Search NASA⌕ Search

SEARCH · Search NASA

Results for “Forest Fires”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3

Combined Retrievals of Boreal Forest Fire Aerosol Properties with a Polarimeter and Lidar

Absorbing aerosols play an important, but uncertain, role in the global climate. Much of this uncertainty is due to a lack of adequate aerosol measurements. While great strides have been made in observational capability in the previous years and decades, it has become increasingly apparent that this development must continue. Scanning polarimeters have been designed to help resolve this issue by making accurate, multi-spectral, multi-angle polarized observations. This work involves the use of the Research Scanning Polarimeter (RSP). The RSP was designed as the airborne prototype for the Aerosol Polarimetery Sensor (APS), which was due to be launched as part of the (ultimately failed) NASA Glory mission. Field observations with the RSP, however, have established that simultaneous retrievals of aerosol absorption and vertical distribution over bright land surfaces are quite uncertain. We test a merger of RSP and High Spectral Resolution Lidar (HSRL) data with observations of boreal forest fire smoke, collected during the Arctic Research of the Composition of the Troposphere from Aircraft and Satellites (ARCTAS). During ARCTAS, the RSP and HSRL instruments were mounted on the same aircraft, and validation data were provided by instruments on an aircraft flying a coordinated flight pattern. We found that the lidar data did indeed improve aerosol retrievals using an optimal estimation method, although not primarily because of the constraints imposed on the aerosol vertical distribution. The more useful piece of information from the HSRL was the total column aerosol optical depth, which was used to select the initial value (optimization starting point) of the aerosol number concentration. When ground based sun photometer network climatologies of number concentration were used as an initial value, we found that roughly half of the retrievals had unrealistic sizes and imaginary indices, even though the retrieved spectral optical depths agreed within uncertainties to independent observations. The convergence to an unrealistic local minimum by the optimal estimator is related to the relatively low sensitivity to particles smaller than 0.1 ( m) at large optical thicknesses. Thus, optimization algorithms used for operational aerosol retrievals of the fine mode size distribution, when the total optical depth is large, will require initial values generated from table look-ups that exclude unrealistic size/complex index mixtures. External constraints from lidar on initial values used in the optimal estimation methods will also be valuable in reducing the likelihood of obtaining spurious retrievals.

Knobelspiesse, K.↗

Future Pathways for Arctic Forest Fires

Wildfires are expected to become more common and more severe in the Arctic states due to climate change. Main cause for the fires is human activity, even in the boreal and Arctic forests. Therefore, activities such forest management and tourism, together with firefighting capacity and readiness, can have a significant impact on future wildfire risks and impacts. To assess the impacts of these factors we have created pathways for future wildfires up to 2050 for the Arctic states. We explore high and low fire activity and risk pathways for all the Arctic states and suggest most our best guess pathways for each state separately. The low activity and fire risk pathway assumes active fire suppression via population participation and official land management, efficient fuel treatments to reduce fire risk, and active firefighting. The high activity and fire risk pathway assumes the opposite due to lack of government and community response, with addition of lacking response to climate-driven changes to wildfire risks. In the Nordic countries, human ignition sources, such as timber extraction, tourism, summer cottages, and expanding wildland-urban intermix due to exurban growth may increase. In addition to these in Canada and Alaska, expansion of agriculture increases the likelihood of open burning of agricultural waste, increasing risk of the fire spreading to wildlands. Drier fuels due to climate change increase the risk of fires, and there is a growing risk of extreme heat conditions, creating favorable conditions for extreme wildfires from any ignition source. Throughout the Arctic lightning is expected to increase, increasing the risk of tundra (specifically grassland) fires, with potential to occur in hard-to-reach locations for firefighting. In short, policy actions and education play a crucial role in future wildfire management and adaptation.

Future↗

Evidence of localized strong enhancements in lower stratospheric CH3CN following intense forest fire activity

On 24 August 1992, the Microwave Limb Sounder (MLS) on the Upper Atmosphere Research Satellite observed a significant enhancement in the abundance of lower stratospheric methyl cyanide at approximately 16-19 km in altitude in a small region off the coast of Florida. Concentrations of order 1400 parts per trillion by volume were observed, compared to a typical stratospheric background level of 30 pptv.

