Search NASA⌕ Search

SEARCH · Search NASA

Results for “GLYCEROL”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3

Enhancement of polyhydroxyalkanoate production by co-feeding lignin derivatives with glycerol in Pseudomonas putida KT2440

Abstract Background Efficient utilization of all available carbons from lignocellulosic biomass is critical for economic efficiency of a bioconversion process to produce renewable bioproducts. However, the metabolic responses that enable Pseudomonas putida to utilize mixed carbon sources to generate reducing power and polyhydroxyalkanoate (PHA) remain unclear. Previous research has mainly focused on different fermentation strategies, including the sequential feeding of xylose as the growth stage substrate and octanoic acid as the PHA-producing substrate, feeding glycerol as the sole carbon substrate, and co-feeding of lignin and glucose. This study developed a new strategy—co-feeding glycerol and lignin derivatives such as benzoate, vanillin, and vanillic acid in Pseudomonas putida KT2440—for the first time, which simultaneously improved both cell biomass and PHA production. Results Co-feeding lignin derivatives (i.e. benzoate, vanillin, and vanillic acid) and glycerol to P. putida KT2440 was shown for the first time to simultaneously increase cell dry weight (CDW) by 9.4–16.1% and PHA content by 29.0–63.2%, respectively, compared with feeding glycerol alone. GC–MS results revealed that the addition of lignin derivatives to glycerol decreased the distribution of long-chain monomers (C10 and C12) by 0.4–4.4% and increased the distribution of short-chain monomers (C6 and C8) by 0.8–3.5%. The 1 H– 13 C HMBC, 1 H– 13 C HSQC, and 1 H– 1 H COSY NMR analysis confirmed that the PHA monomers (C6–C14) were produced when glycerol was fed to the bacteria alone or together with lignin derivatives. Moreover, investigation of the glycerol/benzoate/nitrogen ratios showed that benzoate acted as an independent factor in PHA synthesis. Furthermore, 1 H, 13 C and 31 P NMR metabolite analysis and mass spectrometry-based quantitative proteomics measurements suggested that the addition of benzoate stimulated oxidative-stress responses, enhanced glycerol consumption, and altered the intracellular NAD + /NADH and NADPH/NADP + ratios by up-regulating the proteins involved in energy generation and storage processes, including the Entner–Doudoroff (ED) pathway, the reductive TCA route, trehalose degradation, fatty acid β -oxidation, and PHA biosynthesis. Conclusions This work demonstrated an effective co-carbon feeding strategy to improve PHA content/yield and convert lignin derivatives into value-added products in P. putida KT2440. Co-feeding lignin break-down products with other carbon sources, such as glycerol, has been demonstrated as an efficient way to utilize biomass to increase PHA production in P. putida KT2440. Moreover, the involvement of aromatic degradation favours further lignin utilization, and the combination of proteomics and metabolomics with NMR sheds light on the metabolic and regulatory mechanisms for cellular redox balance and potential genetic targets for a higher biomass carbon conversion efficiency.

09 BIOMASS FUELS↗

Formation of Gas-Phase Allyl Radicals from Glycerol on Rutile TiO2(110)

The reaction pathways of glycerol on partially reduced TiO2(110) have been studied by a combination of molecular beam dosing and temperature-programmed desorption (TPD). Glycerol is found to bind more strongly to TiO2(110) than glycols due to an additional hydroxyl group in the molecule. When the Ti surface sites are saturated by glycerol, the majority of glycerol molecules (~ 95%) undergo further reactions to yield carbon-free (water and hydrogen) and carbon-containing products that are desorbed during the TPD ramp. In contrast to glycols for which both water and hydrogen arise exclusively from the cleavage of glycol O-H bonds, we identify two distinct reaction channels resulting from the cleavage of O-H and C-H bonds, respectively, for both water and hydrogen evolution from glycerol on TiO2(110). Quantitative determination of the desorption yields of water and hydrogen reveals that the C-H bond scission channel which occurs at higher temperature than the O-H bond scission channel, is a minor reaction channel for water formation, while it is a major reaction channel responsible for hydrogen evolution. For the carbon-containing products, we exclude both carbon deposition and carbon oxides (CO and CO2) formation, and identify the allyl radical as the major carbon-containing product. The formation of the allyl radical is accompanied by the formation of various minor carbon-containing products including propylene, acrolein, allyl alcohol, acetone, formaldehyde and ethylene. The different surface chemistries observed between glycerol and simpler alcohols and glycols on TiO2(110), suggest that smaller oxygenates cannot serve as models for larger oxygenates in probing their reaction pathways on oxide surfaces. The new reaction channels observed for glycerol on TiO2(110) may open up a new way to convert bio-renewable glycerol directly to pure hydrogen and hydrocarbons on TiO2. This work was supported by the US Department of Energy, Office of Sciences, Office of Basic Energy Sciences, Division of Chemical Sciences, Geosciences & Biosciences, and performed in EMSL, a national scientific user facility sponsored by the Department of Energy’s Office of Biological and Environmental Research and located at Pacific Northwest National Laboratory (PNNL). PNNL is a multiprogram national laboratory operated for the DOE by Battelle.

