Search NASA⌕ Search

SEARCH · Search NASA

Results for “Grain size”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3

Grain size of the surface regolith of asteroid 4 Vesta estimated from its reflectance spectrum in comparison with HED meteorites

The grain-size distribution of the regolith of asteroid 4 Vesta has been estimated by comparing its reflectance spectra (0.3-2.6 microns) with those of HED meteorites. The finest grain-size separate (less than 25 micrometers) of a particular howardite has a reflectance spectrum most similar to Vesta's. In order to better simulate Vesta's surface mineralogy, reflectance spectra of those finest HED meteorite powders were linearly combined, and Vesta's spectrum was scaled for the best fit between them. Both the albedo and the shape of reflectance spectrum of Vesta were well reproduced by regional mixtures of the finest (less than 25 micrometers) powders of HED meteorites. The result suggests the heterogeneity of Vesta's surface and provides an estimate of the visible reflectance of Vesta that is close to its Infrared Astronomical Satellite (IRAS) albedo. Thus, this suggests that fine grains can be generated and retained by relatively small bodies (Vesta is approximately 500 km in diameter).

Hiroi, Takahiro↗

Grain size evolution and fractionation trends in an experimental regolith

The communication of blocky planetary surfaces into fine-grained regoliths was simulated by impacting a fragmental gabbro target 200 times with stainless steel projectiles. It is found that the comminution efficiency of the surfaces changes with time, being highest in the early stages of regolith formation and decreasing gradually. The relationship between mean grain size and cumulative energy is not linear. Individual, fine-grained regolith components can be generated very early from relatively large progenitor fragments without going through intermediate-size fractions. Impact comminution is capable of producing fractionated fines as postulated by Papike et al. (1982). The role of grain-size selective, lateral transport to explain the fractionated nature of lunar regolith fines may have been overestimated in the past.

Horz, F.↗

Effects of grain size and shape in modeling reflectance spectra of mineral mixtures

An 'isograin model' of reflectance from particulate material is presented. The model treats reflectance as a series of grain interactions, incorporating optical constants of each material and two parameters that model the activity of scattering and absorption in the vertical and the horizontal directions, respectively. Mixing ratios of components in mixture are treated as variables and are calculated using least-squares fit. Grain size and shape have a significant effect on the accuracy of predicting mixing ratios but can be modeled by introducing the concept of effective grain size. The model calculates spectra in good agreement with measured spectra and models reflectance within 1 percent and mixing ratios within 5 wt pct.

Hiroi, T.↗

Predicted color excess ratios versus interstellar grain size

Various color excess ratios, the ratio (R) of total to selective extinction, and values of the wavelength of maximum interstellar linear polarization (lambda max) are computed and displayed as functions of mean interstellar grain size and absorption coefficients. E(V-K)/E(B-V)-E(u-b)/E(b-y) is shown to be highly sensitive to changes of mean grain size. The shape of the R versus lambda max curve is shown to depend on the amount of absorption initially present in the grains, and on the absorptivity of the material added to the grains. While no simple model of grain growth has been found to fit all the observations, the two stars with the largest values of lambda max (HD 147889 and W67) support the concept of dielectric mantles growing on dielectric grains. It is further shown that more accurate uby and JKL photometry of heavily reddened stars would permit better discrimination between grain growth theories.

Mcmillan, R. S.↗

The influence of grain size and composition on 1000 to 1400 K slow plastic flow properties of NiAl

The compressive slow plastic flow behavior of several B2 crystal structure NiAl intermetallics has been studied in air between 1000 and 1400 K. Small grain-sized Ni-48.25 at. pct Al (of about 10 microns) was found to be stronger than the previously studied 17 microns diameter material. While grain refinement improved the strength at all test temperatures, the exact mechanism is not clear. Experiments at lower temperature revealed that composition as well as grain size can be an important factor, since Ni-49.2Al was weaker than Ni-48.25Al. Pronounced yield points were found during slow strain-rate testing at 1000 K; however, continued deformation appears to take place by the same mechanism(s) as found at high temperatures. Small changes in thermomechanical processing (TMP) schedules to fabricate Ni-49.2Al indicated that basic deformation characteristics (stress exponent and activation energy) are not affected; however, the preexponential term could be modified if TMP alters the grain structure.

Whittenberger, J. Daniel↗

The Importance of Physical Models for Deriving Dust Masses and Grain Size Distributions in Supernova Ejecta. I. Radiatively Heated Dust in the Crab Nebula