Microwave Limb Sounder (MLS) forest fire stratosph↗

Emissions Relationships Among Western Forest Fire Plumes: II. Plume Typing for Sources of Ozone and Aerosol Absorption

Previous studies of emission factors from biomass burning are prone to largeerrors since they ignore the interplay of mixing and varying pre-fire backgroundCO2 levels. Such complications severely affected our studies of 446 forest fireplume samples measured in the Western US by the science teams of NASAs SEAC4RS and ARCTAS airborne missions. Consequently we propose a MixedEffects Regression Emission Technique (MERET) to check techniques like theNormalized Emission Ratio Method (NERM), where use of sequentialobservations cannot disentangle emissions and mixing. We also evaluate asimpler consensus technique. All techniques relate emissions to fuel burnedusing Cburn Ctot added to the fire plume, where Ctot (CO2 + CO). Mixed-effectsregression can estimate pre-fire background values of Ctot (indexed byobservation j) simultaneously with emissions factors indexed by individualspecies i, xi (Cburn )i,j., MERET and consensus require more than twoemissions indicators. Our studies excluded samples where exogenous CO orCH4 might have been fed into a fire plume, mimicking emission.We sought to let the data on 13 gases and particulate properties suggest clustersof variables and plume types, using non-negative matrix factorization (NMF).While samples were mixtures, the NMF unmixing suggested purer burn types.Particulate properties (bscat, babs, SSA, AE) and gas-phase emissions were interrelated.Finally, we sought a simple categorization useful for modeling ozone productionin plumes. Two kinds of fires produced high ozone: those with large fuel nitrogenas evidenced by remnant CH3CN in the plumes, and also those from veryintense large burns. Fire types with optimal ratios of delta-NOydelta-HCHO associate with the highest additional ozone per unit Cburn, Perhaps theseplumes exhibit limited NOx binding to reactive organics. Perhaps these plumesexhibit limited NOx binding to reactive organics.

ozone↗

Emissions Relationships Among Western Forest Fire Plumes: I. Emission Factors Free from Mixing Errors

Previous studies of emission factors from biomass burning are prone to largeerrors since they ignore the interplay of mixing and varying pre-fire backgroundCO2 levels. Such complications severely affected our studies of 446 forest fireplume samples measured in the Western US by the science teams of NASAsSEAC4RS and ARCTAS airborne missions. Consequently we propose a MixedEffects Regression Emission Technique (MERET) to check techniques like theNormalized Emission Ratio Method (NERM), where use of sequentialobservations cannot disentangle emissions and mixing. We also evaluate asimpler consensus technique. All techniques relate emissions to fuel burnedusing C burn = Δ Ctot added to the fire plume, where ≈ Ctot (CO2 + CO). Mixed-effectsregression can estimate pre-fire background values of Ctot (indexed byobservation j) simultaneously with emissions factors indexed by individual species i, δέλτα-xi (Cburn )i,j., MERET and consensus require more than twoemissions indicators. Our studies excluded samples where exogenous CO orCH4 might have been fed into a fire plume, mimicking emission.We sought to let the data on 13 gases and particulate properties suggest clustersof variables and plume types, using non-negative matrix factorization (NMF).While samples were mixtures, the NMF unmixing suggested purer burn types.Particulate properties (bscat, babs, SSA, AÅE) and gas-phase emissions were interrelated.Finally, we sought a simple categorization useful for modeling ozone productionin plumes. Two kinds of fires produced high ozone: those with large fuel nitrogenas evidenced by remnant CH3CN in the plumes, and also those from veryintense large burns. Fire types with optimal ratios of delta-NOydelta-HCHO associate with the highest additional ozone per unit Cburn, Perhaps theseplumes exhibit limited NOx binding to reactive organics. Perhaps these plumesexhibit limited NOx binding to reactive organics.

plumes↗

An application of LANDSAT digital technology to forest fire fuel type mapping

The role of digital classifications suitable as fuel maps was examined. A Taylor enhancement was produced for an 8 million hectare fire control region showing water, muskeg, coniferous, deciduous and mixed stands, clearcut logging, burned areas, regeneration areas, nonforested areas and large forest roads. Use of the map by fire control personnel demonstrated its usefulness for initial attack decision making.

