Search NASA⌕ Search

SEARCH · Search NASA

Results for “Graphical User Interface”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3

Graphical User Interface for Simplified Neutron Transport Calculations

A number of codes perform simple photon physics calculations. The nuclear industry is lacking in similar tools to perform simplified neutron physics shielding calculations. With the increased importance of performing neutron calculations for homeland security applications and defense nuclear nonproliferation tasks, having an efficient method for performing simple neutron transport calculations becomes increasingly important. Codes such as Monte Carlo N-particle (MCNP) can perform the transport calculations; however, the technical details in setting up, running, and interpreting the required simulations are quite complex and typically go beyond the abilities of most users who need a simple answer to a neutron transport calculation. The work documented in this report resulted in the development of the NucWiz program, which can create an MCNP input file for a set of simple geometries, source, and detector configurations. The user selects source, shield, and tally configurations from a set of pre-defined lists, and the software creates a complete MCNP input file that can be optionally run and the results viewed inside NucWiz.

61 RADIATION PROTECTION AND DOSIMETRY↗

GIS-Based Graphical User Interface Tools for Analyzing Solar Thermal Desalination Systems & High-Potential Implementation

This project developed a user-friendly, open-source, software that enables a comparative evaluation of solar thermal desalination technology options and employs geospatial data layers to identify regions of high-potential for solar thermal desalination. This was accomplished by integrating solar models with desalination models and enhancing their utility by providing GIS-based data inputs. The developed Solar Energy Desalination Analysis Tool (SEDAT) enables techno-economical evaluation of desalination technologies and selection of regions with the highest potential for using solar energy to power desalination plants. It simplifies the planning, design, and valuation of solar thermal and solar hybrid desalination systems in the U.S. and worldwide. SEDAT uses Dash for integrating various layers of large volumes of GIS data with Python-based models of solar energy generation and desalination technologies. It derives time-series of energy generation and water production, with details of plant performance and suggestions for improving the solar-desalination coupling. It is a one of-a-kind tool of analysis representing a definitive advancement in the state-of-the-art. Of solar desalination modeling This report summarizes the various phases of the tool’s development, and presents examples of the results.

14 SOLAR ENERGY↗

Development of a Web-Based Graphical User Interface for Fermilab Robots

This project provides the students/faculty team with the unique opportunity to work with several robots. Additionally, the student team will be able to learn from the experience of the Robotics Initiative members who have a wide variety of technical backgrounds outside of software development. Working with an interdisciplinary group to solve a complex problem that is unique to our facility, is a valuable experience that the lab can provide. This project aligns with the ACORN projects R&D efforts regarding the integration of robotics status/control with the accelerator control system.

43 PARTICLE ACCELERATORS↗

An R Shiny graphical user interface for analyzing, visualizing, and interpreting high precision mass spectrometric data

There is currently a lack of software that meets the needs for the analysis of raw data produced by modern isotope ratio mass spectrometers for both R&D and routine use at SRNL and other US national labs • Needs to accommodate multiple isotope systems, instruments, and manufacturers • Include modern statistical methods and handling/visualization of uncertainty • Flexible software with transparent (no “black box”) and reproducible methods • This project is inspired by existing discipline-specific data analysis software (e.g., Tripoli1 , ET_Redux2 , IsoplotR3) used in the geochemical community • Our goal is to build an open source data analysis software package that focuses on flexibility, transparency, and reproducibility

Labone, Elizabeth↗

Methods, computer readable media, and graphical user interfaces for analysis of frequency selective surfaces

A frequency selective surface (FSS) and associated methods for modeling, analyzing and designing the FSS are disclosed. The FSS includes a pattern of conductive material formed on a substrate to form an array of resonance elements. At least one aspect of the frequency selective surface is determined by defining a frequency range including multiple frequency values, determining a frequency dependent permittivity across the frequency range for the substrate, determining a frequency dependent conductivity across the frequency range for the conductive material, and analyzing the frequency selective surface using a method of moments analysis at each of the multiple frequency values for an incident electromagnetic energy impinging on the frequency selective surface. The frequency dependent permittivity and the frequency dependent conductivity are included in the method of moments analysis.

Kotter, Dale K↗

Graphical User Interface Software for Gross Defect Detection at the Atucha-I Plant

At the Atucha-I pressurized heavy water reactor in Argentina, fuel assemblies in the spent fuel pools are stored by suspending them in two vertically stacked layers. This introduces the unique problem of verifying the presence of fuel in either layer without physically moving the fuel assemblies. Movement of fuel, especially from the lower layer, would involve a major effort on the part of the operator. Given that the facility uses both natural uranium and slightly enriched uranium at 0.85 w% {sup 235}U, and has been in operation since 1974, a wide range of burnups and cooling times can exist in any given pool. Additionally, while fuel assemblies are grouped together in a uniform fashion, the packing density from group to group can vary within a single pool. A tool called the Spent Fuel Neutron Counter (SFNC) was developed and successfully tested at the site to verify, in an in-situ condition, the presence of fuel up to burnups of 8,000 MWd/t. Since the neutron source term becomes a nonlinear function of burnup beyond this burnup, a new algorithm was developed to predict expected response from the SFNC at measurement locations covering the entire range of burnups, cooling times, and initial enrichments. With the aid of a static database of parameters including intrinsic sources and energy group-wise detector response functions, as well as explicit spent fuel information including burnups, cooling times, enrichment types, and spacing between fuel assemblies, an expected response for any given location can be calculated by summing the contributions from the relevant neighboring fuel assemblies. Thus, the new algorithm maps the expected responses across the various pools providing inspectors with a visual aid in verifying the presence of the spent fuel assemblies. This algorithm has been fully integrated into a standalone application built in LabVIEW. The GUI uses a step-by-step approach to allow the end-user to first calibrate the predicted database against a set of measurements with SFNC at selected locations where spent fuel is present. Once the database is calibrated it can be used to detect gross defects by comparing the measured signal to the one predicted by the database with differences beyond a set tolerance indicating missing fuel.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

An R shiny graphical user interface for highprecision mass spectrometric data analysis

• There is currently a lack of software that meets the needs for the analysis of raw data produced by modern isotope ratio mass spectrometers for both R&D and routine use at SRNL and other US national labs • Needs to accommodate multiple isotope systems, instruments, and manufacturers • Include modern statistical methods and handling/visualization of uncertainty • Flexible software with transparent (no “black box”) and reproducible methods • This project is inspired by existing discipline-specific data analysis software (e.g., Tripoli1 , ET_Redux2, IsoplotR3) used in the geochemical community • Our goal is to build an open source data analysis software package that focuses on flexibility, transparency, and reproducibility

LABONE, ELIZABETH↗