Search NASA⌕ Search

SEARCH · Search NASA

Results for “HYPERBOLIC SPACE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
NASA NTRS1966

Project Fire photographic summary and record of reentry phenomena at hyperbolic velocities

Project Fire was undertaken by the National Aeronautics and Space Administration to measure the total and radiative heating experienced by a blunt body reentering the earth's atmosphere at 11 300 meters per second. This report presents a photographic record of the Fire II spacecraft during its reentry. The photographs were clear enough to establish the times of major events, and they show that adequate-separation was maintained between the reentry package and the spent Antares. This report also identifies operational problems encountered in spacecraft reentry at hyperbolic velocities and presents the solutions satisfactorily employed.

Reentry vehicle↗
NASA NTRS1986

Transformation of two and three-dimensional regions by elliptic systems

Efforts in transferring computational work from the LRC computer to the IRIS Graphics Workstation at MSU are reported and the computation of a conservative solution of a simple hyperbolic equation on an overlapping grid is discussed. Several conclusions concerning computations on overlapping grids are apparent. Problems only occur when there is a major difference in grid spacing on the individual component grids. In the case of hyperbolic equations, it is necessary that both interpolation and extrapolation be applied at the grid boundaries. When interpolated values are used at outflow boundary points, excessive oscillations in the numerical solution may be the result. The same conclusions would be valid for more complicated systems of hyperbolic equations such as the Euler equations for inviscid flow. Some of the solution values would be extrapolated at the overlap boundary, the exact number depending on the number of characteristics pointing out of the overlap region. It is also possible that similar boundary conditions may be needed for some parabolic equations such as high Reynolds number viscous flow equations. Efforts were also expended on the development of three-dimensional conservative interpolation procedures. Finally, the investigation of grid smoothing procedures were initiated during this reporting period. It was decided that the first grid smoothing algorithms will be based on the concepts of variational grid generation.

Mastin, C. W.↗
NASA NTRS1992

Numerical methods for the simulation of complex multi-body flows with applications for the integrated Space Shuttle vehicle

The following papers are presented: (1) numerical methods for the simulation of complex multi-body flows with applications for the Integrated Space Shuttle vehicle; (2) a generalized scheme for 3-D hyperbolic grid generation; (3) collar grids for intersecting geometric components within the Chimera overlapped grid scheme; and (4) application of the Chimera overlapped grid scheme to simulation of Space Shuttle ascent flows.

Chan, William M.↗
NASA NTRS1980

Initial boundary value problems for the method of lines

This paper treats the stability of the initial boundary value problem for the method of lines applied to hyperbolic and parabolic partial differential equations in one space dimension. The theory treats the case of variable coefficients and allows for very general boundary conditions. Several examples are given which illustrate the theory. The theory is analogous to that developed by Gustafsson, Kreiss, and Sundstrom for finite-difference methods.

Strikwerda, J. C.↗
NASA NTRS1992

Essentially nonoscillatory postprocessing filtering methods

High order accurate centered flux approximations used in the computation of numerical solutions to nonlinear partial differential equations produce large oscillations in regions of sharp transitions. Here, we present a new class of filtering methods denoted by Essentially Nonoscillatory Least Squares (ENOLS), which constructs an upgraded filtered solution that is close to the physically correct weak solution of the original evolution equation. Our method relies on the evaluation of a least squares polynomial approximation to oscillatory data using a set of points which is determined via the ENO network. Numerical results are given in one and two space dimensions for both scalar and systems of hyperbolic conservation laws. Computational running time, efficiency, and robustness of method are illustrated in various examples such as Riemann initial data for both Burgers' and Euler's equations of gas dynamics. In all standard cases, the filtered solution appears to converge numerically to the correct solution of the original problem. Some interesting results based on nonstandard central difference schemes, which exactly preserve entropy, and have been recently shown generally not to be weakly convergent to a solution of the conservation law, are also obtained using our filters.

Lafon, F.↗
NASA NTRS1983

Computations of two-phase supersonic nozzle flows by a space-marching method

A practical method for efficiently analyzing the two-phase flow field in the supersonic region of an axisymmetric rocket nozzle is presented. The governing hyperbolic equations for the gas- and particle-phases are simultaneously integrated downstream using a space-marching procedure. Both one- and two-phase flow computations are performed for the JPL axisymmetric nozzle. The results show the nonequilibrium effects which are due to the existence of particles in the flow. The comparisons with the experimental data and other numerical solutions are made to examine the accuracy of the present method.

