Search NASA⌕ Search

SEARCH · Search NASA

Results for “Fur”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3

A general theory of two- and three-dimensional rotational flow in subsonic and transonic turbomachines

This report represents a general theory applicable to axial, radial, and mixed flow turbomachines operating at subsonic and supersonic speeds with a finite number of blades of finite thickness. References reflect the evolution of computational methods used, from the inception of the theory in the 50's to the high-speed computer era of the 90's. Two kinds of relative stream surfaces, S(sub 1) and S(sub 2), are introduced for the purpose of obtaining a three-dimensional flow solution through the combination of two-dimensional flow solutions. Nonorthogonal curvilinear coordinates are used for the governing equations. Methods of computing transonic flow along S(sub 1) and S(sub 2) stream surfaces are given for special cases as well as for fully three-dimensional transonic flows. Procedures pertaining to the direct solutions and inverse solutions are presented. Information on shock wave locations and shapes needed for computations are discussed. Experimental data from a Deutsche Forschungs- und Versuchsanstalt fur Luft- und Raumfahrt e.V. (DFVLR) rotor and from a Chinese Academy of Sciences (CAS) transonic compressor rotor are compared with the computed flow properties.

Wu, Chung-Hua↗

FTP-Server for exchange, interpretation, and database-search of ion mobility spectra, literature, preprints and software

To assist current discussion in the field of ion mobility spectrometry, at the Institut fur Spectrochemie und angewandte Spektroskopie, Dortmund, start with 4th of December, 1994 work of an FTP-Server, available for all research groups at univerisities, institutes and research worker in industry. We support the exchange, interpretation, and database-search of ion mobility spectra through data format JCAMP-DS (Joint Committee on Atomic and Molecular Physical Data) as well as literature retrieval, pre-print, notice, and discussion board. We describe in general lines the entrance conditions, local addresses, and main code words. For further details, a monthly news report will be prepared for all common users. Internet email address for subscribing is included in document.

Baumbach, J. I.↗

Progress in superconductivity: The Indian Scenario

India has made rapid progress in the field of high temperature superconductivity, beginning at the time of publication of the Zeitschrift fur Physik paper by Bednorz and Muller. Phase 1 of the program was conceived by the Department of Science & Technology of the Government of India. It consisted of 42 projects in the area of basic research, 23 projects in applications and 4 short-term demonstration studies. The second phase started in October 1991 and will run through March 1995. It consists of 50 basic research programs and 24 application programs. The total investment, mainly consisting of infrastructural development to supplement existing facilities and hiring younger people, has amounted to about Indian Rupees 40 crores, equivalent to about US$ 13 million. The expenditure for the period 1992-1997 shall be up to about Rs. 27 crores, equivalent to about US$ 9 million. The basic idea is to keep pace with developments around the world.

Multani, Manu↗

HELIOS Critical Design Review: Quality Assurance

The following is an account of the activities of the Quality Assurance (QA) department of the project management office highlighting some of the ways in which it controls QA of the subcontractors on one hand and reports on Quality to GfW (Gesellschaft fur Weltraumforschung) on the other hand. The basic document prepared by MBB (Messerschmitt-Bolkow-Blohm) for QA activities is 1. The QA plan based on GfW 002. The QA department is responsible moreover for monitoring and making decisions about the quality of parts and materials and the governing document for this activity is 2. The Parts and Materials Control Plan based on GfW 001 - the reliability program provisions, as well as GfW 002. A brief survey of the contents of the QA Plan is shown. It should be noted that QA activity dealing with parts procurement is partially covered in a separate presentation entitled "Hi-Rel Parts". Supplementary quality documents are shown.

Benoehr, H. C.↗

STS-99 / Endeavour SRTM Science Briefing and Applications from JSC

The primary objective of the STS-99 mission was to complete high resolution mapping of large sections of the Earth's surface using the Shuttle Radar Topography Mission (SRTM), a specially modified radar system. This radar system produced unrivaled 3-D images of the Earth's Surface. This videotape shows a science press briefing. The panel members are Michael Kobrick, the SRTM Project Scientist at JPL; Thomas Henning, SRTM Program Manager at the National Imagery and Mapping Agency; Diane Evans, the Director of the Earth Sciences Program at NASA; and Marian Werner, XSAR Project Manager for the DLR, Deutschen Zentrum fur Luft- und Raumfahrt, Germany's National Aerospace Research Center. Michael Kobrick explained the mechanics of interferometric measurements of the Earth. He explained and demonstrated with a scale model the deployable mast's use. He also explained the importance of the attitude and orbit determination avionics. A brief animated video showing how four beams would give a 225 km wide swath of the Earth topography was viewed. Thomas Henning discussed some of the usage of the digital terrain elevation data for flood relief planning, cell phone station placement, military planning for command and control centers, and flight simulation. He explained that public access to the most precise data would be limited. Diane Evans described data usage in flood prediction, earthquake fault identification and archeology. Marian Werner described the German and Italian input to the project. The questions from the press concerned the time to process this data, and the reasons for the limited access to the more precise data.