Kourtz, P. H.↗

Ecosystem Carbon Emissions from 2015 Forest Fires in Interior Alaska

In the summer of 2015, hundreds of wildfires burned across the state of Alaska, and consumed more than 1.6 million ha of boreal forest and wetlands in the Yukon-Koyukuk region. Mapping of 113 large wildfires using Landsat satellite images from before and after 2015 indicated that nearly 60% of this area was burned at moderate-to-high severity levels. Field measurements near the town of Tanana on the Yukon River were carried out in July of 2017 in both unburned and 2015 burned forested areas (nearly adjacent to one-another) to visually verify locations of different Landsat burn severity classes (low, moderate, or high). Results: Field measurements indicated that the loss of surface organic layers in boreal ecosystem fires is a major factor determining post-fire soil temperature changes, depth of thawing, and carbon losses from the mineral topsoil layer. Measurements in forest sites showed that soil temperature profiles to 30 cm depth at burned forest sites increased by an average of 8o - 10o C compared to unburned forest sites. Sampling and laboratory analysis indicated a 65% reduction in soil carbon content and a 58% reduction in soil nitrogen content in severely burned sample sites compared to soil mineral samples from nearby unburned spruce forests. Conclusions: Combined with nearly unprecedented forest areas severely burned in the Interior region of Alaska in 2015, total ecosystem fire emission of carbon to the atmosphere exceeded most previous estimates for the state.

Ecosystem↗

Trace gas emissions from chaparral and boreal forest fires

Using smoke samples collected during low-level helicopter flights, the mixing ratios of CO2, CO, CH4, total nonmethane hydrocarbons, H2, and N2O over burning chaparral in southern California and over a burning boreal forest site in northern Ontario, Canada, were determined. Carbon dioxide-normalized emission ratios were determined for each trace gas for conditions of flaming, mixed, and smoldering combustion. The emission ratios for these trace gases were found to be highest for the smoldering combustion, generally thought to be the least efficient combustion stage. However, high emission ratios for these gases could be also produced during very vigorous flaming combustion.

Cofer, Wesley R., III↗

Remote, unattended, forest fire detector

Instruments for land tract scanning and fire detection include: temperature sensor capable of detecting distant match flame; elevated television camera with automatic controls for light balance, position, filter, and focus; and scanner equipped with photocell to sense intensity of flying spot brought to it by sweep-and-scan mechanism.

Winslow, D. J.↗

Telemetry Speeds Forest-Fire Control

Airborne system rapidly delivers hard copy to firefighters. Sensors in airplane send data to ground station for image processing. Imagery immediately transferred to U.S. Geologic Survey (USGS) maps by photo interpreter. Maps transmitted by telecopies directly to fire-control camps. Receipt by fire camp less than 10 minutes. Information aids in decisions involving deployment of firefighters and equipment, flood control, monitoring oilspills, observing thermal currents, and pollutions monitoring.

Arvesen, J. C.↗

Forest fire mapping

Explore the source record for details and available documents.

Source record↗

Evaluation of a technique for satellite-derived area estimation of forest fires

The advanced very high resolution radiometer (AVHRR), has been found useful for the location and monitoring of both smoke and fires because of the daily observations, the large geographical coverage of the imagery, the spectral characteristics of the instrument, and the spatial resolution of the instrument. This paper will discuss the application of AVHRR data to assess the geographical extent of burning. Methods have been developed to estimate the surface area of burning by analyzing the surface area effected by fire with AVHRR imagery. Characteristics of the AVHRR instrument, its orbit, field of view, and archived data sets are discussed relative to the unique surface area of each pixel. The errors associated with this surface area estimation technique are determined using AVHRR-derived area estimates of target regions with known sizes. This technique is used to evaluate the area burned during the Yellowstone fires of 1988.

Cahoon, Donald R., Jr.↗

Ammonia and nitric acid emissions from wetlands and boreal forest fires

Tests conducted during three (one boreal and two wetland) ecosystem fires have established the NH3- and HNO3-determination effectiveness of the 'tungsten oxide denuder' technique, using a low-flying helicopter to fly through biomass-burn smoke plumes. Both species were found to be present in the smoke plumes at levels much higher than background. Despite the differences between boreal and wetland ecosystems, HNO3 emissions were comparable; NH3 emissions, by contrast, were 5-8 times greater in the boreal fire than in the wetland fires. Biomass burning is found to make a significant role in the tropospheric ammonia budget.

Lebel, Peter J.↗

Forest Fire Study

The impact of natural fires on our environment is examined, especially regarding greenhouse gases.

Source record↗