Fujii, K.↗
NASA NTRSDate not supplied

An Automated Marching Scheme for Overset Structured Surface Mesh Generation

Starting with a Boundary Representation (BRep) of the geometry of an aerospace vehicle, an automated marching scheme is presented for generation of structured overset surface meshes. First, a pre-processing step automatically generates discrete representations of the BRep faces and BRep edges by tessellating in parameter space. Topological connectivity between the discretized BRep edges is then established, followed by automatic grid point distribution on these edges based on local turning angle, proximity to sharp geometric features, and prescribed maximum stretching ratio and grid spacing. A set of initial curves for algebraic or hyperbolic marching on a surface is then derived from the redistributed edge curves. A spatially-variable marching distance together with a grid point distribution in the marching direction are automatically determined for each initial curve. A set of overset surface meshes that covers the entire geometry is then obtained by combining the surface meshes around the BRep edges, and the structured meshes derived from the discretized BRep faces

Shishir A Pandya↗
NASA NTRS1992

An efficient and robust grid optimization algorithm

The development of an efficient and robust grid optimization is presented. This algorithm is developed by combining the best characteristics of algebraic, elliptic, and hyperbolic grid generation techniques. This development is based on the following observations and evaluations: (1) algebraic systems are fast and economical; (2) precise spacing control is always achieved; (3) grid generation by elliptic systems is always smooth; and (4) the hyperbolic system preserves the orthogonality at the solid boundary and the point distribution in the field. Computational examples representing practical internal flow configurations are presented to demonstrate the algorithm.

Soni, Bharat K.↗
NASA NTRS2014

Sedimentology of Martian Gravels from Mardi Twilight Imaging: Techniques

Quantitative sedimentologic analysis of gravel surfaces dominated by pebble-sized clasts has been employed in an effort to untangle aspects of the provenance of surface sediments on Mars using Curiosity's MARDI nadir-viewing camera operated at twilight Images have been systematically acquired since sol 310 providing a representative sample of gravel-covered surfaces since the rover departed the Shaler region. The MARDI Twilight imaging dataset offers approximately 1 millimeter spatial resolution (slightly out of focus) for patches beneath the rover that cover just under 1 m2 in area, under illumination that makes clast size and inter-clast spacing analysis relatively straightforward using semi- automated codes developed for use with nadir images. Twilight images are utilized for these analyses in order to reduce light scattering off dust deposited on the front MARDI lens element during the terminal stages of Curiosity's entry, descent and landing. Such scattering is worse when imaging bright, directly-illuminated surfaces; twilight imaging times yield diffusely-illuminated surfaces that improve the clarity of the resulting MARDI product. Twilight images are obtained between 10-30 minutes after local sunset, governed by the timing of the end of the no-heat window for the camera. Techniques were also utilized to examine data terrestrial locations (the Kau Desert in Hawaii and near Askja Caldera in Iceland). Methods employed include log hyperbolic size distribution (LHD) analysis and Delauney Triangulation (DT) inter-clast spacing analysis. This work extends the initial results reported in Yingst et al., that covered the initial landing zone, to the Rapid-Transit Route (RTR) towards Mount Sharp.

sedimentologic↗
NASA NTRS1984

Universal single level implicit algorithm for gasdynamics

A single level effectively explicit implicit algorithm for gasdynamics is presented. The method meets all the requirements for unconditionally stable global iteration over flows with mixed supersonic and supersonic zones including blunt body flow and boundary layer flows with strong interaction and streamwise separation. For hyperbolic (supersonic flow) regions the method is automatically equivalent to contemporary space marching methods. For elliptic (subsonic flow) regions, rapid convergence is facilitated by alternating direction solution sweeps which bring both sets of eigenvectors and the influence of both boundaries of a coordinate line equally into play. Point by point updating of the data with local iteration on the solution procedure at each spatial step as the sweeps progress not only renders the method single level in storage but, also, improves nonlinear accuracy to accelerate convergence by an order of magnitude over related two level linearized implicit methods. The method derives robust stability from the combination of an eigenvector split upwind difference method (CSCM) with diagonally dominant ADI(DDADI) approximate factorization and computed characteristic boundary approximations.

Lombard, C. K.↗
NASA NTRS1989

Domain decomposition methods for systems of conservation laws: Spectral collocation approximations

Hyperbolic systems of conversation laws are considered which are discretized in space by spectral collocation methods and advanced in time by finite difference schemes. At any time-level a domain deposition method based on an iteration by subdomain procedure was introduced yielding at each step a sequence of independent subproblems (one for each subdomain) that can be solved simultaneously. The method is set for a general nonlinear problem in several space variables. The convergence analysis, however, is carried out only for a linear one-dimensional system with continuous solutions. A precise form of the error reduction factor at each iteration is derived. Although the method is applied here to the case of spectral collocation approximation only, the idea is fairly general and can be used in a different context as well. For instance, its application to space discretization by finite differences is straight forward.