Chen, Long↗

Aerobic oxidation of glycerol catalyzed by M salts of PMo 12 O 40 3- (M = K + , Zn 2+ , Cu 2+ , Al 3+ , Cr 3+ , Fe 3+ )

Glycerol is a co-product in the manufacture of biodiesel from vegetable oil and animal fat. A significant increase in biodiesel production results in adramatic overproduction of glycerol. The oxidation of glycerol to lactic acid (LA) by O 2 is considered to be a promising technology to increase the value of glycerol. Studies on the fundamental reaction mechanism vary for different catalytic systems. Here in this work we have chosen Keggin polyoxometalates (POMs) as an exemplary family of water-soluble hydrolytically and oxidatively-stable, fully-inorganic complexes with transition-metal and non-transition-metal counter-cations (M in the formula, MPMo 12 O 40 , where M = H + , K + , Zn 2+ , Cu 2+ , Al 3+ , Cr 3+ , Fe 3+ in appropriate number to counterbalance the 3- charge of PMo 12 O 40 3- ). Reactions involving hydrogen peroxide, an intermediate during glycerol oxidation, produce free radicals. A kinetic analysis reveals that the radical chain length under typical conditions is about 20–30. After minimal optimization, the yield of LA was 88% at glycerol conversion > 97% (1.0 M aqueous solution of glycerol, 4.0 mM of the Al salt of PMo 12 O 40 3- , henceforth “AlPMo”, 10 bar O 2 at 60 °C, reaction time 6.0 h).

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Carbon nanotube supported PdAg nanoparticles for electrocatalytic oxidation of glycerol in anion exchange membrane fuel cells

Electro-oxidation of alcohol is the key reaction occurring at the anode of a direct alcohol fuel cell (DAFC), in which both reaction kinetics (rate) and selectivity (to deep oxidation products) need improvement to obtain higher power density and fuel utilization for a more efficient DAFC. We recently found that a PdAg bimetallic nanoparticle catalyst is more efficient than Pd for alcohol oxidation: Pd can facilitate deprotonation of alcohol in a base electrolyte, while Ag can promote intermediate aldehyde oxidation and cleavage of C-single bondC bond of C 3 species to C 2 species. Furthermore, a combination of the two active sites (Pd and Ag) with two different functions, can simultaneously improve the reaction rates and deeper oxidation products of alcohols. In this continuing work, Pd, Ag mono, and bimetallic nanoparticles supported on carbon nanotubes (Ag/CNT, Pd/CNT, Pd 1 Ag 1 /CNT, and Pd 1 Ag 3 /CNT) were prepared using an aqueous-phase reduction method; they served as working catalysts for studying electrocatalytic oxidation of glycerol in an anion-exchange membrane-based direct glycerol fuel cell. Combined XRD, TEM, and HAADF-STEM analyses performed to fully characterize as-prepared catalysts suggested that they have small particle sizes: 2.0 nm for Pd/CNT, 2.3 nm for PdAg/CNT, 2.4 nm for PdAg 3 /CNT, and 13.9 nm for Ag/CNT. XPS further shows that alloying with Ag results in more metal state Pd presented on the surface, and this may be related to their higher direct glycerol fuel cell (DGFC) performances. Single DGFC performance and product analysis results show that PdAg bimetallic nanoparticles can not only improve the glycerol reaction rate so that higher power output can be achieved, but also facilitate deep oxidation of glycerol so that a higher faradaic efficiency and fuel utilization can be achieved along with optimal reaction conditions (increased base-to-fuel ratio). Half-cell electrocatalytic activity measurement and single fuel cell product analysis of different glycerol oxidation intermediates, including C 3 : glycerate, tartronate, mesoxalate, and lactate; C 2 : glycolate and oxalate, over PdAg/CNT catalyst was further conducted and produced deeper insight into the synergistic effects and reaction pathways of bimetallic PdAg catalysts in glycerol electrocatalytic oxidation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Heterometallic metal-organic framework-templated synthesis of porous Co{sub 3}O{sub 4}/ZnO nanocage catalysts for the carbonylation of glycerol

