Search NASA⌕ Search

SEARCH · Search NASA

Results for “Fluorescent mechanisms”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
NASA NTRS2004

Optimizing environmental conditions for mass application of mechano-dwarfing stimuli to Arabidopsis

Obtaining uniform mechano-dwarfing of Arabidopsis thaliana (L.) Heynh. seedlings within dense plantings is problematic. Alternative forms of mechano-stimulation were applied to seedlings in effort to obtain uniform growth reduction compared with undisturbed controls in both greenhouse and controlled growth environments. Arabidopsis grown under low photosynthetic photon flux (PPF) artificial light grew upright with limited leaf expansion, which enhanced mechano-responsiveness compared to that of rosette-growing plants under filtered sunlight or high PPF artificial light. Hypocotyls of seedlings grown at PPFs > 60 micromoles m-2 s-1 elongated less and had 6% less sensitivity to mechanical stress than seedlings grown at PPFs < 60 micromoles m-2 s-1. Fluorescent lamps alone (F) or fluorescent plus incandescent (F+I) lamps were compared for seedling responses to mechanical stress. Under F lighting, hypocotyl elongation was reduced 25% to 40% by twice-daily brush or plate treatments, and brushed seedlings exhibited more growth reduction than did plate treatments. Seedlings grown under F+I lamps exhibited similar stress-induced growth reduction compared to seedlings grown under F only, but stressed F+I seedlings lodged to a greater extent due to excessive hypocotyl elongation. Temperature-response studies using standardized F-only lighting indicated increased hypocotyl elongation but decreased leaf expansion, and decreased mechano-responsivity to brushing over the temperature range from 20 to 28 degrees C. Daylength studies indicated similar degrees of mechano-inhibition of hypocotyl elongation over the daylength range of 12, 16, 20, and 24 hours, whereas fresh weight of stressed seedling shoots declined compared to controls. A combination of environmental growth parameters that give repeatable, visual mechanical dwarfing of Arabidopsis include low-PPF fluorescent lighting from 55 to 60 micromoles m-2 s-1, ambient temperatures from 22 to 25 degrees C, and twice-daily brush treatments.

NASA Discipline Life Support Systems↗
NASA NTRS1991

Fiber optic-based biosensor

The NRL fiber optic biosensor is a device which measures the formation of a fluorescent complex at the surface of an optical fiber. Antibodies and DNA binding proteins provide the mechanism for recognizing an analyze and immobilizing a fluorescent complex on the fiber surface. The fiber optic biosensor is fast, sensitive, and permits analysis of hazardous materials remote from the instrumentation. The fiber optic biosensor is described in terms of the device configuration, chemistry for protein immobilization, and assay development. A lab version is being used for assay development and performance characterization while a portable device is under development. Antibodies coated on the fiber are stable for up to two years of storage prior to use. The fiber optic biosensor was used to measure concentration of toxins in the parts per billion (ng/ml) range in under a minute. Immunoassays for small molecules and whole bacteria are under development. Assays using DNA probes as the detection element can also be used with the fiber optic sensor, which is currently being developed to detect biological warfare agents, explosives, pathogens, and toxic materials which pollute the environment.

Ligler, Frances S.↗
NASA NTRS2016

Full Field X-Ray Fluorescence Imaging Using Micro Pore Optics for Planetary Surface Exploration

Many planetary surface processes leave evidence as small features in the sub-millimetre scale. Current planetary X-ray fluorescence spectrometers lack the spatial resolution to analyse such small features as they only provide global analyses of areas greater than 100 mm(exp 2). A micro-XRF spectrometer will be deployed on the NASA Mars 2020 rover to analyse spots as small as 120m. When using its line-scanning capacity combined to perpendicular scanning by the rover arm, elemental maps can be generated. We present a new instrument that provides full-field XRF imaging, alleviating the need for precise positioning and scanning mechanisms. The Mapping X-ray Fluorescence Spectrometer - "Map-X" - will allow elemental imaging with approximately 100μm spatial resolution and simultaneously provide elemental chemistry at the scale where many relict physical, chemical and biological features can be imaged in ancient rocks. The arm-mounted Map-X instrument is placed directly on the surface of an object and held in a fixed position during measurements. A 25x25 mm(exp 2) surface area is uniformly illuminated with X-rays or alpha-particles and gamma-rays. A novel Micro Pore Optic focusses a fraction of the emitted X-ray fluorescence onto a CCD operated at a few frames per second. On board processing allows measuring the energy and coordinates of each X-ray photon collected. Large sets of frames are reduced into 2d histograms used to compute higher level data products such as elemental maps and XRF spectra from selected regions of interest. XRF spectra are processed on the ground to further determine quantitative elemental compositions. The instrument development will be presented with an emphasis on the characterization and modelling of the X-ray focussing Micro Pore Optic. An outlook on possible alternative XRF imaging applications will be discussed.

