Search NASA⌕ Search

SEARCH · Search NASA

Results for “Fixed grid”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3

Binary black hole accretion from a circumbinary disk: Gas dynamics inside the central cavity

We present the results of two-dimensional (2D) hydrodynamical simulations of circumbinary disk accretion using the finite-volume code DISCO. This code solves the 2D viscous Navier-Stokes equations on a high-resolution moving mesh which shears with the fluid flow, greatly reducing advection errors in comparison with a fixed grid. We perform a series of simulations for binary mass ratios in the range 0.026 ≤ q ≤ 1.0, each lasting longer than a viscous time so that we reach a quasi-steady accretion state. In each case, we find that gas is efficiently stripped from the inner edge of the circumbinary disk and enters the cavity along accretion streams, which feed persistent 'mini disks' surrounding each black hole. We find that for q ≳ 0.1, the binary excites eccentricity in the inner region of the circumbinary disk, creating an overdense lump which gives rise to enhanced periodicity in the accretion rate. The dependence of the periodicity on mass ratio may provide a method for observationally inferring mass ratios from measurements of the accretion rate. We also find that for all mass ratios studied, the magnitude of the accretion onto the secondary is sufficient to drive the binary toward larger mass ratio. This suggests a mechanism for biasing mass-ratio distributions toward equal mass.

79 ASTRONOMY AND ASTROPHYSICS↗

Quantum Simulation of the First-Quantized Pauli-Fierz Hamiltonian

We provide an explicit recursive divide-and-conquer approach for simulating quantum dynamics and derive a discrete first-quantized nonrelativistic QED Hamiltonian based on the many-particle Pauli-Fierz Hamiltonian. We apply this recursive divide-and-conquer algorithm to this Hamiltonian and compare it to a concrete simulation algorithm that uses qubitization. Our divide-and-conquer algorithm, using lowest-order Trotterization, scales for fixed grid spacing as O ~ ( Λ N 2 η 2 t 2 / ϵ ) for grid size N , η particles, simulation time t , field cutoff Λ , and error ϵ . Our qubitization algorithm scales as O ~ ( N ( η + N ) ( η + Λ 2 ) t log ( 1 / ϵ ) ) . This shows that even a naive partitioning and low-order splitting formula can yield, through our divide-and-conquer formalism, superior scaling to qubitization for large Λ . We compare the relative costs of these two algorithms on systems that are relevant for applications such as the spontaneous emission of photons and the photoionization of electrons. We observe that for different parameter regimes, one method can be favored over the other. Finally, we give new algorithmic and circuit-level techniques for gate optimization, including a new way of implementing a group of multicontrolled- X gates that can be used for better analysis of circuit cost. Published by the American Physical Society 2024

Mukhopadhyay, Priyanka (ORCID:0000000164639100)↗

ObstacleSense: Low-Power Neuromorphic Vision for Corridor Obstacle Awareness in Low-Level ADAS

The automotive industry’s pursuit of Level 5 autonomy is constrained by substantial perception-compute power requirements, often reaching 1, 000 + watts in full autonomy stacks. Reducing this energy burden requires rethinking perception not only at the high-end autonomy level, but also at the foundational Advanced Driver Assistance Systems (ADAS) level where low-power, safety-critical sensing can have broad impact. Neuromorphic vision provides a promising starting point: HD Dynamic Vision Sensors (DVS) can operate below 100 mW at the sensor level by reporting only asynchronous brightness changes. However, low-power sensing alone is insufficient if downstream perception reintroduces dense, energy-intensive computation. In particular, many event-driven object-detection pipelines still rely on CNN backbones, while purely spiking alternatives often trade away accuracy or ignore deployment constraints. We introduce ObstacleSense, a highly compact, CNN-free hybrid ANN–SNN framework for Level 0–1 forward-corridor obstacle awareness. Instead of performing full-scene object detection with a convolutional feature backbone, ObstacleSense targets the safety-critical question of whether the ego corridor is occupied and how far the nearest obstacle is. The architecture combines polarity-conditioned event encoding, lightweight temporal spiking dynamics, axial spatial mixing, and coarse-to-fine range estimation within a regular fixed-grid compute pattern. This design avoids the dense CNN backbone commonly used in event-based detection while maintaining a small state footprint suitable for eventual small-FPGA deployment. Before hardware mapping, we evaluate the software implementation using a model-side power proxy derived from MACs, weight and activation traffic, and spiking state updates under shared FP16 assumptions. On simulated CARLA event corpora, the deployment-oriented model achieves 0.9464 objectness F1, 0.9978 grid-level mAP, and 0.8987 m distance Mean Absolute Error at an estimated 1.92 mW proxy cost, while maintaining performance on unseen generalization test sequences.

