Search NASA⌕ Search

SEARCH · Search NASA

Results for “Ford”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
DOE OSTI2026

Seasonality and Declining Intensity of Methane Emissions from the Permian and Nearby US Oil and Gas Basins

We quantify weekly methane emissions and trends from oil and gas production in the US Permian Basin for 2019-2023, and in nearby basins for 2022-2023, by analytical inversion of Tropospheric Monitoring Instrument (TROPOMI) satellite observations with the Integrated Methane Inversion (IMI) at 25 km resolution. Permian oil and gas emissions averaged 4.0 ± 1.1 Tg a-1 over 2019-2023, with large seasonal variation but little interannual variability. Methane intensity fell from 5.2 to 3.2% as production surged. Intensity in the New Mexico Permian fell from 4.5 to 2.1%, approaching the state's 2026 target of <2%. Emissions were on average 50 ± 10% higher in winter than summer, which we corroborate with Permian Basin Tower Network measurements, Insight M aircraft data, and GHGSat satellite observations. This seasonality may be driven in part by higher winter emissions from liquid storage tanks due to decreased separator efficiency in cold conditions. Similar but weaker seasonality along with decreasing emissions and intensities is found in weekly inversions for the Anadarko, Barnett, Eagle Ford, and Haynesville basins in 2022-2023. Our work suggests that better weatherization of oil and gas facilities could significantly reduce methane emissions.

Permian↗
DOE OSTI2025

Experimental Characterization of Hydrogen Diffusion in Shale Rocks for Geologic Storage Applications

As global energy systems undergo a transition to cleaner alternatives, geologic hydrogen storage has emerged as a promising solution for large-scale energy storage. A critical factor in determining the feasibility of this approach is the effectiveness of caprock formations, such as shale, in preventing hydrogen migration. This study investigates the diffusion behavior of hydrogen through shale to assess its suitability as a caprock for geologic hydrogen storage. Using a novel double-seal core holder design and a through-diffusion apparatus, hydrogen diffusion was measured through shale rock from the Eagle Ford and Wolfcamp Formations under dry conditions. These measurements were complemented by microstructural and mineralogical analyses using low-pressure nitrogen adsorption and X-ray diffraction. The effective diffusion coefficient of hydrogen in these shale caprocks ranged from 2.51 × 10 –8 to 9.85 × 10 –8 m 2 /s. Notably, we observed that the diffusion behavior was more related to the pore network structure and could not be attributed to differences in the total pore volume between shale types alone. Here, to further understand the role of pore network complexity, a fractal pore model was developed to correlate tortuosity with the fractal dimension of the pore structure (a measure of pore network complexity). The proposed model closely matched tortuosity values obtained from diffusion experiments, outperforming existing theoretical tortuosity–porosity correlations. These findings provide key quantitative parameters needed to assess the feasibility of geologic hydrogen storage as well as insights that can be applied to hydrogen storage in a range of geologic formations.

08 HYDROGEN↗
DOE OSTI2019

Collapse of Reacted Fracture Surface Decreases Permeability and Frictional Strength

Abstract Geochemical and geomechanical perturbations of the subsurface caused by the injection of fluids present risks of leakage and seismicity. This study investigated how acidic fluid flow affects hydraulic and frictional properties of fractures using experiments with 3.8‐cm‐long specimens of Eagle Ford shale, a laminated shale with carbonate‐rich strata. In low‐pressure flow cells, one set of samples was exposed to acidic brine and another set was exposed to neutral brine. X‐ray computed tomography and energy‐dispersive X‐ray spectroscopy revealed that samples exposed to acidic brine were calcite‐depleted and had developed a porous altered layer, while the other set showed no evidence of alteration. After reaction, samples were compressed and sheared in a triaxial cell that supplied normal stress and differential pore pressure at prescribed sliding velocities, independently measuring friction and permeability. During the initial compression, the porous altered layer collapsed into fine particles that filled the fracture. This effectively impeded flow and sealed the fracture, resulting in fracture permeability to decrease 1 to 2 orders of magnitude relative to the unaltered fractures. This is a favorable outcome in subsurface applications where the goal is to reduce leakage risks. However, during shear the reacted fracture had lower frictional strength because the fine‐grained particles in the collapsed layer prevented the formation of interlocking microasperities. Therefore, coupled geochemical and geomechanical processes that could favorably seal fractures could also increase the likelihood of induced seismicity. These findings have important implications for geological carbon sequestration, pressurized fluid energy storage, geothermal energy, and other subsurface technologies.