Quarteroni, Alfio↗
NASA NTRS1994

Possible consequences of absence of Jupiters in planetary systems

The formation of the gas giant planets Jupiter and Saturn probably required the growth of massive approximately 15 Earth-mass cores on a time scale shorter than the approximately 10(exp 7) time scale for removal of nebular gas. Relatively minor variations in nebular parameters could preclude the growth of full-size gas giants even in systems in which the terrestrial planet region is similar to our own. Systems containing 'failed Jupiters,' resembling Uranus and Neptune in their failure to capture much nebular gas, would be expected to contain more densely populated cometary source regions. They will also eject a smaller number of comets into interstellar space. If systems of this kind were the norm, observation of hyperbolic comets would be unexpected. Monte Carlo calculations of the orbital evolution of region of such systems (the Kuiper belt) indicate that throughout Earth history the cometary impact flux in their terrestrial planet regions would be approximately 1000 times greater than in our Solar System. It may be speculated that this could frustrate the evolution of organisms that observe and seek to understand their planetary system. For this reason our observation of these planets in our Solar System may tell us nothing about the probability of similar gas giants occurring in other planetary systems. This situation can be corrected by observation of an unbiased sample of planetary systems.

Wetherill, George W.↗
NASA NTRS2010

Interplanetary Mission Design Handbook: Earth-to-Mars Mission Opportunities 2026 to 2045

The purpose of this Mission Design Handbook is to provide trajectory designers and mission planners with graphical information about Earth to Mars ballistic trajectory opportunities for the years of 2026 through 2045. The plots, displayed on a departure date/arrival date mission space, show departure energy, right ascension and declination of the launch asymptote, and target planet hyperbolic arrival excess speed, V(sub infinity), for each launch opportunity. Provided in this study are two sets of contour plots for each launch opportunity. The first set of plots shows Earth to Mars ballistic trajectories without the addition of any deep space maneuvers. The second set of plots shows Earth to Mars transfer trajectories with the addition of deep space maneuvers, which further optimize the determined trajectories. The accompanying texts explains the trajectory characteristics, transfers using deep space maneuvers, mission assumptions and a summary of the minimum departure energy for each opportunity.

Burke, Laura M.↗
NASA NTRS1994

Star Passages Through the Oort Cloud

Random passing stars regularly penetrate the Oort cloud, resulting in major perturbations to the orbits of comets there.

major perturbations to orbits of comets hyperbolic↗
NASA NTRS1984

Spectral methods in time for hyperbolic equations

A pseudospectral numerical scheme for solving linear, periodic, hyperbolic problems is described. It has infinite accuracy both in time and in space. The high accuracy in time is achieved without increasing the computational work and memory space which is needed for a regular, one step explicit scheme. The algorithm is shown to be optimal in the sense that among all the explicit algorithms of a certain class it requires the least amount of work to achieve a certain given resolution. The class of algorithms referred to consists of all explicit schemes which may be represented as a polynomial in the spatial operator.

Tal-Ezer, H.↗
DOE OSTI2024

Medial axis and local thickness computation using the Fast Sweeping Method

This report describes an efficient and robust voxel-based methodology for computing the medial axis, local thickness, and distance-to-skeleton of arbitrary three-dimensional geometries. It is assumed that the object can be represented by an exact or approximate signed distance function on a discrete grid. The gradient of such function is used to formulate a hyperbolic partial differential equation (PDE) that models the collapse of the position vector in space. By exploiting the causality property of the PDE, the Fast Sweeping Method is able to obtain the solution in a finite number of sweeps independent of the mesh resolution. The intersection of characteristic lines leads to the formation of shocks and a discrete bisector function is used to identify the medial axis. The same PDE approach is used to compute the local thickness inside the object and obtain the distance-to-skeleton field. Multiple examples are given in two and three dimensions along with a resolution study. The methodology has optimal complexity and yields subsecond computational times for geometries with over a million zones on a single core. The methodology is also capable of parallelization across shared and distributed memory architectures.

97 MATHEMATICS AND COMPUTING↗
NASA NTRS1994

Trajectory-based heating analysis for the European Space Agency/Rosetta Earth Return Vehicle

A coupled, trajectory-based flowfield and material thermal-response analysis is presented for the European Space Agency proposed Rosetta comet nucleus sample return vehicle. The probe returns to earth along a hyperbolic trajectory with an entry velocity of 16.5 km/s and requires an ablative heat shield on the forebody. Combined radiative and convective ablating flowfield analyses were performed for the significant heating portion of the shallow ballistic entry trajectory. Both quasisteady ablation and fully transient analyses were performed for a heat shield composed of carbon-phenolic ablative material. Quasisteady analysis was performed using the two-dimensional axisymmetric codes RASLE and BLIMPK. Transient computational results were obtained from the one-dimensional ablation/conduction code CMA. Results are presented for heating, temperature, and ablation rate distributions over the probe forebody for various trajectory points. Comparison of transient and quasisteady results indicates that, for the heating pulse encountered by this probe, the quasisteady approach is conservative from the standpoint of predicted surface recession.

RADIATIVE ABLATING FLOWFIELD A↗