Source record↗

STS-99 / Endeavour Mission Overview

The primary objective of the STS-99 mission was to complete high resolution mapping of large sections of the Earth's surface using the Shuttle Radar Topography Mission (SRTM). This radar system will produce unrivaled 3-D images of the Earth's Surface. This videotape presents a mission overview press briefing. The panel members are Dr. Ghassem Asrar, NASA Associate Administrator Earth Sciences; General James C. King, Director National Imagery and Mapping Agency (NIMA); Professor Achim Bachem, Member of the Executive Board, Deutschen Zentrum fur Luft- und Raumfahrt (DLR), the German National Aerospace Research Center; and Professor Sergio Deiulio, President of the Italian Space Agency. Dr. Asrar opened with a summary of the history of Earth Observations from space, relating the SRTM to this history. This mission, due to cost and complexity, required partnership with other agencies and nations, and the active participation of the astronauts. General King spoke to the expectations of NIMA, and the use of the Synthetic Aperture Radar to produce the high resolution topographic images. Dr. Achim Bachem spoke about the international cooperation that this mission required, and some of the commercial applications and companies that will use this data. Dr Deiulio spoke of future plans to improve knowledge of the Earth using satellites. Questions from the press concerned use of the information for military actions, the reason for the restriction on access to the higher resolution data, the mechanism to acquire that data for scientific research, and the cost sharing from the mission's partners. There was also discussion about the mission's length.

Source record↗

Stardust: The Adventure has Begun

The NASA Discovery STARDUST Mission was launched in February, 1999 to fly through the coma of P/Wild 2 in January, 2004 and return captured cometary and interplanetary dust particles to earth in January, 2006 for detailed analyses by the international science community. The STARDUST spacecraft is carrying a dust collector employing JPL Aerogel for collecting interstellar dust during interplanetary cruise and cometary dust during Wild 2 flyby. Additional instrumentation include the MPI fur Extraterrestrische Physik Cometary and Interplanetary Dust Analyzer, the University of Chicago Dust Flux Monitor and the JPL Imaging Camera. Doppler tracking of the spacecraft and high rate attitude orientation and body-fixed rate data from engineering subsystems will also provide science information. The presentation will describe the mission, scientific objectives and current state of the spacecraft in detail.

Duxbury, Thomas C.↗

Workshop on Extraterrestrial Materials from Cold and Hot Deserts

The workshop was held July 6-8, 1999 before the Meteoritical Society meeting in Johannesburg, South Africa. The venue was Kwa Maritane Resort in the Pilanesburg Game Reserve. Conveners were Ludolf Schultz (Chair, MPI fur Chemie), Ian Franchi (Open University), Arch Reid (University of Houston), and Mike Zolensky (NASA JSC). Extended abstracts will be published as an LPI Technical Report. In the first session, Marvin discussed three African iron meteorites: Cape of Good Hope, Gibeon, and Hoba. Grady presented a statistical analysis of meteorites from hot and cold deserts. Wasson discussed types of Antarctic iron meteorites. Several presentations characterized populations of meteorites from individual desert areas: Libyan Desert (Weber et al.), Nullarbor Region (Bevan et al.), and Mojave Desert (Kring et al. and Verish et al). Pairing among EET87503-group howardites was discussed by Buchanan et al. Based on 14C terrestrial ages of Allan Hills ordinary chondrites, Bland et al. suggested that ice flow may be the principal sink for Antarctic meteorites. The effects of preterrestrial and terrestrial alteration were considered in the second session. Nakamura et al. and Lipschutz discussed asteroidal metamorphism of carbonaceous chondrites. Zolensky presented evidence for preterrestrial halide and sulfide in meteorites. Crozaz and Wadhwa described terrestrial alteration of Dar al Gani 476. Welten and Nishiizumi discussed terrestrial weathering of chondrites from Frontier Mountain, Antarctica. Most of the third session dealt with terrestrial meteorite ages. Based on 14C-10Be ages, Jull et al. discussed the exponential decay in numbers of meteorites with increased age. Nishiizumi et al. concluded that some Allan Hills meteorites have much older terrestrial ages than any meteorites from Lewis Cliffs. Welten et al. discussed terrestrial ages determined by 41Ca/36CI of metal separates from hot desert meteorites. Based on a comparison with large IDPs, Flynn et al. suggested that polar micrometeorites, lost a water-soluble sulfate phase by terrestrial alteration. Nyquist suggested that Type I cosmic spheres from deep sea sediments and polar ice were derived from carbonaceous chondrite-like asteroidal sources. The final session considered noble gases, cosmic ray effects, and thermoluminescence. Calculations presented by Reedy indicate that cosmic ray-produced nuclides are more likely to be preserved in small objects than in larger objects. Murty and Mohapatra. reported that trapped gas in Dar al Gani 476 includes a Martian atmospheric component. Wieler et al. and Scherer et al. reported noble gas abundances in different types of desert meteorites. Patzer and Schultz discussed the influence of terrestrial weathering on cosmic ray exposure ages of enstatite chondrites. Franchi et al. suggested that it is difficult to discriminate whether differences in gas release profiles of lunar meteorites from hot deserts and returned lunar samples are the result of terrestrial weathering or shock metamorphism. Benoit and Sears surveyed natural and induced thermoluminescence of Antarctic ordinary chondrites. Merchel et al. analyzed Saharan meteorites with short or complex exposure histories.