58 GEOSCIENCES↗
DOE OSTI2023

Source Characterization of Volatile Organic Compounds at Carlsbad Caverns National Park

Carlsbad Caverns National Park (CAVE), located in southeastern New Mexico, experiences elevated ground-level ozone (O 3 ) exceeding the National Ambient Air Quality Standard (NAAQS) of 70 ppbv. It is situated adjacent to the Permian Basin, one of the largest oil and gas (O&G) producing regions in the US. In 2019, the Carlsbad Caverns Air Quality Study (CarCavAQS) was conducted to examine impacts of different sources on ozone precursors, including nitrogen oxides (NO x ) and volatile organic compounds (VOCs). Here, we use positive matrix factorization (PMF) analysis of speciated VOCs to characterize VOC sources at CAVE during the study. Seven factors were identified. Three factors composed largely of alkanes and aromatics with different lifetimes were attributed to O&G development and production activities. VOCs in these factors were typical of those emitted by O&G operations. Associated residence time analyses (RTA) indicated their contributions increased in the park during periods of transport from the Permian Basin. These O&G factors were the largest contributor to VOC reactivity with hydroxyl radicals (62%). Two PMF factors were rich in photochemically generated secondary VOCs; one factor contained species with shorter atmospheric lifetimes and one with species with longer lifetimes. RTA of the secondary factors suggested impacts of O&G emissions from regions farther upwind, such as Eagle Ford Shale and Barnett Shale formations. The last two factors were attributed to alkenes likely emitted from vehicles or other combustion sources in the Permian Basin and regional background VOCs, respectively.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

𝑅-matrix analysis of 22 Ne states populated in 18 O ⁡(𝛼,𝛼) resonant elastic scattering

The properties of resonances in the 18 O + 𝛼 interaction are important for analyses of astrophysical processes and for understanding of the development of the 𝛼-cluster structure with addition of neutrons to 4N nuclei. Previous high-energy resolution measurements have not been treated using the contemporary 𝑅-matrix approach. We have performed an 𝑅-matrix analysis of the resonant data [D. Powers, J. K. Bair, J. L. C. Ford, Jr., and H. B. Willard, Phys. Rev. 134, B1237 (1964)] and obtained new data on 15 levels in the excitation region of 11.7–12.5 MeV 22 Ne. It appears that the model calculations did not predict the observed tendency in the 20–22 Ne 𝛼 clustering. This paper is the first step of our program of investigation of the 22 Ne spectrum in resonant reactions.

6 ≤ A ≤ 19↗
DOE OSTI2020

Circular economy framework for automobiles: Closing energy and material loops

Abstract Corporations, including automotive manufacturers, are increasingly exploring extended circular economy strategies as a means to enhance the sustainability of their products. The circular economy paradigm focuses on reducing nonrenewable materials and energy, promoting renewable feedstocks and energy, and keeping products/materials in use across the life cycle of a system. As such, life cycle environmental burdens associated with vehicle manufacturing, use, and disposal could potentially be reduced through circular economy strategies; however, no such comprehensive circular economy framework currently exists for the automotive industry. We develop the first circular economy schematic of automobiles, derived from the Ellen MacArthur Foundation's framework. Further, we characterize the current automotive circular economy using metrics of renewable energy and recycled materials. Specifically, for current U.S. average sedans, we find that internal combustion engine vehicles (ICEVs) use ∼6% renewable life cycle primary energy and 27% recycled materials; for battery electric vehicles (BEVs), these measures are ∼8% and 21%, respectively. On a vehicle‐miles‐traveled basis, BEVs use ∼47% less nonrenewable life cycle primary energy than ICEVs, highlighting the importance of electrification as a strategy for automotive manufacturers to reduce environmental burdens. Our proposed circular economy framework is then applied to Ford Motor Company's sustainability programs and initiatives as an example. This schematic aims to provide a starting point for the automotive industry to operationalize circular economy strategies, the application of which could advance its overall sustainability performance.