Johnson-Scott, Zac [ORNL]↗

SDE_quark

This program provides a fixed-grid quadrature algorithm to compute integrals in the self-energy of the quark propagator within the Maris-Tandy model. The quark propagator both on t he spacelike real axis and at complex-valued momenta is determined from its Schwinger-Dyson equation (SDE). We first apply an iterative solver to find the quark propagator on the spacelike real axis. The propagator at complex-valued momenta is then computed from its self-energy based on this solution, where demanding integrals are encountered. In order to compute of these integrals, we apply customized variable transformations for the radial integral after subtracting the asymptotics. We subsequently apply an optional compound of quadrature rules for the angular integral.

Jia, Shaoyang↗

New Capabilities for Sampling Tools

This report will discuss new capabilities that have been added to the sample.py and uniform_sampler.py codes. The codes have been updated to allow for both log-uniform sampling and categorical variables. The categorical variables do not have to be numeric. The different values for a categorical variable are specified in a limits file by having spaces between them. The difference between sample.py and uniform_sampler.py is that sample.py is for generating random samples and uniform_sampler.py is for generating samples or points on a fixed grid. After sourcing a file to set the environment, execute the codes with the commands: sample.py and uniform sampler.py .

97 MATHEMATICS AND COMPUTING↗

Numerical Evidence of Multiple Solutions for the Reynolds-Averaged Navier–Stokes Equations

In this paper, evidence is presented for the existence of multiple solutions of Reynolds-averaged Navier–Stokes equations with the one-equation Spalart–Allmaras and two-equation Wilcox $k-ω$ turbulence models on fixed grids in three dimensions and how they were obtained is described. The two major configurations considered are an “academic” extruded two-dimensional airfoil geometry and the trap wing test case. The observed appearance of the multiple solutions seems to be closely related to smooth body separation (sometimes massive) routinely observed in flows over high-lift configurations, especially near stall angles of attack. The results are obtained and cross-verified with two stabilized finite-element codes (streamwise upwind Petrov–Galerkin), which provide residual converged results for complex flows with second-order discretizations. In the paper, the ways multiple solutions have been obtained are described, including such obvious ones as providing a different initial guess to the steady-state solver as well as somewhat unexpected (in this context) techniques of using implicit residual smoothing while time marching to steady state. The phenomenon of the so-called pseudosolutions is also discussed, which is loosely defined as solutions to the discrete system of equations having “sharp” convergence behavior (sometimes up to six to seven orders of the relative residual reduction), which fail to achieve the stronger, machine-zero convergence criterion. Some numerical observations are also presented on the sensitivity of the obtained multiple solutions to the discretization and grid perturbations.

Engineering↗

Description of a landing site indicator (LASI) for light aircraft operation

An experimental cockpit mounted head-up type display system was developed and evaluated by LaRC pilots during the landing phase of light aircraft operations. The Landing Site Indicator (LASI) system display consists of angle of attack, angle of sideslip, and indicated airspeed images superimposed on the pilot's view through the windshield. The information is made visible to the pilot by means of a partially reflective viewing screen which is suspended directly in frot of the pilot's eyes. Synchro transmitters are operated by vanes, located at the left wing tip, which sense angle of attack and sideslip angle. Information is presented near the center of the display in the form of a moving index on a fixed grid. The airspeed is sensed by a pitot-static pressure transducer and is presented in numerical form at the top center of the display.

Fuller, H. V.↗

Advantages of multigrid methods for certifying the accuracy of PDE modeling

Numerical techniques for assessing and certifying the accuracy of the modeling of partial differential equations (PDE) to the user's specifications are analyzed. Examples of the certification process with conventional techniques are summarized for the three dimensional steady state full potential and the two dimensional steady Navier-Stokes equations using fixed grid methods (FG). The advantages of the Full Approximation Storage (FAS) scheme of the multigrid technique of A. Brandt compared with the conventional certification process of modeling PDE are illustrated in one dimension with the transformed potential equation. Inferences are drawn for how MG will improve the certification process of the numerical modeling of two and three dimensional PDE systems. Elements of the error assessment process that are common to FG and MG are analyzed.

Forester, C. K.↗

Refined numerical solution of the transonic flow past a wedge

A numerical procedure combining the ideas of solving a modified difference equation and of adaptive mesh refinement is introduced. The numerical solution on a fixed grid is improved by using better approximations of the truncation error computed from local subdomain grid refinements. This technique is used to obtain refined solutions of steady, inviscid, transonic flow past a wedge. The effects of truncation error on the pressure distribution, wave drag, sonic line, and shock position are investigated. By comparing the pressure drag on the wedge and wave drag due to the shocks, a supersonic-to-supersonic shock originating from the wedge shoulder is confirmed.

Liang, S.-M.↗

Discrete element weld model, phase 2

A numerical method was developed for analyzing the tungsten inert gas (TIG) welding process. The phenomena being modeled include melting under the arc and the flow in the melt under the action of buoyancy, surface tension, and electromagnetic forces. The latter entails the calculation of the electric potential and the computation of electric current and magnetic field therefrom. Melting may occur at a single temperature or over a temperature range, and the electrical and thermal conductivities can be a function of temperature. Results of sample calculations are presented and discussed at length. A major research contribution has been the development of numerical methodology for the calculation of phase change problems in a fixed grid framework. The model has been implemented on CHAM's general purpose computer code PHOENICS. The inputs to the computer model include: geometric parameters, material properties, and weld process parameters.