micro-XRF spectrometer↗
NASA NTRS2019

Achieving Improved Reliability with Failure Analysis

Reliability is the ability of a product to properly function, within specified performance limits, for a specified period of time, under the life cycle application conditions. Failure analysis is a vital tool in the effort to ensure reliability of electronic products and systems throughout their product lifecycle. Today, organizations involved in activities within the electronics supply chain are facing new challenges, not just from complex assembly styles, harsher lifecycle environments, and sophisticated supply chains, but also from customers who are demanding a quicker turn-around. Unfortunately, root cause failure analysis is often performed incompletely, leading to a poor understanding of failure mechanisms and causes and, customer dissatisfaction due to recurring failures. The PDC (Professional Development Course) starts with an introduction to reliability concepts, physics of failure and an overview of failure mechanisms that affect PCBs (Printed Circuit Boards), PCBAs (Printed Circuit Board Assembly) and components. The PDC then dives into root cause hypothesizing techniques (Pareto, FMEA (Failure Modes and Effects Analysis), fishbone (Cause-And-Effect Diagram), FTA (Fault Tree Analysis)), non-destructive and destructive analysis and, materials characterization will be discussed. Numerous failure analysis case studies will be used to illustrate the techniques and analysis principles to arrive at the root cause(s) of field failures on printed circuit boards, active components, and assemblies. What Attendees will Learn: Topics include: Overview of Reliability Concepts Failure mechanisms of electronic products Root cause analysis Failure analysis techniques -Non-destructive techniques (optical, CSAM (Confocal Scanning Electron Microscopy) etc.) -Destructive analysis (DPA (Destructive Physical Analysis), Decap (Decapsulation), FIB (Focused Ion Beam) etc.) -Materials characterization (XRF (X-Ray Fluorescence) , EDS (Error Detection Sequential), TMA/DSC (Thermal Mechanical Analysis/Differential Scanning Calorimetry) etc.)

PCB quality↗
NASA NTRS1984

Results from the X-ray polychromator on SMM

Observations of the soft X-ray emitting plasma by means of the X-Ray Polychromator (XRP) on the Solar Maximum Mission satellite are described. The scientific advances achieved by use of the XRP are in the areas of: (1) flare morphology, (2) spectroscopy and plasma diagnostics, (3) chromospheric evaporation and the physics of flare loops, (4) studies of the microwave emission mechanisms of active regions, (5) the fluorescent excitation of Fe II K-alpha radiation, (6) measurement of variations of calcium abundance for X-ray plasmas, and (7) soft X-ray observations of spray transients. The findings in each of these areas are discussed.

Culhane, J. L.↗
NASA NTRS1999

Novel optical methodologies in studying mechanical signal transduction in mammalian cells

For the last 3 decades evidence has been accumulating that some types of mammalian cells respond to their mechanically active environment by altering their morphology, growth rate, and metabolism. The study of such responses is very important in understanding, physiological and pathological conditions ranging from bone formation to atherosclerosis. Obtaining this knowledge has been the goal for an active research area in bioengineering termed cell mechanotransduction. The advancement of optical methodologies used in cell biology research has given the tools to elucidate cellular mechanisms that would otherwise be impossible to visualize. Combined with molecular biology techniques, they give engineers invaluable tools in understanding the chemical pathways involved in mechanotransduction. Herein we briefly review the current knowledge on mechanical signal transduction in mammalian cells, focusing on the application of novel optical techniques in the ongoing research.

NASA Discipline Cell Biology↗
NASA NTRS1980

Excitation mechanisms for the unidentified infrared emission features

Infrared and radio observations of various objects are analyzed to put observational constraints on the mechanism which gives rise to the unidentified emission features at 3.3, 3.4, 6.2, 7.7, 8.6, and 11.3 microns. The results show that gas-grain collisions or fluorescence is not likely to be the excitation mechanism responsible for the observed features. Thermal emission by dust is reanalyzed and it is concluded that this mechanism can explain the emission features. A simple model in which the emission features arise in a population of small, hot, interstellar grains is constructed. These grains are very efficient radiators, and the emitting materials only need be a minor grain constituent to provide the power that is emitted in the features. The model offers, therefore, a simple explanation for the absence of these features in absorption.