Aguilar Esteva, Laura C.↗
DOE OSTI2022

Use of Mini-CT Specimens for Fracture Toughness Characterization of Irradiated Highly Embrittled Weld

In the 1990’s, the Heavy Section Steel Irradiation Program at the ORNL performed investigation of the shape of the fracture toughness master curve for reactor pressure vessel steel highly embrittled because of irradiation exposure. A radiation-sensitive reactor pressure vessel (RPV) weld with intentionally enhanced copper content, designated KS-01, has been characterized in terms of static initiation (KJc) and Charpy impact toughness in the unirradiated and irradiated conditions. The objective of this original project was to investigate the ability of highly embrittled material to maintain the shape of the unirradiated transition fracture toughness curve, as well as to examine the ability of the Charpy 41-J shift to predict the fracture toughness shift at such high level of embrittlement. Irradiation of this weld was performed at the University of Michigan Ford Reactor in the new HSSI irradiation-anneal-reirradiation (IAR) facility. Broken specimens from that project have been saved in ORNL storage. To verify applicability of Mini-CT specimens for fracture toughness characterization of RPV materials as part of the DOE Light Water Reactor Sustainability Program, Mini-CT specimens were machined from broken Charpy specimens and tested according to ASTM E1921 standard. As result of this study, the fracture toughness of this weld derived by testing Mini-CT specimens in the unirradiated and irradiated conditions is compared to previously reported fracture toughness derived by large number of conventional specimens.

Sokolov, Mikhail A.↗
DOE OSTI2021

Neuromorphic Graph Algorithms: Cycle Detection, Odd Cycle Detection, and Max Flow

Neuromorphic computing is poised to become a promising computing paradigm in the post Moore’s law era due to its extremely low power usage and inherent parallelism. Spiking neural networks are the traditional use case for neuromorphic systems, and have proven to be highly effective at machine learning tasks such as control problems. More recently, neuromorphic systems have been applied outside of the arena of machine learning, primarily in the field of graph algorithms. Neuromorphic systems have been shown to perform graph algorithms faster and with lower power consumption than their traditional (GPU/CPU) counterparts, and are hence an attractive option for a co-processing unit in future high performance computing systems, where graph algorithms play a critical role. In this paper, we present a neuromorphic implementation of cycle detection, odd cycle detection, and the Ford-Fulkerson max-flow algorithm. We further evaluate the performance of these implementations using the NEST neuromorphic simulator by using spike counts and simulation time as proxies for energy consumption and run time. In addition to gains inherent in neuromorphic systems, we show that within the neuromorphic implementations early stopping criteria can be implemented to further improve performance.

Kay, Bill↗
DOE OSTI2025

Continuous surface-to-distributed acoustic sensor snapshots explain reactivation of individual natural fractures during an unconventional reservoir stimulation

ABSTRACT Fiber-optic sensing technologies allow petroleum engineering teams to detect hydraulic fracture interaction with boreholes during unconventional reservoir stimulation. In combination with high-repeatability seismic sources, the same distributed acoustic sensors (DASs) enable vertical seismic profiling (VSP) of the fracture evolution away from the boreholes. We discovered clear signatures of seismic scattering on activated fractures during nine days of continuous seismic monitoring of the fracturing stages at the Austin Chalk/Eagle Ford Field Laboratory. The present study applies a novel approach for quantitative analysis of the scattering events in terms of the evolution of the geometry and elastic stiffness of individual fractures. Our characterization strategy sequentially refines the fracture models: from a stack of 1D soft layers to 3D rectangular inclusions. First, we estimate the number of fracture locations and reflectivity using a modified sparse-spike deconvolution of the stacked VSP traces. The fracture set consists of five fractures spaced by 15–30 m with a reflectivity of approximately 1%. Then, we develop a scattering integral method to refine these estimates along with an inversion of the fracture top and bottom for each monitoring vintage. We find that, initially, some of the fractures are located above the monitoring fiber with the height of approximately 100 m. Then we integrate the seismic interpretation with the low-frequency DAS and pressure and microseismic monitoring to reconstruct the activation process of the fractures. Most likely, some of the natural fractures slowly grew downward to the monitoring fiber as a result of fluid injections in the stimulated well. This led to bright strain anomalies but did not trigger seismicity. The top of the fractures remained almost constant and were limited by a lithologic boundary/stress barrier. To our knowledge, this is the first time VSP data enabled tracking of the fracture evolution with such high spatial and temporal resolution, which was previously only available for crosswell surveys and at a much smaller scale.