The efficient synthesis of glycerol carbonate (GLC) has recently received great attention due to its significance in reducing excess glycerol in biodiesel production as well as its promising applications in several industrial fields. However, the achievement of high conversion and high selectivity of GLC from glycerol in heterogeneous catalytic processes remains a challenge due to the absence of high-performance solid catalysts. Herein, highly porous nanocage catalysts composed of well-mixed Co{sub 3}O{sub 4} and ZnO nanocrystals were successfully fabricated via a facile heterometallic metal-organic framework (MOF)-templated synthetic route. Benefiting from a high porosity and the synergistic effect between Co{sub 3}O{sub 4} and ZnO, the as-prepared composite catalysts exhibited a significantly enhanced production efficiency of GLC in the carbonylation reaction of glycerol with urea compared to the single-component counterparts. The yield of GLC over the Co{sub 50}Zn{sub 50}-350 catalyst reached 85.2%, with 93.3% conversion and near 91% GLC selectivity, and this catalytic performance was superior to that over most heterogeneous catalysts. More importantly, the proposed templated synthetic strategy of heterometallic MOFs facilitates the regulation of catalyst composition and surface structure and can therefore be potentially extended in the tailoring of other metal oxide composite catalysts. - Graphical abstract: Highly porous Co{sub 3}O{sub 4}/ZnO nanocages were fabricated via a heterometallic MOF-templated route and exhibited a significantly enhanced photocatalytic performance in the production of glycerol carbonate. Display Omitted - Highlights: • Porous Co{sub 3}O{sub 4}/ZnO nanocages were synthesized by a facile thermolysis route of heterometallic MOFs. • The as-prepared nanocages possessed massive pores and Co{sub 3}O{sub 4}/ZnO heterojunctions. • The Co{sub 3}O{sub 4}/ZnO ratio in the composites was easily adjusted by tuning the Co/Zn ratio in the precursors. • The composite catalysts exhibited a significantly enhanced production efficiency of glycerol carbonate in the carbonylation reaction of glycerol with urea.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Hydrogen and methane production in a two-stage anaerobic digestion system by co-digestion of food waste, sewage sludge and glycerol

Highlights: • H{sub 2} and CH{sub 4} production was assessed in a two-stage acidogenesis-methanogenesis system. • Addition of glycerol to food waste and sewage sludge increased H{sub 2} and CH{sub 4} yields. • Stable H{sub 2} and CH{sub 4} production and higher energy yield were obtained at 1% glycerol. • The use of 3% glycerol led to process instabilities in the methanogenic phase. • Co-digestion of food waste, sewage sludge and glycerol maximizes energy production. - Abstract: In this study, hydrogen and methane production from co-digestion of food waste (FW), sewage sludge (SS) and raw glycerol (GL) was evaluated in a two-stage acidogenesis-methanogenesis anaerobic system under mesophilic conditions (35 °C). The effect of glycerol addition (1 and 3% v/v) as co-substrate was assessed in ternary mixtures (FW + SS + GL), with the concentration of all substrates kept at 10 g VS/L. Besides contributing to reduce the lag phase of the acidogenic bacterial culture, the presence of GL increased the hydrogen production in all tested conditions and the maximum hydrogen yield was obtained for the FW + SS + 3%GL mixture (179.3 mL H{sub 2}/g VS). On the other hand, the highest methane production (342 mL CH{sub 4}/g VS) was achieved in the test supplemented with 1% GL. At 3% GL, abrupt reductions in the biogas CH{sub 4} content and pH values resulting from instability in methanogenesis process were noticed over the experiment. By taking into account the hydrogen and methane production stages, the highest energy yield (i.e., 15.5 kJ/g VS) was obtained with the ternary mixture containing 1% GL. Overall, the results of this study demonstrate the feasibility of using glycerol as co-substrate to increase the H{sub 2} and CH{sub 4} production efficiency in a two-stage anaerobic co-digestion process, allowing simultaneous treatment of three residues (FW, SS and GL) and energy production.