Dwek, E.↗
NASA NTRS2003

The endomembrane requirement for cell surface repair

The capacity to reseal a plasma membrane disruption rapidly is required for cell survival in many physiological environments. Intracellular membrane (endomembrane) is thought to play a central role in the rapid resealing response. We here directly compare the resealing response of a cell that lacks endomembrane, the red blood cell, with that of several nucleated cells possessing an abundant endomembrane compartment. RBC membrane disruptions inflicted by a mode-locked Ti:sapphire laser, even those initially smaller than hemoglobin, failed to reseal rapidly. By contrast, much larger laser-induced disruptions made in sea urchin eggs, fibroblasts, and neurons exhibited rapid, Ca(2+)-dependent resealing. We conclude that rapid resealing is not mediated by simple physiochemical mechanisms; endomembrane is required.

NASA Discipline Cell Biology↗
NASA NTRS2003

Intracellular stress tomography reveals stress focusing and structural anisotropy in cytoskeleton of living cells

We describe a novel synchronous detection approach to map the transmission of mechanical stresses within the cytoplasm of an adherent cell. Using fluorescent protein-labeled mitochondria or cytoskeletal components as fiducial markers, we measured displacements and computed stresses in the cytoskeleton of a living cell plated on extracellular matrix molecules that arise in response to a small, external localized oscillatory load applied to transmembrane receptors on the apical cell surface. Induced synchronous displacements, stresses, and phase lags were found to be concentrated at sites quite remote from the localized load and were modulated by the preexisting tensile stress (prestress) in the cytoskeleton. Stresses applied at the apical surface also resulted in displacements of focal adhesion sites at the cell base. Cytoskeletal anisotropy was revealed by differential phase lags in X vs. Y directions. Displacements and stresses in the cytoskeleton of a cell plated on poly-L-lysine decayed quickly and were not concentrated at remote sites. These data indicate that mechanical forces are transferred across discrete cytoskeletal elements over long distances through the cytoplasm in the living adherent cell.

NASA Discipline Cell Biology↗
NASA NTRS1997

Pulmonary blood flow distribution in sheep: effects of anesthesia, mechanical ventilation, and change in posture

BACKGROUND: Recent studies providing high-resolution images of pulmonary perfusion have questioned the classical zone model of pulmonary perfusion. Hence the present work was undertaken to provide detailed maps of regional pulmonary perfusion to examine the influence of anesthesia, mechanical ventilation, and posture. METHODS: Pulmonary perfusion was analyzed with intravenous fluorescent microspheres (15 microm) in six sheep studied in four conditions: prone and awake, prone with pentobarbital-anesthesia and breathing spontaneously, prone with anesthesia and mechanical ventilation, and supine with anesthesia and mechanical ventilation. Lungs were air dried at total lung capacity and sectioned into approximately 1,100 pieces (about 2 cm3) per animal. The pieces were weighed and assigned spatial coordinates. Fluorescence was read on a spectrophotometer, and signals were corrected for piece weight and normalized to mean flow. Pulmonary blood flow heterogeneity was assessed using the coefficient of variation of flow data. RESULTS: Pentobarbital anesthesia and mechanical ventilation did not influence perfusion heterogeneity, but heterogeneity increased when the animals were in the supine posture (P < 0.01). Gravitational flow gradients were absent in the prone position but present in the supine (P < 0.001 compared with zero). Pulmonary perfusion was distributed with a hilar-to-peripheral gradient in animals breathing spontaneously (P < 0.05). CONCLUSIONS: The influence of pentobarbital anesthesia and mechanical ventilation on pulmonary perfusion heterogeneity is small compared with the effect of changes in posture. Analysis of flow gradients indicate that gravity plays a small role in determining pulmonary blood flow distribution.

NASA Discipline Cardiopulmonary↗
NASA NTRS1981

The carbon monoxide fourth positive bands in the Venus dayglow. I - Synthetic spectra

Recent observations of the Venus dayglow spectrum from 1200 to 1800 A are discussed, and identifications of the CO4+ bands are given using synthetic spectra. The main excitation mechanism is found to be resonant and fluorescent scattering of solar radiation, so the theory for this process is covered in some detail. A synthetic fluorescence spectrum is generated with the aid of high-resolution solar flux data, and emission rate factors are calculated. The influence of solar emission line excitation on this spectrum is demonstrated. In particular, it is shown that the uncertainties in interpreting the Venus dayglow are overcome by the identification of CO4+ bands in the v prime = 14 progression resulting from the fluorescent scattering by CO of solar Lyman alpha radiation.

Durrance, S. T.↗
NASA NTRS1986

The dayglow of the O2 atmospheric band system

The dayglow of the O2 atmospheric O2(1Sigma) band system has been simulated by taking into account the three main production mechanisms of the O2(1Sigma) state resonance fluorescence, a photochemical term due to quenching of O(1D), and a pure chemical process. Values of the emission rate, which are involved in the resonant scattering of the O2 atmospheric bands (A, B, and gamma), have been obtained as a function of altitude (0-120 km) and solar zenith angle using a line-by-line calculation. The values of the emission rate, along with updated rate coefficients, have been used in the calculation of the production rate of O2(1Sigma) and the volume emission rate of the (O2 1Sigma, v prime = 0)-(O2 3Sigma, v double prime = 0) transition. The results of these calculations are compared to observational measurements and are found to be in excellent agreement.