Glubokovskikh, Stanislav↗
DOE OSTI2026

EV Shuttle Bus Pilot

The EV Shuttle Bus Pilot dataset contains data and analysis from Hocking-Athens-Perry Community Action's demonstration of an electric bus on routes of their rural Athens Public Transit system. The vehicle used in the demonstration was a Ford E-450 cutaway equipped with an electric drivetrain, a 127-kWh battery system by Motiv Power Systems, and a cabin upfit by Turtle Top. Data gathered include route assignments, running time and distance, fuel economy, and charge cycles. A comparison of the vehicle's observed duty cycle with duty cycle modeling from other rural transit fleets in the National Transit Database is included to help better understand the rural adoption potential for this fleet technology.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2024

Status and prospects of lithium iron phosphate manufacturing in the lithium battery industry

Abstract Lithium iron phosphate (LiFePO 4 , LFP) has long been a key player in the lithium battery industry for its exceptional stability, safety, and cost-effectiveness as a cathode material. Major car makers (e.g., Tesla, Volkswagen, Ford, Toyota) have either incorporated or are considering the use of LFP-based batteries in their latest electric vehicle (EV) models. Despite LFP’s well-researched status as a cathode material, it is expected to fulfill additional demands in electric vehicle applications, such as fast-charging capabilities, wide temperature range adaptability, and higher energy density. This perspective examines the LFP supply chain, synthetic approaches, manufacturing processes, market trends, recent advancements, and evolving demands to better understand its future role in the EV market. Graphical abstract

Lu, Yanying↗
DOE OSTI2020

The Effects of Assumed Source Depth and Shear-Wave Velocity on Moment Tensors Estimated for Small, Contained Chemical Explosions in Granite

ABSTRACT The Source Phenomenology Experiment (SPE-Arizona) included of a series of chemical explosions detonated within a copper mine in Arizona. This study focuses on ground motions from detonations in the copper mine, which are analyzed to assess the uniqueness of the resulting source representation when the source region propagation characteristics have a range of possible models. P-wave velocities are well constrained by refraction data with less constraint of the S-wave velocities. The effects of explosion source depth and VS are assessed with Green’s functions for a range of models in which VP is held constant. Propagation models with a Poisson’s value of 0.25 and a source depth 30–60 m most accurately replicate the data. The explosion was detonated at a centroid depth of 30 m, so trade-offs in depth are demonstrated. The compensated linear vector dipole and explosion components of the Green’s functions convolved with a Mueller–Murphy source function are compared. Both produce significant energy in the 2–12 Hz band, due to surface-wave contributions with no clear depth dependencies above 20 Hz. The range of propagation models is used with the observational data to invert for the frequency-domain moment tensor. Fits to the data from these inversions have cross-correlation values of 0.64, demonstrating effectiveness in replicating the observations with the assumed propagation path effects and resulting source function. Inversions produce horizontal dipoles (Mxx and Myy), roughly half the maximum amplitude of Mzz, consistent with a compensated linear vector dipole source, which is frequency dependent. Denny and Johnson, Mueller–Murphy, Walter and Ford, and the revised Mueller–Murphy source models, parameterized for granite, are compared to the moment tensors. Despite a nonisotropic moment tensor source, the revised Mueller–Murphy isotropic source model best replicates the long-period moments, overshoot, and corner frequency.

Geochemistry & Geophysics↗
DOE OSTI2024

Joint Inversion of Regional Waveform, First-Motion Polarity, and Synthetic Aperture Radar Surface Displacement for the Fourth and Sixth North Korean Declared Nuclear Explosions

Here, this study analyzed the Democratic People’s Republic of Korea’s (DPRK) fourth (DPRK4, 6 January 2016 M w 4.49) and sixth (DPRK6, 7 September 2017 M w 5.2) declared nuclear tests, employing a joint seismic and Interferometric Synthetic Aperture Radar (InSAR) inversion to improve understanding of these events and enhance moment tensor (MT) inversion capabilities. The recent efforts have focused on employing seismic waveform and InSAR geodetic deformation data separately to analyze these and the previous nuclear tests (e.g., Chiang et al., 2018; Myers et al., 2018; Wang et al., 2018). Building upon our previous work (Chi-Durán et al., 2021), we performed a joint regional waveform, first-motion (FM) polarity, and surface displacement inversion, which demonstrated improved source-type discrimination, a revised MT solution with reduced scalar moment uncertainty, and an independently constrained location. In this article, we build on the previous results for DPRK6 by including an analysis using a four-layered velocity model with free-surface topography to compute the near-source static deformation Green’s functions. The model consists of a 50 m basalt layer (⁠V P = 2.07 km/s, V S = 1.2 km/s⁠), a 250 m stratified volcanic deposit layer (⁠V P = 1.73 km/s, V S = 1.0 km/s⁠), a 700 m weathered granodiorite layer (⁠V P = 2.5 km/s, V S = 1.3 km/s⁠⁠), and a granodiorite half-space (⁠V P = 5.35 km/s, V S = 3.09 km/s⁠⁠). The half-space shares the velocity of the regional MDJ2 velocity model (Ford et al., 2010), which has proven effective for waveform inversion in the region. This model considers the range of reported values for various lithologies and weathering effects. Our findings show that using the layered velocity model enhances the recovery of source location and depth for both the explosions by improving fits and reducing uncertainties. The joint inversion also improves source-type discrimination and better constrains the scalar seismic moment necessary for downstream yield estimation.