Recent far-infrared (IR) observations of supernova remnants (SNRs) have revealed significantly large amounts of newly condensed dust in their ejecta, comparable to the total mass of available refractory elements. The dust masses derived from these observations assume that all the grains of a given species radiate at the same temperature, regardless of the dust heating mechanism or grain radius. In this paper, we derive the dust mass in the ejecta of the Crab Nebula, using a physical model for the heating and radiation from the dust. We adopt a power-law distribution of grain sizes and two different dust compositions (silicates and amorphous carbon), and calculate the heating rate of each dust grain by the radiation from the pulsar wind nebula. We find that the grains attain a continuous range of temperatures, depending on their size and composition. The total mass derived from the best-fit models to the observed IR spectrum is 0.019-0.13 Solar Mass, depending on the assumed grain composition. We find that the power-law size distribution of dust grains is characterized by a power-law index of 3.5-4.0 and a maximum grain size larger than 0.1 micron. The grain sizes and composition are consistent with what is expected for dust grains formed in a Type IIP supernova (SN). Our derived dust mass is at least a factor of two less than the mass reported in previous studies of the Crab Nebula that assumed more simplified two-temperature models. These models also require a larger mass of refractory elements to be locked up in dust than was likely available in the ejecta. The results of this study show that a physical model resulting in a realistic distribution of dust temperatures can constrain the dust properties and affect the derived dust masses. Our study may also have important implications for deriving grain properties and mass estimates in other SNRs and for the ultimate question of whether SNe are major sources of dust in the Galactic interstellar medium and in external galaxies.

Importance↗

Does application of the Rosiwal Principle to lunar soils require that concentrations of solar-wind-implanted species be grain-size independent

A reconsideration of the application of the Rosiwal Principle to lunar soils indicates a flaw in arguments put forth previously by Criswell (1975). Specifically, by introducing a boundary condition which must exist at the lunar surface, it is shown that concentrations of solar-wind-implanted species showing a dependence on grain size may be able to develop in soils at concentration levels below those required for saturation of grain surfaces. As a result, observed grain-size-dependent concentrations of solar-wind species in lunar soils do not necessarily require the exposure time scales or solar-wind fluxes deduced from the arguments of Criswell.

Becker, R. H.↗

The Effect of Film Composition on the Texture and Grain Size of CuInS2 Prepared by Spray Pyrolysis

Ternary single-source precursors were used to deposit CuInS2 thin films using chemical spray pyrolysis. We investigated the effect of the film composition on texture, secondary phase formation, and grain size. As-grown films were most often In-rich. They became more (204/220)-oriented as indium concentration increased, and always contained a yet unidentified secondary phase. The (112)-prefened orientation became more pronounced as the film composition became more Cu-rich. The secondary phase was determined to be an In-rich compound based on composition analysis and Raman spectroscopy. In addition, as-grown Cu-rich (112)-oriented films did not exhibit the In-rich compound. Depositing a thin Cu layer prior to the growth of CuInS2 increased the maximum grain size from - 0.5 micron to - 1 micron, and prevented the formation of the In-rich secondary phase.

Jin, Michael H.↗

Disappearance of 19P/Borrelly's Silicate Feature in 2001 Apparition Is Attributed to Increase in Grain Size

We report on observations and analysis of HIFOGS 10 microns spectrophotometry of short period comet 19P/Borrelly on 2003 October 13, 15 UT at the NASA IRTF. 19P/Borrelly is one of two short period comets, comet 4PIFaye being the other, to have a silicate feature detected. During Borrelly s perihelion passage in 1994 December, a silicate feature was present with a flux-to-continuum ratio of 0.25. Two apparitions later in 2003 October, the silicate feature is absent. Thermal emission modeling using amorphous olivine and amorphous carbon shows that a slight increase in grain size accounts for the disappearance of the silicate feature. Analysis of 19P/Borrelly suggests grain size, and not the absence of olivine minerals, may be responsible for the absence of silicate features in most short period comets. 19P/Borrelly is one of the more active short period comets. However, short period comets as a family are less active than long period comets. Short period comets probably originated in the Kuiper Belt and suffered collisions while in residence in the outer solar system. Upon evolution into orbits that take them through the inner solar system, the surfaces of short period comets are exposed to sunlight through their many perihelion passages. This is in contrast to long period comets which probably originated near Jupiter and were expelled to the Oort cloud where they have existed and been exposed to cosmic ray processing. By studying the grain properties in short period comets and comparing to long period comets, we compare the effects on the grain populations of different parent body evolution histories. Upcoming opportunities to study short and long period comets will be advertised.

Wooden, D. H.↗

Apollo 16 soils - Grain size analyses and petrography

Soils from South Ray Crater, North Ray Crater, and the interray area of Station 10 have a similar provenance, containing breccia fragments of low to medium metamorphic grade and low light/dark lithic fragment ratios; these appear to be characteristic of the Cayley Formation. The primary difference between soils possibly derived from North Ray and South Ray craters is in the agglutinate content. A soil from Stone Mountain (Station 4) is characterized by breccia fragments of medium to high metamorphic grade and a high light/dark lithic fragment ratio; this soil may be derived from the Descartes Formation. Differences between the selenomorphic units, the Descartes and Cayley formations, may be lithologic as well as structural. The mean grain size varies from 84 to 280 microns, and all of the samples are poorly to very poorly sorted. There appears to be a relation between the sorting, grain size, and agglutinate content, with the finer-grained, better sorted soils containing more than 30% agglutinates. 'Shadowed' soils, collected close to large boulders, are similar in all respects to the 'reference' soils collected at least 5 m from the boulders.