08 HYDROGEN↗

Glycerol Is an Osmoprotectant in Two Antarctic Chlamydomonas Species From an Ice-Covered Saline Lake and Is Synthesized by an Unusual Bidomain Enzyme

Glycerol, a compatible solute, has previously been found to act as an osmoprotectant in some marine Chlamydomonas species and several species of Dunaliella from hypersaline ponds. Recently, Chlamydomonas reinhardtii and Dunaliella salina were shown to make glycerol with an unusual bidomain enzyme, which appears to be unique to algae, that contains a phosphoserine phosphatase and glycerol-3-phosphate dehydrogenase. Here we report that two psychrophilic species of Chlamydomonas (C. spp. UWO241 and ICE-MDV) from Lake Bonney, Antarctica also produce high levels of glycerol to survive in the lake’s saline waters. Glycerol concentration increased linearly with salinity and at 1.3 M NaCl, exceeded 400 mM in C. sp. UWO241, the more salt-tolerant strain. We also show that both species expressed several isoforms of the bidomain enzyme. An analysis of one of the isoforms of C. sp. UWO241 showed that it was strongly upregulated by NaCl and is thus the likely source of glycerol. These results reveal another adaptation of the Lake Bonney Chlamydomonas species that allow them to survive in an extreme polar environment.

59 BASIC BIOLOGICAL SCIENCES↗

The role of glycerol-3-phosphate dehydrogenase 1 in the progression of fatty liver after acute ethanol administration in mice

Highlights: • Ethanol administration increased GPD1 mRNA expression. • Ethanol administration increased glucose incorporation into TG glycerol moieties. • No increase in hepatic TG levels was observed in ethanol-injected GPD1 null mice. • We propose that GPD1 is required for ethanol-induced TG accumulation in the liver. - Abstract: Acute ethanol consumption leads to the accumulation of triglycerides (TGs) in hepatocytes. The increase in lipogenesis and reduction of fatty acid oxidation are implicated as the mechanisms underlying ethanol-induced hepatic TG accumulation. Although glycerol-3-phosphate (Gro3P), formed by glycerol kinase (GYK) or glycerol-3-phosphate dehydrogenase 1 (GPD1), is also required for TG synthesis, the roles of GYK and GPD1 have been the subject of some debate. In this study, we examine (1) the expression of genes involved in Gro3P production in the liver of C57BL/6J mice in the context of hepatic TG accumulation after acute ethanol intake, and (2) the role of GPD1 in the progression of ethanol-induced fatty liver using GPD1 null mice. As a result, in C57BL/6J mice, ethanol-induced hepatic TG accumulation began within 2 h and was 1.7-fold greater than that observed in the control group after 6 h. The up-regulation of GPD1 began 2 h after administering ethanol, and significantly increased 6 h later with the concomitant escalation in the glycolytic gene expression. The incorporation of {sup 14}C-labelled glucose into TG glycerol moieties increased during the same period. On the other hand, in GPD1 null mice carrying normal GYK activity, no significant increase in hepatic TG level was observed after acute ethanol intake. In conclusion, GPD1 and glycolytic gene expression is up-regulated by ethanol, and GPD1-mediated incorporation of glucose into TG glycerol moieties together with increased lipogenesis, is suggested to play an important role in ethanol-induced hepatic TG accumulation.

60 APPLIED LIFE SCIENCES↗

Biocatalytic gateway to convert glycerol into 3-hydroxypropionic acid in waste-based biorefineries: Fundamentals, limitations, and potential research strategies

Microbial conversion of bioenergy-derived waste glycerol into value-added chemicals has emerged as an important bioprocessing technology due to its eco-friendliness, feasible technoeconomics, and potential to provide sustainability in biodiesel and bioethanol production. Glycerol is an abundant liquid waste from bioenergy plants with a projected volume of 6 million tons by 2025, accounting for about 10% of biodiesel and 2.5% of bioethanol yields. 3-Hydroxypropionic acid (3-HP) is a major product of glycerol bioconversion, which is the third largest biobased platform compound with expected market size and value of 3.6 million tons/year and USD 10 billion/year, respectively. Despite these biorefinery values, 3-HP biosynthesis from glycerol is still at an immature stage of commercial exploitation. The main challenges behind this immaturity are the toxic effects of 3-HPA on cells, the distribution of carbon flux to undesirable pathways, low tolerance of cells to glycerol and 3-HP, co-factor dependence of enzymes, low enzyme activity and stability, and the problems of substrate inhibition and specificity of enzymes. To address these challenges, it is necessary to understand the fundamentals of glycerol bioconversion and 3-HP production in terms of metabolic pathways, related enzymes, cell factories, midstream process configurations, and downstream 3-HP recovery, as discussed in this review critically and comprehensively. It is equally important to know the current challenges and limitations in 3-HP production, which are discussed in detail along with recent research efforts and remaining gaps. Finally, possible research strategies are outlined considering the recent technological advances in microbial biosynthesis, aiming to attract further research efforts to achieve a sustainable and industrially exploitable 3-HP production technology. Here, by discussing the use of advanced tools and strategies to overcome the existing challenges in 3-HP biosynthesis, this review will attract researchers from many other similar biosynthesis technologies and provide a common gateway for their further development.