58 GEOSCIENCES↗
DOE OSTI2021

Paying it Forward: How an Emerging Unconventional Play can Hit the Ground Running

While every tight oil play is unique, there are lessons that can be transferred from one play to another to improve the efficiency and pace of production operations and development. These improvements may not fit precisely in every basin or play but generally hold to themes that can be tested against and built upon. Themes such as the quantity of proppant, longer lateral length, or the number of stages can be directly tied to increased productivity. However, there are diminishing returns on these investment activities for which each operator, within a given play, will be required to identify and mitigate against. This is especially true as the industry steps in and begins developing new tight oil plays. In their nascent stages, these plays may have limited well penetrations and, as a result, limited geological and performance data from which to extrapolate. Pulling together an understanding of where the industry currently resides in terms of how to exploit these resources can provide a boost in terms of working towards greatly improved well completions. In 2019, the US EIA estimated that nearly 8 million barrels of oil per day were produced from tight oil reservoirs in the United States (US EIA, 2020). This represents over 60% of the domestic crude production, originating from multiple reservoirs in the Permian Basin (TX) as well as the Bakken (MT, ND), Eagle Ford (TX), Niobrara (CO, WY), and Anadarko Basin (OK) formations, among others. As such, there are 1,000s of wells across these numerous tight oil plays that can relate an informative story. To build this story, the interplay of geology, well spacing, lateral length, and stimulation, all critical to economic success, will be explored. This paper proposes to look back at these mature tight oil (and gas) basins and bring forth an understanding of what lessons can be applied to the emerging Powder River Basin tight oil reservoirs (Mowry and the Turner/Frontier). The authors will delve into the four broad topics of geology, well spacing, lateral length, and stimulation, highlighting case studies to demonstrate those lessons from established tight oil plays that will underpin planned activities at a Field Laboratory Test Site in the southern Powder River Basin.

02 PETROLEUM↗
DOE OSTI2020

Co-Extrusion (CoEx) for Cost Reduction of Advanced High-Energy-and-Power Battery Electrode Manufacturing

Co-Extrusion (CoEx) is a deposition technology developed at PARC that uses engineered fluidic channels to cause multiple streams of dissimilar fluids to impart shape to one another. Here, we describe the use of CoEx to produce structured cathode electrode films to improve electrochemical performance of thick electrode films. CoEx enables us to create structured electrode films that have periodic regions of enhanced ionic conductivity, enabling higher utilization of thicker cathode films at high discharge rates. While increasing electrode thickness is a known method for increasing energy density of battery electrodes, this increase in energy density typically also results in reduced power density. This project, a collaboration between the Palo Alto Research Center, Oak Ridge National Laboratories, and Ford Motor Company, seeks to first validate the benefits of CoEx at the coin cell level, before performing the necessary R&D effort to scale production up to large (10+ Ah) pouch cells that will show increased energy density without a reduction in power density. We used conventional battery materials (commercially available NMC, PVDF, carbon black, and graphite) to produce structured electrodes via CoEx and compared them to thick and thin conventionally produced (unstructured) battery electrodes. CoEx electrodes show improved high rate performance compared to unstructured electrodes, resulting in higher energy density pouch cells compared to the baseline electrode of 7 and 11% in volumetric and gravimetric energy density, respectively. These electrodes also showed substantially improved electrochemical performance at high discharge rates compared to thick conventional electrodes.