Buchanan, Paul C.↗

Measurements of Nucleation-Mode Particle Size Distributions in Aircraft Plumes during SULFUR 6

This report summarizes the participation of the University of Denver in an airborne measurement program, SULFUR 6, which was undertaken in late September and early October of 1998 by the Deutsches Zentrum fur Luft und Raumfahrt (DLR). Scientific findings from two papers that have been published or accepted and from one manuscript that is in preparation are presented. The SULFUR 6 experiment was designed to investigate the emissions from subsonic aircraft to constrain calculations of possible atmospheric chemical and climatic effects. The University of Denver effort contributed toward the following SULFUR 6 goals: (1) To investigate the relationship between fuel sulfur content (FSC--mass of sulfur per mass of fuel) and particle number and mass emission index (El--quantity emitted per kg of fuel burned); (2) To provide upper and lower limits for the mass conversion efficiency (nu) of fuel sulfur to gaseous and particulate sulfuric acid; (3) To constrain models of volatile particle nucleation and growth by measuring the particle size distribution between 3 and 100 nm at aircraft plume ages ranging from 10(exp -1) to 10(exp 3) s; (4) To determine microphysical and optical properties and bulk chemical composition of soot particles in aircraft exhaust; and (5) To investigate the differences in particle properties between aircraft plumes in contrail and non-contrail situations. The experiment focused on emissions from the ATTAS research aircraft (a well characterized, but older technology turbojet) and from an in-service Boeing 737-300 aircraft provided by Lufthansa, with modem, high-bypass turbofan engines. Measurements were made from the DLR Dassault Falcon 900 aircraft, a modified business jet. The Atmospheric Effects of Aviation Program (AEAP) provided funding to operate an instrument, the nucleation-mode aerosol size spectrometer (N-MASS), during the SULFUR 6 campaign and to analyze the data. The N-MASS was developed at the University of Denver with the support of NOAA's Office of Global Programs and NASA's AEAP and measures particle size distributions in the 4-100 nm range.