59 BASIC BIOLOGICAL SCIENCES↗

Communication: Contrasting effects of glycerol and DMSO on lipid membrane surface hydration dynamics and forces

Glycerol and dimethyl sulfoxide (DMSO) are commonly used cryoprotectants in cellular systems, but due to the challenges of measuring the properties of surface-bound solvent, fundamental questions remain regarding the concentration, interactions, and conformation of these solutes at lipid membrane surfaces. We measured the surface water diffusivity at gel-phase dipalmitoylphosphatidylcholine (DPPC) bilayer surfaces in aqueous solutions containing ≤7.5 mol. % of DMSO or glycerol using Overhauser dynamic nuclear polarization. We found that glycerol similarly affects the diffusivity of water near the bilayer surface and that in the bulk solution (within 20%), while DMSO substantially increases the diffusivity of surface water relative to bulk water. We compare these measurements of water dynamics with those of equilibrium forces between DPPC bilayers in the same solvent mixtures. DMSO greatly decreases the range and magnitude of the repulsive forces between the bilayers, whereas glycerol increases it. We propose that the differences in hydrogen bonding capability of the two solutes leads DMSO to dehydrate the lipid head groups, while glycerol affects surface hydration only as much as it affects the bulk water properties. The results suggest that the mechanism of the two most common cryoprotectants must be fundamentally different: in the case of DMSO by decoupling the solvent from the lipid surface, and in the case of glycerol by altering the hydrogen bond structure and intermolecular cohesion of the global solvent, as manifested by increased solvent viscosity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Metabolic Engineering of the Oleaginous Yeast Yarrowia lipolytica PO1f for Production of Erythritol from Glycerol

Yarrowia lipolytica was found natively to produce erythritol, mannitol, and arabitol during growth on glucose, fructose, mannose, and glycerol. Osmotic stress is known to increase sugar alcohol production, and was found to significantly increase erythritol production during growth on glycerol. To better understand erythritol production from glycerol, since it was the most promising sugar alcohol, we measured the expression of key genes and intracellular metabolites. Osmotic stress increased the expression of several key genes in the glycerol catabolic pathway and the pentose phosphate pathway. Analysis of intracellular metabolites revealed that amino acids, sugar alcohols, and polyamines are produced at higher levels in response to osmotic stress. Heterologous overexpression of the sugar alcohol phosphatase increased erythritol production and glycerol utilization in Y. lipolytica . We further increased erythritol production by increasing the expression of native glycerol kinase (GK), and transketolase (TKL). These data show the growth and titers produced.

Conversion↗

Polyurethane Foams Based on Biopolyols from Castor Oil and Glycerol

In this work, the synthesis of biopolyols derived from castor oil and different glycerols was performed by chemical glycerolysis with sodium hydroxide as catalyst at 225 °C. The biopolyol obtained from high purity glycerol led to predominantly MAG formation, whereas the biopolyol produced using crude glycerol, byproduct from biodiesel industry, resulted in higher DAG, TAG and FFA content due to the higher amount of water. Both biopolyols were employed for the synthesis of polyurethane (PU) foams by bulk polymerization using methylene diphenyl diisocyanate (MDI) at different NCO:OH ratios. The foams were evaluated by apparent density, insoluble fraction, Fourier transform infrared spectroscopy, scanning electron microscope and thermogravimetric analysis. The results showed that crude glycerol provided PU foams as much as commercial glycerol, however the characteristics may be different, mainly due to the presence of water in the reaction medium.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗

The Role of Rhenium in the Conversion of Glycerol to Synthesis Gas Over Carbon Supported Platinum-Rhenium Catalysts