Heiken, G. H.↗

Evolution of isotopic signatures in lunar-regolith nitrogen - Noble gases and nitrogen in grain-size fractions from regolith breccia 79035

Ilmenite and pyroxene grain-size separates from 79035 were analyzed for trapped N; the ilmenite was also analyzed for trapped Xe. Ilmenite N contains two or more isotopically distinct trapped components differing in release temperature and therefore plausibly in implantation energy. The isotopically light, higher-temperature (higher-energy?) component has a delta N-15 value equal to -180 percent, significantly above the minimum value observed in bulk 79035, suggesting that parts of 79035 were exposed on the lunar surface earlier than the ilmenite. Using trapped Ar-40/Ar-36 and cosmogenic Ne-21 (Benkert, 1989) a compaction age of about 1 Ga was derived for the ilmenite. This implies a considerably more recent exposure than previously thought, and suggests that the long-term change in delta N-15 of regolith N was more rapid than generally believed. Comparison of these results with those for black/orange glass from 74001/74002 (compaction age 3.7 Ga; delta N-15 in the range -36 to +18 percent (Kerridge et al., 1991) indicates that the long-term trend may have followed a complex evolutionary path. Data for 79035 pyroxenes are consistent with the ilmenite compaction age but suggest a more complex exposure history.

Kerridge, J. F.↗

New Technology/Old Technology: Comparing Lunar Grain Size Distribution Data and Methods

Laser diffraction technology generates reproducible grain size distributions and reveals new structures not apparent in old sieve data. The comparison of specific sieve fractions with the Microtrac distribution curve generated for those specific fractions shows a reasonable match for the mean of each fraction between the two techniques, giving us confidence that the large existing body of sieve data can be cross-correlated with new data based on laser diffraction. It is well-suited for lunar soils, which have as much as 25% of the material in the less than 20 micrometer fraction. The fines in this range are of particular interest because they may contain a record of important space weathering processes.

Fruland, R. M.↗

Variations in Visible/Near-Infrared Hematite Spectra Related to Grain Size and Crystallinity

Drill fines created by the Curiosity rover at Gale Crater, Mars have exhibited variable visible/near-infrared spectral features attributable to the presence of ferrous and ferric minerals. Drilled locations within the Murray formation and on the Vera Rubin Ridge (VRR) were shown by the CheMin instrument to contain significant amounts of hematite. However, typical hematite spectral features (e.g., absorptions near 530 nm and 860 nm) have varied inconsistently with hematite abundances. This suggests that other factors such as hematite grain size or crystallinity, the presence of amorphous materials, and/or photometric effects play a role in the observed spectra. Using laboratory spectra of hematite acquired at difference grain sizes, we document the variability in key spectral features. We also compare spectral parameters computed from Mastcam spectra on Mars of three hematite-bearing ChemCam calibration target (CCCT) samples with known hematite and amorphous material abundances.

Johnson, J. R.↗

Grain-size Distribution of Apollo 11 Soil 10084

Results of a new grain size analysis of 0.99 g of the submillimeter fraction of the soil 10084, using the JSC methodology, are: 4.28 phi =(51 micrometers) and 2.23 phi (=213 micrometers). A significant fraction (14.2%) of the soil is less than 10 micrometers in size.

Basu, A.↗

Role of grain size and particle velocity distribution in secondary electron emission in space plasmas

By virtue of being generally immersed in a plasma environment, cosmic dust is necessarily electrically charged. The fact that secondary emission plays an important role in determining the equilibrium grain potential has long been recognized, but the fact that the grain size plays a crucial role in this equilibrium potential, when secondary emission is important, has not been widely appreciated. Using both conducting and insulating spherical grains of various sizes and also both Maxwellian and generalized Lorentzian plasmas (which are believed to represent certain space plasmas), we have made a detailed study of this problem. In general, we find that the secondary emission yield delta increases with decreasing size and becomes very large for grains whose dimensions are comparable to the primary electron penetration depth, such as in the case of the very small grains observed at comet Halley and inferred in the interstellar medium. Moreover, we observed that delta is larger for insulators and equilibrium potentials are generally more positive when the plasma has a broad non-Maxwellian tail. Interestingly, we find that for thermal energies that are expected in several cosmic regions, grains of different sizes can have opposite charge, the smaller ones being positive while the larger ones are negative. This may have important consequences for grain accretion in polydisperse dusty space plasmas.

Chow, V. W.↗

Determination of grain size distribution function using two-dimensional Fourier transforms of tone pulse encoded images

Microstructural images may be tone pulse encoded and subsequently Fourier transformed to determine the two-dimensional density of frequency components. A theory is developed relating the density of frequency components to the density of length components. The density of length components corresponds directly to the actual grain size distribution function from which the mean grain shape, size, and orientation can be obtained.

Generazio, E. R.↗

Determination of grain-size distribution function using two-dimensional Fourier transforms of tone-pulse-encoded images

Microstructural images may be tone pulse encoded and subsequently Fourier transformed to determine the two-dimensional density of frequency components. A theory is developed relating the density of frequency components to the density of length components. The density of length components corresponds directly to the actual grain-size distribution function from which the mean grain shape, size, and orientation can be obtained.

Generazio, E. R.↗