Search NASA⌕ Search

SEARCH · Search NASA

Results for “GUNN EFFECT”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3

Modeling, design, fabrication, and testing of InP Gunn devices in the D-band (110 GHz - 170 GHz)

The development of fundamental Gunn sources for D-band frequencies requires improvements of doping profiles, processing technology, and circuit design. We have developed a technology for fabricating InP Gunn diodes using an InGaAs etch-stop layer between the InP substrate and the device layers. The epitaxial layers were grown by CBE. During device processing, the substrate is completely removed. Substrateless devices with an n(+) InGaAs cap layer are expected to have reduced contact and series resistances, and skin effect losses. This technology gives better uniformity and control of the device geometry across the processed chip. InP Gunn devices with a 1.7 micron long active region (doping : 9 x 10(exp 15) cm(exp -3)) have been mounted on copper heat sinks. Two tapered leads were then bonded to the diode and to four quartz standoffs. As a preliminary result, an output power of 13 mW at 82 GHz was obtained. Based on these RF measurements, we determine appropriate material parameters to be used in the Ensemble Monte Carlo model. Subsequently, we use this model to design and evaluate the performance of InP Gunn Devices for D-band frequencies. Using the same technology, we are currently processing Gunn devices with a 1 micron long active region for operation at higher frequencies.

Kamoua, R.↗

Requirements for a near-earth space tug vehicle

The requirement for a small but powerful space tug, which will be capable of autonomous orbital rendezvous, docking and translating cargos between near-earth orbits by the end of this decade to support the growing national and international space infrastructure focused near the Space Station Freedom, is described. An aggregate of missions drives the need for a space tug including reboosting decaying satellites back to their operational altitudes, retrieving failed or exhausted satellites to Shuttle or SSF for on-orbit refueling or repair, and transporting a satellite servicer system with an FTS to ailing satellites for supervised in-place repair. It is shown that the development and operation of a space tug to perform such numerous missions is more cost effective than separate module and satellite systems to perform the same tasks.

Gunn, Charles R.↗

X-ray constraints on the intergalactic medium

We use ROSAT Position Sensitive Proportional Counter (PSPC) spectra of z approximately equal 3 quasars to constrain the density and temperature of the intergalactic medium (IGM). Strong low-energy cutoffs in PSPC spectra of high-redshift quasars are common. However, the absence of absorption toward some high-redshift quasars can be used to put limits on the possible cosmological density, Omega(sub G), of a hot diffuse intergalactic medium (IGM), via an X-ray Gunn-Peterson test using edge and line opacity in the soft X-rays. The K-edges of oxygen, neon, and carbon and the L-edge of iron produce most of the absorption which is spread out by the redshift of the source. We assume an isotropic, isothermal, nonevolving model of the IGM and calculate the optical depth of this absorption. We find that this test can constrain an enriched IGM at temperatures near 10(exp 5) - 10(exp 6) K, intermediate between the hot IGM ruled out by COBE, and the cold IGM ruled out by the traditional Ly alpha Gunn -Peterson test. Photoionization if the IGM by the ultraviolet and X-ray background has a large effect. We give results for three z approximately equal 3 quasars and discuss how the various trade-offs among temperature, abundance, and backgroud radiation strength affect the limits on Omega (sub G). In addition to the high-redshift case, we discuss techniques for constraining the IGM using X-ray spectra of low-redhift quasars (z approximately equal 0.1 - 0.3). Currently available X-ray spectral data have insufficient energy resolution to constrain the IGM umambiguously, and so expected detection limits for future high-resolution spectrometers are presented. We find that with a large effective area (approximately 2000 sq cm), it is possible to substantially constrain or detect the IGM at the densities which are typically predicted.

Aldcroft, Thomas↗

Detection of interstellar DNC - Difficulties of chemical equilibrium hypothesis for enrichment

The J = 1-0 transition of DNC at 76.3058 GHz has been observed in emission in NGC 2264. Comparison with previous observations of HN(C-13) indicates that deuterium is enriched in DNC similarly to the enrichment reported for DCO(+) in this source. The DNC/HNC ratio is estimated to be about 1/24. The results cannot readily be interpreted in terms of chemical equilibria relating to the formation of DNC. It is suggested that the explanation must be sought in isotope effects on rates of formation of interstellar molecules.