Bucholtz, A.↗
NASA NTRS1985

Emission features in the 4-13 micron spectra of the reflection nebulae NGC 7023 and NGC 2023

Spectroscopy from 4 to 13 microns of the visual reflection nebulae NGC 7023 and NGC 2023 has been obtained. These data, together with previous work from 1 to 4 microns, show that the spectra of these sources consist of a relatively flat continuum from 1 to 13 microns and six emission features at 3.3, 3.4, 6.2, 7.7, 8.6, and 11.3 microns. The observations rule out equilibrium thermal emission for the features and continuum in reflection nebulae, and point toward a nonequilibrium emission mechanism such as thermal emission from thermally fluctuating small grains or fluorescence from large molecules. The similarity of the emission feature spectra in reflection nebulae to those in other sources suggests a universal emission mechanism, thus implying nonequilibrium emission mechanisms in other sources.

Sellgren, K.↗
NASA NTRS2017

DART: Recent Advances in Remote Sensing Data Modeling With Atmosphere, Polarization, and Chlorophyll Fluorescence

To better understand the life-essential cycles and processes of our planet and to further develop remote sensing (RS) technology, there is an increasing need for models that simulate the radiative budget (RB) and RS acquisitions of urban and natural landscapes using physical approaches and considering the three-dimensional (3-D) architecture of Earth surfaces. Discrete anisotropic radiative transfer (DART) is one of the most comprehensive physically based 3-D models of Earth-atmosphere radiative transfer, covering the spectral domain from ultraviolet to thermal infrared wavelengths. It simulates the optical 3-DRB and optical signals of proximal, aerial, and satellite imaging spectrometers and laser scanners, for any urban and/or natural landscapes and for any experimental and instrumental configurations. It is freely available for research and teaching activities. In this paper, we briefly introduce DART theory and present recent advances in simulated sensors (LiDAR and cameras with finite field of view) and modeling mechanisms (atmosphere, specular reflectance with polarization and chlorophyll fluorescence). A case study demonstrating a novel application of DART to investigate urban landscapes is also presented.

Gastellu-Etchegorry, Jean-Phil↗
NASA NTRS1976

H2O(+) ions in comets: Comet Kohoutek (1973f) and comet Bradfield (1974b)

The image tube Cassegrain slit spectra of comet Kohoutek and Bradfield calibrated and reduced to relative intensities are discussed. Monochromatic changes in the surface brightness for various neutral and ionized molecules are determined. The intensities of C2 and CN decreased approximately four times faster than the intensity change for the H2O(+) features. It is shown that the excitation mechanism for the observed H2O(+) bands is by fluorescent scattering of the incident solar radiation. The effects of solar activity on the photoionization rate of H2O in a comet are discussed. Observations of another bright comet at the time of maximum solar activity are needed to determine changes in band intensities of comet tail ions due to solar activity.

Wehinger, P.↗
NASA NTRS1988

Indirect IUE observation of O VI from photoexcited fluorescence lines of Fe II, present in the spectrum of RR Telescopii

A new, highly excited level of Fe II at 13.7 eV has been established by means of six lines in the laboratory spectrum below 2000 A. Confirming transitions appear in the infrared region. Four of the ultraviolet lines coincide with previously unidentified lines in the IUE spectrum of RR Tel reported by Penston et al. in 1983. One of the remaining UV lines coincides with the resonance line of O VI at 1032 A, outside the range of the IUE. This suggests that the new FE II level is selectively photoexcited by O VI in RR Tel, resulting in the strong fluorescence lines observed. This case of a Bowen mechanism provides an indirect observation of O VI, important for diagnostics of, e.g., symbiotic stars.

Johansson, Sveneric↗
NASA NTRS1993

Near-infrared and ultraviolet spectrophotometry of the young planetary nebula Hubble 12

The young planetary nebula Hubble 12 is observed using near-IR and UV spectrophotometry. The brightness of the O I lines, which is greater than in any other planetary nebula yet measured, indicates that fluorescent excitation by stellar continuum is the principal mechanism generating these lines. Extinction, electron density, and electron temperature are determined using infrared measurements combined with UV data and published optical observations. The range in extinction, density, and temperature implies that, within the ionized region, pockets of emission with distinctly different conditions exist. Logarithmic abundances for helium, oxygen, and sulfur are presented.

Rudy, Richard J.↗