Brock, Charles A.↗

Structure of Protoplanetary Environments

Our research focused on the structure and composition of the disks in the T Tau and Haro 6-10 multiple star systems and on the nature of the 'infrared companions' that these systems contain. This work has resulted in two papers, one on T Tau, presently under review at the Astrophysical Journal, and the other, on Haro 6-10, about to be submitted to Astronomy and Astrophysics. In the paper 'Evidence for Extinction and Accretion Variability in T Tau S' by Tracy L. Beck, L. Prato, and M. Simon, we present angularly resolved spectra of T Tau N (the visible star) and T Tau S (the infrared companion, IRC) in the three micrometer water ice-feature and the K-band. Most of the water ice absorption lies along the line of sight to T Tau S, confirming it is seen through stronger obscuration. A decrease in the ice-band absorption toward T Tau S between 12/98 and 1/00, significant, at the two-sigma level, was associated with an increase in its near IR flux. Bracket gamma emission is detected in T Tau N and S, and H2 (2.12 micrometer) emission only toward T Tau S, consistent with previous studies of IRCs. Our results suggest that the near IR variability of T Tau S is probably caused by both variations in accretion rate and extinction. Our paper on Haro 6-10, 'The Near IR and Ice Band Variability of Haro, 6-10' by Ch. Leinert, T.L. Beck, S. Ligori, M. Simon, J. Woitas, and R.R. Howell, represents a fusion of originally independent efforts at the Max Planck Institut fur Astronomie (Heidelberg) and Stony Brook. Our combined observations demonstrate that both Haro 6-10 S (the visible star) and Haro 6-10 N (the IRC) vary significantly in near IR flux on time scales as short as a month. The substantial decrease of Haro 6-10 S in the last four years carries the photometric signature of increased extinction. However, a comparable K-band flux increase of the IRC is associated with a dimming at H so cannot be explained by lower extinction. Absorption in the 3.1 micrometer ice band was always greater toward the IRC during our observations indicating a large amount of obscuring material. We detect variable extinction in the ice-band toward Haro 6-10 S and the IRC, significant at the 3.5-sigma and 2.0-sigma levels, respectively.

Simon, Michal↗

Multiple-etalon systems for the Advanced Technology Solar Telescope

Multiple etalon systems are discussed that meet the science requirements for a narrow-passband imaging system for the 4-meter National Solar Observatory (NSO)/Advance Technology Solar Telescope (ATST). A multiple etalon system can provide an imaging interferometer that works in four distinct modes: as a spectro-polarimeter, a filter-vector magnetograph, an intermediate-band imager, and broadband high-resolution imager. Specific dual and triple etalon configurations are described that provide a spectrographic passband of 2.0-3.5 micron and reduce parasitic light levels to 10(exp -4) as required for precise polarization measurement, e.g., Zeeman measurements of magnetic sensitive lines. A TESOS-like (Telecentric Etalon SOlar Spectrometer) triple etalon system provides a spectral purity of 10(exp -5). The triple designs have the advantage of reducing the finesse requirement on each etalon; allow the use of more stable blocking filters, and have very high spectral purity. A dual-etalon double-pass (Cavallini-like) system can provide a competing configuration. Such a dual-etalon design can provide high contrast. The selection of the final focal plane instrument will depend on a trade-off between an ideal instrument and practical reality. The trade study will include the number of etalons, their aperture sizes, complexities of the optical train, number of blocking filters, configuration of the electronic control system, computer interfaces, temperature controllers, etalon controllers, and their associated feedback electronics. The heritage of single and multiple etalon systems comes from their use in several observatories, including the Marshall Space Flight Center (MSFC) Solar Observatory, Sacramento Peak Observatory (NSO), and Kiepenheuer-Institut fur Sonnenphysik (KIS, Germany), Mees Solar Observatory (University of Hawaii), and Arcetri Astrophysical Observatory (Italy). The design of the ATST multiple etalon system will benefit from the experience gained at these observatories.

Gary, G. Allen↗

Stereo Imaging Velocimetry System and Method

A system and a method is provided for measuring three dimensional velocities at a plurality of points in a fluid employing at least two cameras positioned approximately perpendicular to one another. Image frames captured by the cameras may be filtered using background subtraction with outlier rejection with spike-removal filtering. The cameras may calibrated to accurately represent image coordinates in a world coordinate system using calibration grids modified using warp transformations. The two-dimensional views of the cameras may be recorded fur image processing and particle track determination. The tracer particles may be tracked on a two-dimensional basis and then stereo matched to obtain three-dimensional locations of the particles as a function of time so that velocities can be measured there from.

Mark McDowell↗

An Overview of the Performance of the Chandra X-ray Observatory

The Chandra X-ray Observatory is the X-ray component of NASA's Great Observatory Program which includes the recently launched Spitzer Infrared Telescope, the Hubble Space Telescope (HST) for observations in the visible, and the Compton Gamma-Ray Observatory (CGRO) which, after providing years of useful data has reentered the atmosphere. All these facilities provide, or provided, scientific data to the international astronomical community in response to peer-reviewed proposals for their use. The Chandra X-ray Observatory was the result of the efforts of many academic, commercial, and government organizations primarily in the United States but also in Europe. NASA s Marshall Space Flight Center (MSFC) manages the Project and provides Project Science; Northrop Grumman Space Technology (NGST - formerly TRW) served as prime contractor responsible for providing the spacecraft, the telescope, and assembling and testing the Observatory; and the Smithsonian Astrophysical Observatory (SAO) provides technical support and is responsible for ground operations including the Chandra X-ray Center (CXC). Telescope and instrument teams at SAO, the Massachusetts Institute of Technology (MIT), the Pennsylvania State University (PSU), the Space Research Institute of the Netherlands (SRON), the Max-Planck Institut fur extraterrestrische Physik (MPE), and the University of Kiel support also provide technical support to the Chandra Project. We present here a detailed description of the hardware, its on-orbit performance, and a brief overview of some of the remarkable discoveries that illustrate that performance.