Godfrey, P. D.↗

A study of extended zodiacal structures

Observations of cometary dust trails and zodiacal dust bands, discovered by the Infrared Astronomical Satellite (IRAS) were analyzed in a continuing effort to understand their nature and relationship to comets, asteroids, and processes effecting those bodies. A survey of all trails observed by IRAS has been completed, and analysis of this phenomenon continues. A total of 8 trails have been associated with known short-period comets (Churyumov-Gerasimenko, Encke, Gunn, Kopff, Pons-Winnecke, Schwassmann-Wachmann 1, Tempel 1, and Tempel 2), and a few faint trails have been detected which are not associated with any known comet. It is inferred that all short-period comets may have trails, and that the trails detected were seen as a consequence of observational selection effects. Were IRAS launched today, it would likely observe a largely different set of trails. The Tempel 2 trail exhibits a small but significant excess in color temperature relative to a blackbody at the same heliocentric distance. This excess may be due to the presence of a population of small, low-beta particles deriving from large particles within the trail, or a temperature gradient over the surface of large trail particles. Trails represent the very first stage in the formation and evolution of a meteor stream, and may also be the primary mechanism by which comets contribute to the interplanetary dust complex. A mathematical model of the spatial distribution of orbitally evolved collisional debris was developed which reproduces the zodiacal dust band phenomena and was used in the analysis of dust band observations made by IRAS. This has resulted in the principal zodiacal dust bands being firmly related to the principal Hirayama asteroid families. In addition, evidence for the collisional diffusion of the orbital elements of the dust particles has been found in the case of dust generated in the Eos asteroid family.

Sykes, Mark V.↗

Allocating Spare Parts In Complicated Systems

Assortments analyzed for cost effectiveness and effects on system functionality. Eisenberger-Maiocco algorithm (EMA) is efficient Markov algorithm to aid in provision of spare parts. Two calculations performed: forecasting availability of system with given pool of spare parts and determining most cost-effective assortment of spares. EMA written in interpreter PC-BASIC.

Eisenberger, I.↗

Propagation characteristics of some novel coplanar waveguide transmission lines on GaAs at MM-wave frequencies

Three new Coplanar Waveguide (CPW) transmission lines, namely, Suspended CPW (SCPW), Stripline-like Suspended CPW (SSCPW) and Inverted CPW (ICPW), are proposed and also analyzed for their propagation characteristics. The substrate thickness, permittivity and dimensions of housing are assumed to be arbitrary. These structures have the following advantages over conventional CPW. Firstly, the ratio of guide wavelength to free space wavelength is closer to unity which results in larger dimensions and hence lower tolerances. Secondly, the effective dielectric constant is lower and hence the electromagnetic field energies are concentrated more in the air regions which should reduce attenuation. Thirdly, for a prescribed impedance level, the above structures have a wider slot width for identical strip width. Thus, low impedance lines can be achieved with reasonable slot dimensions. Fourthly, in an inverted CPW shunt mounting of active devices, such as Gunn and IMPATT diodes, between the strip and the metal trough is possible. This feature further enhances the attractiveness of the above structures. Lastly, an E-plane probe type transition from a rectangular waveguide to suspended CPW can also be easily realized. The computed results for GaAs at Ka-band illustrate the variation of normalized guide wavelength, effective dielectric constant and the characteristic impedance as a function of the: (1) frequency; (2) distance of separation between the trough side walls; (3) normalized strip and slot widths; and (4) normalized air gap.

Simons, Rainee N.↗

Waveguide submillimeter mixers

A waveguide Schottky barrier diode mixer, which in preliminary tests has yielded a single sideband receiver noise temperature of 4300 K at 692 GHz, when cooled to 77 K is presented. Further refinements and operation at 20 K should produce a significant improvement in performance. From a system point of view, the very high efficiency of the radiation pattern produced by the conical feedhorn with cylindrical corrector mirror enhances the effective sensitivity by a factor of 1.5 to 2 compared to open-structure corner-reflector systems. A second-harmonic mixer for 557 GHz, also in the fundamental mode rectangular waveguide was developed. When combined with a frequency-tripled Gunn oscillator, this makes an extremely compact and lightweight submillimeter radiometer.

Goldsmith, Paul F.↗

Pyridine Catalysis of Anhydride Hydrolysis within Carbodiimide‐Driven Reaction Networks

Carbodiimide-fueled reaction networks offer a versatile platform for nonequilibrium chemical systems. Typically, the carbodiimide converts a carboxylic acid to its anhydride, called “activation,” which subsequently undergoes hydrolysis, called “deactivation.” Here, we investigate pyridines with variable nucleophilicity as catalysts to control deactivation (pyridine, 4-methylpyridine, 4-methoxypyridine, and 4-dimethylaminopyridine). Reactions have been monitored by NMR spectroscopy. Although this reaction network is simple, determination of well-defined rate constants from kinetic modeling is challenging because of correlation between the parameters. This issue can be addressed by analyzing the anhydride hydrolysis independently. The rate of attack of the pyridines on the anhydride follows expected nucleophilicity trends, although this is offset by increased protonation of more-nucleophilic pyridines at typical pH's. The optimized parameters can be used to model the full carbodiimide-driven process, although the presence of the common carbodiimide EDC has unanticipated effects on the anhydride hydrolysis rate. The results offer context for controlling carbodiimide-fueled reaction networks through the choice of suitable catalysts and pH.