Reaction kinetics measurements were carried out to study the conversion of aqueous solutions of glycerol (30 and 80 wt%) over carbon-supported Pt and Pt-Re catalysts at temperatures from 483 to 523 K. The results of these studies show that the turnover frequencies for production of H2, CO, CO2, and light alkanes (primarily methane) all increase upon the addition of Re to Pt/C catalysts. The molar ratio of H2/CO increases, while the CO/CO2 ratio decreases with Re addition, indicating increased rate of water-gas shift. For glycerol conversion over a Pt-Re/C catalyst with an atomic Pt:Re ratio of 1:1, increasing pressure or decreasing temperature leads to an increase in the production of alkanes and light oxygenated hydrocarbons (ethanol, methanol, propanediols, and acetone) at the expense of CO and CO2. Temperature-programmed desorption studies and microcalorimetric measurements indicate that addition of Re to Pt modifies the interaction of CO with surface sites. X-ray absorption spectroscopy and transmission electron microscopy studies provide evidence indicating that Pt-Re/C catalysts consist primarily of bimetallic nanoparticles with sizes below 2 nm, and Re inhibits the sintering of these nanoparticles during reaction conditions for glycerol conversion. The results of these reaction kinetic studies and characterization studies indicate that the performance of Pt-Re/C catalysts for glycerol conversion is related to the formation of Pt-Re nanoparticles, for which Re promotes the overall rate of glycerol reforming by reducing the binding energy of CO to Pt, thereby leading to less extensive blocking of surface sites by reaction intermediates and/or products. In addition, the presence of Re facilitates water-gas shift and Csingle bondO bond cleavage reactions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Photoisomerization of cyanine derivatives in 1-butyl-3-methylimidazolium hexafluorophosphate and aqueous glycerol: Influence of specific interactions

Photoisomerization of two cyanine derivatives, 3,3{sup '}-diethyloxadicarbocyanine iodide (DODCI) and merocyanine 540 (MC 540), has been investigated in an ionic liquid, 1-butyl-3-methylimidazolium hexafluorophosphate and aqueous glycerol (93 wt % glycerol +7 wt % water) by measuring fluorescence lifetimes and quantum yields. The aim of this work is to understand how the rates of photoisomerization of DODCI and MC 540 are influenced by specific solute-solvent interactions besides the viscosity of the medium. For DODCI, it has been observed that the nonradiative rate constants, which represent the rates of photoisomerization, are almost identical in the ionic liquid and aqueous glycerol at given temperature, indicating that viscosity is the sole parameter that governs the rate of photoisomerization. In contrast, the photoisomerization rate constants of MC 540 have been found to be a factor of 2 higher in aqueous glycerol compared to the ionic liquid. The observed behavior is due to the zwitterionic character of MC 540, a consequence of which, the twisted state gets stabilized by the solute-solvent hydrogen bonding interactions in aqueous glycerol, thus lowering the barrier for isomerization.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Catalytic glycerol steam reforming for hydrogen production

Hydrogen production from glycerol by steam reforming combine two major advantages: (i) using glycerol as raw material add value to this by product of bio-diesel production which is obtained in large quantities around the world and have a very limited utilization now, and (ii) by implication of water molecules in the reaction the efficiency of hydrogen generation is increased as each mol of glycerol produces 7 mol of H{sub 2}. In this work we present the results obtained in the process of steam reforming of glycerol on Ni/Al{sub 2}O{sub 3}. The catalyst was prepared by wet impregnation method and characterized through different methods: N{sub 2} adsorption-desorption, XRD, TPR. The catalytic study was performed in a stainless steel tubular reactor at atmospheric pressure by varying the reaction conditions: steam/carbon ratio (1-9), gas flow (35 ml/min -133 ml/min), temperature (450-650°C). The gaseous fraction of the reaction products contain: H{sub 2}, CH{sub 4}, CO, CO{sub 2}. The optimum reaction conditions as resulted from this study are: temperature 550°C, Gly:H{sub 2}O ratio 9:1 and Ar flow 133 ml/min. In these conditions the glycerol conversion to gaseous products was 43% and the hydrogen yield was 30%.