25 ENERGY STORAGE↗
DOE OSTI2020

Batteries Annual Progress Report (FY2019)

The Vehicle Technologies Office (VTO) of the Department of Energy (DOE) conducts research and development (R&D) on advanced transportation technologies that would reduce the nation’s use of imported oil and would also lead to reductions in harmful emissions. Technologies supported by VTO include electric drive components such as advanced energy storage devices (primarily batteries), power electronics and electric drive motors, advanced structural materials, energy efficient mobility systems, advanced combustion engines, and fuels. VTO is focused on funding early-stage high-reward/high-risk research to improve critical components needed for more fuel efficient (and cleaner-operating) vehicles. One of the major VTO objectives is to enable U.S. innovators to rapidly develop the next generation of technologies that achieve the cost, range, and charging infrastructure necessary for the widespread adoption of plug-in electric vehicles (PEVs). An important prerequisite for the electrification of the nation’s light duty transportation sector is development of more cost-effective, longer lasting, and more abuse-tolerant PEV batteries. One of the ultimate goals of this research, consistent with the current vehicle electrification trend, is an EV which can provide the full driving performance, convenience, and price of an internal combustion engine (ICE) vehicle. To achieve this, VTO has established the following overarching goal (Source: FY2021 Congressional Budget Justification1): …identify new battery chemistry and cell technologies with the potential to reduce the cost of electric vehicle battery packs by more than half, to less than $100/kWh (ultimate goal is $60/kWh battery cell cost), increase range to 300 miles, and decrease charge time to 15 minutes or less by 2028. VTO works with key U.S. automakers through the United States Council for Automotive Research (USCAR) – an umbrella organization for collaborative research consisting of Fiat Chrysler Automobiles (FCA), the Ford Motor Company, and General Motors. Collaboration with automakers through the partnership known as U.S. Driving Research and Innovation for Vehicle Efficiency and Energy Sustainability (U.S. DRIVE) attempts to enhance the relevance and the success potential of its research portfolio. VTO competitively selects projects for funding through funding opportunity announcements (FOAs). Directly-funded work at the national laboratories are awarded competitively through a lab-call process. During the past year, VTO continued R&D in support of PEVs. Stakeholders for VTO R&D include universities, national laboratories, other government agencies and industry (including automakers, battery manufacturers, material suppliers, component developers, private research firms, and small businesses). This document summarizes the progress of VTO battery R&D projects supported during the fiscal year 2019 (FY 2019).

25 ENERGY STORAGE↗
DOE OSTI2022

Vapor Deposition Process for Engineering of Dispersed PEMFC ORR Pt/NbO x /C Catalysts

With support from the Department of Energy, and in partnership with Oak Ridge National Laboratory, Exothermics, Northeastern University, the University of Michigan, and IRD Fuel Cells, Ford has led an effort to use physical vapor deposition (PVD) to produce oxygen reduction reaction (ORR) catalysts for proton exchange membrane fuel cells (PEMFCs). Conventional ORR catalysts are made by wet chemical processes, and experience loss of electrochemical surface area and activity over voltage cycling due to Pt dissolution and Pt particle coalescence. Not only was PVD processing researched as a means to reduce solvent waste and enhance reproducibility in catalyst manufacturing, but it was also perceived as a means to deposit preferential phases of niobium oxide onto the catalyst, which would then serve to prevent Pt particle movement and extend PEMFC lifetime.

08 HYDROGEN↗
DOE OSTI2023

Hybrid Al Casting + AM Components for Automotive Applications

Although casting Aluminum (Al) alloys is widely used for automotive application, the conventional casting process is showing limitations for modern vehicle production. A hybrid manufacturing method that is capable of fabricating automotive structures with tailored functionality and tuned attributes at a high production rate is proposed in this project, utilizing the merits of conventional casting methods and additive manufacturing (AM) methods. Ford is interested in supplementing conventional casting processes (e.g., shape casting, high pressure die casting) with local modifications to geometry and microstructure using additive manufacturing techniques. Two additive manufacturing methods, wire-arc and laser hot-wire directed energy deposition AM process, were evaluated by deposition of 4043 filler wire onto high-pressure die cast and permanent mold cast Al-Si alloys. The feasibility of this hybrid manufacturing method was determined through trial deposition and evaluation of defects, microstructure, and mechanical properties. Laser hot-wire deposition was found to be beneficial for this application with low porosity, a refined microstructure, and mechanical properties similar to those reported in the literature for 4043. The mechanical properties of the interface between the A356 casting and deposited 4043 were found to be controlled by the weaker deposit material.

36 MATERIALS SCIENCE↗