Anhydrides↗

Heat-Transfer Measurements on the Apexes of Two 60 deg Sweptback Delta Wings (Panel Semiapex Angle of 30 deg) Having 0 deg and 45 deg Dihedral at a Mach Number of 4.95

An experimental investigation was conducted to evaluate the heat-transfer rates at the apex of two 60 degree sweptback delta wings (panel semi-apex angle of 30 degrees) having cylindrical leading edges and 0 degrees and 45 degree positive dihedral. The models tested might correspond to the first several feet of a hypersonic reentry vehicle. The tests were conducted at a Mach number of 4.95 and a stagnation temperature of 400 F. nominal test-section unit Reynolds numbers varied from 2 x 10(exp 6) to 12 x 10(exp 6) per foot. The results of the investigation indicated that the laminar heat-transfer distributions (ratio of local to stagnation-line heating rate) about the models normal to the leading edges were in close agreement with two-dimensional blunt-body theory. The three-dimensional stagnation point heat-transfer rate on the 0 degree dihedral model was in excellent agreement with theory and the stagnation-line heat transfer on the straight portion of the leading edge of both models approached a constant level 12 percent above the theoretical stagnation-line level on an isolated swept infinite cylinder. When the heating rates on the 45 degree dihedral model (planform sweep of 69.3 degree) were compared with those on the 0 degree dihedral model (planform sweep of 60 degrees) at equal angles of attack and equal lifts greater than zero, the stagnation-line heating rates on the 45 degrees dihedral model were, in general, considerably lower as a result of the difference in effective sweeps of the leading edges. On the wing panels inboard from the stagnation lines, the differences in heating were very small. The stagnation-line heat-transfer variation with angle of attack, the shift in stagnation-line location, and the reduction in stagnation-line heat transfer resulting from the increase in effective sweep when positive dihedral is incorporated into a constant-panel 0 degree dihedral wing, all agreed with the results of a theoretical study made of highly swept delta wings with large positive dihedral.

Gunn, Charles R.↗

Probabilities for gravitational lensing by point masses in a locally inhomogeneous universe

Probability functions for gravitational lensing by point masses that incorporate Poisson statistics and flux conservation are formulated in the Dyer-Roeder construction. Optical depths to lensing for distant sources are calculated using both the method of Press and Gunn (1973) which counts lenses in an otherwise empty cone, and the method of Ehlers and Schneider (1986) which projects lensing cross sections onto the source sphere. These are then used as parameters of the probability density for lensing in the case of a critical (q0 = 1/2) Friedmann universe. A comparison of the probability functions indicates that the effects of angle-averaging can be well approximated by adjusting the average magnification along a random line of sight so as to conserve flux.

Isaacson, Jeffrey A.↗

A strongly implicit procedure for the compressible Navier-Stokes equations

The strongly implicit procedure of Stone is used to obtain numerical solutions of the compressible Navier-Stokes equations in conservative form. In contrast to the spatially split Douglas-Gunn type methods, the method is shown to be numerically stable for the three-dimensional wave equation. The method is applied to a variety of external and internal two-dimensional flow problems involving shock wave boundary-layer interaction for both laminar and turbulent flows. The results are in good agreement with other methods and/or experiments. The storage penalty associated with the method is discussed and a simple, yet effective, means of minimizing the problem is presented.

Walters, R. W.↗

Spectrophotometry of faint cluster galaxies and the Hubble diagram - An approach to cosmology

New spectrophotometric data are presented for large-redshift galaxies in clusters. A new approach to aperture corrections and the analysis of the Hubble diagram is outlined, including the explicit incorporation of evolutionary effects. The importance of selection effects on the usual methods of analysis are in principle overcome in the analysis, although the heterogeneity of the sample still makes conclusions about cosmology slightly suspect. Formal values of the deceleration parameter are derived under several sets of assumptions, yielding results between +0.33 and -1.27 with formal standard deviations of order 0.7.