Weisskopf, M. C.↗

Observations of O (VI) Emission from the Diffuse Interstellar Medium Toward l =113 deg b = 71 deg

Emission from 0 VI (lambda lambda 1032, 1038) in the diffuse interstellar medium was observed in two, long Fur Ultra-violet Spectroscopic Explorer (FUSE) observations at l = approximately equals 1l3 degrees .0 and b approximately equals 70 degrees .7 (near the quasar HS 1307+4617). The observed intensities are 2580 +/- 380 (random) +/- 360 (systematic) and 1100 +/- 160 (random) +/- 160 (systematic) photons cm(exp -2)/s s/r in the 1032 and 1038 A emission lines, respectively. The electron density, thermal pressure, and depth of the emitting gas are calculated from the observed intensities. The velocity of the emitting material is about +10 km/s relative to the local standard of rest and less than + 30 km/s relative to the H I along the line of sight. The similarity suggests that the highly ionized gas is quiescent and not recently shock heated. Emission from the C 11 3 s(exp 2) S(sub 1/2) to 2p(exp 2) P(sub 3/2) transition at 1037 A is also observed, and upper limits are placed on the intensities of ultraviolet line emission from C I, C 111, N I, N 11, Mg 11, Si 11, S 11, S 111. S IV, S VI. Fe 11, and Fe 111.

Shelton, R. L.↗

Effects of heavy ions on visual function and electrophysiology of rodents: the ALTEA-MICE project

ALTEA-MICE will supplement the ALTEA project on astronauts and provide information on the functional visual impairment possibly induced by heavy ions during prolonged operations in microgravity. Goals of ALTEA-MICE are: (1) to investigate the effects of heavy ions on the visual system of normal and mutant mice with retinal defects; (2) to define reliable experimental conditions for space research; and (3) to develop animal models to study the physiological consequences of space travels on humans. Remotely controlled mouse setup, applied electrophysiological recording methods, remote particle monitoring, and experimental procedures were developed and tested. The project has proved feasible under laboratory-controlled conditions comparable in important aspects to those of astronauts' exposure to particle in space. Experiments are performed at the Brookhaven National Laboratories [BNL] (Upton, NY, USA) and the Gesellschaft fur Schwerionenforschung mbH [GSI]/Biophysik (Darmstadt, FRG) to identify possible electrophysiological changes and/or activation of protective mechanisms in response to pulsed radiation. Offline data analyses are in progress and observations are still anecdotal. Electrophysiological changes after pulsed radiation are within the limits of spontaneous variability under anesthesia, with only indirect evidence of possible retinal/cortical responses. Immunostaining showed changes (e.g. increased expression of FGF2 protein in the outer nuclear layer) suggesting a retinal stress reaction to high-energy particles of potential relevance in space. c2004 COSPAR. Published by Elsevier Ltd. All rights reserved.

NASA Center JSC↗

CCSDS Spacecraft Monitor and Control Mission Operations Interoperability Prototype

We are entering a new era in space exploration. Reduced operating budgets require innovative solutions to leverage existing systems to implement the capabilities of future missions. Custom solutions to fulfill mission objectives are no longer viable. Can NASA adopt international standards to reduce costs and increase interoperability with other space agencies? Can legacy systems be leveraged in a service oriented architecture (SOA) to further reduce operations costs? The Operations Technology Facility (OTF) at the Johnson Space Center (JSC) is collaborating with Deutsches Zentrum fur Luft- und Raumfahrt (DLR) to answer these very questions. The Mission Operations and Information Management Services Area (MOIMS) Spacecraft Monitor and Control (SM&C) Working Group within the Consultative Committee for Space Data Systems (CCSDS) is developing the Mission Operations standards to address this problem space. The set of proposed standards presents a service oriented architecture to increase the level of interoperability among space agencies. The OTF and DLR are developing independent implementations of the standards as part of an interoperability prototype. This prototype will address three key components: validation of the SM&C Mission Operations protocol, exploration of the Object Management Group (OMG) Data Distribution Service (DDS), and the incorporation of legacy systems in a SOA. The OTF will implement the service providers described in the SM&C Mission Operation standards to create a portal for interaction with a spacecraft simulator. DLR will implement the service consumers to perform the monitor and control of the spacecraft. The specifications insulate the applications from the underlying transport layer. We will gain experience with a DDS transport layer as we delegate responsibility to the middleware and explore transport bridges to connect disparate middleware products. A SOA facilitates the reuse of software components. The prototype will leverage the capabilities of existing legacy systems. Various custom applications and middleware solutions will be combined into one system providing the illusion of a set of homogenous services. This paper will document our journey as we implement the interoperability prototype. The team consists of software engineers with experience on the current command, telemetry and messaging systems that support the International Space Station (ISS) and Space Shuttle programs. Emphasis will be on the objectives, results and potential cost saving benefits.