08 HYDROGEN↗

Thermal conductivity of Glycerol’s liquid, glass, and crystal states, glass-liquid-glass transition, and crystallization at high pressures

To investigate the effects of local density fluctuations on phonon propagation in a hydrogen bonded structure, we studied the thermal conductivity κ of the crystal, liquid, and glassy states of pure glycerol as a function of the temperature, T, and the pressure, p. We find that the following: (i) κ{sub crystal} is 3.6-times the κ{sub liquid} value at 140 K at 0.1 MPa and 2.2-times at 290 K, and it varies with T according to 138 × T{sup −0.95}; (ii) the ratio κ{sub liquid} (p)/κ{sub liquid} (0.1 MPa) is 1.45 GPa{sup −1} at 280 K, which, unexpectedly, is about the same as κ{sub crystal} (p)/κ{sub crystal} (0.1 MPa) of 1.42 GPa{sup −1} at 298 K; (iii) κ{sub glass} is relatively insensitive to T but sensitive to the applied p (1.38 GPa{sup −1} at 150 K); (iv) κ{sub glass}-T plots show an enhanced, pressure-dependent peak-like feature, which is due to the glass to liquid transition on heating; (v) continuous heating cold-crystallizes ultraviscous glycerol under pressure, at a higher T when p is high; and (vi) glycerol formed by cooling at a high p and then measured at a low p has a significantly higher κ than the glass formed by cooling at a low p. On heating at a fixed low p, its κ decreases before its glass-liquid transition range at that p is reached. We attribute this effect to thermally assisted loss of the configurational and vibrational instabilities of a glass formed at high p and recovered at low p, which is different from the usual glass-aging effect. While the heat capacity, entropy, and volume of glycerol crystal are less than those for its glass and liquid, κ{sub crystal} of glycerol, like its elastic modulus and refractive index, is higher. We discuss these findings in terms of the role of fluctuations in local density and structure, and the relations between κ and the thermodynamic quantities.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Structure of glycerol-3-phosphate dehydrogenase, an essential monotopic membrane enzyme involved in respiration and metabolism

Sn-glycerol-3-phosphate dehydrogenase (GlpD) is an essential membrane enzyme, functioning at the central junction of respiration, glycolysis, and phospholipid biosynthesis. Its critical role is indicated by the multitiered regulatory mechanisms that stringently controls its expression and function. Once expressed, GlpD activity is regulated through lipid-enzyme interactions in Escherichia coli. Here, we report seven previously undescribed structures of the fully active E. coli GlpD, up to 1.75 {angstrom} resolution. In addition to elucidating the structure of the native enzyme, we have determined the structures of GlpD complexed with substrate analogues phosphoenolpyruvate, glyceric acid 2-phosphate, glyceraldehyde-3-phosphate, and product, dihydroxyacetone phosphate. These structural results reveal conformational states of the enzyme, delineating the residues involved in substrate binding and catalysis at the glycerol-3-phosphate site. Two probable mechanisms for catalyzing the dehydrogenation of glycerol-3-phosphate are envisioned, based on the conformational states of the complexes. To further correlate catalytic dehydrogenation to respiration, we have additionally determined the structures of GlpD bound with ubiquinone analogues menadione and 2-n-heptyl-4-hydroxyquinoline N-oxide, identifying a hydrophobic plateau that is likely the ubiquinone-binding site. These structures illuminate probable mechanisms of catalysis and suggest how GlpD shuttles electrons into the respiratory pathway. Glycerol metabolism has been implicated in insulin signaling and perturbations in glycerol uptake and catabolism are linked to obesity in humans. Homologs of GlpD are found in practically all organisms, from prokaryotes to humans, with >45% consensus protein sequences, signifying that these structural results on the prokaryotic enzyme may be readily applied to the eukaryotic GlpD enzymes.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Navigating Glycerol Conversion Roadmap and Heterogeneous Catalyst Selection Aided by Density Functional Theory: A Review

Glycerol has been utilized in an extremely diversified manner throughout human civilization—ranging from food, to various consumer products, to pharmaceuticals, and even explosives. Large surplus in glycerol supply thanks to biodiesel production and biomass processing has created a demand to further boost its utility. One growing area is to expand the use of glycerol as an alternative feedstock to supplement fuels and chemicals production. Various catalytic processes have been developed. This review summarizes catalytic materials for glycerol reforming, hydrodeoxygenation, and oxidation. In particular, rationale for catalyst selection and new catalyst design will be discussed aided by the knowledge of reaction mechanisms. The role of theoretical density functional theory (DFT) in elucidating complex glycerol conversion chemistries is particularly emphasized.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