Gunn, J. E.↗

Karhunen-Loeve Estimation of the Power Spectrum Parameters from the Angular Distribution of Galaxies in Early Sloan Digital Sky Survey Data

We present measurements of parameters of the three-dimensional power spectrum of galaxy clustering from 222 square degrees of early imaging data in the Sloan Digital Sky Survey (SDSS). The projected galaxy distribution on the sky is expanded over a set of Karhunen-Loeve (KL) eigenfunctions, which optimize the signal-to-noise ratio in our analysis. A maximum likelihood analysis is used to estimate parameters that set the shape and amplitude of the three-dimensional power spectrum of galaxies in the SDSS magnitude-limited sample with r* less than 21. Our best estimates are gamma = 0.188 +/- 0.04 and sigma(sub 8L) = 0.915 +/- 0.06 (statistical errors only), for a flat universe with a cosmological constant. We demonstrate that our measurements contain signal from scales at or beyond the peak of the three-dimensional power spectrum. We discuss how the results scale with systematic uncertainties, like the radial selection function. We find that the central values satisfy the analytically estimated scaling relation. We have also explored the effects of evolutionary corrections, various truncations of the KL basis, seeing, sample size, and limiting magnitude. We find that the impact of most of these uncertainties stay within the 2 sigma uncertainties of our fiducial result.

Szalay, Alexander S.↗

Toward unbiased determination of the redshift evolution of Lyman-alpha forest clouds

The possibility of using D(sub A), the mean depression of a quasar spectrum due to Ly-alpha forest absorption, to study the number density evolution of the Ly-alpha forest clouds is examined in some detail. Current D(sub A) measurements are made against a continuum that is a power-law extrapolation from the continuum longward of Ly-alpha emission. Compared to the line-counting approach, the D(sub A)-method has the advantage that the D(sub A) measurements are not affected by line-blending effects. However, we find using low-redshift quasar spectra obtained with the Hubble Space Telescope (HST), where the true continuum in the Ly-alpha forest can be estimated fairly reliably because of the much lower density of the Ly-alpha forest lines, that the extrapolated continuum often deviates systematically from the true continuum in the forest region. Such systematic continuum errors introduce large errors in the D(sub A) measurements. The current D(sub A) measurements may also be significantly biased by the possible presence of the Gunn-Peterson absorption. We propose a modification to the existing D(sub A)-method, namely, to measure D(sub A) against a locally established continuum in the Ly-alpha forest. Under conditions that the quasar spectrum has good resolution and S/N to allow for a reliable estimate of the local continuum in the Ly-alpha forest, the modified D(sub A) measurements should be largely free of the systematic uncertainties suffered by the existing D(sub A) measurements. We also introduce a formalism based on the work of Zuo (1993) to simplify the application of the D(sub A)-method(s) to real data. We discuss the merits and limitations of the modified D(sub A)-method, and conclude that it is a useful alternative. Our findings that the extrapolated continuum from longward of Ly-alpha emission often deviates systematically from the true continuum in the Ly-alpha forest present a major problem in the study of the Gunn-Peterson absorption.

Lu, Limin↗

A systematic survey for distant galaxy clusters

A photographic survey for faint clusters of galaxies has been carried out with fine-grained photographic emulsions using the 1.2 m Schmidt and 5 m Hale telescopes, as well as the 4 m Mayall telescope. A total of 418 clusters have been found with redshifts mostly in the range from 0.15 to 0.92. The survey was planned to minimize distance-dependent selection effects in the resulting catalog. In areas of sky where the deepest search was made, the sample is complete to about z = 0.50; there are 11 clusters per square degree at this limit. At a redshift of 1.0 there should be 63 or 45 clusters per square degree depending on whether q0 is 0.0 or 0.5, provided there is no evolution.

Gunn, J. E.↗

Preliminary analysis of cometary dust trails

Dust trails are observed in the orbits of some short-period comets. Large particles, having diameters in the submillimeter range and larger, are ejected by these comets into orbits close to that of the parent comet. By considering the effects of ejection and radiation forces, the spread of particles of different diameters along a parent comet's orbit, both ahead and behind the comet in mean anomaly were modeled. Using this model, the ages of the dust trail material associated with P/Tempel 2, P/Gunn, P/Encke, and P/Schwassmann-Wachmann 1 were estimated; they are found to consist of emissions occurring over a minimum of one to a few orbital periods. It also becomes possible to constrain the particle diameters in a trail segment forward of a comet's orbital position. Such a forward extension is observed in the Tempel 2 and Gunn dust trails, but not the Encke and S-W 1 dust trails. Relative particle sizes among these trails are discussed. The Tempel 2 dust trail is found to have an excess of particles with diameters greater than 1 mm.

Sykes, M. V.↗