dimensional orientation dependent surfaces of Young's moduli and linear compressibility are also demonstrated. The longitudinal, transverse and average sound velocities and the Debye temperatures are also obtained in this work. The Ce{sub 3}Pb has the largest Debye temperature of 192.6 K, which means the Ce{sub 3}Pb has a highest melting point and high thermal conductivity than other compounds. - Graphical abstract: The convex hull plots of the enthalpies of formation for Ce–Pb binary systems calculated at 0 K. - Highlights: • The five stable and four metastable phases in the Ce–Pb binary system were predicted. • The crystal structure of CePb{sub 2} has been confirmed as HfGa{sub 2}-type.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Diffusion of alloying and fission atoms in α-U investigated by first-principles calculation

Stability and diffusion of small defect clusters containing alloying or fission atoms (“F” is used to represent both atoms) in an α-uranium (U) crystal are investigated using first-principles calculations. Here, results indicate that different stable defect structures are observed for an interstitial defect and a cluster (F n V m ) containing different alloying or fission atoms and vacancies. An interstitial defect is found to be most stable either at the center of a pyramid pentahedron or in a 〈010〉 mixed dumbbell configuration and the latter one is reported for the first time. Formation energy of a small F n V m cluster depends on the distribution of vacancies. Based on these stable defects, new migration energies and paths have been explored in this work. Anisotropic migration of an interstitial defect by jumping between nearest centers of two pyramid pentahedrons or jumping between two mixed U-Zr dumbbells has been suggested. Furthermore, a new migration-rotation mechanism has been explored for the first time for a FV 2 cluster, resulting in a 3D diffusion. Finally, the effect of substitutional Pu atoms on the migration of a FV 2 cluster suggests that optimizing the Pu concentration may prohibit the diffusion of some alloying or fission atoms, increasing the safe performance of metallic fuels.

3D diffusion↗
DOE OSTI2016

GPU acceleration of the Locally Selfconsistent Multiple Scattering code for first principles calculation of the ground state and statistical physics of materials

The Locally Self-consistent Multiple Scattering (LSMS) code solves the first principles Density Functional theory Kohn–Sham equation for a wide range of materials with a special focus on metals, alloys and metallic nano-structures. It has traditionally exhibited near perfect scalability on massively parallel high performance computer architectures. In this paper, we present our efforts to exploit GPUs to accelerate the LSMS code to enable first principles calculations of O(100,000) atoms and statistical physics sampling of finite temperature properties. We reimplement the scattering matrix calculation for GPUs with a block matrix inversion algorithm that only uses accelerator memory. Finally, using the Cray XK7 system Titan at the Oak Ridge Leadership Computing Facility we achieve a sustained performance of 14.5PFlop/s and a speedup of 8.6 compared to the CPU only code.

36 MATERIALS SCIENCE↗
DOE OSTI2015

Chemical expansion affected oxygen vacancy stability in different oxide structures from first principles calculations

We study the chemical expansion for neutral and charged oxygen vacancies in fluorite, rocksalt, perovskite and pyrochlores materials using first principles calculations. We show that the neutral oxygen vacancy leads to lattice expansion whereas the charged vacancy leads to lattice contraction. In addition, we show that there is a window of strain within which an oxygen vacancy is stable; beyond that range, the vacancy can become unstable. Using CeO2|ZrO2 interface structure as an example, we show that the concentration of oxygen vacancies can be manipulated via strain, and the vacancies can be preferentially stabilized. These results could serve as guiding principles in predicting oxygen vacancy stability in strained systems and in the design of vacancy stabilized materials.

Environmental Molecular Sciences Laboratory↗
DOE OSTI2016

Predictions of point defect, surface, and interface properties in semiconductors using first-principles calculations

The energetics, structures, and properties of lattice defects in semiconductors are discussed on the basis of predictions using first-principles calculations. New insights into the atomistic and electronic structure of point defects are obtained, including significant off-centering of Ti antisite defects and local octahedral rotation around O vacancies in SrTiO{sub 3}, both of which are accompanied by electron localization. Another example is the formation of a luminous dopant-vacancy complex in cubic BN. Band alignment at semiconductor surfaces and heterointerfaces is also discussed, with a focus on approximation dependence.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