Lucord, Steve↗

Evaluation of Small Form Factor Fiber Optic Interconnects for the NASA Electronics Parts and Packaging Program (NEPP)

The Diamond AVIM optical fiber connector has been used for over a decade in flight environments. AVIM which stands for Aviation Intermediate Maintenance is always referenced as a fiber optic connector type from the DIN (Deutsches Institut fur Normung) family of optical fiber connectors. The newly available Mini AVIM and DMI (Definition Multimedia Interface) connectors also by Diamond provide similar features as the high performance AVIM with the added benefits of being small form factor for board mount and internal box use where long connectors and strain relief can not be accommodated. Transceiver, fiber laser technology and receiver optic technology based on small sized constraints will benefit the most by the reduction in connector form factor. It is for this reason that the Mini AVIM is being evaluated for multimode and single mode optical fiber use in both fiber based and cable based packaging configurations. In a fiber based termination, there are no cable materials to bond to the connector. The only bonding that is conducted is the mounting of the fiber with epoxy to the connector ferrules (which are called DMI ferrules). In a cable configuration, the compatibility of the connector subcomponents along with the upjacketing materials of the cable around the fiber needs to be considered carefully for termination fabrication. Cabled terminations will show greater insertion loss and high probability of failures during thermal cycling testing. This is due to the stressing of the combination of materials that each have different Coefficients of Thermal Expansion (CTE's) and that are bonded together to the connector subcomponents. As the materials flex during thermal excursions, forces are applied to the termination and can make the system fail if the grouping of materials (per their CTE's) are not compatible and this includes cable materials, epoxies, ferrule and connector body components. For this evaluation, multimode 100 micron core step index fiber was used for the fiber terminated condition, and single mode SMF-28 upjacketed with W.L. Gore Flexlite was used for the cabled configuration. For background purposes, a comparison is presented here for information purposes between the high performance AVIM connector features and the Mini AVIM small form factor connectors. Basic connector features are described here.

Ott, Melanie↗

Keck/NIRC2 Imaging of the Warped, Asymmetric Debris Disk Around HD 32297

We present Keck/NIRC2 K(sub s) band high-contrast coronagraphic imaging of the luminous debris disk around the nearby, young A star HD 32297 resolved at a projected separation of r = 0.3 - 2.5" (approx equals 35 - 280 AU). The disk is highly warped to the north and exhibits a complex, "wavy" surface brightness profile interior to r approx equals 110 AU, where the peaks/plateaus in the profiles are shifted between the NE and SW disk lobes. The SW side of the disk is 50 - 100% brighter at r = 35 - 80 AU, and the location of its peak brightness roughly coincides with the disk's mm emission peak. Spectral energy distribution modeling suggests that HD 32297 has at least two dust populations that may originate from two separate belts likely at different locations, possibly at distances coinciding with the surface brightness peaks. A disk model fur a single dust belt including a phase function with two components and a 5 - 10 AU pericenter offset explains the disk's warped structure and reproduces some of the surface brightness profile's shape (e.g. the overall "wavy" profile, the SB peak/plateau shifts) but more poorly reproduces the disk's brightness asymmetry and the profile at wider separations (r > 110 AU). Although there may be a1ternate explanations, agreement between the SW disk brightness peak and disk's peak rom emission is consistent with an overdensity of very small, sub-blowout-sized dust and large, 0.1 - 1 mm-sized grains at approx equal 45 AU tracing the same parent population of planetesimals. New near-IR and submm observations may be able to clarify whether even more complex grain scattering properties or dynamical sculpting by an unseen planet are required to explain HD 32297's disk structure.

Currie, Thayne↗