Prakash, C.↗

A graphics package for meteorological data, version 1.5

A plotting package has been developed to simplify the task of plotting meteorological data. The calling sequences and examples of high level yet flexible routines which allow contouring, vectors and shading of cylindrical, polar, orthographic and Mollweide (egg) projections are given. Routines are also included for contouring pressure-latitude and pressure-longitude fields with linear or log scales in pressure (interpolation to fixed grid interval is done automatically). Also included is a fairly general line plotting routine. The present version (1.5) produces plots on WMS laser printers and uses graphics primitives from WOLFPLOT.

Moorthi, Shrinivas↗

A numerical analysis of Stefan problems for generalized multi-dimensional phase-change structures using the enthalpy transforming model

An enthalpy transforming scheme is proposed to convert the energy equation into a nonlinear equation with the enthalpy, E, being the single dependent variable. The existing control-volume finite-difference approach is modified so it can be applied to the numerical performance of Stefan problems. The model is tested by applying it to a three-dimensional freezing problem. The numerical results are in agreement with those existing in the literature. The model and its algorithm are further applied to a three-dimensional moving heat source problem showing that the methodology is capable of handling complicated phase-change problems with fixed grids.

Cao, Yiding↗

Development of a time-dependent incompressible Navier-Stokes solver based on a fractional-step method

The development, validation and application of a fractional step solution method of the time-dependent incompressible Navier-Stokes equations in generalized coordinate systems are discussed. A solution method that combines a finite-volume discretization with a novel choice of the dependent variables and a fractional step splitting to obtain accurate solutions in arbitrary geometries was previously developed for fixed-grids. In the present research effort, this solution method is extended to include more general situations, including cases with moving grids. The numerical techniques are enhanced to gain efficiency and generality.

Rosenfeld, Moshe↗

Finite element simulations involving simultaneous multiple interface fronts in phase change problems

The present paper describes the simulation of phase change problems involving simultaneous multiple interface fronts employing the finite element method. Much of the past investigations employing finite elements have been restricted to primarily a single phase change situation. The existence of more than one phase, that is, the presence of multiple phase fronts poses certain challenges and further complications. However, the results provide a very interesting thermal behavior for this class of problems. In this paper, attention is focused on fixed grid methods and the trapezoidal family of one-step methods using the enthalpy formulations. Illustrative examples which handle simultaneous multiple fronts in phase change problems are presented.

Ouyang, Tianhong↗

Computational methods for shock waves in three-dimensional supersonic flow

A central artificial-viscosity and an upwind-biased difference method are contrived to solve the Euler equations for flowfields over typical spacecrafts. The spatial discretization is based on either nodal or cell-vertex formulation in the domain extending from free stream to the end of the vehicle. The outer boundary is treated as a bow shock in the first method but is placed in the free stream in the second, which captures both bow and internal shocks using an approximate Riemann solver based on high-order extrapolation to the cell face. These methods were tested for the Shuttle and Hermes orbiters at wind-tunnel conditions and angles of attack ranging from 0 to 60 deg. The artificial-viscosity method incorporated with a shock-fitting procedure shows smeared crossflow and wing-shock positions and required 15 percent more CPU per node than the upwind method. Greater flexibility and robustness is demonstrated by the latter on a fixed grid for all cases considered.

Li, Chien-Peng↗

Applications of multigrid software in the atmospheric sciences

Elliptic partial differential equations from different areas in the atmospheric sciences are efficiently and easily solved utilizing the multigrid software package named MUDPACK. It is demonstrated that the multigrid method is more efficient than other commonly employed techniques, such as Gaussian elimination and fixed-grid relaxation. The efficiency relative to other techniques, both in terms of storage requirement and computational time, increases quickly with grid size.

Adams, J.↗

Finite element developments for two dimensional multiple-interface phase change problems

Finite element developments for multiple phase change problems in two-dimensional models are presented for the first time. The enthalpy method is used to simulate latent heat release in conjunction with fixed grid techniques. An unconditionally stable implicit method is used for the time integration. The effects of boundary conditions and the different phase regions on the multiple phase front developments are examined for numerous examples. Discussions and conclusions are appropriately addressed.

Ouyang, Tianhong↗

A finite element analysis of the freeze/thaw behavior of external artery heat pipes

A two-dimensional finite element model was used to determine the freeze/thaw characteristics of an external artery heat pipe. During startup, the working fluid, which was located in the liquid channel and the circumferential wall grooves, experienced a phase transformation from a solid to a liquid state. The transient heat conduction equations with moving interfacial conditions were solved using the appropriate initial boundary conditions. The modelling results include the cross-sectional temperature distribution and the interfacial or melt front position as a function of time. A fixed grid approach was adopted in the model for the phase-change process during thawing of frozen working fluid. The interfacial position between the liquid and solid regions was found by balancing the latent heat caused by interfacial movement with the heat addition or extraction at the related grid points.

Lu, X. J.↗